Beruflich Dokumente
Kultur Dokumente
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1
[GeoStructural Analysis - MSE Wall | version 5.16.14.0 | Copyright 2013 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
No. 2 3 4 5
Layer [m]
Assigned soil
Pattern
0,82 Silty sand (SM) 1,86 Low plasticity clay (CL,CI), consistency 1,09 Low plasticity clay (CL,CI), consistency soft Low plasticity clay (CL,CI), consistency soft
Terrain profile Terrain behind construction has the slope 1: 4,01 (slope angle is 14,00 ). Embankment height is 0,12 m, embankment length is 0,50 m. Settings of the stage of construction Design situation : permanent
Verification No. 1
Forces acting on construction Name Gravity force Active pressure Verification of complete wall Check for overturning stability Resisting moment Mres = 1002,10 kNm/m Overturning moment Movr = 326,59 kNm/m Safety factor = 3,07 > 1,50 Wall for overturning is SATISFACTORY Check for slip Resisting horizontal force Hres = 339,80 kN/m Active horizontal force Hact = 159,25 kN/m Safety factor = 2,13 > 1,50 Wall for slip is SATISFACTORY Forces acting at the centre of footing bottom Overall moment M = -194,47 kNm/m Normal force N = 481,03 kN/m Shear force Q = 159,25 kN/m Overall check - WALL is SATISFACTORY Warning - allowable range of input data exceeded during pressure analysis! The analysis is carried out with the modified value of structure inclination a. Fhor [kN/m] 0,00 159,25 App.Pt. z [m] -4,25 -2,05 Fvert [kN/m] 481,03 0,00 App.Pt. x [m] 2,08 5,00 Design coefficient 1,000 1,000
Estabilidad de Taludes con Geogrillas y Geotextiles Daniel Chavez Herbas Angle a1 = a2 = 20,59 81,91
Slope stability check (Bishop) FS = 1,54 > 1,50 Slope stability is SATISFACTORY
3
[GeoStructural Analysis - MSE Wall | version 5.16.14.0 | Copyright 2013 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]