Beruflich Dokumente
Kultur Dokumente
1 June 2008
DIGIMAT TM to Abaqus/CAE: DIGIMAT-MF plug-in interface enables Abaqus/CAE users to: o run DIGIMAT and build a micromechanical material model o predict its behavior o use it as an Abaqus material o post-process the multi-scale analyses results at the macro and micro levels. DIGIMAT-FE uses Abaqus/CAE to generate the RVE mesh and the actual Finite Element model that is then solved with Abaqus/Standard. Model post processing is done in Abaqus/CAE and DIGIMAT.
DIGIMAT TM to Abaqus/Standard: This interface is used to model the thermo-mechanical behavior of composite structures under quasi-static and dynamic loading conditions. In these applications the material can be modeled as anisotropic thermo-elastic, elasto-plastic (with or without damage), visco-elastic, elasto-viscoplastic, hyperelastic or thermohyperelastic.
TM
Courtesy of DSM
DIGIMAT
to Abaqus/Explicit :
This interface is used to model the impact and failure behavior of composite structures. In such applications, anisotropic elastoplastic or elasto-viscoplastic material responses are modeled and failure indicators are used at macro (composite) and micro scales (matrix and/or fibers).
DIGIMAT TM to Abaqus for Reinforced Plastic Parts: DIGIMAT is interfaced to Moldflow, Sigmasoft and Moldex3D injection molding software to enable an accurate and efficient Abaqus FEA of fiber-reinforced plastic parts where DIGIMAT-MF is used to model the nonlinear, anisotropic and rate-dependent behavior of the material taking into account the fiber orientation, residual stresses and temperatures predicted by the injection molding software at each point of the structure.
Failure of Reinforced Plastic Parts: DIGIMAT to Abaqus enables an accurate prediction of the failure of reinforced plastics parts subject to quasi-static or impact loading. This is possible thanks to DIGIMAT-MF capabilities to model: o rate-dependent (i.e. visco-elastic and elasto-viscoplastic) material response o material anisotropy induced by the reinforcement (e.g. fibers) orientation o local material heterogeneity induced by the underlying material microstructure (i.e. fiber length, fiber content). A comprehensive set of failure indicators are available in DIGIMAT-MF and can be applied to the composite (i.e. macro) or to the matrix and/or fiber phases (i.e. micro). These macro and micro failure indicators will drive the element deletion in Abaqus/Explicit.
DIGIMAT to Abaqus/Explicit Courtesy of Nokia
e-Xstream engineering S.A. Rue du Bosquet, 7 B-1348 Louvain-la-Neuve, Belgium +32 (0)10 86 64 25
e-Xstream engineering (L) Ecostart II, Rue du Commerce L-3895, Foetz, Luxembourg +352 26 17 66 10
For more information about DIGIMAT to Abaqus and DIGIMAT material modeling platform, please contact info@e-Xstream.com or visit www.e-Xstream.com.
e-Xstream engineering, eX, eXdigimat are registered trademarks or trademarks of e-Xstream engineering SA. All other brand, product and feature names or trademarks are the property of their respective owners.