Beruflich Dokumente
Kultur Dokumente
PRESENTATION CONTENTS
1) INTRODUCTION : ENVIROTAC II 2) CONCEPT DESCRIPTION 3) THE PRODUCT ENVIROTAC II 4) THE EQUIPMENT TEREX Reclaimers 5) ROAD CONSTRUCTION DETAILS - CONVENTIONAL METHOD VS NEW CONCEPT 6) THE ENVIRONMENT & CARBON FOOTPRINT 7) CONCEPT APPLICATION AREAS 8) CONCLUSION - QUESTIONS
1) INTRODUCTION : ENVIROTAC II
Road Construction Consultancy & Project Management Turnkey Projects in cooperation with Road Construction Companies Provide product & equipment for implementation according to revolutionary concept Provide extensive Warranties for Combined Materials executed by Smart Construction Solutions (M) SDN BHD Guarantee shorter Project Time-frame Guarantee lower Project Costs Product & procedures are safe for the Environment and reduce Carbon Footprint
2) CONCEPT DESCRIPTION
WATER + PRODUCT
TEREX RS600C
2) CONCEPT DESCRIPTION
Designed to solidify non-organic soils resulting in increased strength & ductility compared with conventional constructed road base layers. Eliminates the need for import of large volumes aggregates currently used for road base
made in U.S.A
IMPORTANT NOTE:
ENVIROTAC II is currently the only global available liquid soil-stabilizing product
able to solidify soils in extreme saline environment and does not require other binding materials such as Portland Cement or lime/fly-ash.
Diluted in fresh, salt or grey-water at an average mix-ratio 4 ltr H2O : 1 ltr Envirotac II
ENVIROTAC II eliminates the need for import of large volumes aggregates for road base
ENVIROTAC II mixed directly with in-situ soil (sand only!)and added carbon dye for coloring 4,500 m2 completed in less than 4 hours and ready for striping and traffic after 24 hours ASPHALT PAVING NOT NECESSARY
Microprocessor controlled pump for calibrated injection of Envirotac II/H2O into milled soil.
Thorough compaction immediate after mixing ENVIROTAC II with in-situ pre-compacted soils
Treated areas ready for traffic and/or asphalt paving after 12 to 24 hours curing
ALTERNATIVE APPLICATION METHOD Asphalt Recycling: Most recent developments and executed projects in U.S.A have also shown that on-the-spot recycling of asphalt (full depth asphalt recycling) using the TEREX RS600C and TEREX RS950b while mixing Envirotac II and Carbon (for coloring) directly with the on-site milled materials results in a new road surface after compaction with equal appearance as new asphalt however better in strength and performance. One single TEREX Reclaimer can process up to 15,000m2 in one day operation. The treated areas are ready for traffic after 12 to 24 hours curing!
Microprocessor controlled pump for calibrated injection of Envirotac II/H2O and Carbon (for coloring) into milled asphalt and soil.
Damaged Asphalt
Reclaimed Asphalt/Road Base Materials mixed with Envirotac II & Carbon (for coloring) will after compaction result in a new improved pavement layer. Conventional asphalt paving is therefore not necessary.
crushing old asphalt for discard or complicated recycling methods NOT NECESSARY!
CONVENTIONAL METHOD
ENVIROTAC II is completely harmless for the environment and is used in eco-sensitive areas
SMART CONSTRUCTION SOLUTION CONCEPT (ENVIROTAC II + TEREX Reclaimers) reduces Carbon Footprint
Construction of un-paved farm roads and other areas where asphalt pavement not required
Construction of storage areas and service roads for onshore oil & gas drilling sites
Able to solidify total upper layer of artificial satellite islands in order to create efficient storage areas, infrastructures and foundations for other construction activities.
EXTENSIVE WARRANTIES FOR THE COMBINED MATERIALS EXECUTED BY SMART CONSTRUCTION SOLUTIONS (M) SDN BHD
Envirotac II
QUESTIONS?