JLCoopers MCSClipShot interface. The DADpad has 40 multicolored LCD Programmable buttons that can be assigned both Audio and Command Cuts across ten pages for a total of 400 pre-assigned cuts.
The DADpad can be configured to work with the DAD Main Array page or both of the Mini Array pages. By being associated with the Array pages, one can also load different User Setup file which in turn would load those pre-assigned cuts into the DADpad buttons.
DADpad is a purchase item and must be enabled on the DAD Security Key.
Setting up the DAD CFI file
In DAD, one must configure the workstations CFI for use with the DADpad.
CFI LINE EXAMPLE DETAILS [EXTERNAL DEVICES] DADPAD_ACTION
PRESS Press | Release. Controls how DAD gets triggered - when the DADpad button is "pressed" or "released". Default is PRESS DADPAD_MODE
FULL FULL= Utilizes the full Array page SPLIT= Uses the two Mini- Arrays [SERIAL] DADPAD_IO 1 COM Port setting for use with DADpad. DADpad runs at: 38400 N 8 1 COM#_INFO 38400 N 8 1
Wiring the DADpad to DAD
The DADpad will communicate with the DAD workstation via a 422 cable.
The wiring pin-out for the DADpad is listed below.
IMPORTANT: The pin-out is not standard for 422. Please note the proper pin-out below
The DADpad unit should be powered on BEFORE one starts up the DAD application.
When DAD connects to the DADpad unit one will see the DADpad cycle through a series of tests. The buttons 1 through 10 will turn on then off and the LCD Display will state:
ENCO SYSTEMS, Inc. DAD version (version number)
Using the DADpad in FULL Mode
When one has the DAD CFI set for DADPAD_MODE=FULL, one will see the Main Array page across the DADpad unit. In DAD, the Main Array page size will be changed from its normal 8 columns by 6 rows to the DADpad size of 10 columns by 4 rows.
One can press the numbers 1 through 10 to change between the Main Array pages.
Using the DADpad in SPLIT mode
When one has the DAD CFI set for DADPAD_MODE=SPLIT, one will see the two Mini Array pages across the DADpad unit. In DAD, the Mini Array pages size will be changed from their normal 4 columns by 6 rows to the DADpad size of 5 columns by 4 rows. When in this mode, Mini Array 1 will be on the left side and Mini Array 2 will be on the right side.
One can move between Mini-Array1 and 2 by using the < or > arrow buttons. Once on a side one can press the numbers 1 through 10 to change between that Arrays pages.
Setting colors for the Arrays buttons.
The Array button use specific DADpad colors. One can right click on an Array button and select the DADpad colors.
The DADpad unit will only display the seven colors that have DADpad as part of the color name.
Other Function Keys on the DADpad Unit
F-Keys
F3 Qwerty Keyboard This changes the DADPAD Screen to display a Qwerty Keyboard. One can enter a search string and have the results displayed on the Array buttons. To do a search, enter the letters to search for and press ENTER. Once the search has been done, one can press CLEAR to return to the Programmed button for that User Setup.
F8 Cues Machine. When one presses F8 one can select an assigned button. This allows one to use the < or > arrow buttons to move the head forward or backwards in the selected audio file. One will hear a sample of audio while doing this. Once the head marker has been set pressing ENTER will temporally save the Head marker in that location.
F-Key combinations
F5+F6+F7 at power-up of the DADPAD Unit initiates a reload of memory for the unit. This is like a reload or restart.
Other Keys
The numbered buttons across the top are for the Array pages. (page 1 = button 1 etc).
When using SPLIT mode (Mini-Array 1 is on the left and Mini-Array 2 is on the right) one can move between Mini-Array1 and 2 by using the < or > arrow buttons.