Beruflich Dokumente
Kultur Dokumente
control.
• 24 volt control circuit on all units with
remote control.
• CSA rated for intermittent duty.
PE462A
10,000
psi
LR19814
E A
D G
C F
PE46 10,000 3,450 77/81* 25** 500 450 51 46 19 5/8 613/16 111/2 10 18 1/2 9 1/2 8 79
Series
92
PUMPS
PE464
PE462S
Reservoir
For use with Order Valve Valve Valve Control Usable
Cyl. Type Description No. Type No. Function Switch†† Motor (cu. in.)
Single-Acting Base model 11/2 hp PE462 3-Way 9584 Advance Remote Motor Control 11/2 hp, 115/230 VAC* 590
pump with 2 1/2 gal. Return† (10 ft.) on/off 60 Hz, Single Phase
metal reservoir.
Single-Acting PE462, except has PE462S†† 3-Way 9579 Advance Remote Motor 11/2 hp, 115/230 VAC* 590
solenoid valve. Return** Valve (25 ft.) 60 Hz, Single Phase
Single-Acting PE462, except has PE462A∞ Auto/Dump 9610 Advance Remote Motor Control 11/2 hp, 115/230 VAC* 590
“dump valve” 3-Way Return (10 ft.) on/off 60 Hz, Single Phase
Double-Acting/ PE462, except has PE464 4-Way 9500 Advance Hold Remote Motor Control 11/2 hp, 115/230 VAC* 590
Multi-Single Acting 9500 double-acting valve. Return† (10 ft.) on/off 60 Hz, Single Phase
Double-Acting/ PE462S, except has PE464S†† 3/4-Way 9592 Advance Remote Motor/Valve 11/2 hp, 115/230 VAC* 590
Multi-Single Acting 9592 double-acting valve. Return** (10 ft.) 60 Hz, Single Phase
* Available with 220 V., 50 Hz motor (to order, place suffix “50-220” † “Advance” position holds pressure with motor shut off. “Return”
behind pump order number). Specify voltage when ordering. position returns cylinder.
** “Advance” position holds pressure with motor shut off. †† 115 volt, 60 Hz.
*** Usable oil is calculated with the oil fill at the recommended level of ††† The remote motor control switch on PE46 series pumps is 24 volt.
1
/2" below reservoir cover plate. ∞ Not to be used for lifting. When pump is shut off, oil returns
to reservoir.
∞
Contact Factor y for special 12VDC version for ser vice vehicles
www.powerteam.com 93