Beruflich Dokumente
Kultur Dokumente
waterwell
mounting options
onboard compressor
Dando Watertec 40
The Dando Watertec 40 is a successful deep water well drilling rig used throughout the world and designed for use in the most demanding environments. The 40000kg pullback gives it the ability to drill a large diameter to great depths and is favoured by large aid agencies, government departments and contracting companies. Capable of a wide range of drilling techniques including flooded reverse.
Standard Rotation (max) 140rpm Torque (max) 15360Nm Other options available Rotary head tilt and side shift As standard - Box type drill table with removable drill rod and casing guides. Break out system is a double acting hydraulic cylinder with adjustable wrench Ingersoll Rand XHP 900 (900CFM/350psi) Maximum single line pull: 8000kgs Maximum single line pull: 2040kgs Standard: Hydraulically driven 71/2" x 8" duplex mud pump Other options available Standard: Hydraulically driven triplex pump Maximum speed: 27m/minute Maximum speed: 40m/minute Other options available Other options available Drum capacity: 83m of 18mm wire rope Drum capacity: 57m of 12mm wire rope
Maximum flow rate: (420gpm) 1590 litres/minute Maximum discharge pressure: 182psi Maximum flow rate: 34 litres/minute Maximum discharge pressure: 750psi
Foam Pump Inline Oil Lubricator Hydraulic System Drillers Control Panel Levelling Jacks Lighting and Electrical System Drilling Capacities* Optional Equipment
Fitted as standard and used when operating a DTH hammer Hydraulic power circuit based on load sensing hydraulic pumps and proportional control valves Uncomplicated and user friendly with ergonomic layout Two front and two rear jacks with individual locking valves Rig is provided with mast and control panel lighting and the electrical system is 24 volt 31/2" (13.5kgs/m) drill rod = 2000m 41/2" (23kgs/m) drill rod = 1300m RC Drilling Conversion Kit - For reverse circulation drilling and flooded reverse drilling applications Pipe Handling Boom Crane - For loading and unloading drill pipe and light site work Rod Spin Safety Guard - Optional Other Options available on request
Please note: All figures and claims made here are indicative and Dando Drilling International reserves the right to make alterations to specification detail without notice. All images are for reference only and may not represent the exact specification outlined in this document.
Dando Drilling International Limited www.dando.co.uk info@dando.co.uk tel: +44 (0)1903 731312 fax: +44 (0)1903 730305