Beruflich Dokumente
Kultur Dokumente
Intro
Open Adder is the only free, fully featured MySpace friend adder.
Installation
Your demo version of Open Adder can be downloaded from
www.openadder.com. After downloading Open Adder, double-click on it and it
will begin installing. Please ensure you select to save the program to your C
drive under your program files (C:Program Files). Choosing to save the program
in a different location could cause problems when running it. You will have the
option to add a desktop icon for convenience.
Activation
To activate the full version of Open Adder you will need to refer two friends to
download the demo (they must download it). You will then get access to the
secret activation page and a coupon to activate it. If you do not receive a coupon
to activate your copy, two people have not downloaded the demo via your
referral.
You may also provide a link on your site to openadder.com to activate the full
version of Open Adder. The link must read “MySpace Friend Adder” and link to
www.openadder.com. Once you have done this, please visit
http://www.openadder.com/forum/ and go to the section titled “Open Adder
Discussion” “Downloading and Activating Open Adder” “Links to Open
Adder for Activation”. Post the link to your site where you have linked to Open
Adder ALONG WITH your ID# and once we verify you have followed these steps,
we will send you instructions on activating the full version of Open Adder.
These are the ONLY TWO methods that may be used to upgrade to the full
version of Open Adder. You may not buy it or receive activation under any other
terms.
You may log into your account at any time to check the status of your account
and see if you've been upgraded to the full version. Although an email is sent to
you as soon as you are upgraded, sometimes these emails get lost in “Spam”
folders or overlooked. If you feel you should have received your email but don't
see it, log into your download account and check manually.
Then select “Add” and enter your MySpace account email and password. Don’t
worry, even though you can see your password it is encrypted for your security.
To begin sending Friend Requests, you will need to first extract profile IDs.
Open Adder will begin extracting the IDs on the page, or pages if there are
multiple pages.
You can click “Stop” if you would like it to stop extracting. You can also use the
“Pause” button if you would like to pause any of the processes.
Once you have extracted some IDs, ensure you have selected “Send Friend
Requests” and click “Start”.
Note you have the option to “Limit # To Send”, meaning you can tell Open Adder
to only send a certain number of Friend Requests. It’s best not to try to send too
many at one time, slow and steady is the way to go.
If you have a new account, it is recommended you not send more than 50
requests at a time. You could risk losing your MySpace account if you appear to
be a spammer.
*Note: You can send Friend Requests and messages at the same time by
selecting the “Send Both” option instead of the “Send Friend Requests” option.
We’ll talk about sending messages next.
Sending Messages
To send messages, click the “Send Messages” option on the left-hand panel. A
“Subject” Box and a “Message Box” will pop-up. Simply enter a subject into the
Sending Comments
To accept Friend Requests, just click “Accept Requests”. You can choose this
option no matter what page you are on. Open Adder will automatically go to your
Pending Friend Requests folder and accept any pending requests. Once it’s
finished a pop-up box will notify you that it has “Finished accepting friend
requests”.
Posting Bulletins
To post bulletins, you will first need to enter a Bulletin. You can manage multiple
Bulletins with Open Adder. Click on “Post Bulletins” and a Bulletin space will
open up. You will also notice the option to “Manage Bulletins”. Choose the
“Manage Bulletins” option and a “Manage Bulletins” box will pop up. This box will
show you your existing Bulletins and allow you to add, edit or delete Bulletins.
Another box titled “Bulletin” will pop up. Enter your Bulletin subject in the
“Subject” field and enter the body in the “Message” field. Then select the interval
of time you would like this particular bulletin to be sent out at, i.e., 60 minutes, 1
hour, 10 hours, etc.
When you’re finished, click “OK”. If you aren’t ready to save this Bulletin, click
“Cancel”.
Event Invites
To begin sending Event Invites, go to the event’s main page. Then select the
“Event Invites” option.
You will now have the choice of selecting to send the invites to “Scanned IDs” or
“By Location”.
If you need to stop sending, simply click “Stop”. You will be notified by Open
Adder once all of your invitations have been sent.
Options
By selecting the “Options” dropdown menu from the top, you will notice several
other Open Adder Options.
If you would like to import IDs into Open Adder, click the Options menu at the top
and when hovering your mouse over “Import IDs” you will have the option to
import IDs from a text file or import IDs manually.
Clicking on “Import from File” will bring up an import box that will allow you to
select the file you’d like to import. Simply click “Browse”, find the file you want to
import, highlight it, click “Open” and then “OK”. The file will now be imported for
you to work with.
Clicking on “Import Manually” will open up an import box that will allow you to
copy, paste, and add profile IDs to work with. Just enter the IDs and click “Add”.
Now you can work with those specific IDs.
Export IDS
The “Export IDs” option allows you to export IDs to a text file to work with later or
to work with in another program. Just extract the IDs you’d like to save, as
discussed above, and click “Options”, “Export IDs”, and choose what file you
would like to save the IDs in. Once you’ve done that, click “Save” and you’re
finished!
Disable Images
If you would like to disable images, simply select that option under “Options” at
the top. To re-enable images, click the “Disable Images” option again.
CAPTCHA
You have the option to enable CAPTCHA Bypass when adding friends. Open
Adder will often bypass CAPTCHA but not always. It’s simply not reliable on all
profiles so we cannot guarantee it will always work as sites such as MySpace
use many servers with many different codes.
Generally you can reduce the amount of times you will run into CAPTCHA by
increasing the Time Delay (discussed below).
Time Delay
The “Time Delay” option under the “Options” tab allows you to set the length of
time you would like messages, comments, and requests sent between.
For example, if you would like your messages, comments, and requests sent
every 5 to 10 minutes, select “from 5 minutes to 10 minutes”. It is recommended
that you set the delay around “human speed.”
Accounts
Manage Accounts
The “Manage Accounts” tab will not only allow you to add, edit or delete accounts
but also allows you to view how many Friend Requests, Messages, Comments,
etc. have been sent per each account.
Just highlight the account you want to view the stats for and check out the stats
on the right.
You can also clear your Friends Log, Messages Log, or Comments Log for each
account from here.
By clicking on the “View All Time Stats” under the “Account” options you can see
the total number of Friends Requested, total Messages sent, total Comments,
Bulletins and Invites sent along with IDs skipped and why they were skipped as
discussed in the paragraph above for all of your accounts combined.
If you have multiple MySpace accounts that you’d like to work with in Open
Adder, the “Chaining” feature is a handy option that will send Friend Requests,
Messages, both Requests and Messages, or Bulletins through each of your
accounts, one after the other.
The Chaining feature works just like sending Friend Requests, Messages, etc.,
normally works. The Chaining feature simply sends whatever you are sending
through ‘Account A’, then ‘Account B’, then ‘Account C’, etc.
First you will need to extract some profile IDs to work with as you normally would.
If you are sending Messages, go ahead and enter the Subject and Message you
want to send. Then click “Chaining” under the “Options” tab and select what you
want to send…Friend Requests, Messages, both Requests and Messages, or
Bulletins. Then select the accounts you want to send from and click “Start”.
Clicking “About” and then “Open Adder” will show you the version of Open Adder
that you are running as well as Copyright information.