COLLEGE OF ENGINEERING AND AGRO-INDUSTRIAL TECHNOLOGY
UNIVERSITY OF THE PHILIPPINES LOS BAOS
General Directions: Read each problem carefully. Answer each problem following the proper format (GIVEN, REQUIRED, SOLUTION). Show ALL pertinent solutions and solve as NEATLY as possible. Express your intermediate answers with at least FOUR decimal places and simplify your FINAL answers up to FOUR SIGNIFICANT FIGURES. BOX your FINAL ANSWERS. Always start each problem on a new page. ANY FORM OF CHEATING WILL BE PENALIZED WITH A GRADE OF 5.0.
Problem 1 (33.33%) Grue created a giant plate with the following cross section using a nanoFerric-Kryptonite- Amorphous Plumbic (nFKAP) material of density 0.02 g/cm 3 . He is to mount the plate on top of a 10m-high cone-shaped reactor located in Siayan Island. However, during the installation of the plate, an energetic 700-N minion was stuck on top of the plate at coordinates (0, -3). If the giant plate is 50-mm thick, determine the coordinate to where the plate must be supported by the tip of the cone to avoid the collapse of the plate, and thus, saving the life of the unfortunate minion. Use g = 9.81 m/s 2 .
Problem 2 (33.33%)
Given the figure, determine the coordinates of the centroid. The shape of a laboratory round bottom flask is generated by rotating the area shown about the y-axis. Determine the surface area of the flask and the volume that can be contained in it.
Create your own table using the template provided.
x y DEPARTMENT OF ENGINEERING SCIENCE COLLEGE OF ENGINEERING AND AGRO-INDUSTRIAL TECHNOLOGY UNIVERSITY OF THE PHILIPPINES LOS BAOS
Problem 3 (33.33%)
For the shaded area shown, determine the following: a) Moment of inertia about x-, y-, and polar (o) axes b) Radii of gyration kX, kY, kZ
Create your own table using the template provided.
SAMPLE TABLES
COMPUTATION OF CENTROID OF THE COMPOSITE AREA Elements 1. 2. 3. 4.
Computation of Centroid ( x , y ): Volume (V):
DEPARTMENT OF ENGINEERING SCIENCE COLLEGE OF ENGINEERING AND AGRO-INDUSTRIAL TECHNOLOGY UNIVERSITY OF THE PHILIPPINES LOS BAOS
COMPUTATION OF SURFACE AREA
1. 2. 3. 4.
Surface Area (S.A.):
COMPUTATION OF MOMENT OF INERTIA Moment of Inertia with respect to the x- axis
1. 2. 3. 4.
Moment of Inertia with respect to the y- axis
1. 2. 3. 4.
Ix = __________ Iy = __________ Io = __________ kx = __________ ky = __________ ko = __________