Sie sind auf Seite 1von 106

PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT

SECTION NO 1
SANS 1200A PRELIMINARY AND GENERAL
(Applicable to the whole of the Works)
SANS1200A.8.3 FIXED CHARGE ITEMS
1 SANS 1200A.8.3.1 Contractual requirements. SUM 1 0.00
SANS 1200A.8.3.2 Establishment of Facilities on the Site
2 SANS 1200A.8.3.2.2j Plant. SUM 1 0.00
3 Allow the sum of R for hiring of SUM 1 0.00
standby generator, including transporting
to site, working on site, diesel fuel and
removing from site at contract completion.
4 SANS 1200A.8.3.3 Other fixed charge obligations. SUM 1 0.00
5 SANS 1200A.8.3.3 Allow the sum of R for purchase SUM 1 0.00
and delivery to site, of sundry site
equipment.
6 SANS 1200A.8.3.3 Allow the sum of R for the SUM 1 0.00
fabrication, delivery and erection in the
required position on site, of ALL labelling,
informational and safety signage, etc.,
complete, all as instructed by the ABB
Project Manager
7 SABS 1200A.8.3.4 Removal of site establishment. SUM 1 0.00
Balance c/f R 0.00
Page 1 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200A.8.4 TIME RELATED ITEMS
SABS 1200A.8.4.2.1 Facilities for Engineer & Contractor:
8 SABS 1200A.8.4.2.1a Furnished offices.
Office accommodation for personnel shall MTHS 8 0.00
be able to accommodate SIX (6) persons
comfortably and shall have separate boardroom,
kitchenette and toilet facilities. This sum is to
include for all loose furniture and fittings,
electric lighting, power outlets.
drawing rack, 2 no. office desks and 4 no.
office chairs. overall size of 3m wide x 6m long
9 SABS 1200A.8.4.2.2a Workshop, Lab and Storage sheds. MTHS 8 0.00
10 SABS 1200A.8.4.2.2e Ablution and latrine facilities (chemical portable MTHS 8 0.00
toilets to be well maintained / serviced for the
entire duration of the contract).
11 SABS 1200A.8.4.2.2f Tools and equipment. MTHS 8 0.00
12 SABS 1200A.8.4.2.2g Water supplies 2500 L Tank MTHS 8 0.00
available from beginning of contract and for
entire duration of the contract).
SANS 1200A.8.3.2.2j Allow the sum of R for hiring of standby MTHS 8 0.00
generator, including transporting to site,
working on site, diesel fuel and removing
from site at contract completion.
13 SABS 1200A.8.4.2.2i Access to the site. MTHS 8 0.00
14 The Contractor is to note that all Security MTHS 8 0.00
and Access Control requirements must
be in accordance with and conform to
'National Keypoint Standards.'
15 SABS 1200A.8.4.2.2j Plant. MTHS 8 0.00
16 SABS 1200A.8.4.3 Supervision for duration of construction. MTHS 8 0.00
Balance c/f 0.00
Page 2 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f 0.00
17 SABS 1200A.8.4.4 Company and head office overhead costs MTHS 8 0.00
for duration of construction.
18 SABS 1200A.8.4.5 The Contractor is to take cognizance of the MTHS 8 0.00
Environmental Management Programme
Act, a copy of which is attached hereto and
forms part of the contract documents. The
Contractor is to allow a lump-sum price
which he deems sufficient to enable him to
meet any costs he will encounter in the
application of the various clauses in the
Environmental Management Programme,
for the entire duration of the contract.
19 SABS 1200A.8.4.5 The Contractor is to allow for compliance MTHS 8 0.00
with ALL CURRENT ABB Health and
Safety requirements, procedures and
legislation (OHSACT), which includes
the employment of registered safety
officer/s, as well as the procurement
and use on site, of ALL necessary
PPE wear.

TOTAL - carried forward to FINAL SUMMARY R 0.00
Page 3 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 4 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 5 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 6 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 7 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 8 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
Notes (As Applicable to the ENTIRE measured
Bills of Quantities, namely Section No. 2,
Bill No.'s 1 to 15 inclusive, Sections 3 to 10
inclusive) :
1. 'Section No. 2 : Civil Works' have been
measured according to the SABS 1200 System
for Measuring Civil Works as published by the
SABS. All quantities are provisional and subject
to remeasurement during the project.
2. For pricing purposes all items are to be
read in conjunction with the tender
drawings. No additional compensation will
be made for any information shown on the
drawings but not mentioned in the Bills of
Quantities - the drawings take precedence
over the Bills of Quantities
3. All 'Imported Material' for earthworks will be
obtained either from a commercial source,
as selected by the contractor and shall be
regarded as freehaul.
4. All surplus excavated material is to be disposed
of at a registered, designated dumping site, as
selected by the Contractor, which cost is to
include for all sundry charges, royalties, etc.
5. All cut and fill materials will be regarded as
freehaul, ie. haulage, loading and offloading
of material shall be included in the rates
submitted by the Contractor - NO additional
compensation whatsoever shall be entertained,
or additional monies paid in this regard.

Balance c/f R 0.00
Page 8 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SECTION 2 : BILL NO. 1
BULK EARTHWORKS, LANDSCAPING, ETC.
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.1 Site Preparation:
1 SABS 1200D.8.3.1.1 Clear and strip 150mm site, including in confined m
2
210,000.00 0.00
areas and remove
SABS 1200D.8.3.2 Bulk excavation:
2 SABS 1200D.8.3.2a Cut for reduced levels in terracing, stockpile m
3
8,540.00 0.00
to be used in fill
SABS 1200D.8.3.2b Extra over for:
3 SABS 1200D.8.3.2b.1 Intermediate excavation. m
3
854.00 0.00
4 SABS 1200D.8.3.2b.2 Hard rock excavation, including blasting and m
3
427.00 0.00
breaking down of all rock material to rocks /
stones of manageable size
SABS 1200D.8.3.4a Importing materials from Commercial sources
and placing in:
5 Imported suitable G7 / G8 earth fill material m
3
13,643.00 0.00
to form terrace, including compacting in
150mm thick layers to a minimum of 95%
Mod. AASHTO maximum density @
+/- 2% Optimum Moisture Content (OMC),
including tieing / benching into existing in-situ
material / embankment / terrace.
SABS 1200D.8.3.1 Site preparation:
6 Soil poisening to be sprayed over terraces m
2
0.00
7 SABS 1200D.8.3.4a Supply and spread 26,5mm nominal diameter m2 0.00
yardstone from commercial sources, in 100mm
thick layer and lightly compact to set levels.
SABS 1200MK. KERBING AND CHANNELING
SABS 1200MK.8.2.1 Precast concrete barrier kerb to SABS 927
complete with 15MPa/19mm in-situ concrete
haunching at joints, both sides:
8 Kerbs laid straight (edge of terrace). m 0.00
TOTAL - carried forward to section SUMMARY R 0.00
Page 9 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION 2 : BILL NO. 2
CIVIL WORKS
ACCESS AND TERRACE ROADS
THE FOLLOWING IN 6M WIDE CONCRETE
SABS 1200D. EARTHWORKS ( TERRACE ROAD)
1 Cut for reduced levels in road, and cart away m3 1022.70 0.00
to a location located by contractor
SABS 1200MF. BASE
SABS 1200MF.8.3.3 Construct base with material from commercial
sources:
2 SABS 1200MF.8.3.3b Imported suitable G5 earth fill material m
3
438.30 0.00
to form road, including compacting in
150mm thick layers to a minimum of 95%
Mod. AASHTO maximum density @
+/- 2% Optimum Moisture Content (OMC),
including tieing / benching into existing in-situ
material / embankment / road
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.2 Smooth formwork to :
3 Sides of roads m
2
194.80 0.00
SABS 1200G.8.2.4 Special off-form:
4 Form 25 x 25mm Chamfered edge along m 974.00 0.00
exposed top edge of concrete.
SABS 1200G.8.3 REINFORCEMENT
SABS 1200G.8.3.2 Mesh Reinforcement :
5 High tensile welded mesh reference 311 to m
2
2922.00 0.00
road.
SABS 1200G. REINFORCED CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/ 19mm concrete:
6 50mm Minimum thick. m
3
146.10 0.00
7 SABS 1200G.8.4.3 Strength concrete, 25MPa/19mm with m
3
584.40 0.00
SABS 1200G.8.4.4 Unformed surface finishes:
8 SABS 1200G.8.4.4a Wood floated finish to top surface of concrete m2 2922.00 0.00
to slight falls.
Balance c/f R 0.00
Page 14 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION 2 : BILL NO. 2
Balance b/f R 0.00
SABS 1200G.8.5 JOINTS
9 12mm Thick expansion joint not exceeding m 97.40 0.00
300mm high or wide consisting of joint filler,
raking out of joint filler 15mm deep on
exposed surfaces and fill with polysulphide
sealant and bond breaker.
10 SABS 1200MM.8.2.5 Additional item m 487.00 0.00
Construct V-Drain with Stone-Pitching
800mm wide and 550mm deep complete
Sundries:
Allow for intersection with existing gravel m 5.00 0.00
road, including tieing in all layers, to form
consistent and even finished surface.
SABS 1200D. EARTHWORKS ( ACCESS ROADS )
200m Assumed
SABS 1200D.8.3.1 Site Preparation:
11 SABS 1200D.8.3.1.2 Remove topsoil to a nominal depth of 100mm, m
2
642.00 0.00
and compact insitu to 93%
12 Cut for reduced levels in road, and cart away m3 224.70 0.00
to a location located by contractor
SABS 1200D.8.3.4a Importing materials from Commercial sources
and placing in:
13 Imported suitable G5 earth fill material m3 128.40 0.00
to form road, including compacting in
150mm thick layers to a minimum of 95%
Mod. AASHTO maximum density @
+/- 2% Optimum Moisture Content (OMC),
including tieing / benching into existing in-situ
material / embankment / road
TOTAL - carried forward to section SUMMARY R 0.00
Page 15 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 3
BASE FOUNDATIONS
THE FOLLOWING IN BASE FOUNDATIONS
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.3 Restricted Excavation:
1 SABS 1200D.8.3.3a Excavate for bases in all materials and m3 644.57 0.00
dispose to a site provided by the Contractor
(excludes over-excavation)
2 Extra over excavation in soft material for m3 64.46 0.00
battering trench sides / shoring for depths
greater than 1,0m
SABS 1200D.8.3.3b Extra over for:
3 SABS 1200D.8.3.3b.1 Intermediate excavation. m3 70.90 0.00
4 SABS 1200D.8.3.3b.2 Hard rock excavation. m3 32.23 0.00
5 SABS 1200D.8.3.3b.3 Boulder excavation Class A. m3 32.23 0.00
SABS 1200D.8.3.9 Backfilling:
6 Backfilling in restricted areas around base, m3 286.15 0.00
stub column and to battered slopes, with
excavated material including mechanical
modification including mechanical modification
and compacting to 95% Mod. AASHTO
maximum density
Balance c/f R 0.00
Page 32 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200DB. EARTHWORKS (PIPE TRENCHES)
SABS 1200DB.8.3.4 PARTICULAR ITEMS
SABS 1200DB.8.3.4b Temporary Works : Control Water Inflow
from low water table, during excavations:
7 SABS 1200DB.8.3.4b.1 Provide equipment. SUM 1.00 0.00
8 SABS 1200DB.8.3.4b.2 Operate and maintain. Days 1.00 0.00
9 SABS 1200DB.8.3.4b.3 Remove equipment Sum 1.00 0.00
SABS 1200G. CONCRETE (STRUCTURAL)
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.1 Rough:
10 Sides of base, stub columns. m2 303.04 0.00
SABS 1200G.8.2.2 Smooth:
11 Sides of base, stub columns. m2 171.99 0.00
SABS 1200G.8.2.4 Special off-form:
12 Form 25 x 25mm chamfer along top edge m 287.60 0.00
of exposed stub column.
SABS 1200G.8.3 REINFORCEMENT
SABS 1200G.8.3.1 Steel reinforcement bars:
13 All diameter bars (Provisional). kg 14366.000 0.00
SABS 1200G.8.4 CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/ 19mm concrete:
14 50mm Minimum thick. m3 23.45 0.00
Balance c/f R 0.00
Page 33 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200G.8.4.3 Strength concrete, 30MPa/19mm with
'Pro-Struct 539' integral waterproofer added
at the rate of 1,5 litres per 50kg cement in:
15 Bases and stub columns. m3 357.19 0.00
SABS 1200G.8.4.4 Unformed surface finishes:
16 SABS 1200G.8.4.4a Wood floated finish to top surface of bases, m2 51.85 0.00
including working in confined areas.
SABS 1200G.8.7 GROUTING
SABS 1200G.8.7a Under bases:
17 Non-shrink, non-metallic, free-flowing m3 2.74 0.00
35MPa grouting under base plates
SABS 1200G.8.8 HOLDING DOWN BOLTS AND
MISCELLANEOUS
18 Provide and install Grade 4.8 M20 x 460mm kg 0.00 0.00
long galvanized mild steel bolt with 75mm
length threaded at exposed end and fitted
with suitable nut and washer, and with 70 x
70 x 12mm thick anchor plate welded on at
other end, bolt cast 350mm deep into
concrete stub column base in exact position
19 Provide and install Grade 4.8 M24 x 460mm kg 0.00 0.00
long galvanized mild steel bolt with 75mm
length threaded at exposed end and fitted
with suitable nut and washer, and with 80 x
80 x 14mm thick anchor plate welded on at
other end, bolt cast 350mm deep into
concrete stub column base in exact position
20 Provide and install Grade 4.8 M36 x 460mm kg 0.00 0.00
long galvanized mild steel bolt with 75mm
length threaded at exposed end and fitted
with suitable nut and washer, and with 350
x 120 x 16mm thick anchor plate welded on
at other end, bolt cast 350mm deep into
concrete stub column base in exact position
TOTAL - carried forward to section SUMMARY R 0.00
Page 34 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 4
DRAINAGE
THE FOLLOWING IN SUBSOIL DRAINS
SABS 1200DB. EARTHWORKS (PIPE TRENCHES)
SABS 1200DB.8.3.2a Excavate in all materials for trenches and
use for backfill, compact and dispose of
surplus material:
1 Depth not exceeding 1m deep (sub-soil m
3
115.80 0.00
drains)
2 Depth not exceeding 1m deep (pipe trench m
3
0.00 0.00
drains)
SABS 1200DB.8.3.2b Extra over pipe trench excavations for:
3 SABS 1200DB.8.3.2b.1 Intermediate excavation m
3
11.58 0.00
SABS 1200LB. BEDDING (PIPES)
SABS 1200LB.8.2.1 Provision of bedding from excavations:
4 SABS 1200LB.8.2.1b Selected fill material (Blanket) m
3
81.54 0.00
Balance c/f R 0.00
Page 42 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200LB.8.2.2 Provision of bedding from commercial
sources:
5 Selected G5 granular material (Cradle) m
3
0.00 0.00
stabilized with 3% (by volume) Ordinary
Portland Cement, including mechanical
modification and compacting to 95% Mod.
AASHTO maximum density (sub-soil drain).
6 Selected stone material with aggregate size m
3
134.53 0.00
50 to 75mm nominal diameter (Blanket)
SABS 1200LD. CONCRETE PIPE
SABS 1200LD.8.2.1 Supply, handle and lay Class 50D spigot
and socket concrete pipes complete with
rubber ring joints on Class B bedding:
Supply, handle and lay Class 50D Intelocking
joints concrete pipes complete on Class B
bedding:
7 450mm Diameter pipe. m 193.00 0.00
SABS 1200LD.8.2.1 Supply, handle and lay uPVC slotted,
flexible sewer and waste piping, including
joints, fittings, etc. (refer drawing 0.54/390
sheet 12B):
8 160mm Diameter pipe. m 303.00 0.00
9 Extra over 160mm diameter uPVC slotted No 9.00 0.00
pipe for stopped end.
Manholes:
Brick manhole size 940 x 940mm internally,
as detailed on complete with concrete slab
over, step irons, concrete benching and base,
excavations, backfilling, carting away of
surplus excavated material, etc., SABS 558
Type 4 medium duty manhole cover and
frame :
10 Manhole with inlets for 2 no. x 160mm uPVC pipes No 3.00 0.00
and 1 no. x 450mm concrete pipes (elsewhere
measured), depth to invert exceeding 1m and not
exceeding 1,5m deep.
11 Manhole with inlets for 2 no. x 160mm uPVC pipes No 7.00 0.00
and 2 no. x 450mm concrete pipes (elsewhere
measured), depth to invert exceeding 1m and not
exceeding 1,5m deep.
12 Manhole with inlets for 2 no. x 450mm uPVC pipes No 0.00 0.00
concrete pipes (elsewhere measured)
depth to invert exceeding 1m and not exceeding
1,5m deep.
Balance c/f R 0.00
Page 43 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
THE FOLLOWING IN CONCRETE
HEADWALL x 2
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.1.1 Clear and strip 150mm site, including in confined m
2
0.00 0.00
areas and remove
SABS 1200D.8.3.2 Bulk excavation:
13
SABS 1200D.8.3.2a Excavate for reduced levels in all materials, m
3
0.00 0.00
to form recess for 'stilling basin' and dispose.
SABS 1200D.8.3.2b Extra over for :
14
SABS 1200D.8.3.2b.1 Intermediate excavation.
m
3
0.00
0.00
SABS 1200D.8.3.3 Restricted excavation:
15
SABS 1200D.8.3.3a Excavate for reduced levels to form recess m
3
0.00 0.00
for headwall and drainage outlet, including
for footing at front of apron slab, and dispose
to a site provided by the Contractor.
Balance c/f R 0.00
Page 44 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200D.8.3.3b Extra over for :
16
SABS 1200D.8.3.3b.1 Intermediate excavation.
m
3
0.00
0.00
SABS 1200D.8.3.9 Backfilling:
17 Backfilling in restricted areas behind concrete m
3
0.00 0.00
headwalls, etc., with material from
commercial sources, in layers of 150mm
thick, compacted to a minimum of 90%
Mod. AASHTO maximum density.
SABS 1200D.8.3.15 Supply and lay weedkiller:
18 Supply and lay approved weedkiller in strict m2 0.00 0.00
accordance with the Manufacturer's
instructions.
SABS 1200G. CONCRETE (STRUCTURAL)
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.1 Rough formwork to :
19 Sides of walls. m2 0.00 0.00
SABS 1200G.8.2.2 Smooth formwork to :
20 Sides of walls m2 0.00 0.00
SABS 1200G.8.2.4 Special off-form :
21 Form rounded edge to 3mm radius along m 0.00 0.00
exposed top edge of concrete wall.
SABS 1200G.8.2.5 Narrow widths :
22 Not exceeding 300mm high or wide. m 0.00 0.00
23 Not exceeding 300mm high or wide, to m 0.00 0.00
approximately 30 degree batter or slope.
SABS 1200G.8.2.6 Box out holes / form voids :
24 Box out to form circular hole to suit No 0.00 0.00
300mm diameter precast concrete pipe
(elsewhere measured) in 200mm thick
concrete wall.
Balance c/f R 0.00
Balance b/f R 0.00
25 Box out to form circular hole to suit No 0.00 0.00
450mm diameter precast concrete pipe
(elsewhere measured) in 200mm thick
concrete wall.
SABS 1200G.8.3 REINFORCEMENT
SABS 1200G.8.3.2 Mesh Reinforcement :
26 High tensile welded mesh reference 311
m
2
0.00 0.00
to apron slab and walls.
SABS 1200G.8.4 CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/ 19mm concrete:
27 50mm Minimum thick. m
3
0.00 0.00
SABS 1200G.8.4.3 Strength concrete 25MPa/19mm in :
28 Apron slab, walls, splitter blocks and m
3
0.00 0.00
thickening for footing, etc.
SABS 1200G.8.4.4 Unformed surface finish :
29
SABS 1200G.8.4.4a Wood floated finish to falls or slope,
m
2
0.00 0.00
including to confined areas.
TOTAL - carried forward to section SUMMARY R 0.00
Page 45 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 46 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 47 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 48 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 49 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 50 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 51 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 52 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 53 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 54 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 55 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 56 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 5
TRANSFORMER PLINTHS
(2 x 250 MVA)
THE FOLLOWING IN TRANSFORMER
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.3 Restricted excavation in all materials and
dispose to a site provided by the Contractor:
1 SABS 1200D.8.3.3a Strip footings. m
3
32.00 0.00
2 SABS 1200D.8.3.3a Cable trenches. m
3
2.35 0.00
3 SABS 1200D.8.3.3a Sumps. m
3
5.85 0.00
4 Plinth and surrounding m3 53.13
SABS 1200D.8.3.3b Extra over for:
5 SABS 1200D.8.3.3b.1 Intermediate excavation. m
3
18.67 0.00
SABS 1200D.8.3.4 Importation of materials from commercial
sources:
6 SABS 1200D.8.3.4a Selected fill material compacted in 150mm m
3
0.00 0.00
thick layers under surface beds, slabs, etc.,
stabilized with 3% (by volume) Ordinary
Portland Cement, including mechanical
modification and compacting to 95% Mod.
AASHTO maximum density
SABS 1200D.8.3.9 Backfilling:
7 Backfilling in restricted areas to strip m
3
9.84 0.00
footings (elsewhere measured) with
selected fill material from commercial
sources in 150mm thick layers,
compacted to a minimum of 93% Mod.
AASHTO maximum density.
Balance c/f R 0.00
Page 72 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200G. CONCRETE [STRUCTURAL]
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.1 Rough formwork to:
8 Trench walls. m
2
40.33 0.00
SABS 1200G.8.2.2 Smooth formwork to:
9 Plinths and platforms. m
2
26.39 0.00
10 SABS 1200G.8.2.4 Sump walls. m
2
23.40 0.00
Cable walls m
2
9.40
11 Form 25 x 25mm chamfer along exposed m 9.68 0.00
top edges of concrete.
SABS 1200G.8.2.5 Narrow widths:
12 Not exceeding 300mm high or wide. m 3.00 0.00
SABS 1200G.8.2.6 Box out holes / Form voids:
13 Form 600 x 600 x 600mm deep pocket in No 2.00 0.00
top surface of concrete surface bed for
removeable fence post (elsewhere
measured).
14 Form hole 300mm diameter through 100 No 2.00 0.00
to 150mm concrete wall for precast
concrete pipe (elsewhere measured).
SABS 1200G.8.3 REINFORCEMENT
15 Type reference 245 to plinth and surface m
2
370.66 0.00
beds.
SABS 1200G.8.4 CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/19mm concrete:
16 50mm Minimum thick. m
3
13.27 0.00
Balance c/f R 0.00
Page 73 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200G.8.4.3 Strength concrete 25MPa/19mm in:
17 Surface beds. m3 14.72 0.00
Strip footing concrete m3 14.72
18 Bottom and sides of trenches sumps m3 3.51 0.00
19 Transformer plinth m3 56.58 0.00
20 Benching to sump. m3 0.29 0.00
Cable trench m3 2.12
Offloading bay m3 13.50
SABS 1200G.8.4.4 Unformed surface finishes:
21 SABS 1200G.8.4.4a Wood floated finish, including in confined m2 185.33 0.00
areas.
SABS 1200G.8.5 JOINTS
22 'Construction joint' through 600mm thick m 0.00 0.00
concrete including dowels, saw-cut,
bond-breaker, silicone sealant, etc.,
complete, all as detailed on drawing
0.54/390 sheet 38a1.
Sundries:
23 Junction box foundation complete No 2.00 0.00
including all excavations, backfilling, concrete,
holding down bolts, etc.
24 Plug box foundation complete as per detail No 2.00 0.00
including all excavations, backfilling,
concrete, holding down bolts, etc.
Screeds:
25 Cement mortar 1:3 screed average 30mm m2 99.68 0.00
thick, to falls.
Balance c/f R 0.00
Page 74 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200H. FLOORING, COMPLETE AND INSTALLED
WITH FRAMES
26 Oil holidng dam, including all excavations, No 1.00 0.00
backfilling, concrete, brickwork, covers,
drainpipes, etc., complete as per drawing
0.54/5664 and 0.54/6084
BRICKWORK
Face brickwork of face bricks (14MPa
nominal compressive strength
delivered to site) including brick force and
add for taking delivery, laying, bedding and
pointing, storage, waste and profit:
27 Face brick Bundwall 230mm wide with m2 37.26 0.00
maximum height 500mm high with roller
course on top of wall, including facing
and pointing both sides.
28 Straight joint through bund wall 230mm No 8.00 0.00
wide x 375mm high.
29 Slot 450x450mm through 230mm wide No 2.00 0.00
brick bundwall
Balance c/f R 0.00
Page 75 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
THE FOLLOWING IN STAINLESS STEEL
FIRE BARRIER AROUND TRANSFORMER
PLINTH
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.3 Restricted Excavation:
30 SABS 1200D.8.3.3a Excavate for bases in all materials and m3 3.00 0.00
dispose to a registered spoil site, provided
by the Contractor
31 Excavate for bases in all materials and m3 32.00 0.00
stockpile / set aside for later re-use
(includes over-excavation under bases)
SABS 1200D.8.3.3b Extra over for:
32 SABS 1200D.8.3.3b.1 Intermediate excavation. m3 5.00 0.00
33 SABS 1200D.8.3.3b.2 Hard rock excavation. m3 2.50 0.00
Balance c/f R 0.00
Page 76 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200D.8.3.9 Backfilling:
34 Backfilling to excavations, to receive concrete m3 28.80 0.00
bases (elsewhere measured), using selected
previously stockpiled / set aside material,
compacted in 150mm thick layers,
stabilized with 15% (by volume) Ordinary
Portland Cement, including mechanical
modification and compacting to 100% Mod.
AASHTO maximum density
35 Backfilling to excavations, to receive concrete m3 3.00 0.00
bases (elsewhere measured), using selected
fill material from commercial sources,
compacted in 150mm thick layers,
stabilized with 3% (by volume) Ordinary
Portland Cement, including mechanical
modification and compacting to 93% Mod.
AASHTO maximum density
36 Backfilling in restricted areas around base, m3 10.00 0.00
stub column and to battered slopes, using
selected previously stockpiled / set aside
material, compacted in 150mm thick layers,
to 100% Mod. AASHTO maximum density.
SABS 1200G. CONCRETE (STRUCTURAL)
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.2 Smooth:
37 Sides of base, stub columns. m2 105.60 0.00
SABS 1200G.8.2.4 Special off-form:
38 Form 20 x 20mm chamfer along exposed m 96.00 0.00
top edges of concrete stub column, etc.
SABS 1200G.8.2.6 Box out holes / form voids:
39 Box in to form 80 x 80 x 350mm deep No 20.00 0.00
pocket in top surface of concrete stub
column.
Balance c/f R 0.00
Page 77 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200G.8.3 REINFORCEMENT
SABS 1200G.8.3.1 Mild steel reinforcement bars:
40 10mm Diameter. kg 176.00 0.00
SABS 1200G.8.3.1 High Tensile steel reinforcement bars:
41 10mm Diameter. kg 284.40 0.00
SABS 1200G.8.4 CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/ 19mm concrete:
42 50mm Minimum thick. m3 1.44 0.00
SABS 1200G.8.4.3 Strength concrete 30MPa/19mm in:
43 Bases and stub columns. m3 38.88 0.00
SABS 1200G.8.4.4 Unformed surface finishes:
44 SABS 1200G.8.4.4a Wood floated finish to top surface of bases, m2 28.80 0.00
including working in confined areas.
SABS 1200G.8.7 GROUTING
SABS 1200G.8.7a Under bases:
45 Non-shrink, non-metallic, free-flowing 30MPa m3 1.44 0.00
grouting under base plates.
SABS 1200G.8.7b Holding Down bolts:
46 Non-shrink grouting in holding bolt m3 1.44 0.00
pockets.
Balance c/f R 0.00
Page 78 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200G.8.8 HOLDING DOWN BOLTS AND
MISCELLANEOUS
47 Provide and install Grade 4.8 M24 x 460mm kg 184.20 0.00
long galvanized mild steel bolt with 75mm
length threaded at exposed end and fitted
with suitable nut and washer, and with 80 x
80 x 14mm thick anchor plate welded on at
other end, bolt cast 350mm deep into
concrete stub column base in exact
position
SABS 1200HB. CLADDING AND SHEETING
SABS 1200HB.8.2.2 Stainless steel firewalls:
48 Supply, deliver and install 6m high stainless kg 7,624.62 0.00
steel fire wall, including hot-dipped galvanized
mild steel support posts, IBR profile sheeting,
fixing brackets, purlins, cleats, bolts, etc.,
complete, including offsets or changes in
direction along length (In no. 5 'Module A'
type panels, measured along straight length)
TOTAL - carried forward to section SUMMARY R 0.00
Page 79 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 5
GENERAL TRANSFORMER
(2 x Plinths)
THE FOLLOWING IN TRANSFORMER
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.3 Restricted excavation in all materials and
dispose to a site provided by the Contractor:
1 SABS 1200D.8.3.3a Strip footings. m
3
19.23
2 SABS 1200D.8.3.3a Cable trenches. m
3
0.75
3 SABS 1200D.8.3.3a Sumps. m
3
3.62
4 Plinth and surrounding m3 24.16
SABS 1200D.8.3.3b Extra over for:
SABS 1200D.8.3.9 Backfilling:
5 Backfilling in restricted areas to strip m
3
9.13
footings (elsewhere measured) with
selected fill material from commercial
sources in 150mm thick layers,
compacted to a minimum of 93% Mod.
AASHTO maximum density.
Balance c/f R
Balance b/f R
SABS 1200G. CONCRETE [STRUCTURAL]
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.1 Rough formwork to:
6 Trench walls.
m
2
12.15
SABS 1200G.8.2.2 Smooth formwork to:
7 Plinths and platforms.
m
2
25.00
8 SABS 1200G.8.2.4 Sump walls.
m
2
14.46
Cable walls
m
2
3.00
9 Form 25 x 25mm chamfer along exposed m 2.93
top edges of concrete.
SABS 1200G.8.2.5 Narrow widths:
10 Not exceeding 300mm high or wide. m 2.00
SABS 1200G.8.2.6 Box out holes / Form voids:
11 Form 500 x 500 x 450mm deep pocket in No 2.00
top surface of concrete surface bed for
removeable fence post (elsewhere
measured).
12 Form hole 300mm diameter through 100 No 2.00
to 150mm concrete wall for precast
concrete pipe (elsewhere measured).
SABS 1200G.8.3 REINFORCEMENT
13 Type reference 245 to plinth and surface
m
2
80.50
beds.
SABS 1200G.8.4 CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/19mm concrete:
14 50mm Minimum thick.
m
3
3.48
Balance c/f R
Balance b/f R
SABS 1200G.8.4.3 Strength concrete 25MPa/19mm in:
15 Surface beds. m3 4.52
16 Bottom and sides of trenches sumps m3 8.87
17 Transformer plinth m3 22.50
18 Benching to sump. m3 1.00
SABS 1200G.8.4.4 Unformed surface finishes:
19 SABS 1200G.8.4.4a Wood floated finish, including in confined m2 86.00
areas.
SABS 1200G.8.5 JOINTS
20 'Construction joint' through 600mm thick m 47.00
concrete including dowels, saw-cut,
bond-breaker, silicone sealant, etc.,
complete, all as detailed on drawing
0.54/390 sheet 38a1.
Sundries:
21 Junction box foundation complete No 2.00
including all excavations, backfilling, concrete,
holding down bolts, etc.
22 Plug box foundation complete as per detail No 2.00
including all excavations, backfilling,
concrete, holding down bolts, etc.
Screeds:
23 Cement mortar 1:3 screed average 30mm m2 30.51
thick, to falls.
BRICKWORK
Face brickwork of face bricks (14MPa
nominal compressive strength
delivered to site) including brick force and
add for taking delivery, laying, bedding and
pointing, storage, waste and profit:
24 Face brick Bundwall 230mm wide with m2 22.44
maximum height 500mm high with roller
course on top of wall, including facing
and pointing both sides.
25 Straight joint through bund wall 230mm No 0.00
wide x 375mm high.
26 Slot 450x450mm through 230mm wide No 0.00
brick bundwall
Balance c/f R
Balance b/f R
THE FOLLOWING IN STAINLESS STEEL
FIRE BARRIER AROUND TRANSFORMER
PLINTH
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.3 Restricted Excavation:
27 SABS 1200D.8.3.3a Excavate for bases in all materials and m3 3.00
dispose to a registered spoil site, provided
by the Contractor
28 Excavate for bases in all materials and m3 32.00
stockpile / set aside for later re-use
(includes over-excavation under bases)
SABS 1200D.8.3.3b Extra over for:
29 SABS 1200D.8.3.3b.1 Intermediate excavation. m3 5.00
30 SABS 1200D.8.3.3b.2 Hard rock excavation. m3 2.50
SABS 1200D.8.3.9 Backfilling:
31 Backfilling to excavations, to receive concrete m3 28.80
bases (elsewhere measured), using selected
previously stockpiled / set aside material,
compacted in 150mm thick layers,
stabilized with 15% (by volume) Ordinary
Portland Cement, including mechanical
modification and compacting to 100% Mod.
AASHTO maximum density
32 Backfilling to excavations, to receive concrete m3 3.00
bases (elsewhere measured), using selected
fill material from commercial sources,
compacted in 150mm thick layers,
stabilized with 3% (by volume) Ordinary
Portland Cement, including mechanical
modification and compacting to 93% Mod.
AASHTO maximum density
33 Backfilling in restricted areas around base, m3 10.00
stub column and to battered slopes, using
selected previously stockpiled / set aside
material, compacted in 150mm thick layers,
to 100% Mod. AASHTO maximum density.
Balance c/f R
Balance b/f R
SABS 1200G. CONCRETE (STRUCTURAL)
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.2 Smooth:
34 Sides of base, stub columns. m2 105.60
SABS 1200G.8.2.4 Special off-form:
35 Form 20 x 20mm chamfer along exposed m 96.00
top edges of concrete stub column, etc.
SABS 1200G.8.2.6 Box out holes / form voids:
36 Box in to form 80 x 80 x 350mm deep No 20.00
pocket in top surface of concrete stub
column.
SABS 1200G.8.3 REINFORCEMENT
SABS 1200G.8.3.1 Mild steel reinforcement bars:
37 10mm Diameter. kg 176.00
SABS 1200G.8.3.1 High Tensile steel reinforcement bars:
38 10mm Diameter. kg 284.40
SABS 1200G.8.4 CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/ 19mm concrete:
39 50mm Minimum thick. m3 1.44
SABS 1200G.8.4.3 Strength concrete 30MPa/19mm in:
40 Bases and stub columns. m3 38.88
SABS 1200G.8.4.4 Unformed surface finishes:
41 SABS 1200G.8.4.4a Wood floated finish to top surface of bases, m2 28.80
including working in confined areas.
Balance c/f R
Balance b/f R
SABS 1200G.8.7 GROUTING
SABS 1200G.8.7a Under bases:
42 Non-shrink, non-metallic, free-flowing 30MPa m3 1.44
grouting under base plates.
SABS 1200G.8.7b Holding Down bolts:
43 Non-shrink grouting in holding bolt m3 1.44
pockets.
SABS 1200G.8.8 HOLDING DOWN BOLTS AND
MISCELLANEOUS
44 Provide and install Grade 4.8 M24 x 460mm kg 184.20
long galvanized mild steel bolt with 75mm
length threaded at exposed end and fitted
with suitable nut and washer, and with 80 x
80 x 14mm thick anchor plate welded on at
other end, bolt cast 350mm deep into
concrete stub column base in exact
position
SABS 1200HB. CLADDING AND SHEETING
SABS 1200HB.8.2.2 Stainless steel firewalls:
45 Supply, deliver and install 6m high stainless kg 7,624.62
steel fire wall, including hot-dipped galvanized
mild steel support posts, IBR profile sheeting,
fixing brackets, purlins, cleats, bolts, etc.,
complete, including offsets or changes in
direction along length (In no. 5 'Module A'
type panels, measured along straight length)
TOTAL - carried forward to section SUMMARY R
AMOUNT
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 - BILL NO. 6
CABLE TRENCHES, DUCTS, JUNCTIONS
THE FOLLOWING IN CABLE TRENCHES,
DUCTS & JUNCTIONS
Construct complete unit as specified and
including excavation in all material, working
space, risk of collapse, regular dewatering,
concrete, formwork, reinforcement,
imported backfill and disposal. Cable
trenches with bends and junctions complete
with concrete covers must be fitted,
marked for positions and placed next
to trenches for later installation by others.
1 Single trench (600mm wide) m 180.00 0.00
2 Single trench (900mm wide) m 70.00 0.00
Culvert road crossing (road measured
elsewhere):
3 600x900mm Wide precast cable duct 5m No 2.00 0.00
long, including cable racking, excavation,
backfilling, etc. complete
4 Three trench entrance to control building, No 2.00 0.00
including manhole, racking, excavation,
backfilling, brickwork, etc. complete

SUNDRIES
5 Cast in-situ concrete cover, size 300mm No 10.00 0.00
wide x 740mm long x 100mm thick overall,
including smooth formwork to sides and
soffit, all necessary reinforcement and
'vastrap' pattern to top surface of concrete
cover, all in accordance with Drawing
6 Cast in-situ concrete cover, size 300mm No 10.00 0.00
wide x 1040mm long x 100mm thick overall,
including smooth formwork to sides and
soffit, all necessary reinforcement and
'vastrap' pattern to top surface of concrete
cover, all in accordance with Drawing
TOTAL - carried forward to section SUMMARY R 0.00
Page 97 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO.7
LIGHT MASTS AND FOUNDATIONS
(2 x 24m)
SABS 1200D. EARTHWORKS
SABS 1200D.8.3.3 Restricted Excavation:
1 SABS 1200D.8.3.3a Excavate for bases in all materials and m3 42.03 0.00
dispose to a site provided by the Contractor
(excludes over-excavation)
SABS 1200D.8.3.3b Extra over for:
2 SABS 1200D.8.3.3b.1 Intermediate excavation. m3 4.20 0.00
SABS 1200D.8.3.9 Backfilling:
3 Backfilling in restricted areas around base, m3 42.03 0.00
stub column and to battered slopes, with
selected fill material from commercial
sources in 150mm thick layers,
including mechanical modification and
compacting to 95% Mod. AASHTO maximum
density.
Cart away:
4 Cart away material arising from excavations m3 16.34
to a location located by contractor
Balance c/f R 0.00
Page 102 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200DB. EARTHWORKS (PIPE TRENCHES)
SABS 1200G. CONCRETE (STRUCTURAL)
SABS 1200G.8.2 FORMWORK
SABS 1200G.8.2.2 Smooth:
4 Sides of bases, stub columns. m2 1.08 0.00
Rough:
Sides of bases, stub columns. m2 18.00
SABS 1200G.8.2.4 Special off-form:
5 Form 20 x 20mm chamfer along top edge m 7.20 0.00
of exposed stub column.
SABS 1200G.8.3 REINFORCEMENT
SABS 1200G.8.3.1 Reinforcement bars:
6 Various diameter bars kg 57.76 0.00
SABS 1200G.8.4 CONCRETE
SABS 1200G.8.4.2 Blinding layer in 15MPa/19mm concrete:
8 50mm Minimum thick. m3 1.68 0.00
SABS 1200G.8.4.3 Strength concrete, 30MPa/19mm with
'Pro-Struct 539' integral waterproofer added
at the rate of 1,5 litres per 50kg cement in:
9 Bases and stub columns. m3 16.59 0.00
Balance c/f R 0.00
Page 103 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200G.8.4.4 Unformed surface finishes:
10 SABS 1200G.8.4.4a Wood floated finish to top surface of bases, m2 1.62 0.00
including working in confined areas.
SABS 1200G.8.7 GROUTING
SABS 1200G.8.7a Under bases:
11 Non-shrink, non-metallic, free-flowing m3 0.08 0.00
35MPa grouting under base plates
SABS 1200G.8.8 HOLDING DOWN BOLTS AND
MISCELLANEOUS
12 Provide and install Grade 4.8 M36x 1300mm kg 172.80 0.00
long galvanised mild steel bolt with 120mm
length threaded at exposed end and fitted
with suitable nut and washer, and with 120
x 120 x 14mm thick anchor plate welded on
at other end, bolt cast into concrete stub
column base in exact position
Cable sleeves:
13 50mm Diameter x 700mm long uPVC No 4.00 0.00
sleeve cast in exact position in concrete
stub column.
One layer of 250 micron 'Plastall Gundle
USB Green' waterproof sheeting sealed at
laps with 'Gunplas Pressure Sensitive
Tape':
14 Under blinding. m2 33.62 0.00
TOTAL - carried forward to section SUMMARY R 0.00
Page 104 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 8
SUPPORT STEEL
Notes to Tenderers:
The Tenderer is to allow in the pricing of
structural steelwork for all steelwork to be
erected plumb and to include for ALL
necessary steel packing pieces to achieve
same.
SABS 1200H. STRUCTURAL STEELWORK
SABS 1200H.8.3.1.1 Preparation of shop detail drawings:
Prepare and submit to the Engineer
acceptable shop detail drawings and
supporting calculations in terms of the
project specification.
SABS 1200H.8.3.1.2 Supply and fabrication of steelwork:
Steelwork to be hot dipped galvanized
Grade 300W, as per the standard
specification, complete with all the
necessary cleats, brackets, gussets, packs,
shop fasteners baseplates and the like,
including cleaning of steelwork, shop
priming and loading ready for dispatch to
site and preparation of shop detail
drawings including delivery and off-loading on site
and erection of stell on site:
1 Structural steelwork kg 107724 0.00
2 Various "M" bolts kg 5446.4 0.00
TOTAL - carried forward to section SUMMARY R 0.00
Page 113 Civil Works
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 9
SECURITY FENCING AND WALLING,
INCLUDING SECURITY LIGHTING
Note : All galvanized bolts to include for
re-threading
Supply, deliver and install new 1,83m high
galvanized diamond mesh 'safety fence'
complete
1 1,83m High galvanised wire fence, m 3000 0.00
comprising 64mm x 64mm x 2,5mm
diameter diamond mesh supported on and
including 3 no. x 4mm diameter horizontal
straining wires, mesh strained with 10mm
diameter galvanized hook bolts, straining
wires strained with 100mm long x 10mm
diameter straining bolts, including all
necessary hot dipped galvanised steel
angle section, corner, intermediate, gate
posts and stays, base plates, etc., casting
posts in and including 20MPa/19mm
concrete bases (refer detail on drawings),
including excavation, backfilling and
disposing of surplus excavated material,
concrete, formwork, etc., all as per required
layout (no overhang required):
2 Extra over 1,83m high fencing for 90 degree No 12 0.00
bend.
3 Extra over 1,83m high fencing for end. No 12 0.00
4 Extra over 1,83m high fencing for intersection No 12 0.00
with fencing.
5 Extra over 1,83m high fencing for 995mm No 3 0.00
wide single-leaf Pedestrian gate
including 40mm diameter hot dipped
galvanized steel tube framing, diamond
mesh covering bound on with 2,5mm
diameter galvanized wire, locking
mechanism 3 no. hinges, etc complete
Balance c/f R 0.00
Page 115 Civil Works
SECTION NO 2
Balance b/f R 0.00
6 Extra over 1,83m high fencing for 5m wide No 3 0.00
double-leaf Vehicular access gate
including 40mm diameter hot dipped
galvanized steel tube framing and cross
bracing, diamond mesh covering bound on
with 2,5mm diameter galvanized wire,
460mm long x 8mm diameter chain link
welded on 3 no. hinges per leaf, 280mm long
tower bolt and 100mm long x 20mm
diameter steel slot cast flush in top surface
of concrete, etc complete
TOTAL - carried forward to section SUMMARY R 0.00
Page 116 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 10
WATER SUPPLY PIPING, INCLUDING
SABS 1200DB. EARTHWORKS (PIPE TRENCHES)
SABS 1200DB.8.3.2a Excavate in all materials for trenches and
use for backfill, compact and dispose of
surplus material:
1 Depth not exceeding 1m deep m3 9 0.00
SABS 1200DB.8.3.2b Extra over pipe excavation for:
2 SABS 1200DB.8.3.2b.1 Intermediate excavation. m3 2 0.00
3 SABS 1200DB.8.3.2b.2 Hard rock excavation. m3 2 0.00
SABS 1200LB. BEDDING (PIPES)
SABS 1200LB.8.2.2 Provision of bedding from commercial
sources:
4 SABS 1200LB.8.2.2.1a Selected granular material (Cradle). m3 0.00 0.00
5 SABS 1200LB.8.2.2.1b Selected fill material (Blanket). m3 5.00 0.00
SABS 1200L. MEDIUM PRESSURE PIPELINES
SABS 1200L.8.2.1 Supply, handle and lay Type IV, Class 6 HDPE
water supply piping, including joints, fittings,
etc.:
6 25mm Diameter pipe. m 12 0.00
7 50mm Diameter pipe. m 3 0.00
Balance c/f R 0.00
Page 127 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200L.8.2.2 Extra over 8.2.1 for the supplying, laying and
bedding of specials, complete with couplings:
8 25mm Bend No 3 0.00
9 25mm Tee piece No 2 0.00
10 50mm Bend No 2 0.00
11 50mm Tee piece No 2 0.00
SABS 1200L.8.2.3 Extra over 8.2.1 for supplying, fixing and
bedding of valves:
12 25mm Diameter isolating valve. No 1 0.00
13 50mm Diameter isolating valve. No 1 0.00
SABS 1200L.8.2.11 Anchor / Thrust blocks:
14 SABS 1200L.8.2.11b 20MPa/19mm concrete in anchor block. m3 1 0.00
15 Rough formwork to concrete. m2 1 0.00
SABS 1200L.8.2.12 Concrete casing:
16 20MPa/19mm concrete in encasing of m3 1 0.00
25mm diameter HDPE pipe.
17 20MPa/19mm concrete in encasing of m3 0 0.00
50mm diameter HDPE pipe.
SABS 1200L.8.2.13 Valve and hydrant chambers, etc.:
18 Brick walled valve chamber size 450 x 450 No 0 0.00
x 500mm deep internally, including
excavations, backfilling, carting away
surplus excavated material, concrete base
and benching, concrete slab over and 450 x
450mm hinged cast iron cover with a mass
of 11kg, etc., complete.
Balance c/f R 0.00
Page 128 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SABS 1200LF. WATER TANK
19
SABS 1200LF.8.2.1
4500 Litre barrel type asbestos cement or PVC
type water tank to for approval, securely mounted
with copper straps and u-shaped holding down
bolts
No 1 0.00
WATER TANK SUPPORT STRUCTURE
20 Steelwork to be hot dipped galvanized Grade
300W, as per the standard specification, complete
with all the necessary cleats, brackets, gussets,
packs, shop fasteners, baseplates, connection
plates, anchor plates, holes, bolts, welding, etc.,
including cleaning of steelwork, shop priming and
loading ready for dispatch to site and fixing on in
position on site
No. 1 0.00
21 d) Supply 25mm isolating valve at the pump. No 2 0.00
22 Supply and install water supply meter to suit No 1 0.00
50mm diameter HDPE pipe complete.
SABS 1200LF.8.2.6 Supply and install stop taps complete with
special fittings:
23 20mm Chrome plated hose bibtap, complete No 8 0.00
with 20mm hose union, 1,0m long x 22mm
diameter galvanized mild steel standpipe,
jointing to Class 6 HDPE pipe (elsewhere
measured), etc., complete.
SABS 1200LF.8.2.8 Markings or marker posts:
24 1,0m High precast concrete marker pole, No 10 0.00
painted yellow, fixed firmly into ground.
BOREHOLE
25 Provide the amount of R 10 000.00 ( Ten Item 1 0.00
Thousand Rands) for testing, locating
and sinking of borehole, to enable constant water
water supply on site, as required by the
Project Manager, including pump and
suitable water purification system.
26 Allow for profit on above item. Item 1 0.00
27 Allow for attendance on above item. Item 1 0.00
TOTAL - carried forward to section SUMMARY R 0.00
Page 129 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 130 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 131 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 132 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 133 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 134 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 135 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Page 136 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 2
CIVIL WORKS
SECTION 2 : BILL NO. 11
SEWERS, INCLUDING SEPTIC TANK
SABS 1200DB. EARTHWORKS (PIPE TRENCHES)
SABS 1200DB.8.3.2a Excavate in all materials for trenches and
use for backfill, compact and dispose of
surplus material:
1 Depth not exceeding 1m deep m3 7.2 0.00
SABS 1200DB.8.3.2b Extra over pipe excavation for:
2 SABS 1200DB.8.3.2b.1 Intermediate excavation. m3 1 0.00
3 SABS 1200DB.8.3.2b.2 Hard rock excavation. m3 1 0.00
SABS 1200LB. BEDDING (PIPES)
SABS 1200LB.8.2.1 Provision of bedding from excavations:
4 SABS 1200LB.8.2.1a Selected granular material (Cradle). m3 1 0.00
5 SABS 1200LB.8.2.1b Selected fill material (Blanket). m3 2 0.00
SABS 1200LB.8.2.2 Provision of bedding from commercial
sources:
6 SABS 1200LB.8.2.2.1a Selected granular material (Cradle). m3 1 0.00
7 SABS 1200LB.8.2.2.1b Selected fill material (Blanket). m3 4 0.00
SABS 1200LD. SEWERS
SABS 1200LD.8.2.1 Supply, handle and lay Class 12 uPVC
sewer and waste piping, including joints,
fittings, etc.:
8 50mm Diameter pipe. m 0 0.00
9 110mm Diameter pipe. m 7.2 0.00
Balance c/f R 0.00
Page 139 Civil Works
PAY REFERENCE DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
Manholes:
SABS 1200LD.8.2.3 Brick manhole size 940 x 940mm internally,
as detailed on drawing 0.54/390 sheet 1,
complete with concrete slab over, step
irons, concrete benching and base,
excavations, backfilling, carting away of
surplus excavated material, etc., SABS 558
Type 4 medium duty manhole cover and
frame:
10 Manhole with inlets for 2 no. x 160mm No 0 0.00
diameter uPVC pipes (pipes elsewhere
measured), depth to invert not exceeding 1m.
11 Extra over manhole for variation in depth of m 0 0.00
manhole from standard depth.
Encasing of pipes in concrete:
12 SABS 1200LD.8.2.7 20MPa/19mm concrete in encasing of m3 0 0.00
160mm diameter uPVC pipe, including
formwork, etc.
Sundries:
SABS 1200LD.8.2.13 Septic tank complete with covers and
frames, etc.:
13 Calcamite bio-mite sewer treatment plant, No 0.00
comprising septic tank chamber, size 5m
long x 2m wide x 2m deep overall, inlets for
2 no. x 110mm diameter and outlet for 1 no.
x 50mm diameter uPVC pipes (pipes
elsewhere measured), including 1500 litre
calcamite biological reactor plant, pumping
chamber / chlorinator, blower, all associated
electrical supply, excavations, bedding with
selected imported material, backfilling and
compacting with selected excavated
material, carting away of surplus excavated
material, etc., complete
TOTAL - carried forward to section SUMMARY R 0.00
Page 140 Civil Works
Vuyani Substation
SECTION NO 2
CIVIL WORKS
SECTION SUMMARY
Bill No. Description Amount
1 Bulk Earthworks, Landscaping, etc. 0.00
2 Access and Terrace Roads 0.00
3 Base Foundations to 132kV Yard 0.00
4 Drainage 0.00
5 Transformer Plinths (In No. 2) 0.00
6 General Transformer (In No.2) 0.00
7 Cable Trenches, Ducts, Junctions and Ramps 0.00
8 Light Masts and Foundations 0.00
9 Support Steel 0.00
10 Security Fencing and Walling, including Security Lighting 0.00
11 Water Supply Piping, including Storage Tank 0.00
12 Sewers, including Septic Tank 0.00
TOTAL - carried forward to FINAL SUMMARY R 0.00
Page 143 Summary : Civils
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
SECTION NO 3
BUILDING WORKS
SECTION 3 : BILL NO. 1
CONTROL BUILDING (33 KV YARD)
EARTHWORKS (PROVISIONAL)
SUPPLEMENTARY PREAMBLES
Descriptions of carting away of excavated material shall be
deemed to include loading excavated material onto trucks
directly from the excavations or, alternatively, from stock piles
situated on the building site
EXCAVATION, FILLING, ETC.
Excavation in earth not exceeding 2m deep:
1 Reduced levels under floors m3 0.00
2 Trenches m3 0.00
3 For holes (columns) m3 0.00
Extra over trench and hole excavations in earth for
excavation in:
4 Soft rock m3 0.00
5 Hard rock m3 0.00
Extra over all excavations for carting away to a disposal
site complying with environmental regulations:
6 Surplus material from excavations and/or stock piles on site to m3 0.00
spoil area located by the contractor
Risk of collapse of excavations:
7 Sides of trench and hole excavations not exceeding 1,5m deep m2 0.00
Keeping excavations free of water:
8 Keeping excavations free of water Item 0.00
Earth filling obtained from the excavations:
9 Under floors, steps, pavings, etc and well compacted in layers m3 0.00
not exceeding 150mm thick
10 Backfilling to trenches, holes, etc., and compacted in layers m3 0.00
not exceeding 150mm thick to 95% Mod AASHTO density
Balance c/f R 0.00
Page 144 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f R 0.00
Earth filling obtained from commercial sources:
11 Filling with approved material supplied and carted onto site m3 0.00
by the Contractor, under floors and well compacted in layers
not exceeding 150mm thick
Soil insecticide:
12 Under floors, etc., including forming and poisoning shallow m2 0.00
furrows against foundation walls etc, filling in furrows and
ramming.
13 To bottoms and sides of trenches, etc. m2 0.00
SECTION 3 : BILL NO.1
CONCRETE, FORMWORK AND REINFORCEMENT
SUPPLEMENTARY PREAMBLES
Cost of tests
The costs of making, storing and testing of concrete test cubes
as required under clause 7 "Tests" of SABS 1200 G shall
include the cost of providing cube moulds necessary for the
purpose, for testing costs and for submitting reports on the
tests to the architect. The testing shall be undertaken by an
independent firm or institution nominated by the contractor to
the approval of the architect. (Test cubes are measured
separately)
UNREINFORCED CONCRETE CAST AGAINST
EXCAVATED SURFACES
10MPa/19mm concrete:
14 Blinding to ground beams and m3 0.00
15 Columns m3 0.00
Balance c/f 0.00
Page 145 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
REINFORCED CONCRETE
25MPa/19mm concrete:
16 Trenches m3 0.00
17 Ramps m3 0.00
18 Columns m3 0.00
19 Ring beam m3 0.00
TEST BLOCKS
20 Making and testing 150 x 150 x 150mm concrete strength test No 0.00
cube (Provisional)
ROUGH FORMWORK (DEGREE OF ACCURACY II)
Rough formwork to sides and soffits:
Trenches m2 0.00
Ramp m2 0.00
Columns m2 0.00
SMOOTH FORMWORK (DEGREE OF ACCURACY II)
Smooth formwork to sides:
21 Column m2 0.00
22 Ring beam m2 0.00
REINFORCEMENT
Reinforcement to structural concrete work:
23 All diameter bars Kg 0.00
Balance c/f 0.00
Page 146 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
SECTION 3 : BILL NO.1
MASONRY ( Brickwork )
SUPPLEMENTARY PREAMBLES
BRICKWORK
Sizes in descriptions
Where sizes in descriptions are given in brick units, "one brick"
shall represent the length and "half brick" the width of a brick
Pointing
Descriptions of recessed pointing to fair face brickwork and
face brickwork shall be deemed to include square recessed,
hollow recessed, weathered pointing, etc
FOUNDATIONS (PROVISIONAL)
Brickwork of NFP bricks in class II mortar:
24 450mm solid brick wall m2 0.00
25 300mm Solid brick wall m2 0.00
SUPERSTRUCTURE
Brickwork of NFP bricks in class II mortar:
26 200mm brick walls m2 0.00
BRICKWORK SUNDRIES
Foam filler to firewall:
27 Seal joint between top of one brick wall and roof tiles with m 0.00
approved foam filler to prevent the escape of hydrogen gasses.
Brickwork reinforcement:
28 150mm Wide reinforcement built in horizontally m 0.00
Prestressed fabricated lintels:
29 150 x 150mm Lintels in lengths not exceeding 3m m 0.00
Galvanised hoop iron cramps, ties, etc.:
30 30 x 1,6mm Roof tie 1,5m long with one end fixed to timber No 0.00
and other end built into brickwork
SECTION 3 : BILL NO.1
WATERPROOFING
DAMP-PROOFING OF WALLS AND FLOORS
One layer of 375 micron "Plastall Gundle Brikgrip DPC"
embossed damp proof course:
31 In walls m2 0.00
One layer of 250 micron "Plastall Gundle USB Green"
waterproof sheeting sealed at laps with "Gunplas Pressure
Sensitive Tape":
32 Under surface beds m2 0.00
Balance c/f 0.00
Page 147 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
SECTION 3 : BILL NO. 1
ROOF COVERINGS, ETC.
IBR Sheeting
0.6mm Thick IBR Polythene Roof Sheeting to include head and
side wall flashing, closures, washers and screws. To be fixed and
laid strictly in accordance with the manufacturer's specifications.
Sheeting to be painted per clients required colour
33 Roof covering with not exceeding 50 degrees pitch m2 0.00
34 231 x 154mm fascia flashing. m 0.00
ROOF INSULATION
"Sol-Thermo Loft International Roofmate H/D 250-40mm"
insulation with aluminium foil to underside and plastic to
top :
35 Insulation laid taut over rafters (at approximately 600mm m2 0.00
centres) and fixed concurrent with tiling battens, purlins, etc
SECTION 3 : BILL NO. 1
CARPENTRY AND JOINERY
SUPPLEMENTARY PREAMBLES
Particle board:
Particle board shall comply with the following specifications:
a) SABS 1300 Particle board: exterior and flooring type
b) SABS 1301 Particle board: interior type
Joinery:
Descriptions of frames shall be deemed to include frames,
transomes, mullions, rails, etc
Descriptions of hardwood joinery shall be deemed to include
pelleting of bolt holes
Fixing
Items described as "nailed" shall be deemed to be fixed with
hardened steel nails or shot pins to brickwork or concrete
Balance c/f 0.00
Page 148 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
KEY CABINET
36 Glazed timber framed and backed, key cabinet size 1400mm No 0.00
wide x 1000mm high x 100mm deep mounted to plastered
brick wall, with top of cabinet fixed at 2m above finished floor
level, including all ironmongery, etc., complete
37 0.6 x 1.2 long cupboard formed off 16mm "Bisonlam" white
melamine faced particle board in carcass and shelving with PVC
edging strips to all exposed edges, complete with 18mm doors and
150mm long chrome decorative handles, the top to be 32mm thick
"Formica" in tan leather stone colour with cutout for preparation
bowl
No 0.00
SECTION 3 : BILL NO.1
CEILINGS, PARTITIONS AND ACCESS FLOORING
CEILINGS, ETC.
6,4mm Gypsum plasterboard with H-type pressed steel
jointing strips :
38 Ceilings in 1200mm sheets including 38 x 38mm sawn m2 0.00
softwood brandering at 400mm centres
39 Extra over ceiling for 610 x 610mm trap door of 50 x 76mm No 0.00
wrought softwood rebated framing with one 38 x 38mm sawn
softwood cross brander covered with ceiling board and fitted
flush in opening
Moulded cornices:
40 75mm Gypsum coved cornice m 0.00
ACCESS FLOORING
41 Supply and install access floor system to system approval. m2 0.00
Panels to be 600 x 600mm snap-on stringer system
capable of supporting a design load of 7,2KN/m2. The
panels are to be covered with high pressure 3,2mm
laminate:
Balance c/f 0.00
Page 149 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
SECTION 3 : BILL NO. 1
IRONMONGERY
SUPPLEMENTARY PREAMBLES
Finishes to ironmongery
Where applicable finishes to ironmongery are indicated by suffixes in
accordance with the following list: BS Satin bronze lacquered CH
Chromium plated SC Satin chromium plated SE Silver enamelled GE
Grey enamelled AS Anodised silver AB Anodised bronze AG Anodised
gold ABL Anodised black PB Polished brass PL Polished and lacquered
PT Epoxy coated SD Sanded
HINGES, BOLTS, ETC.
DOOR CLOSERS
"Yale":
42 Standard duty overhead door closer No 0.00
Balance c/f 0.00
Page 150 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
SECTION 3 : BILL NO. 1
STRUCTURAL STEELWORK
The Tenderer is to allow in the pricing of
structural steelwork for all steelwork to be
erected plumb and to include for ALL
necessary steel packing pieces to achieve
same.
Steelwork to be hot dipped galvanized
Grade 300W, as per the standard
specification, complete with all the
necessary cleats, brackets, gussets, packs,
shop fasteners baseplates and the like,
including cleaning of steelwork, shop
priming and loading ready for dispatch to
site and preparation of shop detail
drawings:
The following is applicable in respect of roof trusses:
Trusses are at maximum 4000mm centres
Roof covering is IBR roof sheeting.
ROOFS, ETC .
Truss
43 Roof construction to double pitched roof No. 0.00
approximately 15m x 2.06m high overall at 4m centers, including
top and bottom chords, permanent bracing, bolts, gussets and
38 x 38mm battens fixed over underlay (underlay elsewhere)
SECTION 3 : BILL NO. 1
METALWORK
SUPPLEMENTARY PREAMBLES
Balance c/f 0.00
Page 151 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
PRESSED STEEL DOOR AND FRAME
44 Door and frame manufactured from 2mm thick pre-galvanised No 0.00
mild steel sheet, 1490mm wide x 2800mm high overall
including all ironmongery
45 Door and frame manufactured from 2mm thick pre-galvanised No 0.00
mild steel sheet, 1090mm wide x 2090mm high overall
including all ironmongery
46 Door and frame manufactured from 2mm thick pre-galvanised No 0.00
mild steel sheet, 900mm wide x 2090mm high overall
including all ironmongery
STEEL WINDOWS
Steel windows with top hung opening sections and
brown anodised finish, all as per AAAMSA specifications and:
all glazing to be done according to the National Building
Regulations - Part N:
47 Window W1 size 1200 x 1500mm high with 4mm clear float No 0.00
glass
48 Window WF size 900 x 3700mm high with 4mm clear float No 0.00
glass
49 Window V size 600 x 900mm high with 4mm obscure glass No 0.00
Balance c/f 0.00
Balance b/f 0.00
SECTION 3 : BILL NO. 1
PLASTERING
SCREEDS
Screeds on concrete
1:4 Cement plaster screeds steel trowelled on concrete :
50 25mm Thick on floors and landings m2 0.00
INTERNAL PLASTER
Cement plaster 1:5 wood floated on brickwork :
51 On walls m2 0.00
DIVIDING STRIPS, ETC.
52 50 x 3mm Flat section brass dividing strips between different m 0.00
floor finishes
EXTERNAL PLASTER
Cement plaster 1:5 wood floated on brickwork :
53 On walls m2 0.00
COVER STRIPS, ETC.
54 50 x 50 x 3mm Angle section cast into floor of cable trench to m 0.00
split cables.
Balance c/f 0.00
Page 152 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
SECTION 3 : BILL NO. 1
TILING
SUPPLEMENTARY PREAMBLES
Descriptions
Unless described as "fixed with adhesive to plaster (plaster
elsewhere)" descriptions of tiling on brick or concrete walls,
columns, etc shall be deemed to include 1:4 cement plaster
backing and descriptions of tiling on concrete floors etc shall
be deemed to include 1:3 plaster bedding
FLOOR TILING
350 x 350 non-slip tiles , fixed with adhesive
55 On floors and landings to falls m2 0.00
SECTION 3 : BILL NO. 1
PLUMBING AND DRAINAGE (PROVISIONAL)
SUPPLEMENTARY PREAMBLES
uPVC pipes and fittings:
Soil, waste and vent pipes and fittings shall be solvent weld
jointed
uPVC pressure pipes and fittings:
Pipes for water supply shall be of the class stated
Pipes of 40mm diameter and smaller shall be plain ended with
solvent welded uPVC loose sockets and fittings
Pipes of 50mm diameter and greater shall have sockets and
spigots with push in type integral rubber ring joints. Bends shall
be uPVC and all other fittings shall be cast iron, all with similar
push-in type joints
Copper pipes:
Pipes shall be hard drawn and half-hard pipes of the class
stated. Class 0 (thin walled hard drawn) pipes shall not be
bent. Class 1 (thin walled half-hard), class 2 (half-hard) and
class 3 (heavy walled half-hard) pipes shall only be bent with
benders with inner and outer formers. Fittings to copper waste,
vent and anti-syphon pipes, capillary solder fittings and
compression fittings shall be "Cobra Watertech" type. Capillary
solder fittings shall comply with ISO 2016. Only compression
fittings shall be used in walls or in ground
Balance c/f 0.00
Page 153 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
DRAINAGE
PIPING, ETC.
Rigid PVC drainage pipes:
56 100mm Pipe (No excavation) m 0.00
57 100mm Pipes laid in and including trenches not exceeding m 0.00
1m deep
Extra over rigid uPVC pipes for fittings:
58 100 mm Bend No 0.00
59 100 mm Bend with cleaning eye No 0.00
60 Extra over rigid PVC waste pipes for fittings:
61 100 mm Pan connector No 0.00
62 50 mm Bend with cleaning eye No 0.00
63 100 mm Bend with cleaning eye No 0.00
64 50 mm Junction with cleaning eye No 0.00
Sundries:
65 Testing drainage pipe system Item 0.00
WATER SUPPLIES
Megapipe: HDPE (high density polyethylene) Type 6 SABS :
66 25mm Pipes laid in and including trenches not exceeding 1m m 0.00
deep, including all fittings, etc.
67 75mm Pipes laid in and including trenches not exceeding 1m m 0.00
deep, including all fittings, etc.
Balance c/f 0.00
Page 154 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
Pipe encasing :
68 Encase pipe in concrete including all necessary formwork m3 0.00
Sundries :
69 100mm PVC cleaning eye, including 300 mm x 300 mm cast No 0.00
iron cover and frame, laid in ground
70 Splay cut end to 38 mm PVC pipe No 0.00
71 Splay cut end to 50 mm PVC pipe No 0.00
72 Test water supply pipe system Item 0.00
GULLEYS, ETC.
Precast concrete :
73 100 mm Gulley not exceeding 1,0 m deep to invert, fitted with a No 0.00
galvanised cast iron hinged grating, frame and P-trap, etc.,
complete
SANITARY FITTINGS
"Vaal" :
74 White vitreous china close coupled WC suite, complete with No 0.00
P-trap, 9 litre low level cistern and flushpipe and "Hart Celmac
A" double flap heavy duty white plastic seat
75 455 x 290mm White vitreous china wash hand basin with No 0.00
one taphole configuration, complete with waste, grid, plug and
chain supported on a full universal floor mounted pedestal
and "Cobra Stella" basin mixer
ELECTRIC HOT WATER GEYSERS
50 Litre horizontal type high pressure electric geyser with vacuum No 0.00
breaker and masterflow valve. Provide suitable overflow.
TRAPS, ETC.
76 40 mm rubber P-trap No 0.00
"Cobra" or other approved type :
TAPS, ETC.
Copper :
77 15 mm Service pipe 380mm girth with two brass cap nuts No 0.00
Chromium-plated :
78 "Cobra" (232/350) 15 mm angle regulating valve No 0.00
79 15 mm "Star" No 136 stopcock No 0.00
80 "Cobra" No 136 22 mm compression type underwall stoptap No 0.00
81 15 mm "Star" No 166/041 sink mixer and swivel outlet No 0.00
Balance c/f 0.00
Page 155 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
Brass :
82 50 mm Gate valve No 0.00
FIRE SERVICE
Approved Type :
83 9 kg Dry chemical fire extinguisher including 100mm x 450mm
x 25mm polished hardwood back board with chamfered
edges, fixed to brickwork No 0.00
SLEEVES
PVC pipes :
Pipes 160 mm diameter exceeding 4,5 m and not exceeding
84 5 m long, once bent using a long radius bend and laid below
surface bed with both ends sealed with fill, on completion of No 0.00
cabling
Pipes 160 mm diameter exceeding 8 m and not exceeding
8,5 m long, once bent using a long radius bend and laid below
85 surface bed with both ends sealed with fill, on completion of No 0.00
cabling
SECTION 3 : BILL NO. 1
ELECTRICAL WORK
BUDGETARY ALLOWANCE
86 Provide the budgetary amount of R50 000.00 (Fifty
Thousand Rand Only) for the Electrical Installation complete. Item 0.00
Balance c/f 0.00
Page 156 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
SECTION 3 : BILL NO. 1
MECHANICAL WORK
MECHANICAL WORK
BUDGETARY ALLOWANCE
87 Provide the budgetary amount of R10 000.00 (Ten Thousand Item 0.00
Rand) for the Air Conditioning / Mechanical
Ventilation Installation complete.
SECTION 3 : BILL NO. 1
PAINTWORK
PAINTWORK, ETC., TO NEW WORK
ON FLOATED PLASTER
One coat alkali resistant primer and two coats "Dulux Wash
'n Wear" acrylic emulsion paint:
88 On internal walls m2 0.00
89 On external walls m2 0.00
90 ON PLASTERBOARD m2 0.00
One coat sealer and two coats "Dulux Wash 'n Wear"
acrylic emulsion paint:
On ceilings and cornices
91 ON FIBRE-CEMENT m2 0.00
One coat primer and two coats "Plascon Wall 'n All" acrylic
paint:
On fascias and barge boards
92 m2 0.00
Balance c/f 0.00
Page 157 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY AMOUNT
Balance b/f 0.00
ON METAL
Spot priming defects in pre primed surfaces with zinc
chromate primer and applying one undercoat and two
coats "Dulux Silthane Silk" polyurethane enamel (colour
Fawn) paint on steel:
On doors and frames
93
One coat calcium plumbate primer, one undercoat and two m2 0.00
coats "Plascon Wall 'n All" alkyd enamel paint on
galvanised steel:
TOTAL - carried forward to FINAL SUMMARY 0.00
Page 158 Control Building (132kV)
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
SECTION NO 3
BUILDING WORKS
SECTION 3 : BILL NO. 2
GUARD HOUSE (33kV YARD)
EARTHWORKS (PROVISIONAL)
SUPPLEMENTARY PREAMBLES
Carting away of excavated material
Descriptions of carting away of excavated material shall be
deemed to include loading excavated material onto trucks
directly from the excavations or, alternatively, from stock piles
situated on the building site
EXCAVATION, FILLING, ETC.
Excavation in earth not exceeding 2m deep:
1 Trenches m3 5.82 0.00
Extra over trench and hole excavations in earth for
excavation in:
2 Soft rock m3 1.66 0.00
3 Hard rock m3 0.83 0.00
Extra over all excavations for carting away to a disposal
site complying with environmental regulations:
4 Surplus material from excavations and/or stock piles on site to m3 4.20 0.00
spoil area located by the contractor
Earth filling obtained from the excavations:
5 Under floors, steps, pavings, etc and well compacted in layers m3 2.30 0.00
not exceeding 150mm thick
Balance c/f R 0.00
Page 270 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
Earth filling obtained from commercial sources:
6 Filling with approved material supplied and carted onto site m3 0.00 0.00
by the Contractor, under floors and well compacted in layers
not exceeding 150mm thick
Soil insecticide:
7 Under floors, etc., including forming and poisoning shallow m2 15.36 0.00
furrows against foundation walls etc, filling in furrows and
ramming.
8 To bottoms and sides of trenches, etc. m2 32.01 0.00
SECTION 3 : BILL NO. 2
CONCRETE, FORMWORK AND REINFORCEMENT
SUPPLEMENTARY PREAMBLES
Cost of tests
The costs of making, storing and testing of concrete test cubes
as required under clause 7 "Tests" of SABS 1200 G shall
include the cost of providing cube moulds necessary for the
purpose, for testing costs and for submitting reports on the
tests to the architect. The testing shall be undertaken by an
independent firm or institution nominated by the contractor to
the approval of the architect. (Test cubes are measured
separately)
UNREINFORCED CONCRETE CAST AGAINST
EXCAVATED SURFACES
10MPa/19mm concrete:
9 Blinding to strip footings m3 0.58 0.00
REINFORCED CONCRETE
25MPa/19mm concrete:
10 Strip footings m3 2.68 0.00
Balance c/f R 0.00
Page 271 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
REINFORCEMENT
Fabric reinforcement:
11 Type 395 fabric reinforcement in concrete surface beds, slabs, m2 15.36 0.00
etc.
SECTION3 : BILL NO. 2
MASONRY
SUPPLEMENTARY PREAMBLES
BRICKWORK
Sizes in descriptions
Where sizes in descriptions are given in brick units, "one brick"
shall represent the length and "half brick" the width of a brick
Pointing
Descriptions of recessed pointing to fair face brickwork and
face brickwork shall be deemed to include square recessed,
hollow recessed, weathered pointing, etc
FOUNDATIONS (PROVISIONAL)
Brickwork of NFX bricks in class II mortar:
12 Half brick walls m2 0.94 0.00
13 One brick wall. m2 4.00 0.00
Balance c/f R 0.00
Page 272 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SUPERSTRUCTURE
Brickwork of NFX bricks in class II mortar:
14 Half brick walls m2 11.84 0.00
15 One brick walls m2 50.24 0.00
BRICKWORK SUNDRIES
Brickwork reinforcement:
16 75mm Wide reinforcement built in horizontally m 25.90 0.00
17 150mm Wide reinforcement built in horizontally m 109.90 0.00
Prestressed fabricated lintels:
18 100 x 70mm Lintels in lengths not exceeding 3m m 3.25 0.00
Galvanised hoop iron cramps, ties, etc.:
19 30 x 1,6mm Roof tie 1,5m long with one end fixed to timber No 6.00 0.00
and other end built into brickwork
SECTION 3 : BILL NO.2
WATERPROOFING
DAMP-PROOFING OF WALLS AND FLOORS
One layer of 375 micron "Plastall Gundle Brikgrip DPC"
embossed damp proof course:
20 In walls m2 3.61 0.00
One layer of 250 micron "Plastall Gundle USB Green"
waterproof sheeting sealed at laps with "Gunplas Pressure
Sensitive Tape":
21 Under surface beds m2 15.36 0.00
SECTION 3: BILL NO. 2
ROOF COVERINGS, ETC.
IBR Sheeting
0.6mm Thick IBR Polythene Roof Sheeting to include head and
side wall flashing, closures, washers and screws. To be fixed and
laid strictly in accordance with the manufacturer's specifications.
Sheeting to be painted per clients required colour
22 Roof covering with not exceeding 50 degrees pitch m2 20.00 0.00
Balance c/f R 0.00
Page 273 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SECTION 3 : BILL NO. 2
CARPENTRY AND JOINERY
DOORS, ETC.
Wrought meranti doors hung to timber frames (elsewhere
measured):
23 44mm Framed ledged and braced batten door 813 x 2032mm No 2.00 0.00
high of 44 x 150mm top rail and stiles, 16 x 110mm middle
ledge and braces and 22 x 220mm bottom ledge filled in one
side with 19mm V-jointed one side boarding and covered on
other side with 6mm plywood with sapele veneer let into and
including rebates all round
Balance c/f R 0.00
Page 274 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SECTION 3 : BILL NO. 2
IRONMONGERY
SUPPLEMENTARY PREAMBLES
Finishes to ironmongery
Where applicable finishes to ironmongery are indicated by suffixes
in accordance with the following list: BS Satin bronze lacquered
CH Chromium plated SC Satin chromium plated SE Silver
enamelled GE Grey enamelled AS Anodised silver AB Anodised
bronze AG Anodised gold ABL Anodised black PB Polished brass
PL Polished and lacquered PT Epoxy coated SD Sanded
LOCKS
"Union" :
24 Oval double cylinder upright lock stainless steel with chrome No 2.00 0.00
cylinder L-2241-78SS/2x13PL with brass Protea handle for
cylinder lock CB612-13-PL
Weatherstrips :
25 Weatherguard sealing strip fixed to bottom of 813 mm wide No 1.00 0.00
single door
Balance c/f R 0.00
Page 275 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SECTION 3 : BILL NO.2
STEELWORK
SUPPLEMENTARY PREAMBLES
Descriptions
Descriptions of bolts shall be deemed to include nuts and
washers
Descriptions of expansion anchors and bolts and chemical
anchors and bolts shall be deemed to include nuts, washers
and mortices in brickwork or concrete
Metalwork described as" holed for bolt(s)" shall be deemed to
exclude the bolts unless otherwise described
PRESSED ROOF TRUSSES
ROOFS, ETC.
The following is applicable in respect of roof trusses:
Trusses are at maximum 3000mm centres
Trusses:
26 Roof construction to double pitched roof No. 3.00 0.00
approximately 4.15 x 2.06m high overall at 4m centers, including
top and bottom chords, permanent bracing, bolts, gussets and
38 x 38mm battens fixed over underlay (underlay elsewhere)
PRESSED STEEL DOOR FRAME
1,6mm Rebated frames suitable for half walls
27 Frame for door 813 x 2032mm high No 2.00 0.00
SUNDRY GALVANIZED STEELWORK
STEEL WINDOWS
Steel windows with top hung opening sections and
brown anodised finish, all as per AAAMSA specifications and:
all glazing to be done according to the National Building
Regulations - Part N:
28 Window V size 600 x 900mm high with 4mm obscure glass No 1.00 0.00
29 Window W1 size 1200 x 1500mm high with 4mm clear float No 3.00 0.00
glass
Balance c/f R 0.00
Page 276 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SECTION 3 : BILL NO. 2
PLASTERING
SCREEDS
Screeds on concrete
1:4 Cement plaster screeds steel trowelled on concrete :
30 25mm Thick on floors and landings m2 15.48 0.00
INTERNAL PLASTER
Cement plaster 1:5 wood floated on brickwork :
31 On walls m2 57.75 0.00
EXTERNAL PLASTER
Scratch woodfloat plaster bonded to wall with chickenmesh
tightly spanned and fixed to wall:
32 30mm Thick on walls m2 50.24 0.00
DIVIDING STRIPS, ETC.
33 50 x 3mm Flat section brass dividing strips between different m 1.00 0.00
floor finishes
Balance c/f R 0.00
Page 277 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SECTION 3 : BILL NO. 2
TILING
SUPPLEMENTARY PREAMBLES
Descriptions
Unless described as "fixed with adhesive to plaster (plaster
elsewhere)" descriptions of tiling on brick or concrete walls,
columns, etc shall be deemed to include 1:4 cement plaster
backing and descriptions of tiling on concrete floors etc shall
be deemed to include 1:3 plaster bedding
FLOOR
350 x 350 non-slip tiles , fixed with adhesive
34 On floors and landings to falls m2 15.36 0.00
Balance c/f R 0.00
Page 278 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
DRAINAGE
PIPING, ETC.
Rigid PVC drainage pipes:
34 100mm Pipe (No excavation) m 1.00 0.00
35 100mm Pipes laid in and including trenches not exceeding m 3.00 0.00
1m deep
Extra over rigid uPVC pipes for fittings:
36 100 mm Bend No 3.00 0.00
37 100 mm Bend with cleaning eye No 1.00 0.00
Rigid PVC waste pipes:
38 50 mm Pipe m 4.00 0.00
39 100 mm Pipe m 5.00 0.00
Sundries:
40 Testing drainage pipe system Item 1.00 0.00
WATER SUPPLIES
Megapipe: HDPE (high density polyethylene) Type 6 SABS :
41 25mm Pipes laid in and including trenches not exceeding 1m m 8.00 0.00
deep, including all fittings, etc.
42 50mm Pipes laid in and including trenches not exceeding 1m m 3.00 0.00
deep, including all fittings, etc.
Sundries :
43 100mm PVC cleaning eye, including 300 mm x 300 mm cast No 1.00 0.00
iron cover and frame, laid in ground
44 Test water supply pipe system Item 1.00 0.00
SANITARY FITTINGS
"Vaal" :
45 White vitreous china close coupled WC suite, complete with No 1.00 0.00
P-trap, 9 litre low level cistern and flushpipe and "Hart Celmac
A" double flap heavy duty white plastic seat
Balance c/f R 0.00
Page 279 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
46 32mm x 38 mm "Cobra" (350) CP bottle trap No 1.00 0.00
TAPS, ETC.
Copper :
47 15 mm Service pipe 380 mm girth with two brass cap nuts No 1.00 0.00
Chromium-plated :
48 "Cobra" 15 mm angle regulating valve No 1.00 0.00
Cobra" type :
49 50mm No 128 Stopcock No 1.00 0.00
FIRE SERVICE
Approved Type :
50 9 kg Dry chemical fire extinguisher including 100mm x 450mm No 1.00 0.00
x 25mm polished hardwood back board with chamfered
edges, fixed to brickwork
Balance c/f R 0.00
Page 280 Access Control Building
Vuyani Substation
DESCRIPTION UNIT QTY RATE AMOUNT
Balance b/f R 0.00
SECTION 3 : BILL NO. 2
PAINTWORK
PAINTWORK, ETC., TO NEW WORK
ON INTERNAL PLASTER
One coat alkali resistant primer and two coats "Dulux Wash
'n Wear" acrylic emulsion paint:
51 On internal walls m2 57.75 0.00
ON EXTERNAL PLASTER
52 On external walls m2 50.24 0.00
ON FIBRE-CEMENT
One coat primer and two coats "Plascon Wall 'n All" acrylic
paint:
53 On fascias and barge boards m2 15.70 0.00
ON METAL
Spot priming defects in pre primed surfaces with zinc
chromate primer and apply one undercoat and two finishing
coats "Dulux Silthane Silk" polyurethane enamel (colour
Fawn) paint on steel:
54 On security gates (both side measured flat) m2 3.30 0.00
55 On door frames m2 3.30 0.00
ON WOOD
Two coats polyurethane varnish:
56 On doors m2 6.60 0.00
One coat wood primer and two coats "Plascon Velvaglo" paint:
57 On skirtings not exceeding 300mm girth, painted before fixing m 23.10 0.00
in position
TOTAL - carried forward to FINAL SUMMARY R 0.00
Page 281 Access Control Building
Vuyani Substation
DESCRIPTION UNIT RATE AMOUNT
SECTION NO 3
BUILDING WORKS - EXTERNAL WORKS
SECTION 3 : BILL NO. 3
PAVING SURROUNDING CONTROL BUILDINGS
PRECAST CONCRETE
1 80mm Thick 25MPa precast concrete interlocking block paving m2 0.00
of 220 x 97mm grey paving blocks in herringbone pattern in
accordance with SABS Spec.1058 and laid to falls on sand
layer (elsewhere) with joints filled with sand and vibrated,
including all straight cutting.
2 Extra for edge blocks m 0.00
TOTAL - carried forward to FINAL SUMMARY R 0.00
Page 297 Parking and Paving
Vuyani Substation
DESCRIPTION UNIT RATE AMOUNT
Page 298 Parking and Paving
Vuyani Substation
DESCRIPTION UNIT RATE AMOUNT
Page 299 Parking and Paving
Vuyani Substation
DESCRIPTION UNIT RATE AMOUNT
Page 300 Parking and Paving
Vuyani Substation
DESCRIPTION UNIT RATE AMOUNT
Page 301 Parking and Paving
Vuyani Substation
DESCRIPTION UNIT RATE AMOUNT
Page 302 Parking and Paving
Vuyani Substation
FINAL SUMMARY
Section Description Page No. Amount
1 Preliminary and General 7 0.00
2 Civil Works 143 0.00
3 Control Building (132kV Yard) 183 0.00
8 Access Control Building 293 0.00
10 Parking and Paving 301 0.00
Sub-Total 0.00
Value Added Tax (14%) 14% 0.00
TOTAL TENDER PRICE (Including VAT) 0.00
Page 302 Final Summary

Das könnte Ihnen auch gefallen