Sie sind auf Seite 1von 2

Deliver 4 satellite TV carriers over fiber

Thor LTTH systems deliver entire satellite TV programing


lineups over a single fiber cable. Designed to carry 4 or
more RF polarities, LTTH can be customized to include
additional carriers and services. The standard
configuration LB41 system is illustrated. For most content
Application Drawing: DWDM + EDFA = FTTx
Providers, LB41 provides enough capacity. More premium content providers might require up to 6 coax feeds from the
antenna, this would require an LB61 system. Thor LTTH transmitters convert the RF signal from the antenna coax lines into
DWDM compatible laser outputs. These optical signals are combined internally with DWDM passive combiners. The
combined optical signal can be inserted directly to an optical amplifier, or EDFA. It can also be used directly for point to point
links, or for distribution through a 1x16 PLC coupler. Every LTTH system is different, and many options exist. Thor offers free
design and consultation service for integration with GPON and internet service over fiber systems. Contact a Thor
representative today for more information
2014 Thor Broadcast: Torrance, California All rights reserved. Contact: Sales@thorfiber.com 1-800-521-8467
Product Specifications
Optical Parameters
Operating Wavelength 1528 1563 nm
Adjustment Range 1.6 nm
Adjustable Mode 0.05 nm stepping
Wavelength Stability -1 0 pm/
Side Mode Suppression >45 dB
Equivalent Noise Intensity
Cable TV -160 dB/Hz
Satellite TV -145 dB/Hz
Number Tx Outputs 1-6 SC/APC
TX Output Power 6.0 dBm (4mW)
8.0 dBm (6mW)
10.0 dBm (10mW)
Configuration Options
RF Inputs Up to 8 Inputs
RF Optics L-BAND 950-2400 MHz
L-BAND 250-3000 MHz
CATV RF 45-950 MHz
DWDM Passives Internal or External
Satellite RF Parameters
Operating Bandwidth 950-2400 MHz
250-3000 MHz (Available)
Input RF Power -25 (-14) dBmV
RF Linearity 0.5 dB (40 MHz)
1.0 (950-2400 MHz)
Input Impedance 75
RF Return Loss 12 dB
RF Connector Type-F Female
Equivalent Noise Intensity >115 dB/Hz
Link Gain 25 dB
General Parameters
Serial Interface RS-232
SNMP Interface RJ-45
Power Supply 90-260 VAC
Power Consumption 50 W
Operating Temp. -5 65
Relative Humidity <85 %
Dimensions 19 x 10.5 x 1.75 in
PLC Splitter Loss Information
Configuration 1x2 1x4 1x8 1x16 1x32 1x64 1x128 2x2 2x4 2x8 2x16 2x32
Insertion Loss (dB) 3.7 7.2 10.5 13.5 16.5 20.5 25.5 3.9 7.5 10.8 14.1 17.4
Uniformity (dB) 0.6 0.6 0.8 1.2 1.7 2.5 2.9 0.8 1.2 1.5 2.0 2.5
Satellite TV over fiber subscriber units
Thor LTTH optical receivers are designed for low cost
implementation of satellite TV over fiber L-Band to the
home (LTTH). Thor LTTH combines multiple RF signals
delivered over coax to a single fiber optic cable. These low
cost subscriber units are designed to convert the fiber
signal back to the original coax connectors needed for the
providers equipment. Unlike a satellite multiswitch, LTTH
delivers the entire programming lineup to every subscriber
end point. This is equivalent to every subscriber having a
Satellite antenna at their location. Thor LTTH equipment is transparent to the satellite TV provider, and only one master
antenna is needed for an entire community. No agreements or contracts are needed between the system operator (You) and
the satellite TV provider. Thor LTTH allows developers and property managers to eliminate all residential satellite antennas
without eliminating satellite TV service as an option to the tenants. In addition to the standard 4 channel LB41 configuration,
LTTH is also available in custom configurations. Terrestrial TV frequency carriers (45-900MHz) can also be incorporated into
the design. This optionally allows delivery of cable TV or FTA programming in addition to satellite TV. Every fiber to the home
system is different, contact Thor today for free design and consultation services.
Application Drawing: Multi-Stage FTTx Amplification
LNB Feeds
Optical Parameters
Wavelength Range 1528 1563 nm
Receiver Sensitivity -13 dBm
Receiver Input Range 0.0 (-12.0) dBm
Side Mode Suppression >45 dB
Equivalent Noise Intensity
Cable TV -160 dB/Hz
Satellite TV -145 dB/Hz
Number Rx Inputs 1-6 SC/APC
Configuration Options
RF Outputs Up to 8 Outputs
RF Optics L-BAND 950-2400 MHz
L-BAND 45-3000 MHz
CATV RF 45-900 MHz
DWDM Passives Internal or External
Satellite RF Parameters
Operating Bandwidth 200-2800 MHz
45-3000 MHz (Available)
RF Output Power -15 (-40) dBmV
RF Linearity 0.5 dB (40 MHz)
1.0 (950-2400 MHz)
Output Impedance 75
RF Return Loss 12 dB
RF Connector Type-F Female
General Parameters
Power Supply 90-260 VAC (12VDC Optional)
Power Consumption 25 W
Operating Temp. -45 150 F
Relative Humidity <85 %
Dimensions 10.4 x 7.8 x 1.38 in
+7.5dBm +18dBm
+18 dB
EDFA
1x8 PLC (-10.5dB)
8 Outputs @7.5dBm
DWDM MUX
+7.0dBm +34dBm
+34 dB
EDFA
1x16 PLC (-13.5dB)
16 Outputs @20.5dBm
+7.5dBm
+20.5dBm
+20dBm
0.0dBm
1x64 PLC (-20.5dB)
64 Outputs @ 0.0dBm
Max Loss
=12.0 dB
DWDM DeMUX
Multiswitch
Receiver /
Demodulator
1. IF Amp + Otx
2. EDFA Preamp
3. Primary EDFA
4. 1x32-128 PLC 1
2
3
4
Supports in field splits up to 12 dB loss
Block Diagram
Input Power (-12.0dBm)
2014 Thor Broadcast: Torrance, California All rights reserved. Contact: Sales@thorfiber.com 1-800-521-8467
Product Specifications
*Optical power
levels given as
example only

Das könnte Ihnen auch gefallen