Beruflich Dokumente
Kultur Dokumente
Whisper Pumps
Automation Technology
This catalog introduces a new line of enhanced performance variable displacement pressure compensated vane pumps from Bosch. The pumps are designed to meet the requirements of the machine tool, general machinery, and other markets where low noise, high performance and competitive pricing are needed. The design of the VPV series of vane pumps utilizes 30 years of field and manufacturing experience from the current Bosch vane pump line. State-of-the-art technologies and materials were utilized while retaining the superior features of the existing designs. Additional goals were to create a pump with the international market in mind and to incorporate the extremely high quality standards the Bosch name has come to exemplify. Keeping in mind market expectations, Bosch developed a pump with the following improvements and features: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. High reliability with fewer parts. Significant advances in noise reduction. High volumetric and overall efficiency. Excellent durability. Modern appearance. Improved ring and vane wear technology. Very good response and recovery times. Generally reduced envelope size. Redesigned controls with shock clipper. Conforms to the latest SAE, ISO, NFPA, and ANSI standards. Combination capability - full horsepower may be transferred to pump 2. Combinations of construction of multiple pumps may be required to be de-rated.
Benefits
LOW COST - Competitively priced with other manufacturers of vane pumps and economy axial piston pumps. EXCEPTIONALLY QUIET - Helps machinery builders meet government and purchased sound level requirements. CONTINUOUS DUTY RATING - @ 3,000 PSI - High performance and long life design for 10,000 plus hours. HIGHLY EFFICIENT FAST RESPONSE & RECOVERY - Exceptional reaction time for critical system demands. PRESSURE COMPENSATED - Controls pump delivery to circuit demand thereby conserving energy. HIGH STRENGTH - Computer optimized casting design. HYDRODYNAMIC JOURNAL BEARINGS - Provides long life and quiet operation. NO PREFILL REQUIREMENTS - Pump case prefill not required for initial start-ups. REPAIRABLE - Repair kits and parts available from local distribution centers or the factory. CONTROL OPTIONS - Single stage; two-stage, remote control; solenoid multi-pressure; load sensing; solenoid; torque limiting and elecronic proportional. SHOCK CLIPPER - Reduces shock pressure by up to 50% increasing system component life and system stability. Must be plumbed on VPV 16, 25, & 32. The shock clipper is integrated into VPV 45, 63, 80, 100, 130, & 164 and drains to the case drain. See page 97.
Maximum inlet vacuum at sea level Mounting2 - SAE 2-bolt flange (ISO 3019/1) Mounting Position
Pump to be connected to prime mover by means of a flexible coupling that is aligned to a maximum of .006 (.152mm) total indicator reading. No overhung or side loads permitted. Alignments greater than .006 indicator reading could cause increased noise and vibration as well as premature shaft seal wear resulting in leakage. A premium quality hydraulic oil with anti-wear additives is recommended, but not required. Refer to publication S-106 Petroleum Hydraulic Fluids for a list of fluids which meet or exceed the necessary lubrication requirements. Consult factory for use with water base fire resistant fluids. Minimum 100 SUS (21 cSt) 1000 SUS (216 cSt) 150-250 SUS (32-54 cSt) 4000 SUS (864 cSt) Normal inlet fluid temperature should not exceed 140F (60 C). Always select a fluid for optimum viscosity at operating temperature. Consult factory for applications assistance when inlet fluid temperatures over 140 F (60 C) are expected. Fluorocarbon Standard Fluid cleanliness per ISO/DIS 4406 should be 18/15 or better for pressures of 2000 psi or less. For continuous operating pressures of 2000 to 3000 psi, fluid cleanliness should be 17/13 or better. Full flow to minimum flow Minimum flow to full flow Single stage Two stage 50-135 ms single stage compensator 34 lbs. (16.5 kg) 38 lbs. (17.3 kg) 70-185 ms single stage compensator 61 lbs. (28 kg) 65 lbs. (28.5 kg) 20-35 ms 20-35 ms Maximum Optimum Maximum start-up
Fluid recommendations
Seals Filtration
1 2
Flows are actual. Volumetric efficiencies shown in technical data taken into account. Metric 4-bolt flange available (ISO 3019/2) available. Please consult factory.
VPV 45 2.75 in3/rev (45 cm3/rev) 20.83 GPM (72.84 L/min) Two stage
VPV 63 3.84 in3/rev (63 cm3rev) 29.10 GPM (110.1 L/min) 3000 psi (210 bar)
VPV 80 4.88 in3/rev (80 cm3/rev) 5.02 in3/rev (82.3 cm3/rev) 36.97 GPM (139.9 L/min)
Maximum continuous pressure Pressure compensating range Maximum transient spike pressure Maximum case pressure Speed range Direction of rotation (viewed from shaft end) Case drain flow while compensating @ 1800 RPM
2
350-3000 psi (24-210 bar) Minimum pressure of 300 PSI 4000 psi (280 bar) 10 psi (0.7 bar) 1150-1800 RPM Right hand (clockwise) 1.5 GPM (5.7 L/min) 1.9 GPM (7.2 L/min) 2.5 GPM (9.5 L/min) 1.4 GPM (5.3 L/min) 1.8 GPM (6.8 L/min) 2.4 GPM (9.1 L/min) 6 in. HG (152 mm HG) S.A.E. C 2-Bolt flange Unrestricted 2 S.A.E. 1 1/4 S.A.E. flange S.A.E. = #8 S.A.E. S.A.E. = #4 S.A.E. Pump to be connected to prime mover by means of a flexible coupling that is aligned to a maximum of .006 (.152mm) total indicator reading. No overhung or side loads permitted. Alignments greater than .006 indicator reading could cause increased noise and vibration as well as premature shaft seal wear resulting in leakage. A premium quality hydraulic oil with anti-wear additives is recommended, but not required. Refer to publication S-106 Petroleum Hydraulic Fluids for a list of fluids which meet or exceed the necessary lubrication requirements. Consult factory for use with water base fire resistant fluids. 1.4 GPM (5.3 L/min) 1.8 GPM (6.8 L/min) 2.3 GPM (8.7 L/min)
1000 psi (70 bar) 2000 psi (140 bar) 3000 psi (210 bar)
Maximum inlet vacuum at sea level Mounting - SAE 2-bolt flange (ISO 3019/1) Mounting Position Inlet Outlet Port sizes Drive Case drain Remote control (optional)
Fluid recommendations
Minimum Fluid viscosity at operating temperature Fluid temperature Maximum Optimum Maximum start-up
150 SUS (32 cSt) 1000 SUS (216 cSt) 200-300 SUS (43-65 cSt) 4000 SUS (864 cSt) Normal inlet fluid temperature should not exceed 140F (60 C). Always select a fluid for optimum viscosity at operating temperature. Consult factory for applications assistance when inlet fluid temperatures over 140 F (60 C) are expected. Fluorocarbon Standard Fluid cleanliness per ISO/DIS 4406 should be 18/15 or better for pressures of 2000 psi or less. For continuous operating pressures of 2000 to 3000 psi, fluid cleanliness should be 17/13 or better.
Seals Filtration
Full flow to minimum flow Minimum flow to full flow Single stage
Two stage 128 lbs. (58 kg) Flows are actual. Volumetric efficiencies shown in technical data taken into account. 2 Metric 4-bolt flange available (ISO 3019/2) available. Please consult factory.
VPV 100 6.1 in3/rev (100 cm3/rev) 6.0 in3/rev (99 cm3/rev) 45.4 GPM (171.8 L/min) Two stage
VPV 130 7.9 in3/rev (130 cm3rev) 8.0 in3/rev (131 cm3rev) 59.85 GPM (226.5 L/min)
VPV 164 10.0 in3/rev (164 cm3/rev) 10.0 in3/rev (164 cm3/rev) 75.76 GPM (286.7 L/min) 3000 psi (210 bar) 350-3000 psi (24-210 bar) 4000 psi (280 bar)
Maximum continuous pressure Pressure compensating Maximum transient spike pressure Maximum case pressure Speed range Direction of rotation (viewed from shaft end) Case drain flow while compensating @1800 RPM
2
3000 psi (210 bar) 350-3000 psi (24-210 bar) 4000 psi (280 bar) 10 psi (0.7 bar) 1150-1800 RPM Right hand (clockwise) 1.5 GPM (5.7 L/min) 2.0 GPM (7.6 L/min) 2.5 GPM (9.5 L/min) 1.6 GPM (6.0 L/min) 2.2 GPM (8.3 L/min) 3.0 GPM (11.3 L/min) 6 in. HG (152 mm HG) S.A.E. D, 2-bolt flange Unrestricted Inlet Outlet 2 1/2 S.A.E. 1 1/2 S.A.E. S.A.E. = #8 S.A.E. #4 S.A.E.
1000 psi (70 bar) 2000 psi (140 bar) 3000 psi (210 bar)
1.7 GPM (6.4 L/min) 2.3 GPM (8.7 L/min) 3.1 GPM (11.7 L/min)
Maximum inlet vacuum at sea level Mounting - SAE 2-bolt flange (ISO 3019/1) Mounting Position
Pump to be connected to prime mover by means of a flexible coupling that is aligned to a maximum of .006 (.152mm) total indicator reading. No overhung or side loads permitted. Alignments greater than .006 indicator reading could cause increased noise and vibration as well as premature shaft seal wear resulting in leakage. A premium quality hydraulic oil with anti-wear additives is required*. Refer to publication S-106 Petroleum Hydraulic Fluids for a list of fluids which meet or exceed the necessary lubrication requirements. Consult factory for use with water base fire resistant fluids. *Such as Mobil DTE-26, or similar, for pressures over 2000 psi. Minimum 150 SUS (32 cSt) 1000 SUS (216 cSt) 200-300 SUS (42-65 cSt) 4000 SUS (864 cSt) Normal inlet fluid temperature should not exceed 140F (60 C). Always select a fluid for optimum viscosity at operating temperature. Consult factory for applications assistance when inlet fluid temperatures over 140 F (60 C) are expected. Fluorocarbon Standard Fluid cleanliness per ISO/DIS 4406 should be 18/15 or better for pressures of 2000 psi or less. For continuous operating pressures of 2000 to 3000 psi, fluid cleanliness should be 17/13 or better. Full flow to minimum flow Minimum flow to full flow Single stage Two stage 240 lbs. (109 kg) 248 lbs. (112.7 kg) 250-500 ms two stage compensator 20-50 ms Maximum Optimum Maximum start-up
Fluid recommendations
Seals Filtration
1 2
Flows are actual. Volumetric efficiencies shown in technical data taken into account. Metric 4-bolt flange available (ISO 3019/2) available. Please consult factory.
Code Structure The alpha-numeric ordering code system enables any particular type of pump to be specified. Preferred type are also identified by a 10-digit part number for computerized ordering.
Item No. Pump 1 Pump 2*** Pump 3 (Gear Pump) Item No 1 2 R 3 12 15 18 4 A C D 5 3 7 6 V 7 P 8 V K 9 16 25 32 45 63 80 100 130 164 Code 0513 Code Digit Vane Pump, stand alone version single pump or combination Direction of Rotation Clockwise, viewed from shaft end Speed maximum speed; e.g. 1150 rpm = 12 1450 rpm = 15 1750 rpm = 18 Drive Shaft Key to DlN 6885 Key to SAE Standard Spline to SAE 744C Bearing Arrangement / Mounting Flange Standard bearing arrangement, mounting flange to SAE standards Standard bearing arrangement, mounting flange to DIN ISO 3019/2 Principle of Operation Vane Type Mode of Operation Pump Type of Construction Variable displacement pump (open circuit) Fixed Displacement Pump (available in 1998) Displacement 16 cc/rev = .98 cu in/rev 25 cc/rev = 1.53 cu in/rev 32 cc/rev = 1.95 cu in/rev 45 cc/rev = 2.75 cu in/rev 63 cc/rev = 3.84 cu in/rev 80 cc/rev = 4.88 cu in/rev 100 cc/rev = 6.10 cu in/rev 130 cc/rev = 7.93 cu in/rev 164 cc/rev = 10.00 cu in/rev 1 0513 2 R 3 18 4 C 5 3 6 V V HY/Z 7 P P F 8 V V S11/ 9 32 32 14 10 S S R 11 M M 254 12 21 21 13 F F 14 Z Z 15 B02 B02
*** When trailing pump is another VPV pump, it can be coded by selecting items 6 through 15 for the alpha-numeric description. Consult factory for other models and descriptions of trailing pumps. Price and Part Numbers See VPV Pump Identification Guide, Publication # 9 535 233 782 for SAE, and 9 535 233 785 for metric pumps. Product Literature Disclaimer Specifications and/or dimensions are subject to change without prior notice. Please consult factory.
15
On the following pages are line graphs of the Performance Characteristics for each of the pumps in our series. Characteristics are shown at 1200 PSI, 1500 PSI and 3000 PSI. Since different geographical areas require different data, please refer to the appropriate graph.
10
20 (15)
8 (30) 6 (23) 4 (15) 2 (8) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (170) 3000 (210)
INP UT H
16 (12)
OUTPUT FLOW
R WE
P RSE OWE R
OUTPUT FLOW
16 (12) 12 (9)
S OR
O EP
H UT
EP RS
OW
ER
8 (6)
ORS WER EPO
DE
ADH
HO EAD
D DEA
DH HEA
4 (3) 0
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
3500 (240)
in3/rev
(16cm3/rev)
VOLUMETRIC
in3/rev
(16cm3/rev)
VOLUMETRIC
90%
EFFICIENCY
OVERALL
EFFICIENCY
80%
OVERALL
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
1 in3/rev (16cm3/rev)
1 in3/rev (16cm3/rev)
66
66
SPL dB (A)
SPL dB (A)
62
62
FULL
FLOW
58
FULL F
LOW
58
54
EAD DEADH
DEAD
54
HEAD
50
50
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 16 to 3000 PSI (210 Bar) (continued)
11
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
20 (15)
OUTPUT FLOW
8 (30) 6 (23) 4 (15) 2 (8) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (170) 3000 (210)
T PU IN HO R ER OW
P SE
DE
H EAD ADH
1 in3/rev (16cm3/rev)
VOLUMETRIC
EFFICIENCY
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
1 in3/rev (16cm3/rev)
66
SPL dB (A)
62
FU
LL
FLO
58
DEA DHE AD
54
50
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
12
OUTPUT FL
24 (18) 20 (15)
OW
PU
R HO
W PO SE
ER
16 (12)
S OR TH O EP W ER
DEA
AD H DHE
EP ORS
OW
ER
4 (3) 0
DEAD
HEAD
HORS
EP
R OWE
1500 (104)
2000 (140)
2500 (170)
3000 (210)
3500 (240)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
1.5
in3/rev
(25cm3/rev)
VOLUM ETRIC
1.5
in3/rev
(25cm3/rev)
VOLUMET RIC
EFFICIENCY
EFFICIENCY
90%
90%
80%
OVERALL
80%
OVERALL
70%
70%
60%
60%
50%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
1.5
in3/rev
(25cm3/rev)
1.5
in3/rev
(25cm3/rev)
66
66
SPL dB (A)
62
FULL F LOW
SPL dB (A)
62
FULL F
LOW
58
AD DHE DEA
58
DEA
AD DHE
54
54
50
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
50
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 25 to 3000 PSI (210 Bar) (continued)
13
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
24 (18)
T PU
HO
RS
OW EP
ER
DEAD
HEAD
HOR
WE SEPO
1000 (70)
1500 (104)
2000 (140)
2500 (170)
EFFICIENCY
90% OVERALL
80%
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
66
SPL dB (A)
FUL
L FL
OW
62
DE AD
A HE
58
54
50
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
14
32 (24) 24 (18)
OUTPUT FLOW
16 (61)
OUTPUT FLOW
EP
OW
ER
12 (45) 8 (30) 4 (15) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (170) 3000 (210)
P IN UT P SE OW ER
HO
DEADH
EAD HO
RS
R EPOWE
DEADH
EAD HO
ER SEPOW
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
2 in3/rev (32cm3/rev)
VOLUM ETRIC
2 in3/rev (32cm3/rev)
VOLUMET RIC
EFFICIENCY
OVERALL 80%
EFFICIENCY
90%
70%
70%
60%
60%
50%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
in3/rev
(32cm3/rev)
in3/rev
(32cm3/rev)
66
66
SPL dB (A)
SPL dB (A)
FULL F
LOW
62
W ULL FLO
62
DEA DHE AD
58
HE EAD
AD
58
54
54
50
50
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 32 to 3000 PSI (210 Bar) (continued)
15
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
OUTPUT FLOW
32 (24)
E RS
W PO
ER
24 (18)
T PU IN
ER
1500 (104)
2000 (140)
2500 (170)
3000 (210)
in3/rev
(32cm3/rev)
VOLUMETRIC
EFFICIENCY
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
2 in3/rev (32cm3/rev)
66
SPL dB (A)
FUL
L FL
OW
62
AD DHE DEA
58
54
50
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
16
48 (32)
OUTPUT FLOW
OUTPUT FLOW
INP
H UT
OR
SE
W PO
ER
R HO
P SE
DEADH
RSEP AD HO
OWER
DEADHEA
0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
0 3500 (244)
0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
0 3500 (244)
EFFICIENCY
EFFICIENCY
90% OVERALL
90% OVERALL
80%
80%
70%
70%
60%
60%
50%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
2.75
in3/rev
(45cm3/rev)
76
76
SPL dB (A)
72
SPL dB (A)
72
FULL FLOW
68
68
FULL FLOW
64
DEADHEAD
DEADH
64
EAD
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 45 to 3000 PSI (210 Bar) (continued)
17
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
48 (32)
OUTPUT FLOW
HO
RS
DEAD
HEA
RSE D HO
POW
ER
0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
0 3500 (244)
EFFICIENCY
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
76
SPL dB (A)
72
FULL FLOW
68
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
18
72 (54)
30 (114) 24 (90) 18 (67) 12 (45) 6 (23) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
UT H S OR EP
60 (45)
OUTPUT FLOW
ER
OUTPUT FLOW
OW
RS
W PO
ER
INP
IN
DEADHE
AD
OWER HORSEP
DH DEADHEA
ORSEPOW
ER
12 (9) 0
1500 (104)
2000 (140)
2500 (174)
3000 (210)
3500 (244)
3.84in3/rev (63cm3/rev)
VOLUMETRIC
3.84in3/rev (63cm3/rev)
VOLUMETRIC
EFFICIENCY
EFFICIENCY
70%
70%
60%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
76
SPL dB (A)
72
FULL FLOW
DHE AD
68
DEA
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
VPV Vane Pump Performance Characteristics - VPV 63 to 3000 PSI (210 Bar) (continued)
19
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
OUTPUT FLOW
30 (114) 24 (90) 18 (67) 12 (45) 6 (23) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
I T HO R SE W ER
60 (45) 50 (37)
PO
U NP
DEADHE
AD HOR
SEPOW
ER
3.84in3/rev (63cm3/rev)
VOLUMETRIC
EFFICIENCY
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
76
SPL dB (A)
72
FULL FLOW
68
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
20
70 (52) 60 (45) 50 (37) 40 (30) 30 (22) 20 (15) 10 (7) 0 3000 (210) 3500 (244)
0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174)
4.90in3/rev
(80cm3/rev)
4.90in3/rev
(80cm3/rev)
VOLUMETRIC
VOLUMETRIC
EFFICIENCY
EFFICIENCY
70%
70%
60%
60%
50%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
76
76
SPL dB (A)
SPL dB (A)
72
72
68
FULL FLOW
68
FULL FLOW
64
64
DEADHEAD
DEADHEAD
60
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 80 to 3000 PSI (210 Bar) (continued)
21
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
4.90n3/rev (80cm3/rev)
VOLUMETRIC
EFFICIENCY
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
76
SPL dB (A)
72
68
FULL FLOW
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
22
50 (189) 40 (151) 30 (114) 20 (76) 10 (38) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
INP UT E RS PO WE R
100 (75)
OUTPUT FLOW
OUTPUT FLOW
OR
P SE
OW
ER
HO
DEAD
RSEPOWER DEADHEAD HO
1500 (104)
2000 (140)
2500 (174)
6.1in3/rev
(100cm3/rev)
VOLUMETRIC
6.1in3/rev
(100cm3/rev)
VOLUMETRIC
EFFICIENCY
EFFICIENCY
70%
70%
60%
60%
50%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
6.1
in3/rev
(100cm3/rev)
76
76
SPL dB (A)
SPL dB (A)
FULL F
LOW
72
FULL FLOW
72
68
68
DEADHEAD
64
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 100 to 3000 PSI (210 Bar) (continued)
23
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
PO SE OR
ER
60 (45) 40 (30)
EPOWER
HORS DEADHEAD
1500 (104)
2000 (140)
2500 (174)
6.1in3/rev (100cm3/rev)
VOLUMETRIC
EFFICIENCY
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
76
SPL dB (A)
FULL FLOW
72
68
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
24
60 (227) 45 (171) 30 (114) 15 (57) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
INP UT HO R
120 (90)
OUTPUT FLOW
OUTPUT FLOW
P SE
R WE
R HO
P SE
OW
ER
DEADHE
OWER AD HORSEP
DEA
RSEPOW DHEAD HO
ER
1500 (104)
2000 (140)
2500 (174)
7.93in3/rev (130cm3/rev)
VOLUMETRIC
7.93in3/rev (130cm3/rev)
VOLUMETRIC
EFFICIENCY
OVERALL 80%
EFFICIENCY
90%
70%
70%
60%
60%
50%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
7.93
in3/rev
(130cm3/rev)
76
76
SPL dB (A)
SPL dB (A)
72
FULL FLOW
FULL FLO
72
68
68 DEADHEAD
64
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 130 to 3000 PSI (210 Bar) (continued)
25
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
150 (112)
ER
T PU
15 (57)
DE
RSEPOW ADHEAD HO
ER
0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174)
7.93in3/rev (130cm3/rev)
VOLUMETRIC
EFFICIENCY
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
76
SPL dB (A)
FULL FLOW
72
68
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
26
75 (284) 60 (227) 45 (171) 30 (114) 15 (57) 0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174) 3000 (210)
INP UT H S OR EP OW ER
150 (112)
OUTPUT FLOW
OUTPUT FLOW
INP
UT
OR
P SE
OW
ER
DEAD
ER HEAD HORSEPOW
OWER AD HORSEP
0 0 500 (34) 1000 (70) 1500 (104) 2000 (140) 2500 (174)
10.0in3/rev
(164cm3/rev)
VOLUMETRIC
10.0in3/rev
(164cm3/rev)
VOLUMETRIC
EFFICIENCY
EFFICIENCY
90%
90%
OVERALL
OVERALL
80%
80%
70%
70%
60%
60%
50%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
10 in3/rev (164cm3/rev)
10
in3/rev
(164cm3/rev)
76
76
SPL dB (A)
SPL dB (A)
72
FULL FLOW
72
FULL F
LOW
68
68 DEADHEAD
64
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
Sound pressure levels measured in a hemi-anchoic chamber w/microphone placed 1 meter away at discrete locations. Sound pressure levels are spacially and time-weighted averaged.
VPV Vane Pump Performance Characteristics - VPV 164 to 3000 PSI (210 Bar) (continued)
27
Data plotted: with oil at 120F (49C) Viscosity at 120 = 140 SUS (29.6 cSt)
10.0in3/rev (164cm3/rev)
VOLUMETRIC
EFFICIENCY
70%
60%
50%
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
10 in3/rev (164cm3/rev)
FULL FLOW
76
SPL dB (A)
72
68
DEADHEAD
64
60
500 (34)
1000 (70)
1500 (104)
2000 (140)
2500 (170)
3000 (210)
, y y , | | y , y , y ,
28 VPV Vane Pump VPV 16, Single pump, S.A.E. A flange, RH rotation
7.00 (177.8) 6.09 (154.9) Optional combination capable pump with end cover
Inches (millimeters)
BOSCH
30 Involute Spline Data Flat root side fit Class 5 Pitch 16/32 Pressure angle 30 Number of teeth 9 Base Dia. 0.487193 in. ref. Form Dia. 0.504 in. ref. Major Dia. 0.625 +0.000 in. ref. -0.022
1.75 (44.5)
3.84 (97.5)
Pump centerline
OUT
IN
1.38 (35.0)
1.26 (32.0)
4.88 (123.9)
2.66 (67.5)
OUT
IN
1.67 (42.5)
0.31 (8.0)
1.65 (42.0)
8.06 (204.8)
DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light (Optional)
0.748 (19.0)
0.83 (21.1)
0.43 (11.1)
BOSCH BOSCH
Compensator adjusting knob (CW rotation increases pressure standard single stage compensator) Pump control mounting datum "T"
8.87 (225.4)
3.36 (85.0)
10.80 (274.4)
1.36 (34.5)
#6 S.A.E. Shock Clipper port. Should be plumbed to tank to activate shock clipper function (See page 97).
1.08 (27.5)
4.56 (115.8)
4.56 (115.8)
8.63 (219.3)
6.39 (162.3)
6.21 (157.8)
4.19 (106.4)
3.90 (99.0)
, y y , | y , y , y , | |
VPV Vane Pump 29 VPV 16 Single pump, Metric flange, RH rotation
Inches (millimeters)
Optional combination capable pump with end cover
BOSCH
Compensator adjusting knob (CW rotation increases pressure standard single stage compensator)
Pump centerline
3.84 (97.5)
4.65 (118.0)
0.94 (23.8)
6.50 (165.0)
1.38 (35.0)
BKS
4.88 (123.9)
4.59 (116.7)
OUT
4.65 (118.1)
conduit connector
2.66 (67.5)
IN
0.31 (8.0)
7.45 (189.2)
1.65 (42.0)
1.67 (42.5)
0.787 (20.0)
8.06 (204.8)
45
DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light (Optional) 0.236 Square key (6.0)
0.886 (22.5)
BOSCH
1.73 (44.0)
OUT
IN
BOSCH
8.87 (225.4)
3.36 (85.0)
4.21 (106.9)
5.00 (127.1)
10.80 (274.4)
1.36 (34.5)
#6 S.A.E. Shock Clipper port. Should be plumbed to tank to activate shock clipper function (See page 97).
7 6 5 4
1.08 (27.5)
4.56 (115.8)
6.05 (153.7)
Remote control port 1/4 19 BSPP Centerline pump control 3.06 (77.9)
4.56 (115.8)
8.63 (219.3)
6.39 (162.3)
7.94 (201.7)
4.055 (103.0)
6.21 (157.8)
Mounting flange
3.90 (99.0)
y , y |,
30 VPV Vane Pump VPV 25/32, Single pump, S.A.E. B flange, RH rotation
7.85 Optional combination capable pump with end cover (199.3) 6.94 (176.3)
Inches (millimeters)
BOSCH
4.46 (113.4)
OUT
IN
3.78 (96.0)
0.36 (9.25)
2.36 (59.7)
0.56 (14.2)
0.31 (7.8)
1.61 (41.0)
Optional 2-stage 1.57 compensator (40.0) 2-stage compensator adjusting knob (CW rotation increases pressure setting) Centerline pump control
1.36 (34.5)
4.88 (123.9)
3.53 (89.7)
7.06 (179.4)
7.05 30 Involute Spline Data (179.3) Flat root side fit . . .Class 5 3.35 Pitch . . . . . . . . . . . 16/32 (85.0) Pressure angle . . .30 Number of teeth. . . 13 Base dia. . . . . . . . 0.703645 in. ref.. Form dia . . . . . . . .0.749 in. ref. Rotation arrows cast into body +0.000 Major dia. . . . . . . .0.875 -0.022 in. ref
OUT
IN
5.75 (146.0)
0.87 (22.2)
0.98 (25.0)
SCALE: 2X
BOSCH
BOSCH
Pump centerline
9.90 (251.5)
4.65 (118.1)
5.44 (138.2)
11.82 (300.2)
#6 S.A.E. Shock clipper port. Should be plumbed to tank to activate shock clipper function (See page 97).
5.17 (131.4)
5.17 (131.4)
3.75 (95.5)
6.63 (168.6)
4.00 (101.6)
0.56 (14.4)
1.57 (40.0)
4.58 (116.4)
, y y , y , y ,
VPV 25/32, Single pump, Metric flange, RH rotation
Optional combination capable pump with end cover Pump centerline 0.98 (25.0) 0.31 (8.0) 1.1 (27.9) 3.84 (97.7) 140 bar Optional 2 pressure (vent) solenoid operated compensator
OUT IN
31
Inches (millimeters)
7.85 (199.3) 6.94 (176.3)
3.78 (96.0)
Pump centerline
0.94 (23.8)
1.36 (34.5)
Optional single-stage compensator with locking device Optional 2-stage compensator Centerline of pump control
BKS
2-stage compensator adjusting knob (CW rotation increases pressure setting) Optional 2 stage load compensator
4.88 (123.9)
5.24 (133.3)
OUT
conduit connector
0.41 (10.5)
8.20 (216.1)
6.63 (168.6) Rotation arrows cast into body 1.57 4.92 (40.0) (125.0) Mounting flange 3.936 (99.97)
IN
7.05 (179.1)
1.65 (42.0)
1.67 (42.5)
45
DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light (Optional) Manual override pushpin
3.53 (89.7)
7.16 (179.4)
BOSCH
BOSCH
X X
0.27 (7.0)
BOSCH
Optional volume control (CW rotation reduces flow) Outlet port 1-11 BSPP 5.26 (133.7) max.
9.90 (251.5)
4.46 (113.3)
11.82 (300.2)
7 6 5 4
1.08 (27.5)
#6 S.A.E. Shock Clipper port. Should be plumbed to tank to activate shock clipper function (See page 97). Optional 2 pressure operated solenoid compensator Remote control port 1/4 19 BSPP
1.83 (46.6)
5.24 (133.3)
3.35 (85.0)
4.58 (116.4)
9.06 (230.1)
0.43 (11.0)
32
Pump centerline
7.05 (179.1)
5.75 (146.0)
y , y , P |
VPV Vane Pump
Optional combination capable pump with end cover 7.85 (199.3) 6.94 (176.3)
BOSCH
Inches (millimeters)
OUT
IN
3.78 (96.0)
1.36 (34.5)
4.88 (123.9)
5.17 (131.4)
3.35 (85.0)
OUT
IN
4.00 (101.6)
0.56 (14.4)
BOSCH
BOSCH
Optional volume control (CW rotation reduces flow) Outlet port 1-11 BSPP
9.90 (251.5)
4.46 (113.3)
2.36 (59.7) 0.36 (9.25) 0.31 (7.8) #6 S.A.E. Shock Clipper port. Should 0.56 (14.2) be plumbed to tank to activate shock clipper 1.61 function (See page 97). (41.0)
11.82 (300.2)
1.57 (40.0)
1.08 (27.5)
30 Involute Spline Data Flat root side fit . . .Class 5 Pitch . . . . . . . . . . . 16/32 Pressure angle . . .30 Number of teeth. . . 13 Base dia. . . . . . . . 0.703645 in. ref.. Form dia . . . . . . . .0.749 in. ref. Major dia. . . . . . . .0.875+0.000 -0.022 in. ref
1.83 (46.6)
5.24 (133.3)
0.87 (22.2)
6.63 (168.6)
1.57 (40.0)
4.58 (116.4)
.098 (25.0)
y , | | | |
Pump centerline 3.80 (96.4) #6 SAE Shock clipper drain 13.55 (344.2) 4.46 (113.3) 5.26 (133.7) max.
OUT
|
4.65 (118.1) 3.78 (96.0)
IN
33
BOSCH
8.38 (212.9)
7.05 (179.3)
OUT
IN
4.65 (118.1)
5.75 (146.0)
4.00 (101.6)
0.56 (14.4)
BOSCH
8.50 (216.1)
2.05 (52.0)
8.24 (209.2)
0.36 (9.25)
5.96 (151.4)
0.36 (9.25)
0.31 (14.2)
Sentinel light
3.50 (88.7)
1.57 (40.0)
(Optional) DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light
1/2" conduit connector w/ A.C. coil only D.C. coil leads w/o conduit connector
5.17 (131.4)
4.59 (116.7)
3.78 (95.9)
8.39 (213.2)
0.87 (22.2)
1.57 (40.0)
.098 (25.0)
4.58 (116.4)
34
6.60 (167.6)
0.47 (12.0)
#6 S.A.E. Shock Clipper port. Should be plumbed to tank to activate shock clipper function (See page 97).
8.38 (212.9)
5.11 (129.7)
BOSCH
OUT
5.17 (131.4)
5.17 (131.4)
IN
Pilot valve
3.48 (88.5)
3.68 (93.7)
3.75 (95.3)
8.29 (210.7)
5.75 (146.0)
4.00 (101.6)
1.57 (40.0)
0.56 (14.4)
4.58 (116.4)
SCALE: 2X
B T A
B T A
z y , y , | y ,
Inches (millimeters)
Pump centerline Optional 2 stage compensator w/ NG6 pressure select valve & wiring box Pump centerline
OUT
3.78 (96.0)
IN
BOSCH
4.65 (118.1)
8.25 (209.5)
10.16 (258.1)
16.00 (406.5)
11.05 (280.6)
0.96 (24.3)
VPV Vane Pump VPV 45/63/80, Single pump, S.A.E. C flange, RH rotation
9.72 (247.0) Optional 2 pressure solenoid operated (and vent) compensator 8.74 (222.0) 4.37 (111.0) 8.00 (203.1) 4.00 (101.5)
35
Inches (millimeters)
7.48 (190.0)
7.30 (185.5)
9.74 (247.4)
OUT
1.69 (42.9)
D
IN
4.94 (125.4)
3.89 (98.9)
0.76 (19.2) Rotation arrows cast into body Std. SAE 2" pad suction 2.00 dia. (50.8) 3.06 (77.8) 1.53 (38.9)
0.84 (21.4)
2.04 (51.7)
, y z z y , | | z, z y z, z y
3.82 (97.0) 4.24 (107.8 ) Optional 2 pressure solenoid operated vent compensator
DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light (Optional)
SCALE: 2X
1.67 (42.5)
3.89 (99.0)
2.66 (67.7)
1.91 (48.6)
0.69 (17.6)
2 stage compensator Remote control port 7/16 20 UNF, 0.45 deep SAE "C" mounting flange
7.30 (185.5)
1.39 (35.2)
7.13 (181.0)
5.00 (127.0)
1.25 (31.7)
9.31 (236.5)
36
VPV Vane Pump VPV 45/63/80, Single pump, Metric flange, RH Rotation
37
9.72 (247.0)
Inches (millimeters)
7.48 (190.0)
Optional eye bolt Centerline pump control 4.37 (111.0) 8.00 (203.1) 4.00 (101.5) M12 x 1.75 - 6H TH'D 4 holes
8.74 (222.0)
7.30 (185.5)
9.74 (247.4)
OUT
1.69 (42.9)
D
IN
4.94 (125.4)
Case drain 3.89 (98.9) 3/8 -19 BSPP 0.76 (19.2) 0.84 (21.4) 1.53 (38.9) 3.06 (77.8) 2.04 (51.7)
z z y , y , z z y , |, | z z y
SCALE: 2X
SINGLE STAGE CONTROL NOT AVAILABLE ON VPV 45-164 Optional 2 pressure solenoid operated compensator 3.89 (99.0) 4.70 (119.4) 2.78 (70.8) 3.82 (97.0) Optional 2 pressure solenoid operated vent compensator Compensator adjusting knob (CW rotation increases pressure setting) 1.91 (48.6) Manual override pushpin Optional 2 stage with load compensator 1/4 - 19 BSPP 7.26 (184.4) 45 2.66 (67.7) 4.45 (113.1) 0.39 X 0.31 rectangular key (10.0 X 8.0) 1.37 (34.9) 1.26 (32.0) 6.30 (160.0) 6.61 (168.0) 9.31 (236.5) 7.44 (189.0)
4.24 (107.8 )
1.65 (42.0)
1.67 (42.5) (Optional) DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light
2 stage compensator Remote control port 1/4 - 19 BSPP, 0.48 deep Mounting flange
4.92 (124.8)
0.55 (14.0)
38
Optional combination capable pump with end cover (P1 Version) 10.55 (267.9)
9.64 (244.9)
yy ,,
BOSCH
1.16 (29.4)
4.72 (120.0)
0.41 (10.5) 0.36 (9.2) 2.70 (68.5) Std. SAE 1-1/4" pad pressure 1.25 dia. (31.8) M12 x 1.75 - -6H TH'D 4 holes
3.76 (95.7)
2.95 (75.0)
8.13 (206.7)
BOSCH
2.31 (58.7)
|
Pump centerline
OUT
IN
BOSCH
Pump centerline
y ,
6.89 (174.9) max. 5.96 (151.4) 13.95 (354.5)
VPV Vane Pump VPV 100/130/164, Single pump, S.A.E. D flange, RH rotation
39
Inches (millimeters)
12.11 (307.6) Centerline of pump control 6.06 (153.8) 9.36 (237.8) 4.39 (111.6)
OUT
4.72 (120.0)
0.95 (24.0)
IN
9.00 (229.0)
z z y , z z y , z, z y y ,
3.50 (88.9) 3.89 (99.0) 4.70 (119.4) 2.78 (70.8) 1/2" conduit connector (Optional) DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light Std SAE 2-1/2" pad suction 2.47 (62.7) DIA 1.65 (42.0) 1.67 (42.5) Optional 2 stage with load compensator Load sense port #4 S.A.E. 1.91 (48.6) Manual override pushpin Remote control port 7/16 20 UNF, 0.45 deep 8.62 (219.1) 2 stage compensator 2.66 (67.7) SAE "D" mounting flange 3.82 (97.0) Optional 2 pressure solenoid operated vent compensator 1.94 (49.3) 6.00 (152.4) 1.75 (44.4) 8.41 (213.7) 0.81 (20.7) typ.
SCALE: 2X
12.80 (325.0)
40
|
VPV 100/130/164, Single pump, S.A.E. D flange, RH rotation (continued)
12.00 (304.8) Optional combination capable pump with end cover (P1 Version) 12.90 (327.8) 6.20 (157.4) Optional volume control (CW rotation reduces flow) 1.82 (46.3) 1.41 (35.9) 0.70 (17.9) Std S.A.E. 1-1/2" pad pressure 1.46 dia. (37.1) Pump centerline 1.37 (34.9) 6.09 (154.7) 0.32 (8.1) 0.49 (12.4) Pump control mounting datum "T" 2.96 (75.1) 1/2 13 UNC, 28 deep, 4 holes 3.76 (95.7) 9.24 (234.7) Lift point M10 x 1.5 - 6H x 11.0 deep th'd 9.82 (249.4)
BOSCH
Inches (millimeters)
2.75 (69.9)
| |
BOSCH
Pump centerline
OUT
IN
BOSCH
13.95 (354.5)
17.00 (432.0)
4.15 (105.5)
VPV Vane Pump VPV 100/130/164, Single pump, Metric flange, RH rotation
41
Inches (millimeters)
12.11 (307.6) Centerline of pump control 6.06 (153.8) 8.67 (220.2) Case drain port 3/8 -19 BSPP 9.36 (237.8) 4.39 (111.6)
IN
5.77 (146.6)
OUT
11.53 (292.9)
4.72 (120.0)
0.95 (24.0)
2.00 (50.8) 1.00 2.25 (25.4) (57.0) Suction 2.47 (62.7) DIA
5.56 (141.4)
z z y , z z y , z, z y y ,
Optional 2 pressure solenoid operated compensator 3.89 (99.0) 4.70 (119.4) 2.78 (70.8) 4.24 (107.8 ) 3.50 (88.9) 1/2" conduit connector (Optional) DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light 1.65 (42.0) 1.67 (42.5) 1/4 - 19 BSPP 1.91 (48.6) Manual override pushpin Optional 2 stage with load compensator Remote control port 1/4 - 19 BSPP, 0.48 deep 2 stage compensator 2.66 (67.7) 8.62 (219.1) Mounting flange 0.70 (18.0) 3.82 (97.0) 45 Optional 2 pressure solenoid operated vent compensator 1.85 (46.9) 6.30 (160.0) 1.57 (40.0) 7.87 (200.0) 8.41 (213.7) 5.56 (141.4) 12.80 (325.0) 0.47 (12.0) square key
SCALE: 2X
42
|
VPV 100/130/164, Single pump, Metric flange, RH rotation (continued)
12.00 (304.8) Optional combination capable pump with end cover (P1 Version) 12.90 (327.8) 6.20 (157.4) Optional volume control (CW rotation reduces flow) 1.86 (47.3) 1.41 (35.9) 0.70 (17.9) Std S.A.E. 1-1/2" pad pressure 1.46 dia. (37.1) Pump centerline 1.37 (34.9) 6.09 (154.7) 0.36 (9.2) 0.40 (10.1) M12 x 1.75, 28 deep, 4 holes Pump control mounting datum "T" 3.76 (95.7) 3.62 (92.1) Lift point M10 x 1.5 - 6H x 11.0 deep th'd 9.24 (234.7) 9.82 (249.4)
BOSCH
Inches (millimeters)
2.75 (69.9)
| |
BOSCH
Pump centerline
OUT
IN
BOSCH
7.65 (194.2)
17.00 (432.0)
4.15 (105.5)
| y z, |
VPV 16, Combination pump, S.A.E. A flange, RH rotation
VIEW A-A
2.61 (66.4) 0.4 (10.2)
OUT
43
Inches (millimeters)
3.33 (84.6)
2.61 (66.4)
0.4 (10.2)
Support (Lift) point 3/8"-16UNC-2B X 22.0mm deep Outlet port, #12 S.A.E.
4.11 (104.5)
OUT
IN
9.43 (239.4)
11.24 (285.4)
OUT
IN
1.38 (35.0)
BOSCH
6.96 (176.8)
10.70 (271.9)
2.66 (67.5)
3.19 (81.0)
0.31 (8.0)
0.43 (11.1)
BOSCH
IN
3.33 (84.6)
8.79 (223.3)
4.18 (106.2)
10.80 (274.4)
4.95 (125.8)
1.36 (34.5)
#6 S.A.E. Shock clipper port. Should be plumbed to tank to activate shock clipper function (See page 97).
Optional 2-stage compensator (now in modular design) Support (Lift) point 3/8"-16UNC-2B X 22.0mm deep Inlet port, #16 S.A.E. Case drain port, #8 S.A.E.
1.08 (27.5)
14.07 (357.5) Remote 9.43 control #4 S.A.E. (239.4) 12.61 12.61 (320.2) (320.2) 6.96 11.22 (176.8) (285.0)
11.94 (303.4)
4.56 (115.8)
3.90 (99.0)
3.19 (81.0)
1.75 (44.5)
4.19 (106.4)
| y |, z
44 VPV Vane Pump VPV 25/32, Combination pump, S.A.E. B flange, RH rotation
VIEW A-A
0.4 (10.1) Standard single stage compensator Compensator adjusting knob (CW rotation increases pressure setting) 4.13 3.41 (105.0) (86.7) 9.90 (251.5)
OUT IN
Inches (millimeters)
0.4 (10.1)
Optional volume control (CW rotation reduces flow) 5.26 (133.7) max.
Support (Lift) point 3/8" - 16UNC-2B X 22.0mm deep 4.90 Outlet port, (124.3) #16 S.A.E.
3.53 (89.7)
7.06 (179.4)
OUT
IN
11.07 (281.2)
13.35 (339.2)
OUT
IN
BOSCH
A 8.12 (206.3)
12.6 (326.2)
3.85 (98.0)
3.35 (85.0)
4.00 (101.6)
0.56 (14.4)
BOSCH
4.65 (118.0)
5.44 (138.2)
1.36 (34.5)
11.73 (297.9)
#6 S.A.E. Shock clipper port. Should be plumbed to tank to activate shock clipper function (See page 97). Inlet port, #24 S.A.E Case drain port, #8 S.A.E
1.08 (27.5)
16.55 (420.5)
14.74 (374.5)
14.08 (357.7)
13.35 (339.2)
5.24 (133.3)
3.86 (98.0)
2.35 (59.7)
4.58 (116.5)
0.98 (25.0)
5.75 (146.0)
0.87 (22.2)
z | | y , | z
VPV Vane Pump 45 VPV 32/16, Combination pump, S.A.E. B flange, RH rotation
Inches (millimeters)
VIEW B-B VIEW A-A
3.33 (84.6) Standard single stage compensator 8.79 (223.3) 9.90 (251.5) 2.61 (66.4) 0.4 (10.2) 0.47 (12.0) thru, support holes Optional vertical supports for combination pumps when rotated 90 Optional volume control (CW rotation reduces flow) #6 S.A.E. Shock clipper port. Should be plumbed to tank to activate shock clipper function (See page 97). 4.65 (118.0) 8.14 (206.8) 2-stage compensator adjusting knob (CW rotation increases pressure rating) Support (Lift) point 3/8"-16UNC-2B X 22.0mm deep 4.11 4.81 Outlet port, (104.5) (122.3) #12 S.A.E. max 5.61 (142.5)
OUT
10.27 (260.9)
OUT
IN
BOSCH
7.81 (198.3)
IN
3.86 (98.0)
3.35 (85.0)
6.63 (168.6)
.56 (14.4)
BOSCH BOSCH
OUT
OUT
IN
IN
4.18 (106.2)
10.62 (269.7)
4.65 (118.1)
11.44 (290.7)
4.95 (125.8)
5.44 (138.2)
1.36 (34.5)
1.36 (34.5) #6 S.A.E. Shock clipper port. Should be plumbed to tank to activate shock clipper function (See page 97).
1.08 (27.5)
2.80 (71.3)
1.08 (27.5) Support (Lift) point 3/8"-16UNC-2B X 22.0mm deep Inlet port, #16 S.A.E. Case drain port, #8 S.A.E. 5.53 (140.5)
14.92 (379.0)
13.37 (339.7) A
12.79 (324.9)
10.27 (260.9)
12.06 (306.4)
7.81 (198.3)
5.24 (133.3)
3.86 (98.0)
4.58 (116.4)
2.35 (59.7)
6.63 (168.6)
1.57 (40.0)
z | z
46 VPV Vane Pump VPV 32/25, Combination pump, S.A.E. to F gear, RH rotation
VIEW A-A
0.4 (10.2) Pump centerline 3.33 (84.6) 3.78 (96.0) 2.61 (66.4) 12.0 thru support holes 0.4 (10.2) Optional vertical supports for combination pumps when rotated 90 Pump control mounting datum T Optional volume control (CW rotation reduces ow) Optional 2-stage compensator (now in modular design) Support (Lift) point 3/8-16UNC-2B X 15 deep S.A.E. F gear pump Centerline pump control Outlet port inlet port-opposite side 0.618 (15.7) 5.26 (133.7) max B
xxx xxx xxx
Inches (millimeters)
9.90 (251.5) 4.65 (118.1) 5.44 (138.2) 1.36 (34.5) #6 S.A.E. Shock clipper port. Should be plumbed to tank to activate shock clipper function (See page 97). 1.08 (27.54) Support (Lift) point 3/8-16UNC-2B X 15 deep 1.65 (41.9)
11.82 (300.2)
4.88 (123.9)
OUT
IN
4.46 (113.3)
BOSCH
7.81 (198.3)
7.81 (198.3)
3.35 (85.0)
5.24 (133.3)
3.75 (95.5)
2.35 (59.7)
5.75 (146.0)
.56 (14.4)
Gear Pump Theoretical Displacement in3/rev (cc/rev) 0.24 (4) 0.34 (5.5) 0.49 (8) 0.67 (11) 0.85 (14) 0.98 (16) 1.16 (19) 1.37 (22.5)
in (mm) 1.571 (39.9) 1.618 (41.1) 1.697 (43.2) 1.850 (47.0) 1.870 (47.5) 1.870 (47.5) 1.870 (47.5) 2.169 (55.1)
Total Weight (Vane Pump + Gear Pump) in in in INLET OUTLET lbs. (mm) (mm) (mm) (Kg) 3.346 10.46 12.24 70.0 (85.0) (265.7) (311.0) 9/16-18 UNF 9/16-18 UNF (31.7) 3.445 10.51 12.34 70.2 (87.5) (267.0) (313.5) 9/16-18 UNF 9/16-18 UNF (31.8) 3.606 10.59 12.50 70.4 7/8-14 UNF 7/8-14 UNF (91.6) (269.0) (317.5) (31.9) 3.803 10.74 12.70 70.6 (96.6) (272.8) (322.5) 1-1/16-12 UNF 7/8-14 UNF (32.0) 4.0 10.76 12.90 70.8 (101.6) (273.3) (327.7) 1-1/16-12 UNF 7/8-14 UNF (32.1) 4.134 10.76 13.03 70.9 (105.0) (273.3) (331.0) 1-1/16-12 UNF 7/8-14 UNF (32.2) 4.330 10.76 13.23 71.1 (110.0) (273.3) (336.0) 1-1/16-12 UNF 7/8-14 UNF (32.3) 4.543 11.06 13.44 71.4 (115.4) (281.0) (341.4) 1-1/16-12 UNF 7/8-14 UNF (32.4) D Port Size
Dimension B C
, y y , z, y , y
VPV 45/63/80 to VPV 16, S.A.E. & Metric Combination
A
2.81 (71.3)
(SH.2 @ K-3)
y ,
7.44 (189.0)
OUT IN
47
(SH.2 @ D-6)
Support point SAE 3/8"-16UNC-2B THD X .59 deep METRIC M10 X 1.5-6H THD (15.0)
Inches (millimeters)
18.27 (464.1)
16.80 (426.8)
14.90 (378.5)
1.69 (42.88)
OUT
IN
4.94 (125.4)
3.89 (98.9)
4.37 (111.0)
4.37 (111.0)
Case drain port .76 METRIC 3/8-19 BSPP (19.2) SAE #8 S.A.E. Inlet port std. SAE 2 pad 2.00 (50.8)
10.12 (257.2)
3.06 (77.78)
1.53 (38.89)
4.00 (101.5)
SAE/METRIC
SAE/METRIC
1.39 (35.23)
SAE 1/2"-13UNC-2B THD X 1.14 deep typ METRIC M12 X 1.75-6H THD (29.0) 4 holes 1.45 (36.9)
1.25 (31.74)
Single stage compensator SAE C 2-bolt mounting flange per ISO 3019/1
1.26 (32.0)
2.08 (52.8)
2.08 (52.8)
5.91 (150.0)
5.91 (150.0)
13.03 (330.8)
13.03 (330.8)
45 typ
7.13 (181.0)
5.96 (151.4)
5.96 (151.4)
.69 (17.6)
9.31 (236.5)
7.44 (189.0)
6.61 (168.0)
9.31 (236.5)
DETAIL SAE-SAE
DETAIL METRIC-METRIC
48
Suport point SAE" 3/8" - 16 UNC - 2B THD X .59 deep (15.0) METRIC M10 X 1.5-6H THD X .59 deep (15.0) Suport (Lift) point SAE & METRIC M10 X 1.5 - 6H THD X ..44 deep (11.2)
y ,
2.04 (51.7) 2.31 (58.72)
OUT
13.62 (346.0)
5.00 (126.98)
10.50 (266.8)
.31 (8.0)
2.20 (56.0)
SAE 7/16-14UNC-2B THD X 1.14 deep typ METRIC M12 X 1.75-6H THD (29.0) 4 holes
.94 (23.8)
2 1 0 9
1.35 (34.4)
2.95 (75.0)
BKS
6.50 (165.1)
BOSCH BOSCH
IN
3.84 (97.6)
BOSCH
5.36 (136.2)
.49 (12.45)
Detail SAE1
4.92 (124.97) .36 (9.25) 2.70 (68.5)
1.16 (29.36)
VIEW
B-B
y ,
(SH.1 @ H-2)
.41 (10.5)
Detail METRIC1
4.21 (106.9)
8.87 (225.4)
5.00 (127.1)
VIEW
A-A
(SH.1 @ N-4)
49
Inches (millimeters)
VIEW A A
4.88 (123.9) 1.08 (27.5) #6 S.A.E. Shock Clipper port. Should be plumbed to tank to activate shock clipper function (See page 97). 4.21 (106.9) 6.93 (176.0) 6.23 (158.4) Optional 2-stage compensator Remote control
15.31 (389.0)
4.94 (125.5)
Inlet
y , y , z, y , y
50 VPV Vane Pump VPV 45/63/80 to VPV 25/32, S.A.E. & Metric Combination
A A
8.14 (206.8) 3.53 (89.7)
(SH.2 D-6)
Inches (millimeters)
Support point SAE 3/8"-16UNC-2B THD X .87 deep METRIC M10 X 1.5-6H THD (22.0)
(SH.2 K-6)
Case drain port SAE #8 S.A.E. METRIC 3/8-19 BSPP Inlet port SAE #24 S.A.E. METRIC 1 1/2-11 BSPP
17.43 (442.6)
OUT
IN
19.90 (505.4)
18.01 (457.5)
14.41 (366.1)
16.19 (411.1)
10.82 (274.9)
1.69 (42.88)
OUT
IN
4.94 (125.4)
3.89 (98.9)
4.37 (111.0)
4.37 (111.0)
.76 (19.2)
1.53 (38.89)
10.12 (257.2)
3.06 (77.78)
SAE/METRIC
SAE/METRIC
4.00 (101.5)
1.39 (35.23)
SAE 1/2"-13UNC-2B THD X 1.14 deep typ METRIC M12 X 1.75-6H THD (29.0) 4 holes 1.37 (34.91)
1.25 (31.74)
1.26 (32.0)
2.08 (52.8)
2.08 (52.8)
5.91 (150.0)
5.91 (150.0)
13.03 (330.8)
13.03 (330.8)
45 typ
7.13 (181.0)
5.96 (151.4)
5.96 (151.4)
0.55 (14.0)
6.30 (160.0)
.69 (17.6)
9.31 (236.5)
7.44 (189.0)
6.61 (168.0)
9.31 (236.5)
DETAIL SAE-SAE
DETAIL METRIC-METRIC
51
Inches (millimeters)
5.26 (133.7) max. Outlet port SAE #16 S.A.E. METRIC 1-11 BSPP Support point SAE 3/8"-16UNC-2B THD X .87 deep METRIC M10 X 1.5-6H THD (22.0) Suport (Lift) point SAE & METRIC M10 X 1.5-6H THD X .44 deep (11.2) Optional volume control (CW rotation reduces flow) 5.00 (126.98) Outlet port Std. SAE 1-1/4" pad 1.25 (31.8)
BOSCH
.31 (8.0)
2.20 (56.0)
Detail SAE1
5.36 (136.2)
.49 (12.45)
4.92 (124.97)
.36 (9.25)
2.70 (68.5)
2.04 (51.7)
2.31 (58.72)
Detail METRIC1
SAE 7/16-14UNC-2B THD X 1.14 deep typ METRIC M12 X 1.75-6H THD (29.0) 4 holes VIEW B-B
(SH.1 @ H-2)
9.90 (251.5)
OUT OUT IN IN
.94 (23.8)
1.35 (34.4)
BKS
6.50 (165.1) Optional VPV25/32 single stage compensator with locking device
BOSCH BOSCH
2 1 0 9 8
10 8 6 11 9 7
VIEW
A-A
(SH.1 @ N-4)
52
VIEW A A
4.88 (123.9) 1.08 (27.5) #6 S.A.E. Shock Clipper port. Should be plumbed to tank to activate shock clipper function (See page 97). 4.65 (118.1) 7.33 (186.2) 6.63 (168.6) Optional 2-stage compensator
Remote control
Inlet
2-stage compensator
4.94 (125.5)
Inlet
, y z z z, z y z, z y
VPV 45/63/80 to an F Gear pump, S.A.E. & Metric Combination
A A
(SH.2 D-6)
53
Inches (millimeters)
Compensator adjusting knob (CW rotation increases pressure setting) 0.4 (10.2) 3.33 (84.6)
8.00 (203.1)
7.30 (185.5)
(SH.2 K-6)
Support point "SAE" 3/8"-16UNC-2B TH'D X .59 deep "METRIC" M10 X 1.5 TH'D (15.0) 1.65 (41.9)
2.61 (66.4)
1.65 (41.9)
10.50 (266.7)
1.69 (42.88)
OUT
IN
4.94 (125.4)
3.89 (98.9)
4.37 (111.0)
.76 (19.2)
5.76 (146.2)
8.74 (222.0)
10.13 (257.2)
3.06 (77.78)
1.53 (38.89)
4.00 (101.5)
SAE/METRIC
SAE/METRIC
"SAE" 1/2"-13UNC-2B TH'D X 1.14 deep typ "METRIC" M12 X 1.75-6H TH'D (29.0) 4 holes
Remote control port 1/4 19 BSPP, 0.48/(12.2) deep Standard 2 stage compensator 1.91 (48.6)
1.25 (31.74)
1.26 (32.0)
2.08 (52.8)
1.39 (35.23)
2.08 (52.8)
1.37 (34.9)
5.91 (150.0)
5.91 (150.0)
13.03 (330.9)
13.03 (330.8)
45 typ
7.13 (181.0)
5.96 (151.4)
5.96 (151.4)
6.30 (160.0)
.69 (17.6)
9.31 (236.5)
6.61 (168.0)
9.31 (236.5)
DETAIL SAE-SAE
7.44 (189.0)
DETAIL METRIC-METRIC
54
Support (Lift) point "SAE & METRIC" M10 X 1.5-6H TH'D X 0.44 deep (11.2) 0.41 (10.5)
"SAE" 7/16-14UNC-2B TH'D X 1.14 deep typ "METRIC" M12 X 1.75-6H TH'D (29.0) 4 holes VIEW B-B
(SH.1 @ H-2)
Pump centerline
VIEW A-A
(SH.1 @ N-4)
y ,
2.95 (75.0) 3.73 (94.7)
BOSCH
2.70 (68.5)
0.36 (9.25)
4.92 (124.97)
METRIC1
1.19 0.59 (30.18) (15.09) 1.16 (29.36) 2.20 (56.0) 0.31 (8.0) 5.00 (126.98)
DETAIL
SAE1
Gear pump Theoretical Displacement in3/rev (cc/rev) 0.24 (4) 0.34 (5.5) 0.49 (8) 0.67 (11) 0.85 (14) 0.98 (16) 1.16 (19) 1.37 (22.5)
Dimension A in. (mm) 1.571 (39.9) 1.618 (41.1) 1.697 (43.2) 1.850 (47.0) 1.870 (47.5) 1.870 (47.6) 1.870 (47.5) 2.169 (55.1) B in. (mm) 3.346 (85.0) 3.445 (87.5) 3.606 (91.6) 3.803 (96.6) 4.0 (101.6) 4.134 (105.0) 4.330 (110.0) 4.543 (115.4) C in. (mm) 13.30 (337.8) 13.35 (339.1) 13.43 (341.1) 13.58 (344.9) 13.60 (345.4) 13.6 (345.6) 13.6 (345.5) 13.90 (353.12) D in. (mm) 15.08 (383.2) 15.19 (385.7) 15.34 (389.7) 15.49 (393.4) 15.69 (398.5) 15.86 (403.0) 16.06 (408.0) 16.27 (413.4) E in. (mm) 13.56 (344.6) 13.62 (345.9) 13.70 (347.9) 13.85 (351.7) 13.87 (352.2) 13.87 (352.4) 13.86 (352.3) 14.17 (359.9) F in. (mm) 15.35 (390.0) 15.45 (392.5) 15.61 (396.5) 15.76 (400.2) 15.96 (405.3) 16.13 (409.8) 16.33 (414.8) 16.54 (420.2)
Gear Pump Port Sizes Inlet 9/16-18 UNF 9/16-18 UNF 7/8-14 UNF 1-1/16-12 UN 1-1/16-12 UN 1-1/16-12 UN 1-1/16-12 UN 1-1/16-12 UN Outlet 9/16-18 UNF 9/16-18 UNF 7/8-14 UNF 7/8-14 UNF 7/8-14 UNF 7/8-14 UNF 7/8-14 UNF 7/8-14 UNF
Total Weight (Vane Pump & Gear Pump) lbs. (Kg) 135 (61.2) 135.2 (61.3) 135.4 (61.4) 135.6 (61.5) 135.8 (61.6) 135.9 (61.6) 136.1 (61.7) 136.4 (61.9)
, y z
Outlet port / Inlet port opposiete sides 2.61 (66.4) B 0.4 (10.2) 3.33 (84.6) Compensator adjusting knob (CW rotation increases pressure setting) A
OUT
55
Inches (millimeters)
G E
4.37 (111.0)
5.76 (146.2)
8.74 (222.0)
10.13 (257.2)
METRIC
IN
4.94 (125.4)
METRIC
2.08 (52.8)
1.26 (32.0)
5.91 (150.0)
13.03 (330.8)
45 typ
5.96 (151.4)
6.30 (160.0)
9.31 (236.5)
, y z z z, z y
56 VPV Vane Pump VPV 45/63/80 to an G Gear pump, S.A.E. & Metric Combination
A
2.062 (52.3) Outlet: 1.875 (47.6) 1.031 Inlet: (26.2) 4.19 (106.4) 0.875 Outlet: (22.2) Inlet:
Inches (millimeters)
(SH.2 D-6)
8.00 (203.1)
7.30 (185.5)
(SH.2 K-6)
10.50 (266.7)
1.69 (42.88)
OUT
IN
4.94 (125.4)
3.89 (98.9)
4.37 (111.0)
.76 (19.2)
5.76 (146.2)
8.74 (222.0)
10.13 (257.2)
3.06 (77.78)
1.53 (38.89)
4.00 (101.5)
SAE/METRIC
SAE/METRIC
"SAE" 1/2"-13UNC-2B TH'D X 1.14 deep typ "METRIC" M12 X 1.75-6H TH'D (29.0) 4 holes
1.25 (31.74)
1.26 (32.0)
2.08 (52.8)
1.39 (35.23)
5.91 (150.0)
5.91 (150.0)
13.03 (330.9)
13.03 (330.8)
45 typ
7.13 (181.0)
5.96 (151.4)
5.96 (151.4)
6.30 (160.0)
.69 (17.6)
9.31 (236.5)
6.61 (168.0)
9.31 (236.5)
DETAIL SAE-SAE
7.44 (189.0)
DETAIL METRIC-METRIC
Support point "SAE" 3/8"-16UNC-2B TH'D X .87 deep "METRIC" M10 X 1.5 6H TH'D (22.0)
4.31 (110.0)
57
Inches (millimeters)
Pressure outlet port std. S.A.E. 1-1/4" pad 1.25 (31.8) Optional volume control (CW rotation reduces flow)
BOSCH
Support (Lift) point "SAE & METRIC" M10 X 1.5-6H TH'D X 0.44 deep (11.2) 0.41 (10.5)
2.70 (68.5)
0.36 (9.25)
4.92 (124.97)
METRIC1
0.31 (8.0)
5.00 (126.98)
DETAIL "SAE" 7/16-14UNC-2B TH'D X 1.14 deep typ "METRIC" M12 X 1.75-6H TH'D (29.0) 4 holes
SAE1
Pump centerline
VIEW A-A
(SH.1 @ N-4)
y ,
2.95 (75.0) 5.88 (149.7)
Gear pump Theoretical Displacement in3/rev (cc/rev) 1.37 (22.5) 1.71 (28) 1.95 (32) 2.32 (38) 2.75 (45) 3.42 (56)
Dimension A in. (mm) 2.40 (61.0) 2.48 (63.0) 2.54 (64.5) 2.62 (66.5) 2.74 (69.5) 2.95 (75.2) B in. (mm) 5.07 (128.5) 5.26 (133.7) 5.40 (137.2) 5.62 (142.6) 5.87 (149.2) 6.31 (160.2) C in. (mm) 14.6 (370.8) 14.68 (372.8) 14.74 (374.4) 14.82 (376.4) 14.94 (379.4) 15.15 (384.8) D in. (mm) 17.26 (438.6) 17.45 (443.2) 17.59 (446.8) 17.81 (452.3) 18.06 (458.7) 18.5 (469.9)
Gear Pump Port Sizes Inlet 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt Outlet 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt
Total Weight (Vane Pump & Gear Pump) lbs. (Kg) 271.4 (123.1) 271.8 (123.3) 272.3 (123.5) 272.6 (123.6) 273.1 (123.9) 274.1 (124.3)
| z y , y , z, z y
58 VPV Vane Pump VPV 45/63/80 to VPV 45/63/80, S.A.E. & Metric Combination
A A
Optional 2 stage compensator
(SH.2 D-6)
Inches (millimeters)
5.22 (132.6)
8.00 (203.1)
7.30 (185.5)
(SH.2 K-6)
Case drain port "METRIC" 3/8-19 BSPP typ "SAE" #8 S.A.E. typ
17.33 (440.3)
23.18 (588.8)
15.48 (393.1)
18.38 (466.8)
11.12 (282.4)
OUT
4.94 (125.4)
3.89 (98.9)
IN
0.76 (19.2)
0.84 (21.44)typ
4.37 (111.0)
10.13 (257.2)
SAE/METRIC
SAE/METRIC
"SAE" 1/2"-13UNC-2B TH'D X 1.14 deep typ "METRIC" M12 x 1.75-6H TH'D (29.0) 4 holes
1.91 (48.6)
2.08 (52.8)
1.26 (32.0)
2.08 (52.8)
5.91 (150.0)
1.37 (34.9)
5.91 (150.0)
45 typ
7.13 (181.0)
13.03 (330.8)
5.96 (151.4)
1.25 (31.74)
5.96 (151.4)
6.30 (160.0)
0.69 (17.6)
9.31 (236.5)
DETAIL SAE-SAE
1.39 (35.23)
7.44 (189.0)
6.61 (168.0)
DETAIL METRIC-METRIC
Support (Lift) point "SAE" 5/8"-11UNC-2B TH'D X 1.30 deep "METRIC" M16 X 2-6H TH'D (33.0) 13.03 (330.8)
OUT
IN
T T
"SAE" 7/16"-14UNC-2B TH'D 1.14 "METRIC" M12 X 1.75-6H TH'D X(29.0) deep typ 4 holes 1.16 (29.36) 1.19 .59 (30.18) (15.09) .31 (8.0) 2.20 (56.0) 5.36 (136.2)
z, y
VPV Vane Pump 59
Inches (millimeters)
5.88 (149.4) 2.95 (75.0)
BOSCH
OUT IN
(SH.1 @ P-2
View A-A )
2.31 (58.72)
2.04 (51.7)
5.00 (126.98)
.49 (12.45)
Detail SAE1
11.12 (282.4)
BOSCH
Outlet port Std. S.A.E. 1-1/4" pad 1.25 typ (31.8) Optional volume control (CW rotation reduces flow)
18.80 (477.6)
.41 (10.5)
Detail METRIC1
Support (Lift) point "SAE & METRIC" M10 X 1.5-6H TH'D X .44 deep typ (11.2)
Support point "SAE" 5/8"-11 UNC-2b TH'D X 1.30 deep typ "METRIC" M16 x 2-6H TH'D (33.0)
(SH.1 @ H-2
View B-B )
60
, y z z y |, | z, z y z, z y z, z y
3.82 (97.0) 4.24 (107.8 ) Optional 2 pressure solenoid operated vent compensator DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light (Optional) 1.67 (42.5) Optional 2 pressure solenoid operated compensator 3.89 (99.0) 4.70 (119.4) 2.78 (70.8) 1/2" conduit connector D.C. coil leads w/o conduit connector Manual override pushpin 0.31 (7.98) square key 2.66 (67.7) 1.25 (31.74) 0.39 X 0.31 (10.0 X 8.0) rectangular key 1.39 (35.23) 1.26 (32.0) Compensator adjusting knob (CW rotation increases pressure setting) 2 stage compensator Compensator adjusting knob (CW rotation increases pressure setting) 2 stage compensator 1.91 (48.6) Remote control port 7/16 20 UNF, 0.45/ (11.4) deep 1.91 (48.6) 7.30 (185.5) Optional eye bolt 45 typ 7.13 (181.0) 5.96 (151.4) METRIC 4-bolt mounting flange per ISO 3019/2 0.69 (17.6) 9.31 (236.5) S.A.E. "C" 2-bolt mounting flange per ISO 3019/1 6.30 (160.0) 0.55 (14.0) 9.31 (236.5) DETAIL SAE-SAE 6.61 (168.0) 7.44 (189.0)
1.37 (34.9)
5.96 (151.4)
DETAIL METRIC-METRIC
(SH.2 K-3)
SAE/METRIC
, y y ,
A A
(SH.2 D-3)
61
Support point "SAE" 5/8"-11UNC-2B TH'D X 1.30 deep "METRIC" M16 X 2-6H TH'D (33.0) 9.72 (247.0) 7.48 (190.0)
3.06 (77.78)typ
5.22 (132.6)
Case drain port "METRIC" 3/8-19 BSPP typ "SAE" #8 S.A.E. typ
OUT
IN
OUT
IN
4.37 (111.0)
4.37 (111.0)
10.13 (257.2)
T T
17.33 (440.3) 15.48 (393.1) Inlet port std. SAE 2" pad 2.00 (50.8) typ
23.18 (588.8)
18.38 (466.8)
11.12 (282.4)
4.94 (125.4)
3.89 (98.9) 0.84 (21.44)typ 3.06 (77.78) typ 1.53 (38.89)typ 4.00 (101.5) typ 1.69 typ (42.88)
0.76 (19.2)
SAE/METRIC
"SAE" 1/2"-13UNC-2B TH'D X 1.14 deep typ "METRIC" M12 x 1.75-6H TH'D (29.0) 4 holes
62
, y z z y , | | z, z y z, z y z, z y
3.82 (97.0) 4.24 (107.8 ) Optional 2 pressure solenoid operated vent compensator DIN 43650 connector w/ 1/2" NPT compression fitting and sentinal light (Optional) 1.67 (42.5) Optional 2 pressure solenoid operated compensator 3.89 (99.0) 4.70 (119.4) 2.78 (70.8) 1/2" conduit connector Manual override pushpin Optional 2 stage with load sense compensator 1.65 (42.0) Load sense port "S.A.E." #4 SAE "Metric" 1/4-19 BSPP 2.66 (67.7) Compensator adjusting knob (CW rotation increases pressure setting) 1.85 (46.9) Compensator adjusting knob (CW rotation increases pressure setting) 1.91 (48.6) 2 stage compensator 2 stage compensator 1.91 (48.6) Remote control port 1/19-20 BSPP, 0.48/ (12.2) deep 0.70 (18.0) .47 square key (12.0) .44 square key (11.1) 45 9.00 (229.0) 1.57 (40.0) METRIC 4-bolt mounting flange per ISO 3019/2 7.87 (200.0) 12.80 (325.0) DETAIL METRIC-METRIC S.A.E. D 2-bolt mounting flange per ISO 3019/1 1.94 (49.3) 12.80 (325.0) .81 (20.7)
1.75 (44.42)
DETAIL SAE-SAE
(SH.2 A K-3)
, y y ,
Optional 2 pressure solenoid operated (and vent) compensator Remote control port
63
6.75 (171.5)
(SH.2 @ C-6)
21.55 (547.4)
22.60 (574.0)
5.77 (146.6)
OUT
IN
4.72 (120.0)
Case drain SAE #8 S.A.E. typ 2.24 0.95 METRIC 3/8-19 BSPP (57.0) (24.0) 3.50 (88.9) typ 4.39 (111.6) typ 1.75 (44.5) typ
12.11 (307.6)
6.06 (153.8)
SAE/METRIC
SAE/METRIC
SAE 1/2-13UNC-2B THD X 1.10 deep METRIC M12 X 1.75-6H THD (28.0)
Support point SAE 5/8-11UNC-2B THD X 1.30 deep METRIC M16 X 2-6H THD (33.0)
OUT
IN
T T
y , z
64 VPV Vane Pump
A B 2.81 (71.3)
, z y z y , y, , y
Compensator adjusting knob (CW rotation increases pressure setting) 20.63 (524.1)
OUT IN
y ,
3.44 (87.5) 7.44 (189.0) 2.81 (71.3)
IN
12.11 (307.6) 0.70 (18.0)
T
(SH.2 @ C-6)
19.17 (486.8)
18.51 (470.1)
15.99 (484.4)
17.26 (438.5)
12.87 (326.9)
5.77 (146.6)
OUT
4.72 (120.0)
(SH.2 2 K-6)
5.76 (146.2)
6.06 (153.8)
2.24 (57.0) 0.96 Case drain (24.4) SAE #8 S.A.E. METRIC 3/8-19 BSPP
SAE/METRIC
SAE/METRIC
Inlet port Std. S.A.E. 2 1/2 pad 2.47 typ (62.7) SAE 1/2-13UNC-2B THD X 1.10 deep METRIC M12 X 1.75-6H THD (28.0) 1.94 (49.3)
1.75 (44.5)
1.85 (46.9)
2.08 (52.9)
2.08 (52.9)
45
7.27 (184.7)
7.27 (184.7)
16.08 (408.5)
9.00 (229.0)
16.08 (408.5)
7.65 (194.2)
7.65 (194.2)
1.75 (44.42)
7.87 (200.0)
12.80 (325.0)
DETAIL METRIC-METRIC
.81 (20.7)
12.80 (325.0)
DETAIL SAE-SAE
65
Inches (millimeters)
4.81 (122.3) max. Outlet port SAE #12 SAE METRIC 1/2-14 BSPP Support (Lift) point "SAE" 3/8"-16 UNC-2B TH'D X .59 deep (15.0) "METRIC" M10 x 1.5-6H TH'D X .59 deep (15.0) Support (Lift) point SAE & METRIC M10 X 1.5-6H THD X .40 (10.1)
"SAE" 1/2"-13UNC-2B TH'D X 1.10 "METRIC" M12 X 1.75-6H TH'D (28.0) deep
(SH.1 @ G-1
View B-B )
y , |
.43 deep (11.0) 15.99 (406.1) 12.87 (326.9) 3.62 (92.1) .36 (9.25) 6.30 (160.0) 6.20 (157.4)
Detail METRIC1
0.49 (12.45)
1.86 (47.3)
2.96 (75.1)
.32 (8.1)
6.00 (152.4)
Detail SAE1
4.46 (113.4)
OUT
IN
8.41 (213.7)
9.24 (234.7)
.94 (23.8)
6.50 (165.1)
BOSCH BOSCH
4.65 (118.0)
9.90 (251.5)
1.35 (34.4)
3.84 (97.6)
4.15 (105.5)
(SH.1 @ P-1
View A-A )
66
4.88 (123.9) 1.08 (27.5) 4.21 (106.9) 6.93 (176.0) Optional 2-stage compensator 6.23 (158.4) Remote control 19.15 (486.4) 17.67 (449.0) Inlet port 5.77 (146.6) 8.67 (220.2) 9.36 (237.8)
| z z z y ,
VPV 100/130/164 to VPV 25/32 S.A.E. & Metric Combination
A
8.14 (206.8) 3.53 (89.7)
67
Inches (millimeters)
Support (Lift) point SAE 3/8-16UNC-2B THD X .87 deep (22.0) 87 deep METRIC M10 X 1.5-6H THD X (22.0) 2.00 (50.8) 1.00 (25.4) 1.75 (44.5) 7.27 (184.7) 16.08 (408.5) 7.65 (194.2) 1.75 (44.42)
(SH.2 C-6)
19.79 (502.6)
22.26 (565.3)
20.37 (517.3)
16.78 (426.1)
18.54 (471.0)
13.19 (334.9)
OUT
IN
(SH.2 K-6)
5.76 (146.2)
12.11 (307.6)
SAE/METRIC
1.85 (46.9)
0.70 (18.0)
7.87 (200.0)
12.80 (325.0)
DETAIL METRIC-METRIC
5.77 (146.6)
4.72 (120.0)
6.06 (153.8)
SAE/METRIC
Inlet port Std. S.A.E. 2 1/2 pad 2.47 (62.7) SAE 1/2-13UNC-2B THD X 1.10 deep METRIC M12 X 1.75-6H THD (28.0) 1.94 (49.3) 2.08 typ (52.9)
7.27 (184.7)
45 typ
16.08 (408.5)
9.00 (229.0)
7.65 (194.2)
.81 (20.7)
12.80 (325.0)
DETAIL SAE-SAE
68
Support (Lift) point SAE & METRIC M10 X 1.5-6H THD X 16.78 (426.2) 13.19 (334.9) 3.62 (92.1) 6.20 (157.4) .36 (9.25) .40 (10.1)
6.30 (160.0)
Detail METRIC1
0.49 (12.45)
1.86 (47.3) See detail "SAE1/METRIC1" 1.37 (34.9) 2.75 (69.9) Outlet port Std. S.A.E. 1-1/2" pad 1.46 (37.1) 2.96 (75.1) .32 (8.1)
6.00 (152.4)
Detail SAE1
8.57 (217.7) max. "SAE" 1/2"-13UNC-2B TH'D X 1.10 deep "METRIC" M12 X 1.75-6H TH'D (28.0)
OUT
Control drain SAE #6 S.A.E. METRIC 3/8-19 BSPP Optional VPV25/32 single stage compensator with locking device 8.41 (213.7) 1.35 (34.4) 4.15 (105.5) 4.58 (116.4) .94 (23.8) 6.50 (165.1)
9.24 (234.7)
IN
BOSCH
69
Inches (millimeters)
4.88 (123.9)
View A-A
1.08 (27.5)
4.65 (118.1)
7.33 (186.2)
6.63 (168.6)
18.96 (481.6)
5.77 (146.6)
y , y , y , z y , |
70 VPV Vane Pump VPV 100/130/164 to VPV 45/63/80 S.A.E. & Metric Combination
Inches (millimeters)
Inlet port std. S.A.E. 2 pad 2.00 (50.8)
8.00 (203.1)
(SH.2 C-6)
7.30 (185.5)
5.22 (132.6)
2 stage compensator
1.53 (38.89)
(SH.2 K-6)
19.70 (500.3)
20.74 (526.6)
25.54 (648.8)
17.84 (453.1)
13.48 (342.4)
5.77 (146.6)
OUT
IN
4.72 (120.0)
5.76 (146.2)
12.11 (307.6)
6.06 (153.8)
SAE/METRIC
SAE/METRIC
2 stage compensator
8.67 (220.2)
1.75 (44.5)
SAE 1/2-13UNC-2B THD X 1.10 deep METRIC M12 X 1.75-6H THD (28.0) 2.66 (67.7)
1.91 (48.6)
1.85 (46.9)
Remote control port 1/4-19 BSPP THD 0.48 deep (12.2) Compensator adjusting knob (CW rotation increases pressure setting) 2.08 typ (52.9)
1.94 (49.3)
Remote control port 7/16-20 UNF THD 0.45 deep (11.4) 2.08 typ (52.9)
0.70 (18.0)
7.27 (184.7)
7.27 (184.7)
45 typ
16.08 (408.5)
9.00 (229.0)
16.08 (408.5)
1.57 (40.0)
7.65 (194.2)
7.65 (194.2)
7.87 (200.0)
1.75 (44.42)
12.80 (325.0)
.81 (20.7)
12.80 (325.0)
DETAIL METRIC-METRIC
DETAIL SAE-SAE
Support point SAE 3/8-16UNC-2B THD X 1.30 deep (33.0) 1.30 deep METRIC M10 X 1.5-6H THD X (33.0)
SAE 1/2-13UNC-2B THD METRIC M12 X 1.75-6H THD X 1.14 deep (29.0)
OUT
IN
#4 S.A.E.
71
Inches (millimeters)
6.89 (174.9) max. Support (Lift) point SAE & METRIC M10 X 1.5-6H THD X
2.31 (58.72)
1.16 (29.36)
Outlet port Std. SAE 1 1/4 pad 1.25 SAE 7/16-14 UNC-2B THD typ (31.8) METRIC M12 x 1.75-6H THD typ
1.19 (30.18)
59 (15.09)
Support point SAE 5/8-11UNC-2B THD 1.30 deep (33.0) METRIC M16 X 2-6H THD 1.30 deep (33.0) Support (Lift) point SAE & METRIC M10 X 1.5-6H THD X 17.84 (453.1) 13.48 (342.4) .40 (10.1)
.36 (9.25)
6.30 (160.0)
Detail METRIC1
6.20 (157.4) 0.49 (12.45)
1.86 (47.3)
.32 (8.1)
6.00 (152.4)
Detail SAE1
See detail SAE1/METRIC1 SAE 1/2-13UNC-2B THD X 1.10 METRIC M12 X 1.75-6H THD (28.0) deep
Outlet port 1.37 Std. S.A.E. 1-1/2 pad (34.9) 1.46 2.75 (37.1) (69.9) 5.96 (151.4)
OUT
(SH.1 @ G-1
View B-B )
9.24 (234.7)
8.41 (213.7)
IN
BOSCH
72
5.77 (146.6)
z z z y , z z y , z z y ,
VPV Vane Pump VPV 45/63/80 to an F Gear pump, S.A.E. & Metric Combination
A A
(SH.2 @ C-6)
73
Inches (millimeters)
Support point SAE 3/8-16UNC-2B THD X .59 deep (15.0) .59 deep METRIC M10 X 1.5-6H THD X (15.0) 1.00 2.00 (25.4) (50.8) 7.27 (184.7) 16.08 (408.5) 7.65 (194.2)
9.36 (237.8)
8.67 (220.2)
(SH.2 @ K-6)
0.4 (10.2)
3.33 (84.6)
1.65 (41.91)
1.65 (41.91)
12.87 (326.9)
OUT
IN
5.76 (146.2)
12.11 (307.6)
SAE/METRIC
Remote control port 1/4 19 BSPP TH'D 0.48/(12.2) deep 2.08 typ (52.9)
1.85 (46.9)
0.70 (18.0)
1.57 (40.0)
7.87 (200.0)
12.80 (325.0)
DETAIL METRIC-METRIC
5.77 (146.6)
4.72 (120.0)
6.06 (153.8)
Inlet port Std. S.A.E. 2 1/2 pad 2.47 (62.7) Standard 2 stage compensator
1.75 (44.5)
SAE 1/2-13UNC-2B THD X 1.10 deep METRIC M12 X 1.75-6H THD (28.0) 1.91 (48.6)
SAE/METRIC
Remote control port 7/16-20 UNF TH'D 0.45/(11.4) deep 2.08 (52.9)
1.94 (49.3)
7.27 (184.7)
45 typ
16.08 (408.5)
9.00 (229.0)
7.65 (194.2)
1.75 (44.42)
.81 (20.7)
12.80 (325.0)
DETAIL SAE-SAE
74
43 deep (11.0)
.40 (10.1)
6.30 (160.0)
Detail METRIC1
0.49 (12.45)
1.86 (47.3)
8.57 (217.7) max. "SAE" 1/2"-13UNC-2B TH'D X 1.10 "METRIC" M12 X 1.75-6H TH'D (28.0) deep
(SH.1 @ G-1
See detail "SAE1/METRIC1" Outlet port Std. S.A.E. 1-1/2" pad 1.46 (37.1)
2.96 (75.1)
.32 (8.1)
6.00 (152.4)
Detail SAE1
View B-B )
(SH.1 @ P-1
View A-A )
Gear pump Theoretical Displacement in3/rev (cc/rev) 0.24 (4) 0.34 (5.5) 0.49 (8) 0.67 (11)
Dimension A in. (mm) 1.571 (39.9) 1.618 (41.1) 1.697 (43.2) 1.850 (47.0) 1.870 (47.5) 1.870 (47.6) 1.870 (47.5) 2.169 (55.1) B in. (mm) 3.346 (85.0) 3.445 (87.5) 3.606 (91.6) 3.803 (96.6) 4.0 (101.6) 4.134 (105.0) 4.330 (110.0) 4.543 (115.4) C in. (mm) 15.66 (397.8) 15.71 (399.0) 15.79 (401.0) 15.94 (404.9) 15.96 (405.4) 15.94 (404.8) 15.96 (405.5) 16.26 (41301) D in. (mm) 17.44 (443.2) 17.55 (445.8) 17.70 (449.6) 17.86 (453.3) 18.05 (458.5) 18.22 (463.0) 18.42 (468.0) 18.63 (473.4)
Total Weight (Vane Pump & Gear Pump) lbs. (Kg) 252 (114.3) 252.2 (114.4) 252.4 (114.5) 252.6 (114.6) 252.8 (114.7) 252.9 (114.7) 253.1 (114.8) 253.4 (114.9)
9/16-18 UNF 9/16-18 UNF 9/16-18 UNF 9/16-18 UNF 7/8-14 UNF 7/8-14 UNF
1-1/16-12 UN 7/8-14 UNF 1-1/16-12 UN 7/8-14 UNF 1-1/16-12 UN 7/8-14 UNF 1-1/16-12 UN 7/8-14 UNF 1-1/16-12 UN 7/8-14 UNF
z z z y , z z y , z z y ,
VPV Vane Pump VPV 45/63/80 to an F Gear pump (continued)
A B
(SH.2 @ K-5)
75
Inches (millimeters)
Support point SAE 3/8-16UNC-2B THD X .87 deep (22.0) 87 deep METRIC M10 X 1.5-6H THD X (22.0) 1.00 2.00 (25.4) (50.8) 7.27 (184.7) 16.08 (408.5) 7.65 (194.2)
9.36 (237.8)
4.19 (106.4)
8.67 (220.2)
4.31 (110.0)
13.18 (334.9)
OUT
IN
5.76 (146.2)
12.11 (307.6)
SAE/METRIC
Remote control port 1/4 19 BSPP TH'D 0.48/(12.2) deep 2.08 (52.9)
1.85 (46.9)
0.70 (18.0)
1.57 (40.0)
7.87 (200.0)
12.80 (325.0)
DETAIL METRIC-METRIC
5.77 (146.6)
4.72 (120.0)
6.06 (153.8)
SAE/METRIC
Inlet port Std. S.A.E. 2 1/2 pad SAE 1/2-13UNC-2B THD X 1.10 deep 2.47 METRIC M12 X 1.75-6H THD (28.0) (62.7) Standard 1.91 2 stage compensator (48.6)
1.75 (44.5)
Remote control port 1/4 19 BSPP TH'D 0.45/(11.4) deep 2.08 (52.9)
1.94 (49.3)
7.27 (184.7)
45 typ
16.08 (408.5)
9.00 (229.0)
7.65 (194.2)
1.75 (44.42)
.81 (20.7)
12.80 (325.0)
DETAIL SAE-SAE
76
Inches (millimeters)
(SH.1 @ G-1
View B-B )
Support point "SAE" 3/8"-16 UNC-2B TH'D X .87 deep (22.0) "METRIC" M10 x 1.5-6H TH'D X .87 deep (22.0) Support (Lift) point SAE & METRIC M10 X 1.5-6H THD X .40 (10.1)
6.30 (160.0)
Detail METRIC1
0.49 (12.45)
1.86 (47.3)
8.57 (217.7) max. "SAE" 1/2"-13UNC-2B TH'D X 1.10 "METRIC" M12 X 1.75-6H TH'D (28.0) deep
See detail "SAE1/METRIC1" Outlet port Std. S.A.E. 1-1/2" pad 1.46 (37.1)
2.96 (75.1)
.32 (8.1)
6.00 (152.4)
Detail SAE1
(SH.1 @ P-2
View A-A )
7.27 (184.7)
Dimension A in. (mm) 2.40 (61.0) 2.48 (63.0) 2.54 (64.5) 2.62 (66.5) 2.74 (69.5) 2.95 (75.2) B in. (mm) 5.07 (128.5) 5.26 (133.7) 5.40 (137.2) 5.62 (142.6) 5.87 (149.2) 6.31 (160.2) C in. (mm) 17.0 (430.8) 17.04 (432.8) 17.10 (434.4) 17.18 (436.4) 17.30 (439.4) 17.51 (444.8) D in. (mm) 19.60 (498.4) 19.80 (503.0) 19.90 (506.6) 20.16 (512.1) 20.40 (518.5) 20.85 (529.7)
Gear Pump Port Sizes Inlet 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt 1 " S.A.E. 4 bolt Outlet 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt 3/4" S.A.E. 4 bolt
Total Weight (Vane Pump & Gear Pump) lbs. (Kg) 271.4 (123.1) 271.8 (123.3) 272.3 (123.5) 272.6 (123.6) 273.1 (123.9) 274.1 (124.3)
1.71 (28) 1.95 (32) 2.32 (38) 2.75 (45) 3.42 (56)
77
STC
CASE DRAIN
INPUT
PUMP OUTPUT
remote port
STC
INPUT
PUMP OUTPUT
STC
CASE DRAIN
PUMP OUTPUT
78
REMOTE PORT
CASE DRAIN
INPUT
PUMP OUTPUT
Solenoid two-pressure compensators are available in normally open (normally low, energize to high) and normally closed (normally high, energize to low) versions. These two-pressure controls can greatly reduce horsepower demand and heat generation during periods of idle cycle time, or when the machine operating cycle does not require maximum pressure.
REMOTE PORT
STC
CASE DRAIN
INPUT
PUMP OUTPUT
REMOTE PORT
STC
CASE DRAIN
INPUT
PUMP OUTPUT
79
Source of Sound
Intensity (dB)
Threshold ..........................................0 Rustling leaves ..................................10 ................Barely audible Broadcast studio ..............................20 Typical bedroom at night ....................30 ................Very quiet Typical living room ............................40 VPV16 @ 1200 rpm & 500 psi, deadhead (49 dB) Office, classroom ..............................50 Normal conversation ..........................60 ................Moderate Automobile interior ............................70 VPV130 @ 1800 rpm & 3000 psi, full flow (76 dB) Urban street ......................................80 ................Noisy Heavy truck (15 m) ............................90 ................Very noisy Shout (1.5 m) ..................................100 Construction site ..............................110 Loud rock music ..............................120 ..............Threshold of pain Jet airplane ......................................150 ..............Intolerable Rocket engine ..................................180
80
1) Case drain line is installed too close to the 1) The case drain and pump inlet should be separated by a baffle pump inlet line. in the reservoir. 2) Reservoir is undersized. Rule of thumb is a 2) Add a cooler. minimum or 2 to 3 times pump output flow.
VPV Vane Pump Adapter Kits for VPV Combinations Using P1 Pumps
81
33
45
Trailing pump
Lead pump
32 37
REF 32 33 34 35 36 37 38 39 40 41 42 43 44 45
DESCRIPTION Coupling half, spline Coupling disc Retaining ring Coupling half, combo Set screw Roll pin Adapter Washer Hex head cap screw Jam nut Support Soc. head cap screw O-ring, ASA-043 O-ring
42 41
34
35
39
ADAPTER KITS LIST NUMBER 9 511 230 518 9 511 230 520 9 511 230 521 9 511 230 522 9 511 230 523 9 511 230 524 9 511 230 525 9 511 230 526 9 511 230 527 9 511 230 528 9 511 230 529 9 511 230 530 9 511 230 531 9 511 230 532 9 511 230 533 9 511 230 534 9 511 230 535 9 511 230 536 9 511 230 537 9 511 230 538 9 511 230 539 9 511 230 540 9 511 230 541 9 511 230 542 9 511 230 543 9 511 230 554 9 511 230 594 9 511 230 590 DESCRIPTION VPV 16 to VPV 16 SAE VPV 16 to VPV 16 Metric VPV 16 to SAE F Gear VPV 25/32 to VPV 25/32 Metric VPV 25/32 to VPV 25/32 SAE VPV 25/32 to VPV 16 Metric VPV 25/32 to VPV 16 SAE VPV Metric/SAE 25/32 to SAE F Gear VPV 45/63/80 to VPV 45/63/80 Metric VPV 45/63/80 to VPV 45/63/80 SAE VPV 45/63/80 to VPV 25/32 Metric VPV 45/63/80 to VPV 25/32 SAE VPV 45/63/80 to VPV 16 Metric VPV 45/63/80 to VPV 16 SAE VPV Metric/SAE 45/63/80 to SAE F Gear VPV Metric/SAE 45/63/80 to SAE G Gear VPV Metric 100/130/164 to VPV 100/130/164 VPV SAE 100/130/164 to VPV 100/130/164 VPV Metric 100/130/164 to VPV 45/63/80 VPV SAE 100/130/164 to VPV 45/63/80 VPV Metric 100/130/164 to VPV 25/32 VPV SAE 100/130/164 to VPV 25/32 VPV Metric 100/130/164 to VPV 16 VPV SAE 100/130/164 to VPV 16 VPV Metric/SAE 100/130/164 to SAE F Gear VPV Metric/SAE 32/25 to SAE G Gear VPV Metric/SAE 100/130/164 to SAE G Gear VPV Metric/SAE 100/130/164 to SAE B Spline
Torque Note #1 Torque to 2000 lb/in (Torque to 225 Nm) Torque to 1800 lb/in (Torque to 204 Nm) Torque to 1050 lb/in (Torque to 119 Nm) Torque to 780 lb/in (Torque to 88 Nm) Torque to 550 lb/in (Torque to 62 Nm) Torque Note #2 Torque to 2300 lb/in (Torque to 260 Nm) Torque to 850 lb/in (Torque to 96 Nm) Torque to 550 lb/in (Torque to 62 Nm) Torque to 400 lb/in (Torque to 46 Nm) Torque Note #3 Torque to 800 lb/in (Torque to 90 Nm) Torque to 330 lb/in (Torque to 37 Nm) Torque to 280 lb/in (Torque to 31.5 Nm) Torque to 200 lb/in (Torque to 22.5 Nm)
VPV 100/130/164 VPV 45/63/80 VPV 25/32 VPV 16 & Type G gear pump Type F gear pump
VPV 100/130/164 VPV 45/63/80 VPV 25/32 & Type G gear pump VPV 16 & Type F gear pump
VPV 100/130/164 VPV 45/63/80 VPV 25/32 & Type G gear pump Type F gear pump
82
Through Drive Horsepower Limitations The VPV pumps can be cooupled with other VPV pumps, Bosch gear pumps or other pumps with standard SAE or metric mounting patterns. (VPV pumps can be coupled without losing use of stroke limiter.) VPV combination pumps are rated to carry the load of an additional pump(s) equal to the maximum load the lead VPV pump can generate (see chart).
Pump VPV 16 VPV 25 VPV 32 VPV 45 VPV 63 VPV 80 VPV 100 VPV 130 VPV 164
Flow @ 1750 RPM (gpm) 8.03 12.6 15.4 21.8 29.6 37.2 46.2 60.0 75.8
Maximum Pressure (psig) 3000 3000 3000 3000 3000 3000 3000 3000 3000
Pump #1 Input Horsepower 17.6 25.3 30.7 43.3 58.5 74.6 88.8 117.6 156.5
Maximum Input Power for other pumps 17.6 25.3 30.7 43.3 58.5 74.6 88.8 117.6 156.5
EXAMPLES: VPV 100 @ 3045 psig + VPV 63 @ 3045 psig + VPV 25 @ 3045 psig 88.8 hp 58.5 hp + 23.3 hp VPV 116 @ 3045 psig + VPV 16 @ 1500 psig + VPV 16 @ 1500 psig 17.6 hp 8.7 hp + 8.7 hp
83
Pump Model VPV 16 VPV 25 VPV 32 VPV 45 VPV 63 VPV 80 VPV 100 VPV 130 VPV 164
Nominal Stroke 1.9 mm (0.075) 2.0 mm (0.080) 2.5 mm (0.099) 1.9 mm (0.077) 2.7 mm (0.106) 3.4 mm (0.132) 3.0 mm (0.117) 3.8 mm (0.150) 4.7 mm (0.186)
Decrease in Flow Per Turn 53% 50% 40% 80% 56% 44% 50% 40% 32%
Minimum Flow Attainable <0% 0% 20% <0% 8% 26% 17% 34% 47%
During initial start-up, volume should be at least 30% of maximum flow. Only make adjustments to volume control with pump running at full flow and low pressure while observing output flow.
84
SIZE 16 25 32
REF 1 2 3 4 5 6 7 8 9 10 11 12
QTY 1 4 1 1 1 1 1 1 1 1 1 2
24
23
Volume control
8 7 20 6
12
,
REF 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Repair kits consists of: DESC., VPV16/(VPV25/32) O-ring, ASA-111 / (ASA-111) O-ring, ASA-110 / (ASA-110) O-ring, ASA-127 / (ASA-136) O-ring, ASA-128 / (ASA-128) O-ring, ASA-026 / (ASA-028) O-ring, ASA-151 / (ASA-152) O-ring, ASA-031 / (ASA-031) O-ring, ASA-156 / (ASA-160) Back up ring Shaft seal O-ring, ASA-011 Back up ring Control piston Bias piston
(All O-rings durometer rating = 75)
25 4 21 18 1 22 10 17 13 14 16
SIZE 16 25 32
METRIC 9 511 230 500 9 511 230 501 9 511 230 501
QTY 1 1 2 1 2 2 1 1 2 1 1 1 1 1
26 11
19
2 15
85
2.00.5mm
6.70.5mm
VPV 25/32
Apply loctite sealant #569 to bore & inistall to depth shown. Orientation of bearing seam assemblyslot 25 25
INSTALL BEARINGS FLUSH 0.25mm with LUBRICATING OIL (For cover & body)
Contact technical support for recommended tool for pulling bearings. (414) 554-8595 ext 630 or 701.
COVER BEARING
BODY BEARING
TORQUE RATINGS
TORQUE TO 960 LB-IN (108 Nm) TORQUE TO 700 LB-IN (79 Nm)
VOLUME CONTROL ASSEMBLY 9 537 232 000 REF 1 2 3 4 5 6 Assembly consists of: DESCRIPTION O-ring (-011 / 75) Back up ring Piston Body Adjusting screw Jam nut QTY 1 1 1 1 1 1
OUT
883
1
IN
86
6 3 4 5
1 2
BOLT KIT FOR MOUNTING SINGLE STAGE TO VPV 16/25/32 (M8 X 1.25 X 25) 9 539 232 012
TWO-STAGE COMPENSATOR
COMPLETE ASSSEMBLY FOR TWO-STAGE COMPENSATOR SAE 9 511 230 514 METRIC 9 511 230 515 COMPLETE ASSEMBLY FOR LOAD SENSE SAE 9 511 230 600 METRIC Consult factory REPAIR KIT FOR TWO-STAGE COMPENSATOR SAE 9 511 230 624 METRIC 9 511 230 516 REF 1* 2* 3* 5* 7 8 10 11 12 13 14 15 Repair kit consists of: DESC. (ASA#/durometer) QTY O-ring (-111 / 75) 2 Plug w/ O-ring 1 O-ring (-110 / 75) 1 O-ring (-128 / 75) 1 O-ring (-111 / 75) 1 Poppet second stage 1 Plug w/ O-ring 1 O-ring (-910 / 75) 1 O-ring (-908 / 75) 1 Back up ring 1 O-ring 1 Poppet seat w/ O-ring 1
BOLT KIT FOR MOUNTING TWO STAGE & SOLENOID COMPENSATORS TO VPV 16/25/32 (M8 X 1.25 X 45) 9 539 232 013
87
COMPLETE ASSEMBLY FOR SINGLE STAGE COMPENSATOR 9 511 230 548 SAE and METRIC SEAL KIT FOR SINGLE STAGE COMPENSATOR 9 511 230 545 SAE and METRIC Viton seal kits consist of: DESCRIPTION O-ring 19mm i.d. X 2.5mm c.s. O-ring ASA-916 O-ring 15.3mm i.d. X 2.4mm c.s. O-ring ASA-111 O-ring ASA-143
4 3
REF 1 2 3 4 5
QTY 1 1 1 3 1
Note: Qty of 3, M6 S.H.C.S. not shown. Mounts 2nd stage to 1st stage compensator Torque to 133 - 177 lb/in (Torque to 15 - 20 Nm)
TWO-STAGE COMPENSATOR
COMPLETE ASSSEMBLY FOR TWO-STAGE COMPENSATOR SAE 9 511 230 550 METRIC 9 511 230 551
Torque to 708 - 885 lb/in (Torque to 80 - 100 Nm) Pressure adjustment lock-nut
COMPLETE ASSEMBLY FOR LOAD SENSE SAE 9 511 230 589 METRIC 9 511 230 588 REPAIR KIT FOR TWO-STAGE COMPENSATOR SAE 9 511 230 546 METRIC 9 511 230 552 REF 1 2 3 4 5 6 7 8 9 10 11 12 Repair kit consists of: DESCRIPTION QTY O-ring ASA-113 1 Back up ring 1 O-ring 1 O-ring ASA-111 3 O-ring ASA-143 1 O-ring 15.3, i.d. x 2.4mm c.s. 1 O-ring ASA-111 1 Back up ring 1 O-ring ASA-011 2 Poppet 1 Poppet seat w/ O-ring 1 Plug w/ O-ring 1
1 3 6 5 4
BOLT KIT FOR MOUNTING TWO STAGE & SOLENOID COMPENSATORS TO VPV 45/164 (M10 X 1.5 X 40) 9 539 232 014
88
26
27
28
REF 16 26 27 28 29 30 31
Repair kits consists of: DESCRIPTION O-ring, ASA-146 Adjusting screw Jam nut Body Piston Back up ring O-ring, ASA-113
QTY 1 1 1 1 1 1 1
30 16 29 31
SAE 9 511 230 559 9 511 230 562 9 511 230 563 9 511 230 568 9 511 230 571 9 511 230 572
REPAIR KITS METRIC SAE P1 9 511 230 564 9 511 230 576 9 511 230 566 9 511 230 577 9 511 230 567 9 511 230 578 9 511 230 573 9 511 230 582 9 511 230 574 9 511 230 583 9 511 230 575 9 511 230 584 SEAL KITS SIZE PART NUMBER 45-80 9 511 230 544 100-164 9 511 230 547
METRIC P1 9 511 230 579 9 511 230 580 9 511 230 581 9 511 230 585 9 511 230 586 9 511 230 587
REF 1 2 3 4 5 6 7 8 9 10
Repair kits consists of: DESCRIPTION Key Rotor shaft Vane kit Port plate, cover side Roll pin Thrust block kit Bearing Spacer ring Pressure ring Port plate, body side
QTY 1 1 1 1 4 1 2 1 1 1
REF 13 14 15 16 17 18 19 20 21 22 23 24 24
Viton seal kits consist of: DESC., VPV45/80/(VPV100/164) O-ring, ASA-031 / (ASA-035) O-ring, ASA-162 / (ASA-265) O-ring, ASA-130 / (ASA-229) O-ring, ASA-146 / (ASA-146) Shaft seal O-ring, ASA-229 / (ASA-237) O-ring, ASA-110 / (ASA-110) O-ring, ASA-111 / (ASA-111) O-ring, ASA-143 / (ASA-143) O-ring, ASA-157 / (ASA-160) Back up ring O-ring, ASA-139 / (ASA-152) O-ring, ASA-043 / (ASA-043)
(All o-rings durmoeter rating = 75)
QTY 2 1 1 1 1 1 1 3 1 2 2 2 1
89
17
VPV 45/63/80 Torque to 1800 lb/in (Torque to 204 Nm) 15 VPV 100/130/164Torque to 4970 lb/in (Torque to 562 Nm) 5 9 8 10
14 16
13
3 4 22 23 7 24
90
REF 1 2 3 4 5 6 7
Repair kits consists of: DESCRIPTION O-ring, (-011/75) Back up ring Piston Body Adjusting screw Jam nut O-Ring ASA-113
QTY 1 1 1 1 1 1 1
2 1 3 7
SIZE 16 25 32
SAE 9 511 230 606 9 511 230 598 9 511 230 598
REPAIR KITS METRIC SAE P1 9 511 230 607 9 511 230 608 9 511 230 599 9 511 230 623 9 511 230 599 9 511 230 623
METRIC P1 9 511 230 609 9 511 230 622 9 511 230 622
SIZE 16 25/32
SEAL KITS SAE METRIC 9 511 230 605 9 511 230 605 9 511 230 558 9 511 230 597
Repair kits consists of: DESCRIPTION QTY Key 1 Rotor shaft 1 Vane kit 1 Port plate, cover side 1 Roll pin 4 Thrust block kit 1 Bearing 2 Spacer ring 1 Pressure ring 1 Port plate, body side 1
Viton seal kits consist of: Desc., VPV16/(VPV25/32) QTY O-ring, ASA-111 / (ASA-111) 1 O-ring, ASA-110 / (ASA-110) 1 O-ring, ASA-127 / (ASA-136) 2 O-ring, ASA-128 / (ASA-128) 1 O-ring, ASA-026 / (ASA-028) 2 O-ring, ASA-151 / (ASA-152) 2 O-ring, ASA-031 / (ASA-031) 1 O-ring, ASA-156 / (ASA-160) 1 Back up ring 2 Shaft seal 1 O-ring, ASA-011 1 Back up ring 1 Control piston 1 Bias piston 1
(All o-rings durmoeter rating = 75)
VPV Vane Pump 3000 PSI Repair Parts VPV 16/25/32 SINGLE STAGE COMPENSATOR
91
ATTENTION: These compensators are rated for 210 bar (3000 psi) operation. Install only on pumps rated at 210 bar (3000 psi). Activating shock clipper is highly recommended on all applications greater than 140 bar (2000 psi). Install unrestricted line back to tank.
COMPLETE ASSSEMBLY FOR SINGLE STAGE COMPENSATOR SAE 9 511 230 595 METRIC 9 511 230 596 REPAIR KIT FOR SINGLE STAGE COMPENSATOR SAE 9 511 230 625 METRIC 9 511 230 626 REF 1 2 3 4 5 6 7 Repair kit consists of: DESCRIPTION O-ring (-011 / 75) Plug w/ O- ring O-ring (-110 / 75) O-ring (-018 / 75) O-ring (-128 / 75) Back up ring O-ring QTY 1 1 1 1 1 1 1
6 3 4 5
1 2
BOLT KIT FOR MOUNTING SINGLE STAGE TO VPV 16/25/32 (M8 X 1.25 X 25) 9 539 232 012
TWO-STAGE COMPENSATOR
COMPLETE ASSSEMBLY FOR TWO-STAGE COMPENSATOR SAE 9 511 230 601 METRIC 9 511 230 602 COMPLETE ASSEMBLY FOR LOAD SENSE SAE 9 511 230 603 METRIC 9 511 230 604 REPAIR KIT FOR TWO-STAGE COMPENSATOR SAE 9 511 230 627 METRIC 9 511 230 628 REF 1* 2* 3* 5* 7 8 10 11 12 13 14 15 Repair kit consists of: DESC. (ASA#/durometer) QTY O-ring (-111 / 75) 2 Plug w/ O-ring 1 O-ring (-110 / 75) 1 O-ring (-128 / 75) 1 O-ring (-111 / 75) 1 Poppet second stage 1 Plug w/ O-ring 1 O-ring (-910 / 75) 1 O-ring (-908 / 75) 1 Back up ring 1 O-ring 1 Poppet seat w/ O-ring 1
BOLT KIT FOR MOUNTING TWO STAGE & SOLENOID COMPENSATORS TO VPV 16/25/32 (M8 X 1.25 X 45) 9 539 232 013
92
2.00.5mm
6.70.5mm
VPV 25/32
Apply loctite sealant #569 to bore & inistall to depth shown. Orientation of bearing seam assemblyslot 25 25
INSTALL BEARINGS FLUSH 0.25mm with LUBRICATING OIL (For cover & body)
Contact technical support for recommended tool for pulling bearings. (414) 554-8595 ext 630 or 701.
COVER BEARING
BODY BEARING
TORQUE RATINGS
TORQUE TO 960 LB-IN (108 Nm) TORQUE TO 700 LB-IN (79 Nm)
VOLUME CONTROL ASSEMBLY 9 537 232 000 REF 1 2 3 4 5 6 Assembly consists of: DESCRIPTION O-ring (-011 / 75) Back up ring Piston Body Adjusting screw Jam nut QTY 1 1 1 1 1 1
OUT
883
IN
93
COMPLETE ASSEMBLY FOR SINGLE STAGE COMPENSATOR Consult factory. SEAL KIT FOR SINGLE STAGE COMPENSATOR Consult factory. Viton seal kits consist of: DESCRIPTION O-ring 19mm i.d. X 2.5mm c.s. O-ring ASA-916 O-ring 15.3mm i.d. X 2.4mm c.s. O-ring ASA-111 O-ring ASA-143
REF 1 2 3 4 5
4 3
QTY 1 1 1 3 1
Note: Qty of 3, M6 S.H.C.S. not shown. Mounts 2nd stage to 1st stage compensator Torque to 133 - 177 lb/in (Torque to 15 - 20 Nm,)
TWO-STAGE COMPENSATOR
COMPLETE ASSSEMBLY FOR TWO STAGE COMPENSATOR SAE 9 511 230 610 METRIC 9 511 230 611
Torque to 708 - 885 lb/in (Torque to 80 - 100 Nm) Pressure adjustment lock-nut
COMPLETE ASSEMBLY FOR LOAD SENSE SAE 9 511 230 612 METRIC 9 511 230 613 REPAIR KIT FOR TWO-STAGE COMPENSATOR SAE 9 511 230 660 METRIC 9 511 230 661 REF 1 2 3 4 5 6 7 8 9 10 11 12 Repair kit consists of: DESCRIPTION QTY O-ring ASA-113 1 Back up ring 1 O-ring 1 O-ring ASA-111 3 O-ring ASA-143 1 O-ring 15.3, i.d. x 2.4mm c.s. 1 O-ring ASA-111 1 Back up ring 1 O-ring ASA-011 2 Poppet 1 Poppet seat w/ O-ring 1 Plug w/ O-ring 1
1 3 6 5 4
BOLT KIT FOR MOUNTING TWO STAGE & SOLENOID COMPENSATORS TO VPV 45/164 (M10 X 1.5 X 40) 9 539 232 014
94
26
27
28
REF 16 26 27 28 29 30 31
Repair kits consists of: DESCRIPTION O-ring, ASA-146 Adjusting screw Jam nut Body Piston Back up ring O-ring, ASA-113
QTY 1 1 1 1 1 1 1
30 16 29 31
SAE 9 511 230 639 9 511 230 639 9 511 230 641 9 511 230 650 9 511 230 650 9 511 230 651
REPAIR KITS METRIC SAE P1 9 511 230 644 9 511 230 642 9 511 230 644 9 511 230 642 9 511 230 645 9 511 230 643 9 511 230 654 9 511 230 652 9 511 230 654 9 511 230 652 9 511 230 655 9 511 230 653
METRIC P1 9 511 230 646 9 511 230 646 9 511 230 647 9 511 230 656 9 511 230 656 9 511 230 657
SEAL KITS SIZE SAE METRIC 45-80 9 511 230 658 9 511 230 658 100-164 9 511 230 659 9 511 230 659
REF 1 2 3 4 5 6 7 8 9 10
Repair kits consists of: DESCRIPTION Key Rotor shaft Vane kit Port plate, cover side Roll pin Thrust block kit Bearing Spacer ring Pressure ring Port plate, body side
QTY 1 1 1 1 4 1 2 1 1 1
REF 13 14 15 16 17 18 19 20 21 22 23 24 24
Viton seal kits consist of: DESC., VPV45/80/(VPV100/164) O-ring, ASA-031 / (ASA-035) O-ring, ASA-162 / (ASA-265) O-ring, ASA-130 / (ASA-229) O-ring, ASA-146 / (ASA-146) Shaft seal O-ring, ASA-229 / (ASA-237) O-ring, ASA-110 / (ASA-110) O-ring, ASA-111 / (ASA-111) O-ring, ASA-143 / (ASA-143) O-ring, ASA-157 / (ASA-160) Back up ring O-ring, ASA-139 / (ASA-152) O-ring, ASA-043 / (ASA-043)
(All o-rings durmoeter rating = 75)
QTY 2 1 1 1 1 1 1 3 1 2 2 2 1
95
Ro t
at
ion
96
10 4
5 11
12
ITEM # 1 2 3 4 5 6 7 8 9 10 11 12
VPV tool kit consists of: DESCRIPTION Wrench adapter, 13mm Wrench adapter, 17mm Wrench adapter, 19mm, VPV25/32 Wrench adapter 24mm, VPV45/63/80 Wrench adapter, 30mm, VPV100/130/164 Extension bar, 3 8 socket Extension bar, 1 2 socket Spanner socket, VPV100/130/164 Spanner socket, VPV45/63/80 Crowfoot, VPV16/25/32, locknut Spanner wrench, VPV45/63/80 Spanner wrench, VPV100/130/164
97
SHOCK PRESSURE
RECOVERY TIME DEADHEAD PRESSURE RESPONSE UNDERSHOOT PRESSURE RIPPLE 3000 PSi
75% OF DEADHEAD MAX. RATE OF PRESSURE RISE RECOVERY UNDERSHOOT MAX. RATE OF PRESSURE DROP PRESSURE
3950 PSI 3500 PSI 3000 PSI 2550 PSI 2300 PSI
VPV 16, Single stage compensator, plot with shock clipper inactive. (Response overshoot of 950 PSI, response undershoot of 700 PSI)
PRESSURE
VPV 16, Single stage compensator, plot with shock clipper active. (Response overshoot of 500 PSI, response undershoot of 450 PSI)
TIME
98 Notes: