Beruflich Dokumente
Kultur Dokumente
Technical Agreement
()
Technical parameters
Model Basket Screen area m2 Adjustable angle Screen type Vibration motion G force Drive mode S250-1 3 pcs screen structure 2.5 -1 to +3 Pre-tension hook strip screen Linear 7g BRANDT King Cobra 3 pcs screen structure 3.1 -2to +2 VNM Linear 6.1
Exciting motor self-synchronization Exciting motor self-synchronization drive drive 22.5hp 315617781625 2428
Technical description
Linear shale shaker has dual-synchronous motors. Synchronous rotation in reverse directions can create a linear exciting force to separate drilling fluids and to facilitate transportation of solids contained. The S250-1 Linear shakers have larger vibration indexes and vibrating amplitudes to accelerate sand removal speed. The shaker uses two explosion-proof electrical vibrators, which has high reliability; use import explosion-proof electrical equipments; adjustable basket. Features of Linear shaker:
1. Linear shakers have simplified structure, reliable performance, stable vibration and low noise. 2. With significant vibrating force and maximum vibration index of 7g, linear shakers are characterized by rapid sand removal. These shakers can be used for processing of large volumes of cuttings.
S250series shaker 7g
King Cobra
6.1
4 complete machine
Weight
kg
3400
Weight
kg
3587 304822102692
Technical description
Mud cleaner is a combination of desander, desilter and shale shaker. By combine two-stages of purification within one shale shaker, it can effectively process all drilling fluids, and use bigger screen area increase screen mesh, recover drilling liquid. It can be used to closed loop mud system, waste water purification, dehydration of mud in river, liquid purification and recovery, and
so on. Desilter cyclones are made of polyurethane materials, which can provide them with higher wear resistance, light weight, longer service life and other desirable features. Cone elements of desander are made of wear-resisting manganese nodular cast iron with high wear resistance, high strength and high temperature resistance.
XQJS3002-10016G
Model Separator Dia. (mm) Design pressure (MPa) Max. Drilling liquid handling capacity (m /h) Max. Gas handling capacity (m3/h) Inlet pipe ID. (mm) Outlet pipe ID. (mm) Air vent pipe ID. (mm) Outside dimension L W H mm Weight kg
3
YQF-1200/1.5 1200 1.5 400 10000 100 300 300 901123002250 3000
Technical description
YQF series liquid/gas separator is specially developed equipment for separation of gas and liquids in gas-bearing mud. The gas bearing mud returned from the manifold of interceptor manifold will enter the knockout drum via the inlet manifold of the gas-liquid separator, the mud will disperse by striking the divider firstly, and then drop down to a chain of baffle plates, the mud will flow from top to bottom on the baffle plate, resulting in turbulent condition. Some gas will be separated from the mud according to the principle of gas and liquid sedimentation as well as decompression expansion. The mud will flow through larger area on the baffle plate through multiple baffling and separate into thin layer on baffle plate, with bubble exposing on the mud surface, which enables the separation of gas from mud. The free gas will be discharged to safe area through the exhaust manifold on the top of tank, the deaerated mud will be discharged to mud distributor, shale shaker or skim tank through discharge opening.
Model Handling capacity m3/h Rated vacuum degree MPa Explosion-proof grade Power kW Main motor Rotate speed r/min Power kW Vacuum pump Degree MPa Weight kg Outside dimension LWHmm of vacuum
-0.08
800 193512052150
Technical description
ZLCQ series vacuum centrifugal degasser adopts vacuum degassing, collision and enhancement of umbrella flow area to remove gases contained, especially suitable for removal of free gases contained in drilling fluids. Mud can be sprayed at high speed to the walls through the square openings in the drive pipe. In this way, gas bubbles contained can be smashed thoroughly to achieve better degassing performance. Through rotation of impellers within the case, it is possible to discharge fluids contained. At the same time, through thorough stirring of the fluid, it is possible to discharge gas contained thoroughly. With compact structure, the entire system has lower power consumption.