Beruflich Dokumente
Kultur Dokumente
Web: www.threebond.co.uk or www.threebond.co.jp e-mail: sales@threebond.co.uk Three Bond Europe SAS (UK Branch) 5 Newmarket Court, Kingston, Milton Keynes, MK10 0AG. TEL: 01908 285000 FAX: 01908 285001
June 2007
2. Formats Available Three Bond TB2217H is available packaged in most industry standard formats; Pump Print cassette 20ml and 30ml syringe (Panasonic, Fuji, Iwashita, EFD) 370g cartridge 3. Properties before Curing Properties Chemical type Appearance Viscosity at 25C Specific Gravity Thixotropic Index Curing time at: 80C 100C 120C 150C Shelf life at 25C 5C Result Epoxy Pink Paste 154 1.24 2.9 200~230 70~100 50~80 35~65 5 7 Unit Test Method
TB 2217H
Page 1 of 3
TECHNICAL BULLETIN
4. Properties after Curing Properties Shore- Hardness Shear strength Glass transition temperature Coefficient of thermal expansion Water absorption (100C x 1 h) 5. Electrical Properties Properties Surface Resistivity Volume Resistivity Dielectric Constant (1MHz) Dielectric Breakdown Voltage Result 9.2 x 1013 1.7 x 1014 3.26 24 Unit .m kV/mm Result 88 D 22.8 99 7.7 x 10-5 + 0.62 Unit
TB2217H
MPa C C-1 %
6. Instructions Three Bond TB2217H is supplied de-bubbled in a range of syringe types, cartridge or pump print cassettes, for use in a variety of dispensing systems. Keep the product tightly closed in the original container snd store it in a dark, dry, sufficiently ventilated and cool place at 5 ~ 10C. After storage the product must be allowed to stabilise at room temperature before use, typically 24 hours According to the nature of the application, optimise dispense pressure, time, nozzle size and temperature in order to achieve desired dispense quantity of adhesive. For optimum results the dispensing temperature should be controlled to 30 ~ 35C. When a precision resin is used, changes in viscosity versus the ambient temperature are to be verified, especially below 20C.
TB 2217H
Page 2 of 3
TECHNICAL BULLETIN
TB2217H
TB2217H SMT adhesive is suitable for printing with an 80 mesh screen or a stencil using conventional printing technology typical to solder paste printing. The degree of curing varies depending upon the temperature and the duration of the process. Resin once transferred into another container should not be returned to the original container. Excess sealant can be easily wiped off with a cloth. Uncured adhesive can be cleaned from boards or machines using butoxy ethanol cleaners or TB2706 degreaser. If the product contacts the skin, remove with a cloth and wash the affected area with soap and water. For specific advice consult the relevant Material Safety Data Sheet.
7. Ordering Information TB2217H-PP Pump Print cassette TB2217H-B 370g cartridge TB2217H-L20 Musashi syringe 20ml for Panasonic TB2217H-L30 Musashi syringe 30ml for Panasonic TB2217H-M Fuji syringe 30ml TB2217H-R Iwashita 30ml syringe Other formats available upon request.
Data given here were compiled to the best of our knowledge and are based on experiments and tests of our Company. We cannot guarantee the results obtained through the use of our products, and all products are sold and samples given without any warranty, expressed or implied, of fitness for any particular purpose or otherwise and upon condition that the user shall make his own tests to determine the suitability of the product for his purpose. TB 2217H Page 3 of 3