Beruflich Dokumente
Kultur Dokumente
Description
The Edge Connector portfolio has been designed specifically for use in telecommunication circuits wherever high density connectivity is required between a Printed Circuit Board and cable wires. The Edge Connector (EC) plugs directly onto a Printed Circuit Board (PCB) to connect a cable harness or individual wires. The cable wires are connected using the tried and tested LSA-PLUS contacts. Wire guide loops ensure orderly routing of the wires, making cable management simple and more effective. An overview of the variety of sizes, pair counts and connection types is given in the table below.
EC Type Pair counts / add contact Connection Disconnection Required PCB thickness
TECHNICAL DATA
EC EC EC EC EC
25 20 17 17 14
24 20 16 16 14
/ / / / /
1 0 1 1 0
Installation
Whether in industrial electronics, regulation or control technology, telemetry or input circuits of PBX systems, the LSA-PLUS Edge Connector can be effectively used in all applications where cable wires with a conductor diameter of 0.4mm to 0.6 mm are directly connected to printed circuit boards.
Technical Assistance Europe & Middle East +32 2 712 6542 euro.tac@adckrone.com
www.adckrone.com
LSA-PLUS
07/07
300210BE
www.adckrone.com
+49-30-8453-1818
+49-30-8453-1703
LSA-PLUS
Edge Connector
Printed circuit board characteristics Thickness Contact area Coating thickness of strip lines Strip lines Frequency of connection of EC onto PCB 1.2mm 0.12mm 1.5mm 0.13mm tin-plated 5m (minimum) on both sides of the PCB 5 times
EC EC EC EC EC
Type 25 20 17 14
Dimensions, in mm
Dimensions, in mm
07/07
300210BE
www.adckrone.com
+49-30-8453-1818
+49-30-8453-1703
Ordering Information Description EC 25 with connection contact, for use onto 1.2 mm PCB EC 25 with disconnection contact, for use onto 1.2 mm PCB EC 20 with connection contact, for use onto 1.5 mm PCB, enhanced EC 17 with connection contact, for use onto 1.2 mm PCB EC 17 with disconnection contact, for use onto 1.2 mm PCB EC 17 with connection contact, for use onto 1.5 mm PCB EC 17 with connection contact, for use onto 1.5 mm PCB, enhanced EC 14 with connection contact, for use onto 1.5 mm PCB Accessories Accessories, Test cord, 2-pole Accessories, Test cord, 4-pole 1) Accessories, Test cord, 2-pole, with open leads Accessories, Patch cord, 2-pole Accessories, Disconnection plug
1) 2)
Catalogue Number 6623 2 022-xx 6623 2 027-xx LSA-6623 2 040-xx 6623 2 020-xx 6623 2 026-xx 6623 2 028-xx LSA-6623 2 041-00 6623 2 036-10 6623 2 023-00 6623 2 030-00 6623 2 033-00 6623 2 024-00 6623 3 050-00 LSA-6623 2 052-02 LSA-6623 2 017-02
2)
Accessories, Changeover adapter, 2-pole, 2m; EC to open leads Accessories, Changeover adapter, 2-pole, 2m; EC to Series2 2) Accessories, Changeover adapter, 2-pole, 2m; EC to SeriesNT Accessories, Test cord, 2-pole; 200mm
2)
Technical Data
1) Only for disconnection modules like 6623 2 027-xx 6623 2 026-xx 2) Only for connection modules like LSA-6623 2 040-00; LSA-6623 2 040-50; LSA-6623 2 041-00
Web Site: www.adckrone.com EMEA Office: ADC GmbH, Beeskowdamm, 3-11, 14167 Berlin, Germany Phone: +49 30 8453-1818 Fax: +49 30 8453-1703. For a listing of all ADC KRONEs global sales office locations, please refer to our web site. UK Office: ADC Communications (UK) Ltd., Runnings Road, Kingsditch Trading Estate, Cheltenham, Gloucestershire GL51 9NQ, United Kingdom Phone: +44 (0) 1242 264 400 Fax: +44 (0) 1242 264 488 contactuk@adckrone.com
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC KRONE reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting ADC GmbH headquarters in Berlin. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Part Number 300210BE Jul 07 Original 2007 ADC Telecommunications Inc. All Rights Reserved