0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
71 Ansichten3 Seiten
This project proposal outlines a simple solar panel sun tracker designed to increase the efficiency of solar panels by positioning them perpendicular to the sun using light sensors and servos. The tracker uses four light sensors, one in each corner of the solar panel, connected to a microcontroller. The microcontroller determines the position of the sun based on sensor readings and signals servos to rotate the panel accordingly. At the end of the day, the panel automatically returns to its initial position.
This project proposal outlines a simple solar panel sun tracker designed to increase the efficiency of solar panels by positioning them perpendicular to the sun using light sensors and servos. The tracker uses four light sensors, one in each corner of the solar panel, connected to a microcontroller. The microcontroller determines the position of the sun based on sensor readings and signals servos to rotate the panel accordingly. At the end of the day, the panel automatically returns to its initial position.
This project proposal outlines a simple solar panel sun tracker designed to increase the efficiency of solar panels by positioning them perpendicular to the sun using light sensors and servos. The tracker uses four light sensors, one in each corner of the solar panel, connected to a microcontroller. The microcontroller determines the position of the sun based on sensor readings and signals servos to rotate the panel accordingly. At the end of the day, the panel automatically returns to its initial position.
COMSATS Institute of Information Technology Abbottabad
Department of Electrical Engineering
Course Title: Control System Instructor: Yousuf Murtaza Rind Class: BEE-6B
Assignment # 01
Name: Haroon Ahmed Registration No: FA11-BEE-054
March 31, 2014
PROJECT PROPOSAL
SOLAR PANEL SUN TRACKER
Abstract: It is simple sun tracker to position the solar panel according to position of sun. The purpose of this project is to increase the efficiency of solar panel. We can do it by positioning the solar panel perpendicular to the sun. There are 4 light sensors on each corner of solar panel. The microcontroller takes the decision to move the panel according to how much sensors are in sun light. Then signal is generated to rotate the servo at required angle. When day was passed the solar panel automatically move to initial position where it was at start of the day. Block Diagram: