Beruflich Dokumente
Kultur Dokumente
Conveyor Chains
Guarantee
uni-chains guarantees for one year against defects caused by faults in
design, production or material.
Patents
uni-chains A/S manufactures products under one or more of the following
U.S. Patents 4.754.872, 5.000.312, 5.027.944, 5.127.515, 5.305.869,
5.307.923, 5.379.883, 5.482.156, 5.697.492, 29/039.113, 29/039.114.
Other U.S. and foreign utility and design patents pending.
European patents and other patents in Europe:
0480863, 159544, 152689, 169602, 0439/96, MR09251995, MR09261995,
M960477.4, 145290, 170664, 94610049.2, 2309062, 0680898,
G9316589.7, DE431286402.
With reservations of printer’s error.
www.unichains.com
If you want to know more about uni-chains fast:
Take a look at our homepage www.unichains.com.
Contents
Material Properties
Steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Plastic • Standard Grades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Plastic • Special Grades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4
Contents
5
Contents
Finger Plates
uni 880 Rib . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
uni 880 Rib-Flex and uni 882 Rib-Flex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Special Sprockets
Two Part Sprockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Sprockets for Snap-On Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Idlers and Guide Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
6
Material Steel
Properties
Pin material for chains made of this austenitic stainless steel: Ferritic stainless steel
18/ CrNi steel, cold drawn to high hardness strength.
8
Acetal
Acetal is a thermoplastic material with very good mechanical
and thermal properties. The material can also be characterized Standard material for our
by great strength, elasticity and dimensional stability. Acetal is plastic chains is acetal
resistant to a wide selection of chemicals. Acetal has good qua- which is made in 3 diffe-
lities for slide material, low coefficient of friction and a good rent grades.
resistance to wear.
Recommended temperature area: -40 to +90°C (-40 to +194°F).
D-Acetal
Acetal polymers with self-
lubricating components.
Colour: Grey and white.
LF-Acetal
Acetal polymers with
improved self-lubricating
components.
Colour: Brown.
SLF-Acetal
Acetal polymers with self-
lubricating additives to ob-
tain the lowest possible fric-
tion resistance.
Colour: Dark grey.
Standard pin material for plastic chains is 18/8 CrNi steel, but
most types can be supplied with plastic pins too.
8
Material Plastic
Properties Special Grades
Temperature range
°C °F
Glass reinforced polypropylene - AR +1 to +80°C +33 to +176°F
Glass reinforced polyester - GR -40 to +125°C -40 to +257°F
Antistatic material - AS -40 to + 90°C -40 to +194°F
Polycarbonate - PC -20 to +130°C -4 to +266°F
Polyamide - PA66 -40 to +140°C -40 to +284°F
Flame Retardant Polyamide - FR +1 to +104°C +33 to +219°F
Polyvinylidenfluoride - PVDF -40 to +100°C -40 to +212°F
Polyamide - PA6 -40 to +120°C -40 to +248°F
Please, note that the temperature may have an effect on the mechanical properties of the
chains.
9
Material Approvals
Properties
Approval of Materials
F.D.A.
F.D.A. (US Food and Drug Administration) uni-chains uses approved
US federal agency that approves materials for use with food contact in
applications other than applications in meat and poultry industries. materials of the following
types:
Applications for approvals are submitted by the supplier of the ma-
terial.
Acetal-D
PP
PE
PUR rubber for inserts
uni-chains products
approved for packaged
goods. All of the above
listed products plus the fol-
lowing:
10
Slat Top Chains uni 810/812/815
Steel • Straight running Main application is for trans-
portation of glass bottles.
The chains are available in ferritic uni 812 e.g. is suitable for soft
stainless steel 430 (uni SS812), drinks breweries, bottling
18/ CrNi stainless steel 304
8 plants and uni 815 for the wine
(uni SS815) and in carbon steel
(uni S810): See page 7. industry.
Chain lubrication recommend-
Pin material: See page 7. ed.
Non-standard widths can also be sup- The chains can be supplied
plied. with ground surface for widths
up to 114.3 mm (4 1/2 inch):
Supply unit: 3.048 m = 10 ft. Type SSX. These chains are
mainly used for inline feeders
T TRAVEL and pressureless combiners.
The chains can be supplied
with underlying tabs.
The K325 wide chain in all
G Q W materials with the width
82.6 mm (3 1/4 inch) is availa-
ble with a wider plate distance.
This chain has a smaller back-
L PD flex radius.
H
P E mm inch
E 6.4 1/
4
mm inch
E 6.35 1/
4
G 82.5 3 1/4
H 9.5 3/
8
W Q G 1/
L 6.4 4
P 38.1 1 1/2
Q 79.4 3 1/8
T 3.15 1/
8
The weights mentioned in the table are valid for uni S800, uni SS802 (430) and
uni SS805 (304).
12
Slat Top Chains uni 881
Steel • Side flexing Main application is for transporta-
tion of glass bottles.
uni 881 (430) e.g is suitable for
The chains are available in ferritic soft drinks breweries, bottling
stainless steel 430 (uni SS881), plants and uni 881 (304) for the
18/ CrNi stainless steel 304
8
wine industry.
(uni SS881) and in carbon steel
(uni S881): See page 7. Chain lubrication recommended.
The chains can be supplied with
Pin material: See page 7. ground surface for widths up to
114.3 mm (4 1/2 inch): Type SSX.
Supply unit: 3.048 m = 10 ft. The chain is supplied with bevels
to retain the chain in the curved
conveyor sections.
mm inch
R E 6.4 1/
4
uni SS881-K750 190.5 7 1/2 5.5 3.70 75 3 610 24 uni SS881 (304) 2250 500
uni S881 4000 900
The weights mentioned in the table are valid for uni SS881 (430), uni SS881 (304)
and uni S881.
31.8 mm
1.25 inch
Sprockets for uni 881
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. cast iron diameter diameter diameter diameter
steel cast iron plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-881-19 2-881-19 3-881-19 19 20.0 0.78 50.0 2 50.0 2 117.3 4.62 117.1 4.61 75.0 2.95 104.24 4.10
1-881-21 2-881-21 3-881-21 21 20.0 0.78 50.0 2 50.0 2 129.2 5.09 130.1 5.12 75.0 2.95 116.15 4.57
1-881-23 2-881-23 3-881-23 23 20.0 0.78 50.0 2 50.0 2 141.2 5.56 142.0 5.59 75.0 2.95 128.12 5.04
1-881-25 2-881-25 3-881-25 25 20.0 0.78 50.0 2 50.0 2 153.2 6.03 154.2 6.07 75.0 2.95 140.11 5.52
1-881-27 2-881-27 3-881-27 27 20.0 0.78 50.0 2 57.2 2 1/4 165.2 6.50 166.6 6.56 75.0 2.95 152.11 5.99
1-881-29 2-881-29 3-881-29 29 20.0 0.78 50.0 2 57.2 2 1/ 177.2 6.98 179.0 7.05 75.0 2.95 164.13 6.46
4
1-881-31 2-881-31 3-881-31 31 20.0 0.78 50.0 2 57.2 2 1/ 189.3 7.45 191.3 7.53 75.0 2.95 176.20 6.94
4
42.3 mm
1.67 inch
Idlers: See page 86.
All sprockets are supplied with pilot bore. Plastic sprockets are also available as two part sprockets: See page 84.
Sprockets can be supplied with larger bores, contact uni-chains.
The hub diameters mentioned in the table are valid for steel sprockets.
Other teeth numbers and sprockets in stainless steel are available upon request.
13
Slat Top Chains uni 881 TAB
Steel • Side flexing Main application is for transporta-
tion of glass bottles. uni SS881
TAB (430) e.g. is suitable for soft
The chains are available in ferritic drinks breweries, bottling plants
stainless steel 430 (uni SS881 TAB), and uni SS881 TAB (304) for the
18/ CrNi stainless steel 304
8 wine industry. Chain lubrication
(uni SS881 TAB) and in carbon steel recommended.
(uni S881 TAB): See page 7.
The chains can be supplied with
Pin material: See page 7. ground surface for widths up to
114.3 mm (4 1/2 inch): Type SSX.
Supply unit: 3.048 m = 10 ft.
The chain is supplied with welded
tabs to retain the chain in the
curved conveyor sections.
J 56.2 2 7/32
P 1/
K 12.7 2
L E
L 6.4 1/
4
P 38.1 1 1/2
Q 43.0 1 11/16
uni width W weight backflex radius min. radius R T 3.15 1/
8
14
Slat Top Chains uni Magnet type
Steel • Side flexing
Main application is for
transportation of glass bottles.
The chain is available in ferritic
stainless steel 430 (uni SS Magnet type) The chain is retained in the
and in carbon steel (uni S Magnet type):
See page 7. curved conveyor sections by
built-in magnets. The advantage
Magnet type cannot be supplied in of this is that the chain can eas-
18/ CrNi steel as the chain must be attract-
8
ed by magnets. ily be taken off these sections
for cleaning, replacement of
Pin material: See page 7. wearstrips etc.
Supply unit: 3.048 m = 10 ft.
The chains can be supplied
with underlying tabs.
W Q G
R mm inch
E 6.4 1/
4
G 44.0 1 47/64
TRAVEL
H 9.6 3/
8
L 6.35 1/
P 4
H T L P 38.1 1 1/2
Q 42.0 1 21/32
E T 3.15 1/
8
uni SS Magnet type K450 114.3 4 1/2 3.1 2.08 75 3 457 18 uni SS Magnet type (430) 2250 500
uni SS Magnet type K750 190.5 7 1/ 4.5 3.02 75 3 457 18 uni S Magnet type 4000 900
2
The weights mentioned in the table are valid for uni SS Magnet type (430) and
uni S Magnet type.
42.3 mm
Sprockets for uni Magnet type 1.67 inch
uni no. bore pitch overall bottom
reference no. of min. max. plastic max. cast iron diameter diameter diameter
steel cast iron plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch
1-815-19 2-815-19 3-815-19 19 20.0 0.78 50.0 2 50.0 2 117.3 4.62 117.1 4.61 104.24 4.10
1-815-21 2-815-21 3-815-21 21 20.0 0.78 50.0 2 50.0 2 129.2 5.09 130.1 5.12 116.15 4.57
1-815-23 2-815-23 3-815-23 23 20.0 0.78 50.0 2 50.0 2 141.2 5.56 142.0 5.59 128.12 5.04
1-815-25 2-815-25 3-815-25 25 20.0 0.78 50.0 2 50.0 2 153.2 6.03 154.2 6.07 140.11 5.52
1-815-27 2-815-27 3-815-27 27 20.0 0.78 50.0 2 57.2 2 1/4 165.2 6.50 166.6 6.56 152.11 5.99
1-815-29 2-815-29 3-815-29 29 20.0 0.78 50.0 2 57.2 2 1/4 177.2 6.98 179.0 7.05 164.13 6.46
1-815-31 2-815-31 3-815-31 31 20.0 0.78 50.0 2 57.2 2 1/4 189.3 7.45 191.3 7.53 176.20 6.94
15
Slat Top Chains uni 881 Super Flex
Steel • Side flexing Main application is for trans-
portation of glass bottles.
uni 881 Super Flex chain has a
The chains are available in ferritic special design bearing shoe on the
stainless steel 430 (uni SS881 SFL), underside. The SFL shoe ensures
18/ CrNi stainless steel 304
8 that the chain is always held total-
(uni SS881 SFL) and in carbon
steel (uni S881 SFL). See page 7. ly flat against the wearstrips in
curves. Its design also reduces
Pin material: See page 7. vibrations. Therefore the problems
with transportation of unstable
Supply unit: 3.048 m = 10 ft. bottles and containers are mini-
mized.
SFL chain can be lifted out of the
carry wearstrips without the need
for any tools. Cleaning of the con-
veyor, removal of broken glass is
H easy.
Please, note the R-type has a mini-
mum turn radius of 200 mm
(7.87 inch). This is space-saving
and makes the use of turn discs
with ball bearing possible. See
curve catalogue.
W G J Q
Curves are available for uni 881
Super Flex. Please, see curve cata-
R logue.
mm inch
TRAVEL T 1/4
E 6.4
P G 46.5 1 53/64
L E H 22.0 57/
64
J 24.5 31/
32
L 6.4 1/4
P 38.1 1 1/2
uni SS881 SFL-K450 114.3 4 1/2 3.7 2.49 75 3 610 24 chain N lbf
uni SS881 SFL-K750 190.5 7 1/2 5.5 3.70 75 3 610 24 uni SS881 SFL (430) 2250 500
The weights mentioned in the table are valid for uni SS881 Super Flex (430), uni SS881 SFL (304) 2250 500
uni SS881 Super Flex (304) and uni S881 Super Flex. uni S881 SFL 4000 900
Idlers: See page 86. All sprockets are supplied with pilot bore.
The hub diameters mentioned in the table are valid for steel sprockets.
Other teeth numbers and sprockets in stainless steel are available upon request.
16
Slat Top Chains uni 8811
Steel • Side flexing Main application is for trans-
portation of glass bottles in
curves. uni 8811 (430) e.g. is
The chains are available in ferritic suitable for soft drinks brew-
stainless steel 430 (uni SS8811),
18/ CrNi stainless steel 304
8
eries, bottling plants and
(uni SS8811) and in carbon steel uni 8811 (304) for the wine
(uni S8811): See page 7. industry.
Pin material: See page 7. Chain lubrication must be
applied.
Supply unit: 3.048 m = 10 ft.
The eye design on uni 8811
gives a more closed surface on
the chain, leading to a steadier
transportation of the products.
H
The chains can be supplied
with ground surface for widths
up to 114.3 mm (4 1/2 inch):
Type SSX.
The chain is supplied with
W G Q bevels to retain the chain in the
curved conveyor sections.
R Curves for uni 8811: Please,
see curve catalogue.
mm inch
TRAVEL 1/
T E 6.4 4
L 6.4 1/
4
P 38.1 1 1/2
Idlers: See page 86. All sprockets are supplied with pilot bore. Plastic sprockets are also available as two part 42.3 mm
sprockets: See page 84. Steel sprockets can be supplied with larger bores, contact uni-chains. 1.67 inch
The hub diameters mentioned in the table are valid for steel sprockets. Other teeth numbers and sprockets in stain-
less steel are available upon request.
17
Slat Top Chains uni 8811 TAB
Steel • Side flexing Main application is for transporta-
tion of glass bottles in curves.
uni 8811 TAB (430) e.g. is suit-
The chains are available in ferritic able for soft drinks breweries,
stainless steel 430 (uni SS8811 TAB), bottling plants and uni 8811 TAB
18/ CrNi stainless steel 304
8 (304) for the wine industry. Chain
(uni SS8811 TAB) and in carbon lubrication must be applied.
steel (uni S8811 TAB): See page 7.
The eye design on uni 8811 TAB
Pin material: See page 7. gives a more closed surface on the
chain, leading to a steadier trans-
Supply unit: 3.048 m = 10 ft. portation of the products.
The chains can be supplied with
ground surface for widths up to
114.3 mm (4 1/2 inch): Type SSX.
H
The chain is supplied with welded
K tabs to retain the chain in the cur-
ved conveyor sections.
Curves are available for
uni 8811 TAB: Please, see curve
catalogue.
W Q G J mm inch
E 6.4 1/
4
R 1 3/4
G (curve) 44.5
G (straight) 46.0 1 13/16
H 16.3 41/
64
T
J 56.2 2 7/32
TRAVEL
K 12.7 1/
2
L 6.4 1/
P 4
P 38.1 1 1/2
L E
Q 43.0 1 11/16
T 3.15 1/
8
All sprockets are supplied with pilot bore. Plastic sprockets are also available as two part sprockets: See page 84. 42.3 mm
Steel sprockets can be supplied with larger bores, contact uni-chains. 1.67 inch
The hub diameters mentioned in the table are valid for steel sprockets.
Other teeth numbers and sprockets in stainless steel are available upon request.
18
Slat Top Chains uni 8811 Super Flex
Steel • Side flexing Main application is for trans-
portation of glass bottles in curves.
The chains are available in ferritic The eye design on uni 8811 Super
stainless steel (uni SS8811 SFL), Flex gives a more closed surface on
18/ CrNi steel 304 (uni SS8811 SFL) the chain, leading to a steadier
8
and in carbon steel (uni S8811 SFL): transportation of the products.
See page 7.
The uni 8811 Super Flex chain has
Pin material: See page 7. uni 8811 as base chain. The design
of the tab on the chain ensures a
Supply unit: 3.048 m = 10 ft. horizontal level and also an
elimination of vibrations, and there-
fore the problems with transpor-
tation of fragile products are mini-
mized.
uni 8811 Super Flex is well suited
for installations where dirt on the
H chain is a problem.
Cleaning is easy. The chain is easy
to install and remove - without the
use of tools.
R
mm inch
E 6.4 1/
4
TRAVEL T
G 46.5 1 53/64
P H 22.0 57/
64
L E J 24.5 31/
32
L 6.4 1/
4
P 38.1 1 1/2
Q 42.7 1 23/32
T 3.15 1/
8
uni width W weight backflex radius min. radius R
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft
Idlers: See page 86. All sprockets are supplied with pilot bore.
The hub diameters mentioned in the table are valid for steel sprockets.
Other teeth numbers and sprockets in stainless steel are available upon request.
19
Slat Top Chains uni 820/831
Plastic • Straight running Main application is for trans-
portation of various food pro-
ducts and containers.
Standard materials: Acetal D-grey
or white, LF-brown and SLF-dark The uni 820 and uni 831 chains
grey. See page 8.
are the plastic version of the
Special materials: See page 9. related uni 812 steel chain. The
plastic chains however have a
Pin material: 18/8 CrNi steel.
The chains can be supplied with plastic reinforcing middle rib under-
pins. neath.
The plate thickness is 4 mm
Supply unit: 3.048 m = 10 ft.
(5/32 inch) for the uni 820-series
and 5 mm (25/128 inch) for the
uni 831-series.
P
L
H The plates overlap, so there is
no space between the links.
E
T
TRAVEL The links are held together by
pins secured in a blind hole at
one end and a knurling at the
other end, therefore the travel
direction indicated must be fol-
lowed.
G Q W
mm inch
E 6.35 1/
4
G 44.5 1 3/4
H (820) 9.5 3/
8
L 7.1 9/
32
uni width W weight bfl. radius uni width W weight bfl. radius
P 38.1 1 1/2
ref. no. mm inch kg/ lbs/ mm inch ref. no. mm inch kg/ lbs/ mm inch
m ft m ft
Q 41.5 1 41/64
uni 820-K250 63.5 2 1/2 0.74 0.50 75 3 uni 831-K250 63.5 2 1/2 0.91 0.61 75 3
T (820) 4.0 5/
32
uni 820-K325 82.6 3 1/4 0.85 0.57 75 3 uni 831-K325 82.6 3 1/4 1.04 0.70 75 3
T (831) 5.0 25/
128
uni 820-K350 88.9 3 1/2 0.89 0.60 75 3 uni 831-K350 88.9 3 1/2 1.08 0.73 75 3
uni 820-K400 101.6 4 0.95 0.64 75 3 uni 831-K400 101.6 4 1.20 0.81 75 3 All dimensions are for acetal
uni 820-K450 114.3 4 1/2 1.03 0.69 75 3 uni 831-K450 114.3 4 1/2 1.29 0.87 75 3 chains.
uni 820-K600 152.4 6 1.25 0.84 75 3 uni 831-K600 152.4 6 1.56 1.05 75 3 Max. permissible tensile force
uni 820-K750 190.5 7 1/2 1.47 0.99 75 3 uni 831-K750 190.5 7 1/2 1.82 1.22 75 3 chain N lbf
uni 820/831 2000 450
Idlers: See page 86. All sprockets are supplied with pilot bore. Plastic sprockets are also available as two part
sprockets: See page 84. Sprockets can be supplied with larger bores, contact uni-chains.
Other teeth numbers and sprockets in stainless steel are available upon request.
20
Slat Top Chains uni 821
Plastic • Straight running Main application is for trans-
portation of various packaged
food products and containers.
Standard materials: Acetal D-grey
or white, LF-brown and SLF-dark
grey. See page 8. The uni 821 chain is conside-
rably stronger than the
Special materials: See page 9.
uni 820/831 chains and it is
Pin material: 18/8 CrNi steel. available in widths up to
The chains can be supplied with 304.8 mm (12 inch).
plastic pins.
G 140.0 5 33/64
H 9.5 3/
8
L 8.0 5/
16
T P 38.1 1 1/2
Q 136.5 5 3/8
uni width W weight backflex radius T 5.0 25/
128
reference no. mm inch kg/ lbs/ mm inch
m ft
All dimensions are for acetal
uni 821-K750 190.5 7 1/2 2.59 1.74 75 3
chains.
uni 821-K1000 254.0 10 3.08 2.07 75 3
uni 821-K1200 304.8 12 3.35 2.25 75 3
Max. permissible tensile force
chain N lbf
uni 821 3000 675
All sprockets are supplied with pilot bore.* 3-821-25 plastic is also available as two part sprocket.
Sprockets can be supplied with larger bores, contact uni-chains.
Other teeth numbers and sprockets in stainless steel are available upon request.
21
Slat Top Chains uni SSB
Plastic • Straight running
uni SSB is designed for trans-
portation of filled or empty
Standard materials: Acetal cans and plastic bottles.
LF-brown and PP-grey. uni SSB is assembled with the
See page 8. massive endlock system.
Special materials: See page 9. The chain is available in a
closed version and with 2 diffe-
Pin material: 18/8 CrNi steel. rent openings (29% and 32%).
The chain can also be supplied uni SSB is also available as a
with PP and GR pins.
modular belt system.
Supply unit: 3.048 m = 10 ft.
mm inch
E 6.5 1/
P 4
L 6.35 1/
4
L
P 38.1 1 1/2
T 12.7 1/
2
E
TRAVEL
T
n
01 e i
20 abl
l
ai
Av
W
uni SSB C-K450 114.3 4 1/2 1.81 1.22 45 0.77 uni SSB K450 4110 910
uni SSB C-K600 152.4 6 2.36 1.60 45 0.77 uni SSB K600 5490 1220
uni SSB C-K750 190.5 7 1/2 3.01 2.03 45 0.77 uni SSB K750 6860 1520
uni SSB 29%-K300 76.2 3 1.04 0.70 45 0.77 The values in the table are for uni
uni SSB 29%-K600 152.4 6 2.15 1.45 45 0.77 SSB in acetal with steel pins.
Please, contact uni-chains for
uni SSB 32%-K300 76.2 3 0.79 0.53 45 0.77
further information - also for
uni SSB 32%-K600 152.4 6 1.67 1.13 45 0.77 information about the placing of
The mentioned weights are for acetal chains with steel pins. sprockets.
Sprocket for uni SSB single row (K325, K450, K600 and K750)
uni no. bore pitch overall hub
reference no. of min. max. diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch
1-SSB-19 3-SSB-19 19 20.0 0.78 40.0 1.57 117.3 4.62 117.1 4.61 63.0 2.48
1-SSB-21 3-SSB-21 21 20.0 0.78 40.0 1.57 129.3 5.09 130.0 5.12 63.0 2.48
1-SSB-23 3-SSB-23 23 20.0 0.78 40.0 1.57 141.2 5.56 142.0 5.59 63.0 2.48
1-SSB-25 3-SSB-25 25 20.0 0.78 40.0 1.57 153.2 6.03 154.2 6.07 63.0 2.48
1-SSB-27 3-SSB-27 27 20.0 0.78 40.0 1.57 165.2 6.50 166.6 6.56 63.0 2.48 Tooth width:
1-SSB-29 3-SSB-29 29 20.0 0.78 40.0 1.57 177.2 6.98 179.0 7.05 63.0 2.48 15 mm (0.59 inch)
1-SSB-31 3-SSB-31 31 20.0 0.78 40.0 1.57 189.3 7.45 191.3 7.53 63.0 2.48 Width of sprockets:
42.3 mm (1.67 inch)
Double row sprockets (uni 820 sprockets) for uni SSB (K300, K600 and K750): Please, see
page 20.
Two part sprockets - single and double row: See page 84.
22
Slat Top Chains uni 879
Plastic • Side flexing The uni 879 series has a wide
range of applications for transpor-
tation of various food products and
Standard materials: Acetal D- light weight items in curves e.g.
grey or white, LF-brown and plastic bottles, cans, cartons etc.
SLF-dark grey. See page 8. The uni 879 series is identical to
the uni 880 series except for the
Special materials: See page 9. plate thickness which is 5 mm
(25/128 inch).
Pin material: 18/8 CrNi steel. The uni 879 series is supplied in
The chains can be supplied with widths from 63.5 mm (2 1/2 inch)
plastic pins. to 190.5 mm (7 1/2 inch).
Supply unit: 3.048 m = 10 ft. 82.6 mm (3 1/4 inch) and 114.3 mm
(4 1/2 inch) wide chains can be
supplied as R-types with a mini-
mum turn radius of 200 mm
(7.87 inch).
Please, note that the uni 879
chains are available both with tabs
and bevels.
P
P Curves are available for uni 879.
E L
E L Please, see curve catalogue.
H
TRAVEL H TRAVEL
K
mm inch
E 7.14 9/
32
Idlers: See page 86. All sprockets are supplied with pilot bore. Plastic sprockets are also available as two part 15.8 mm
sprockets: See page 84. The hub diameters mentioned in the table are valid for steel sprockets. Other teeth numbers 0.62 inch
and sprockets in stainless steel are available upon request.
23
Slat Top Chains uni 879 Super Flex
Plastic • Side flexing The chain is primarily used in
bottling plants and breweries
for transportation of plastic
Standard materials: Acetal D- bottles and cans.
grey or white, LF-brown and
SLF-dark grey. See page 8. uni 879 Super Flex chain has a
special design bearing shoe on
Special materials: See page 9. the underside. The SFL shoe
Pin material: 18/8 CrNi steel. ensures the chain is always held
The chain can be supplied with totally flat against the wear-
plastic pins. strips in curves. Its design also
Supply unit: 3.048 m = 10 ft. reduces vibrations. Therefore,
the problems with transporta-
tion of unstable
bottles and containers is mini-
mized.
Super Flex chains can be lifted
out of the carry wearstrips
P without the need for any tools.
L
E Curves are available for
uni 879 Super Flex.
Please, see curve catalogue.
TRAVEL H
mm inch
E 7.0 9/
32
G 46.0 1 27/32
H 17.5 11/
16
J 27.5 1 5/64
G Q J W L 7.5 19/
64
P 38.1 1 1/2
R Q 42.3 1 21/32
T 5.0 25/
128
T
All dimensions are for acetal
chains.
24
Slat Top Chains uni 879 TAB-G4
Plastic • Side flexing
The uni 879 TAB-G4 chain is
Standard materials: Acetal designed for vertical conveyors
D-white. where the items are conveyed
See page 8. between two uni Grip links.
Other materials upon request.
Standard rubber material:
Polyether block amides
(PEBAX).
Standard rubber colour: Black.
E 7.14 9/
32
D
GT (curve) 44.5 1 3/4
GT (straight) 46.0 1 13/16
H 15.9 5/
A 8
C
E I 75.0 2 61/64
J 61.5 2 27/64
L K 11.9 15/
32
P H
L 8.5 21/
64
K
TRAVEL P 38.1 1 1/2
Q 42.9 1 11/16
T 5.0 25/
128
uni 879 TAB-G4-K325 82.6 3 1/ 1.32 0.89 200 7.87 200 7.87 29 1.14 37.5 1.48
4
r
Two part sprockets for uni 879 TAB-G4: Please see page 84.
Solid plastic and steel sprockets are also available: Please see page 23.
25
Slat Top Chains uni 880
Plastic • Side flexing The uni 880 series has a wide
range of applications for trans-
portation of light weight items
Standard materials: Acetal D- in curves e.g. plastic bottles,
grey or white, LF-brown and
SLF-dark grey. See page 8. cans, cartons etc.
W Q G W J GT Q
mm inch
R R
E 7.14 9/
32
T T
G (curve) 41.3 1 5/8
G (straight) 44.5 1 3/4
BEVEL TAB
GT (curve) 44.5 1 3/4
GT (straight) 46.0 1 13/16
H 15.9 5/
8
J 61.5 2 27/64
K 11.9 15/
uni width W weight backflex radius min. radius R 32
uni 880-K250 63.5 2 1/2 0.80 0.54 75 3 400 15.75 P 38.1 1 1/2
uni 880-K325 82.6 3 1/4 0.89 0.60 75 3 400 15.75 Q 43.1 1 45/64
3 1/ T 4.0 5/
uni 880-K350 88.9 2 0.92 0.62 75 3 400 15.75 32
Idlers: See page 86. Sprockets for uni 880. Please see page 23.
26
Slat Top Chains uni 880 TAB-RT
Plastic • Side flexing The uni 880 TAB-RT has as the
uni 879 and uni 880 series a wide
range of applications for transpor-
Standard materials: Acetal D- tation of various food products and
grey or white, LF-brown and light weight items in curves e.g.
SLF-dark grey. See page 8. plastic bottles, cans, cartons etc.
The uni 880 TAB-RT chain is
Special materials: See page 9. identical to the uni 880 TAB-R
chain, but with different tab-
Pin material: 18/8 CrNi steel. dimensions, so that it can be used
The chains can be supplied with with a horizontal drive sprocket.
plastic pins. See drawing below.
Supply unit: 3.048 m = 10 ft. mm inch
E 7.14 9/
32
J 50.4 1 63/64
K 7.9 5/
16
P
L 7.5 19/
L E 64
P 38.1 1 1/2
H
Q 41.2 1 5/8
K
T 4.0 5/
32
TRAVEL
All dimensions are for acetal
chains.
Max. permissible tensile force
chain N lbf
J Q G W uni 880 TAB-RT 2250 500
T
R
mm inch
G Q J W E 7.0 9/
32
G 46.0 1 27/32
H 17.5 11/
R 16
J 27.5 1 5/64
L 7.5 19/
T 64
P 38.1 1 1/2
Q 42.3 1 21/32
uni width W weight backflex radius min. radius R T 4.0 5/
32
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft
28
Slat Top Chains uni 882
Plastic • Side flexing The uni 882 chain is a stronger
version of the uni 880-series
and it is available in widths up
Standard materials: Acetal D-
grey or white, LF-brown and to 304.8 mm (12 inch). The
SLF-dark grey. See page 8. high tensile force makes the
chain suitable for transportation
Special materials: See page 9.
of heavier and larger items than
Pin material: 18/8 CrNi steel. the uni 880 chain over longer
The chains can be supplied with distances.
plastic pins.
mm inch
E 8.7 11/
32
P 38.1 1 1/2
R
Q 60.5 2 3/8
T 5.0 25/
128
uni width W weight backflex radius min. radius R Max. permisible tensile force
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft chain N lbf
uni 882-K450 114.3 4 1/2 1.79 1.20 75 3 610 24.00 uni 882 4000 900
uni 882-K750 190.5 7 1/2 2.20 1.48 75 3 610 24.00
uni 882-K1000 254.0 10 2.52 1.69 75 3 610 24.00
uni 882-K1200 304.8 12 2.75 1.85 75 3 610 24.00
H
TRAVEL K mm inch
E 8.7 11/
32
J 76.2 3
K 17.5 11/
16
J GT Q W
L 9.5 3/
8
R P 38.1 1 1/2
Q 57.2 2 1/4
T 5.0 25/
128
uni width W weight backflex radius min. radius R Max. permissible tensile force
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft chain N lbf
uni 882 TAB-K450 114.3 4 1/ 1.92 1.29 75 3 610 24.00
2 uni 882 TAB 4000 900
uni 882 TAB-K750 190.5 7 1/2 2.34 1.57 75 3 610 24.00
uni 882 TAB-K1000 254.0 10 2.66 1.78 75 3 610 24.00 * For uni 882 TAB-K1500 and
uni 882 TAB-K1200 304.8 12 2.89 1.94 75 3 610 24.00 uni 882 TAB-K1600 we recom-
mend minimum turn radius 700
uni 882 TAB-K1500 381.0 15 3.07 2.06 75 3 700* 27.60* mm because of the chain width
uni 882 TAB-K1600 406.4 16 3.18 2.13 75 3 700* 27.60* and the danger of overlapping.
All sprockets are supplied with pilot bore. Plastic sprockets are also available as two part sprockets: See page 84. 42.3 mm
1.67 inch
The hub diameters mentioned in the table are valid for steel sprockets.
Other teeth numbers and sprockets in stainless steel are available upon request.
* Max. bore for 1-882-9 is 35 mm (1.38 inch) and hub diameter 65 mm (2.56 inch).
30
Special Chains uni 882 SC-TAB
Plastic • Side flexing
The uni 882 SC-TAB (Safety
Chain) is a closed version of
Standard materials: LF-brown. the uni 882 TAB chain.
See page 8.
The uni 882 SC-TAB is used
Special materials: See page 9.
where safety demands are high,
Pin material: 18/8 CrNi steel. i.e. for conveyors where per-
The chains can be supplied with sonnel work in close contact
plastic pins.
with the moving chain - pack-
Supply unit: 3.048 m = 10 ft. ing lines, catering conveyors
etc. The risk of conveyed prod-
ucts, loose clothes or fingers
being caught between the chain
links is reduced by the over-
T
lapping flights.
mm inch
B 9.7 25/
64
W Q GT J E 8.7 11/
32
J 76.2 3
K 17.5 11/
16
L 16.7 21/
32
TRAVEL K P 38.1 1 1/2
P
Q 57.2 2 1/4
B L H
T 7.0 9/
32
V V 29.0 1 9/64
E
All dimensions are for acetal
uni width W weight backflex radius min. radius R chains.
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft
uni 882 SC-TAB-K1000 254.0 10 3.38 2.27 125 5 610 24.00 uni 882 SC-TAB 4000 900
G Q W mm inch
B 7.0 9/
32
L 13.5 17/
32
P 50.0 1.97
T Q 82.0 3 15/64
T 6.5 1/
4
H
V 24.0 15/
16
32
Special Chains uni 880 Rib
Plastic • Side flexing The uni 880 Rib chain has the
uni 880 TAB as base chain and is
designed with ribs on top to make
Standard materials: LF-brown. the use of finger plates possible at
See page 8. the drive and idler stations in con-
nection with product transfer.
Special materials: See page 9.
uni 880 Rib is suitable for
Pin material: 18/8 CrNi steel. (slightly) larger items, which will
The chains can be supplied with
plastic pins. stand safely on the chain, and at
the transfer many problems will be
Supply unit: 3.048 m = 10 ft. avoided by using finger plates in-
stead of “fingerless dead plates”.
W Q G J mm inch
E 7.14 9/
32
R G (curve) 44.5 1 3/4
G (straight) 46.0 1 13/16
H 16.0 5/
8
K J 61.5 2 27/64
TRAVEL H K 11.9 15/
32
L 18.5 47/
64
P
P 38.1 1 1/2
E Q 42.9 1 11/16
L T
T 15.0 19/
V 32
V 31.1 1 7/32
33
Special Chains uni 880 Rib-Flex
Plastic • Side flexing Just as uni 880 Rib, the uni 880
Rib-Flex (base chain is
uni 880 TAB) is a side flexing
Standard materials: LF-brown. chain with ribs that can be used
See page 8.
with finger plates in connection
Special materials: See page 9. with transfers.
Pin material: 18/8 CrNi steel. Finger plates: See page 83.
The chains can be supplied with
plastic pins.
Compared to uni 880 Rib, the
Supply unit: 3.048 m = 10 ft. uni 880 Rib-Flex has a shorter
distance between the ribs which
ensures that smaller items such
as cans, cartons and bottles
stand stable on the chain.
mm inch
E 7.2 9/
32
R J 61.5 2 27/64
K K 11.9 15/
TRAVEL 32
H L 18.5 47/
P 64
T P 38.1 1 1/2
E L Q 42.9 1 11/16
V 19/
T 14.9 32
V 30.7 1 13/64
34
Special Chains
uni 882 Rib-Flex
Plastic • Side flexing
uni 882 Rib-Flex is designed
with ribs on the top surface of a
Standard materials: LF-brown. uni 882 TAB link so that it can
See page 8. be used with finger plates at the
Special materials: See page 9. drive and idler stations.
Pin material: 18/8 CrNi steel. Finger plates: See page 83.
The chains can be supplied with
plastic pins. uni 882 Rib-Flex is suitable for
cans, plastic bottles, cartons
Supply unit: 3.048 m = 10 ft. and other products in con-
nection with product transfer.
mm inch
E 8.7 11/
32
J 76.2 3
W Q G J K 17.5 11/
16
L 19.7 25/
32
R P 38.1 1 1/2
Q 57.2 2 1/4
T 15.0 19/
32
K
TRAVEL V 37.0 1 29/64
H
P All dimensions are for acetal
chains.
E T L
V Max. permissible tensile force
chain N lbf
uni 882 Rib-Flex 4000 900
uni width W weight backflex radius min. radius R
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft
22.2 mm
Sprockets for uni 882 Rib-Flex 0.87 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. cast iron diameter diameter diameter diameter
steel cast iron plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-882-9* 2-882-9 3-882-9 9 20.0 0.78 45.0 1.77 44.5 1 3/4 111.4 4.39 112.4 4.43 63.0 2.48 93.80 3.69
1-882-10 2-882-10 3-882-10 10 20.0 0.78 45.0 1.77 44.5 1 3/4 123.3 4.85 125.0 4.92 63.0 2.48 104.08 4.10
1-882-11 2-882-11 3-882-11 11 20.0 0.78 45.0 1.77 44.5 1 3/4 135.2 5.32 137.4 5.42 73.5 2.89 115.96 4.57
1-882-12 2-882-12 3-882-12 12 20.0 0.78 50.0 2.00 44.5 1 3/4 147.2 5.80 149.9 5.90 73.5 2.89 127.94 5.04
1-882-15 2-882-15 3-882-15 15 20.0 0.78 50.0 2.00 44.5 1 3/ 183.3 7.22 186.9 7.26 73.5 2.89 163.60 6.44
4
42.3 mm
All sprockets are supplied with pilot bore. Plastic sprockets are also available as two part sprockets: See page 84. 1.67 inch
The hub diameters mentioned in the table are valid for steel sprockets.
Other teeth numbers and sprockets in stainless steel are available upon request.
* Max. bore for 1-882-9 is 35 mm (1.38 inch) and hub diameter 65 mm (2.56 inch).
35
Special Chains uni 821-RO
Plastic • Straight running The uni 821-RO chain is a
straight running plastic chain.
The chain is related to the
Standard materials: LF-brown.
See page 8. uni 821-series with 5 rollers
mounted in the assembling
Special materials: See page 9. point making the chain suitable
Pin material: 18/8 CrNi steel. for accumulation of products. If
the chain is running on a fixed
Supply unit: 3.048 m = 10 ft. plate, the items will accelerate
compared to the chain. This is
suitable for items which have to
keep a certain mutual distance.
mm inch
E 6.35 1/
4
G 140.0 5 33/64
Z G Q W 3/
H 9.5 8
E 5/
L 8.0 16
M 9.5 3/
8
P 38.1 1 1/2
Q 136.5 5 3/8
T 5.0 25/
128
V 19.0 3/
4
Sprockets are supplied with pilot bore. Other teeth numbers and sprockets in stainless steel are 135 mm
available upon request. 5.31 inch
36
Special Chains uni 821 PRR
Plastic • Straight running The uni 821 PRR chain is
double hinged with pressure
reduction rollers. It has the
Standard materials: LF-brown.
See page 8. straight running uni 821 chain
as base chain.
Special materials: See page 9.
The chain is suitable for appli-
Pin material: 18/8 CrNi steel. cation where accumulation of
Axle materials for accumulation long items occurs or for items
rollers: 18/8 CrNi steel SS or pla- that should not be damaged by
stic. the accumulation pressure.
Supply unit: 3.048 m = 10 ft. Rollers with free rotation on
their axles are mounted on the
upper surface of the chain. The
axles for the rollers can be sup-
plied in both stainless steel and
plastic.
The chain with plastic axles for
the rollers is distinguished by a
very low weight.
W I Q G
mm inch
E 6.35 1/
4
G 140.0 5 33/
64
H 9.5 3/
8
P 38.1 1 1/2
V L T Q 136.5 5 3/8
T 19.0 3/
H 4
E P
V 28.5 1 1/8
uni width W weight backflex radius All dimensions are for acetal
reference no. mm inch kg/
m
lbs/
ft mm inch chains.
uni 821 PRR SS-K750 190.5 7 1/2 5.1 3.43 225 9
Max. permissible tensile force
uni 821 PRR SS-K1000 254.0 10 7.1 4.77 225 9
chain N lbf
uni 821 PRR SS-K1200 304.8 12 8.3 5.60 225 9
uni 821 PRR 3000 675
mm inch
E 8.7 11/
32
K J 73.0 2 7/8
TRAVEL
K 17.5 11/
H 16
L 23.5 59/
64
L T E
V P 38.1 1 1/2
Q 57.2 2 1/4
T 19.0 3/
4
P
V 41.2 1 5/8
uni width W weight backflex radius min. radius R All dimensions are for acetal
reference no. mm inch kg/ lbs/ mm inch mm inch
chains.
m ft
uni 882 PRR-TAB SS-K375 95.3 3 3/4 3.4 2.28 101 4 610 24.00
Max. permissible tensile force
uni 882 PRR-TAB SS-K450 114.3 4 1/2 3.9 2.62 101 4 610 24.00
chain N lbf
uni 882 PRR-TAB SS-K750 190.5 7 1/2 5.6 3.76 101 4 610 24.00
uni 882 PRR-TAB 4000 900
G 23.8 15/
16
H 11.5 29/
64
L 9.1 23/
G Q W 64
P 12.7 1/
2
Q 19.1 3/
4
T 3.2 1/
8
* uni 843/-K138, -K144, -K175, -K200 and -K250 are supplied in boxes with
2 x 3.048 m (2 x 10 ft).
The roller base chain can be supplied in both stainless steel and hardened carbon
steel.
39
Snap-On Chains uni SK843
Plastic • Straight running uni SK843 is a straight running
Snap-On chain.
Standard flight materials:
Acetal D-grey or white, LF- The uni SK843 chain is desig-
brown, SLF-dark grey and ned with plastic flights assem-
polycarbonate (PC) grey. bled on a special roller chain
See page 8 and 9.
with extended pins.
mm inch
E 4.0 5/
G Q W 32
G 23.8 15/
16
H 11.5 29/
64
L 9.1 23/
64
P 12.7 1/
2
Q 19.1 3/
4
T 3.2 1/
8
40
Snap-On Chains uni 863/963 and
Plastic • Straight running uni 863 TAB/963 TAB
The straight running
Standard flight materials: uni 863/963 and uni 863 TAB/
Acetal D-grey or white, LF- 963 TAB chains are designed with
brown, SLF-dark grey and
polycarbonate (PC) grey. overlapping plastic flights assem-
See page 8 and 9. bled on a special roller chain with
extended pins. This is an advan-
tage especially at high speeds.
The Snap-On chains are very suit-
able for the food processing
TRAVEL TRAVEL industry.
P P
P P
T T
The uni 863 chain has a 3/4 inch
L uni 863 L straight running roller base
H K H uni 863 TAB
E
chain where the 963 chain has a
E 3/ inch side flexing roller base
P1 P2 4
P1 P2
T
T
chain. The plastic flights can be
H L uni 963 L supplied in widths from 82.5 mm
E
K H uni 963 TAB (3 1/4 inch) to 190.5 mm
E
(7 1/2 inch). The uni 863 chain has
far the best straight running pro-
perties.
G Q W
J G Q W
mm inch
uni 863/963 E (863) 6.0 15/
uni 863 TAB/963 TAB 64
G 36.5 1 7/16
uni reference no. width weight backflex G (TAB) 37.9 1 31/64
H 18.6 47/
base chain base chain W radius 64
uni 863 TAB/963 TAB-K450 uni 863 TAB/963SS TAB-K450 114.3 4 1/2 2.37 1.59 150 6 Q (TAB) 31.9 1 1/4
T 4.0 5/
32
uni 863 TAB/963 TAB-K500 uni 863 TAB/963SS TAB-K500 127.0 5 2.41 1.62 150 6
uni 863 TAB/963 TAB-K1000 uni 863 TAB/963SS TAB-K1000 254.0 10 3.17 2.13 150 6 All dimensions are for acetal
chains.
The flights can be supplied loose or assembled on roller chains in lengths of
3.048 m (10 ft).
The roller base chain can be supplied in both stainless steel and hardened carbon
steel.
Sprockets for uni 863/963 and uni 863 TAB/963 TAB: See page 85. Max. permissible tensile force
chain N lbf
uni 863 5500 1200
uni 863SS 2700 600
uni 963 4000 900
uni 963SS 2000 450
41
Snap-On Chains uni 1873 ST
Plastic • Straight running
The uni 1873 ST is a straight
running Snap-On chain. The
Standard flight materials: uni 1873 ST chain is designed
Acetal D-grey or white, LF- with plastic flights with tabs as-
brown, SLF-dark grey and
polycarbonate (PC) grey. sembled on a special roller
See page 8 and 9. chain with extended pins.
E
H
TRAVEL
K
mm inch
E 5.1 13/
64
G 34.9 1 3/8
H 25.0 63/
64
J 54.4 2 9/64
J G Q W 9/
L 14.3 16
P1 18.1 0.71
P2 20.1 0.79
Q 31.8 1 1/4
T 4.0 5/
32
V 29.0 1 9/64
Roller chain: 3/4 inch (19.05 mm) pitch, can be supplied in both stainless steel and
hardened carbon steel.
42
Snap-On Chains uni 1843
Plastic • Side flexing The side flexing uni 1843
Snap-On chain is designed with
overlapping plastic flights
Standard flight materials: assembled on a special roller
Acetal D-grey or white, LF-
brown, SLF-dark grey and chain with extended pins.
polycarbonate (PC) grey.
See page 8 and 9. This is an advantage especially
at high speeds.
The Snap-On chains are very
suitable for the food industry.
mm inch
E 3.6 9/
64
J G Q W G (curve) 22.0 55/
64
H 13.8 35/
64
R
J 31.4 1 15/64
K 10.8 27/
64
L 9.3 23/
64
uni reference no. width W weight backflex min.
P 12.7 1/
2
base chain radius radius R
Q 19.8 25/
kg/ lbs/ 32
steel mm inch m ft mm inch mm inch
T 3.3 1/
8
uni 1843-K125 31.5 1 1/4 0.83 0.56 155 6 7/64 254 10
V 17.1 43/
64
uni 1843-K150 37.9 1 1/2 0.85 0.57 155 6 7/64 254 10
uni 1843-K200 50.6 2 0.90 0.60 155 6 7/64 254 10 All dimensions are for acetal
uni 1843-K325 82.6 3 1/4 1.02 0.69 155 6 7/64 254 10 chains.
The flights can be supplied loose or assembled on roller chains in lengths of Max. permissible tensile force
3.048 m (10 ft).
The roller base chain can be supplied in hardened carbon steel. chain N lbf
uni 1843 2000 450
The Snap-On sprockets are supplied in steel, but can also be supplied in 18/8 CrNi steel on request.
43
Snap-On Chains uni 1873
Plastic • Side flexing The uni 1873 chain is a side
flexing Snap-On chain de-
signed with plastic flights
Standard flight materials:
Acetal D-grey or white, LF- assembled on a special roller
brown, SLF-dark grey and chain with extended pins. This
polycarbonate (PC) grey. is an advantage especially for
See page 8 and 9.
high speeds.
mm inch
E 5.1 13/
64
R L 14.3 9/
16
P1 18.1 0.71
P2 20.1 0.79
Q 31.8 1 1/4
T 4.0 5/
32
V 29.0 1 9/64
uni reference no. width W weight backflex min.
base chain radius radius R All dimensions are for acetal
steel stainless steel mm inch kg/ lbs/ mm inch mm inch
chains.
m ft
uni 1873-K250 uni 1873SS-K250 63.5 2 1/2 2.00 1.34 150 6 356 14 Max. permissible tensile force
uni 1873-K325 uni 1873SS-K325 82.6 3 1/ 2.10 1.41 150 6 356 14 chain N lbf
4
uni 1873-K450 uni 1873SS-K450 114.3 4 1/2 2.26 1.52 150 6 356 14 uni 1873 4000 900
uni 1873-K600 uni 1873SS-K600 152.4 6 2.41 1.62 150 6 457 18 uni 1873SS 2000 450
uni 1873-K750 uni 1873SS-K750 190.5 7 1/ 2.56 1.72 150 6 457 18
2
Roller chain: 3/4 inch (19.05 mm) pitch, can be supplied in both stainless steel and
hardened carbon steel.
44
Snap-On Chains uni 1873 SE
Plastic • Side flexing The uni 1873 SE chain is a side
flexing Snap-On chain.
uni 1873 SE is designed with
Standard flight materials:
Acetal D-grey or white, LF- plastic flights assembled on a
brown, SLF-dark grey and special roller chain with ex-
polycarbonate (PC) grey. tended pins.
See page 8 and 9.
This is an advantage especially
at high speeds.
The Snap-On chains are very
suitable for the food processing
industry.
mm inch
A 14.4 11/
J G Q W 16
E 5.1 13/
64
J 54.4 2 9/64
K 21.0 53/
64
L 14.3 9/
16
P1 18.1 0.71
P2 20.1 0.79
Q 31.8 1 1/4
uni reference no. width W weight backflex min. 5/
T 4.0 32
base chain radius radius R
V 29.0 1 9/64
steel stainless steel mm inch kg/ lbs/ mm inch mm inch
m ft
uni 1873 SE-K1200 uni 1873 SE SS-K1200 304.8 12 3.54 2.37 150 66 457 18 All dimensions are for acetal
chains.
The flights can be supplied loose or assembled on roller chains in lengths of
3.048 m (10 ft).
Max. permissible tensile force
Roller chain: 3/
inch (19.05 mm) pitch, can be supplied in both stainless steel and chain N lbf
4
hardened carbon steel. uni 1873 SE 4000 900
Sprockets for Snap-On chains: See page 85. uni 1873 SE SS 2000 450
45
Snap-On Chains uni 3873
Plastic • Side flexing The uni 3873 chain is a side
flexing Snap-On chain de-
signed with overlapping flights
Standard flight materials:
Acetal D-grey or white, LF- assembled on a special roller
brown, SLF-dark grey and chain with extended pins. This
polycarbonate (PC) grey. is an advantage especially at
See page 8 and 9.
high speeds.
The Snap-On chains are very
suitable for the food processing
industry.
mm inch
E 5.1 13/
W Q G J 64
J 54.2 2 9/64
K 21.0 53/
64
L 16.6 21/
32
P1 18.1 0.71
P2 20.1 0.79
T
Q 31.8 1 1/4
L V 17/
T 6.6 64
P1 P2 E V 32.0 1 17/64
uni 3873-K1000 uni 3873SS-K1000 254.0 10 3.47 2.33 150 6 400 16 Max. permissible tensile force
chain N lbf
The flights can be supplied loose or assembled on roller chains in lengths of
uni 3873 4000 900
3.048 m (10 ft).
uni 3873SS 2000 450
Roller chain: 3/4 inch (19.05 mm) pitch, can be supplied in both stainless steel and
hardened carbon steel.
46
uni Grip 1873-G4/
1873-G4L/1873-G3
The uni Grip chain is designed
for vertical conveyors where
the items are conveyed between
two uni Grip links.
The uni Grip is a uni 1873
chain supplied with moulded
rubber inserts.
mm inch
I W D (G4) 9.0 23/
64
D (G4L) 8.0 5/
16
E 5.1 13/
L 64
47
Snap-On Chains uni Grip 1873-D
Plastic • Side flexing The uni Grip chain 1873-D is
designed for vertical conveyors
where the items are conveyed
Standard flight materials:
LF-brown. between two uni Grip links.
See page 8 and 9.
Main application for uni Grip
Standard rubber material:
Polyether block amides. 1873-D is vertical conveying of
(PEBAX). See page 73. containers.
Standard rubber colour: Black.
Other colours can be supplied The chain link for uni 1873-D
on request. is the Snap-On type. The
uni Grip chains have a 3/4 inch
Rubber materials: See page 73. side flexing roller base chain.
mm inch
E 5.1 13/
64
L 10.3 13/
32
N 29.6 1 11/64
V 30.0 1 3/16
The flights can be supplied loose or assembled on roller chains in lengths of
3.048 m (10 ft). All dimensions are for acetal
chains.
Roller chain: 3/4 inch (19.05 mm) pitch, can be supplied in both stainless steel and
hardened carbon steel.
Max. permissible tensile force
Sprockets for Snap-On chains: See page 85. chain N lbf
uni 1873-D 4000 900
uni 1873-D SS 2000 450
48
uni Flex Chains uni 1700
Plastic • Side flexing The uni 1700 chain is a uni Flex
chain flexible in several directions.
P 50.0 1.97
T 3.1 1/
8
V 24.0 15/
16
chain N lbf
uni 1700 4000 900
11.0 mm
Sprockets for uni 1700 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
49
uni Flex Chains uni 1701
Plastic • Side flexing The uni 1701 chain is a
uni Flex chain flexible in sever-
al directions.
Standard materials: Acetal D-
grey or white, LF-brown and
SLF-dark grey. See page 8. The uni 1701 chain is provided
with 8° tapered sides.
Special materials: See page 9.
P
mm inch
T 5/
E 8.0 16
E P 50.0 1.97
Q 58.4 2 19/64
T 3.9 5/
32
V 25.0 63/
64
11.0 mm
Sprockets for uni 1701 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
50
uni Flex Chains uni 1701 TAB
Plastic • Side flexing The uni 1701 TAB chain is a
uni Flex chain, flexible in
several directions.
Standard materials: Acetal D-
grey or white, LF-brown and The uni 1701 TAB chain has
SLF-dark grey. See page 8.
straight sides and hold down
Special materials: See page 9. tabs. The uni 1701 TAB chain
is excellent for running in
Pin materials: 18/8 CrNi steel.
curves and for serpentine con-
Supply unit: 6.1 m = 20 ft. veyors.
J 66.7 2 5/8
E P 50.0 1.97
T 3.9 5/
32
V 25.0 63/
64
11.0 mm
Sprockets for uni 1701 TAB 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
51
uni Flex Chains uni 1701 TAB-R ST
Plastic • Side flexing (Steel Top)
Standard uni Flex 1701 TAB-R
Standard materials: Acetal D- chain fitted with stainless steel
grey or white, LF-brown and top cover (thickness 1 mm
SLF-dark grey. See page 8. (1/32 inch)).
Special materials: See page 9. The steel top cover offers extra
resistance to wear in applica-
Pin materials: 18/8 CrNi steel. tions where product accumula-
Supply unit: 6.1 m = 20 ft. tion occurs.
Applications:
Transfer of metal components
between machines in automo-
H
tive industry.
Loaded pallet transportation
systems.
mm inch
W GT J 5/
E 8.0 16
P P 50.0 1.97
V 26.0 1/
64
11.0 mm
Sprockets for uni 1701 TAB-R ST 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
52
uni Flex Chains uni 1702
Plastic • Side flexing The uni 1702 chain is a
uni Flex chain, flexible in
several directions.
Standard materials: Acetal D-
grey or white, LF-brown and
SLF-dark grey. See page 8. The uni 1702 chain has straight
sides but is also suitable for
Special materials: See page 9.
running in curves if the curves
Pin materials: 18/8 CrNi steel. are provided with tapered sides.
Supply unit: 6.1 m = 20 ft.
The chain can always be taken
off the curve section for clean-
ing.
mm inch
TRAVEL
E 8.0 5/
16
P 50.0 1.97
T 3.5 9/
64
V 25.0 63/
64
11.0 mm
Sprockets for uni 1702 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
53
uni Flex Chains uni 1702 M
Plastic • Side flexing The uni 1702 M chain is a
uni Flex chain, flexible in several
directions.
Standard materials: Acetal D-
grey or white, LF-brown and The uni 1702 M chain has straight
SLF-dark grey. See page 8. sides but is also suitable for
running in curves if the curves are
Standard material for pegs: provided with tapered sides.
Acetal D-grey or white.
The chain can always be taken off
Special materials: See page 9. the curve section for cleaning.
Pin materials: 18/8 CrNi steel.
The uni 1702 M is supplied with
Supply unit: 6.1 m = 20 ft. pegs - which function as product
supports.
I 12.0 15/
32
E L 12.7 1/
2
P 50.0 1.97
T 3.5 9/
64
uni width W weight backflex radius min. radius R 1 43/64
VM 42.5
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft
All dimensions are for acetal
uni 1702 M 53.3 2 3/32 2.30 1.55 125 5 150 6 chains.
11.0 mm
Sprockets for uni 1702 M 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
54
uni Flex Chains uni 1702 H
Plastic • Side flexing The uni 1702 H chain is a
uni Flex chain, flexible in several
directions.
Standard materials: Acetal D-
grey or white, LF-brown and The uni 1702 H chain has straight
SLF-dark grey. See page 8. sides but is also suitable for
running in curves if the curves are
Standard material for crescent provided with tapered sides.
top plates: Acetal D-grey or
white and LF-brown.
The chain can also be taken off the
Special materials: See page 9. curve section for cleaning.
Pin materials: 18/8 CrNi steel. The uni 1702 H is supplied with
crescent plates - resulting in a lar-
Supply unit: 3.05 m = 10 ft. ger surface. Note the uni 1702 H
chain cannot backflex.
VH
The uni 1702 H is suitable for
carton transportation in the dairy
industry.
TH mm inch
E 8.0 5/
16
TRAVEL
BH 98.0 3 55/64
G (curve) 56.9 2 1/4
G (straight) 59.0 2 21/64
L L 12.7 1/
2
P 50.0 1.97
E P TH 4.0 5/
32
VH 35.0 1 3/8
11.0 mm
Sprockets for uni 1702 H 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
55
uni Flex Chains uni 1703
Plastic • Side flexing The uni 1703 chain is a
uni Flex chain, flexible in
several directions.
Standard materials: Acetal D-
grey or white, LF-brown and
SLF-dark grey. See page 8. The uni 1703 chain has the
same outer dimensions as the
Special materials: See page 9.
uni 1702 chain. The uni 1703
Pin materials: 18/8 CrNi steel. chain is distinguished by its
open design.
Supply unit: 6.1 m = 20 ft.
This open design ensures op-
timum cleaning possibilities.
This is an advantage in
washing systems where the
conveyor can be rinsed
E through.
W G
Curves are available for uni
R 1703. Please, see curve cata-
logue.
TRAVEL
mm inch
T 5/
E 8.0 16
V 25.0 63/
64
uni width W weight backflex radius min. radius R Max. permissible tensile force
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft chain N lbf
uni 1703 53.3 2 3/32 1.43 0.96 75 3 150 6 uni 1703 3000 675
11.0 mm
Sprockets for uni 1703 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
56
uni Flex Chains uni 1704
Plastic • Side flexing The uni 1704 chain is a
uni Flex chain, flexible in
several directions.
Standard materials: Acetal D-
grey or white, LF-brown and
SLF-dark grey. See page 8. It is another addition to the
uni 1700 range corresponding
Special materials: See page 9.
to the uni 1702 chain apart
Pin materials: 18/8 CrNi steel. from height which is only
23.9 mm (15/16 inch) compared
Supply unit: 6.1 m = 20 ft.
to the uni 1702 chain which is
25 mm high.
TRAVEL
T mm inch
E 8.0 5/
16
V 23.9 15/
16
11.0 mm
Sprockets for uni 1704 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. plastic max. steel diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch mm inch
1-1700-8 3-1700-8 8 20.0 0.78 40.0 1.57 50.0 1.97 130.6 5.14 133.0 5.24 63.0 2.48 106.66 4.20
1-1700-10 3-1700-10 10 20.0 0.78 40.0 1.57 50.0 1.97 161.8 6.37 166.1 6.54 63.0 2.48 138.50 5.45
1-1700-12 3-1700-12 12 20.0 0.78 40.0 1.57 50.0 1.97 193.2 7.61 196.0 7.72 63.0 2.48 169.20 6.66
1-1700-13 3-1700-13 13 20.0 0.78 40.0 1.57 50.0 1.97 208.9 8.23 214.0 8.43 63.0 2.48 184.93 7.28
57
uni Flex Chains uni 2500
Plastic • Side flexing The uni 2500 chain is a
uni Flex chain, flexible in
several directions.
Standard materials: Acetal D-
grey or white, LF-brown and
SLF-dark grey. See page 8. The uni 2500 chain is a typical
crate conveyor chain and is also
Special materials: See page 9.
used for transportation of large
Pin materials: 18/8 CrNi steel. items.
Supply unit: 6.1 m = 20 ft.
The strong construction with
extra material thickness ensures
a large tensile force even after
considerable wear on the sides
and the top of the chain.
2°
Curves are available for uni
2500. Please, see curve cata-
G W Q logue.
R
E
mm inch
TRAVEL E 9.5 3/
8
11.0 mm
Sprockets for uni 2500 0.43 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch
1-2500-6 3-2500-6 6 20.0 0.78 40.0 1.57 127.0 5.00 139.0 5.47 63.0 2.48 87.00 3.43
1-2500-8 3-2500-8 8 20.0 0.78 40.0 1.57 165.9 6.53 176.0 6.93 73.5 2.89 125.00 4.92
1-2500-15 3-2500-15 15 20.0 0.78 40.0 1.57 305.4 12.02 317.4 12.50 73.5 2.89 265.42 10.45
58
uni Flex Chains uni 2600-C
Plastic • Side flexing The uni 2600-C chain is a
uni Flex chain, flexible in sev-
eral directions.
Standard materials: Acetal D-
grey or white, LF-brown and
SLF-dark grey. See page 8. The uni 2600 chains are usually
used for transportation of crates
Special materials: See page 9.
and other large items.
Pin materials: 18/8 CrNi steel.
The uni 2600 chains are con-
Supply unit: 6.1 m = 20 ft.
structed, so that all types can
run in both directions.
T mm inch
E 11.0 7/
16
V G (curve) 44.4 1 3/4
G (straight) 45.9 1 13/16
P P 63.5 2 1/2
T 3.5 9/
64
V 28.4 1 1/8
59
uni Flex Chains uni 2600 TAB-C
Plastic • Side flexing The uni 2600 TAB-C chain is a
uni Flex chain, flexible in sev-
eral directions.
Standard materials: Acetal D-
grey or white, LF-brown and
SLF-dark grey. See page 8. The uni 2600 chains are usually
used for transportation of crates
Special materials: See page 9.
and other large items.
Pin materials: 18/8 CrNi steel.
The uni 2600 chains are con-
Supply unit: 6.1 m = 20 ft.
structed, so that all types can
run in both directions.
J 54.0 2 1/8
P
P 63.5 2 1/2
T 3.5 9/
64
V 28.4 1 1/8
60
uni Flex Chains uni 2600-O
Plastic • Side flexing
The uni 2600-O chain is a
uni Flex chain, flexible in sev-
Standard materials: Acetal D- eral directions.
grey or white, LF-brown and
SLF-dark grey. See page 8.
The uni 2600 chains are usually
Special materials: See page 9. used for transportation of crates
and other large items.
Pin materials: 18/8 CrNi steel.
V mm inch
E 11.0 7/
16
61
uni Flex Chains uni 2600 TAB-O
Plastic • Side flexing
The uni 2600 TAB-O chain is a
uni Flex chain flexible in sev-
Standard materials: Acetal D- eral directions.
grey or white, LF-brown and
SLF-dark grey. See page 8.
The uni 2600 chains are usually
Special materials: See page 9. used for transportation of crates
and other large items.
Pin materials: 18/8 CrNi steel.
TRAVEL
mm inch
E 11.0 7/
V 16
J 54.0 2 1/8
P 63.5 2 1/2
V 28.4 1 1/8
uni width W weight backflex radius min. radius R All dimensions are for acetal
reference no. mm inch kg/
m
lbs/
ft mm inch mm inch chains.
uni 2600 TAB-O 42.0 1 21/32 1.10 0.74 75 3 600 24
Max. permissible tensile force
chain N lbf
uni 2600 TAB-O 6000 1350
62
uni Flex Chains uni 2600 TAB-O-M
Plastic • Side flexing
The uni 2600 TAB-O-M chain is a
uni Flex chain, flexible in several
Standard materials: Acetal D- directions.
grey or white, LF-brown and
SLF-dark grey. See page 8. The uni 2600 chains are usually
used for transportation of crates
Special materials: See page 9. and other large items.
Pin materials: 18/8 CrNi steel. uni 2600 TAB-O-M is supplied
with a moulded “product support”.
Supply unit: 6.1 m = 20 ft. Placing of M product supports at
different chain pitches to customer
request.
On ordering, please, state the re-
quired distance between the
H
M product supports.
E
The uni 2600 chains are construc-
ted, so that all types can run in
both directions.
W G J
For use in extremely wearing or
corrosive surroundings the
R
uni 2600 chains are often supplied
in special materials GR and AR.
TRAVEL
F Curves are available for
uni 2600 TAB-O-M. Please, see
curve catalogue.
R
mm inch
E 11.0 7/
P 16
F 5.6 7/
32
J 54.0 2 1/8
uni width W weight backflex radius min. radius R 2 1/2
P 63.5
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft V 28.4 1 1/8
uni 2600 TAB-O-M 42.0 1 21/32 1.42 0.96 75 3 600 24
All dimensions are for acetal
chains.
Max. permissible tensile force
chain N lbf
uni 2600 TAB-O-M 6000 1350
63
uni Flex Chains uni 2700
Plastic • Side flexing
The uni 2700 chain is a
uni Flex chain, flexible in sev-
Standard materials: Acetal D- eral directions.
grey or white, LF-brown and
SLF-dark grey. See page 8.
The uni 2700 chains are desig-
Special materials: See page 9. ned for transportation of very
heavy items over long distan-
Pin materials: 18/8 CrNi steel.
ces. They have extremely high
Supply unit: 5.04 m = 16.5 ft. tensile force and good wear-
ability.
mm inch
E 12.0 15/
32
uni width W weight backflex radius min. radius R uni 2700 11000 2475
42.3 mm
1.67 inch
64
uni Flex Chains uni 2700 H
Plastic • Side flexing
The uni 2700 chains are desig-
ned for transportation of very
Standard materials: Acetal D- heavy items over long distances.
grey or white, LF-brown and They have extremely high ten-
SLF-dark grey. See page 8.
sile force and good wearability.
Standard materials for crescent
top plates: Acetal D-grey or The uni 2700 H-R chain is
white, LF-brown and SLF-dark designed with a very low turn
grey. radius for use of turn discs, and
Special materials: See page 9. the uni 2700 H chain is desig-
ned with crescent top plates to
Pin materials: 18/8 CrNi steel. give a completely closed sur-
Supply unit: 5.04 m = 16.5 ft. face.
Straight
Note that the uni 2700 H cannot
TH
backflex.
mm inch
W BH J G BH 138.0 5 7/16
E 12.0 15/
R 32
VH 56.4 2 7/32
2°
Max. permissible tensile force
chain N lbf
42.3 mm
1.67 inch
65
uni Flex Chains uni 2700 LH
Plastic • Side flexing
uni 2700 LH is made with cres-
cent top plates to give a com-
Standard materials: Acetal D- pletely closed surface.
grey or white, LF-brown and
SLF-dark grey. See page 8.
The crescents for uni 2700 LH
Special materials: See page 9. are especially large to be sui-
table for transportation of pro-
Standard material for crescent
top plates: Polyamid. See page ducts with demands for a large
9. even surface.
Standard colours: White and Please, note that uni 2700 LH
black.
cannot backflex.
Pin materials: 18/8 CrNi steel.
J 57.0 2 1/4
K 19.0 3/
W BH J G 4
LH 38.9 1 17/32
R
P 70.0 2.76
VH 65.9 2 19/32
P 2°
Curve
66
uni Flex Chains uni 1400/1400 TAB
Plastic • Side flexing
The uni 1400 chain is a typical
crate conveyor chain.
Standard materials: Acetal D-
grey or white, LF-brown and The uni 1400 is designed with
SLF-dark grey. See page 8. uni 1400
extra material thickness to work
Special materials: See page 9. in surroundings with conside-
rable wear on the chain.
Pin materials: 18/8 CrNi steel.
Supply unit: 6.1 m = 20 ft. Note that the uni 1400 chain
can only run in one direction.
uni 1400 TAB
Curves are available for
uni 1400/1400 TAB. Please, see
curve catalogue.
W G
R
P
uni 1400 mm inch
7/
TRAVEL E 11.0 16
E J 66.0 2 19/32
P 82.5 3 1/4
V 38.0 1 1/2
R Max. permissible
mm tensile force
inch
chain N lbf
TRAVEL H
uni 1400 8000 1800
E
uni 1400 TAB 8000 1800
uni 1400 TAB
15.0 mm
Sprockets for uni 1400 0.59 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch
1-1400-6 3-1400-6 6 20.0 0.78 40.0 1.57 165.0 6.50 177.0 6.97 63.0 2.48 125.56 4.94
1-1400-8 3-1400-8 8 20.0 0.78 50.0 2.00 215.6 8.49 227.6 8.96 73.5 2.89 176.72 6.96
1-1400-10 3-1400-10 10 20.0 0.78 50.0 2.00 267.0 10.51 279.0 10.98 73.5 2.89 228.48 9.00
W G mm inch
E 9.5 3/
R 8
J 67.4 2 21/32
V P 82.5 3 1/4
V 37.3 1 15/32
P
All dimensions are for acetal
E H chains.
Max. permissible
mm tensile force
inch
W G J chain N lbf
15.0 mm
Sprockets for uni 2800 0.59 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch
1-2800-6 3-2800-6 6 20.0 0.78 40.0 1.57 165.0 6.50 177.0 6.97 63.0 2.48 125.56 4.94
1-2800-8 3-2800-8 8 20.0 0.78 50.0 2.00 215.6 8.49 227.6 8.96 73.5 2.89 176.72 6.96
1-2800-10 3-2800-10 10 20.0 0.78 50.0 2.00 267.0 10.51 279.0 10.98 73.5 2.89 228.48 9.00
E mm inch
W G 7/
E 11.0 16
G 78.0 3 5/64
P 66.3 2 39/64
P V 28.6 1 1/8
15.0 mm
Sprockets for uni NH78 0.59 inch
uni no. bore pitch overall hub bottom
reference no. of min. max. diameter diameter diameter diameter
steel plastic teeth mm inch mm inch mm inch mm inch mm inch mm inch
1-NH-6 3-NH-6 6 20.0 0.78 40.0 1.57 132.5 5.21 142.5 5.61 65.0 2.56 110.32 4.34
1-NH-8 3-NH-8 8 20.0 0.78 40.0 1.57 173.2 6.82 183.2 7.21 65.0 2.56 150.95 5.94
1-NH-10 3-NH-10 10 20.0 0.78 50.0 2.00 214.4 8.44 224.4 8.83 73.5 2.89 192.23 7.57
69
uni Flex Chains uni 3000
Plastic • Side flexing
The uni 3000 chain is a
uni Flex chain, flexible in
Standard materials: Acetal D- several directions.
grey or white, LF-brown and
SLF-dark grey. See page 8.
The uni 3000 chain is designed
Special materials: See page 9. for transportation of very heavy
items over long distances. It
Pin materials: 18/8 CrNi steel.
has extremely high tensile
Supply unit: 6.1 m = 20 ft. force and good wearability.
mm inch
E 12.1 31/
64
G 104.0 4 3/32
J 110.0 4 21/64
E
L 28.4 1 1/8
W G J
P 80.1 3 5/32
T 9.0 23/
64
V 52.0 2 3/64
42.3 mm
1.67 inch
70
uni Flex Chains uni 3200
Plastic • Straight running
uni 3200 is the classic straight
running chain for heavy duty
Standard materials: Acetal transport at high speeds. It has
D-grey. See page 8. been developed especially to
Special materials: See page 9. meet the requirements of the
poultry industry but is suitable
Pin materials: 18/8 CrNi steel. for all kinds of applications
Supply unit: 6.1 m (20 ft). where a strong, impact resistant
chain is needed.
E
mm inch
E 6.35 1/
4
W G
G 59.5 2 11/32
P 50.8 2
V 20.3 51/
TRAVEL 64
V
Max. permissible tensile force
P
chain N lbf
uni 3200 3150 710
uni width W weight backflex radius
reference no. mm inch kg/ lbs/ mm inch
m ft
Tooth width:
25 mm (0.98 inch).
Width of sprockets:
42.3 mm (1.67 inch).
71
uni Flex Chains uni 3200 TAB
Plastic • Side flexing
uni 3200 TAB is the classic
side flexing tab chain for heavy
Standard materials: Acetal
D-grey. See page 8. duty transport at high speeds. It
has been developed especially
Special materials: See page 9. to meet the requirements of the
Pin materials: 18/8 CrNi steel. poultry industry but is suitable
for all kinds of applications
Supply unit: 6.1 m (20 ft). where a strong, impact resistant
chain is needed.
H
E
mm inch
E 6.35 1/
4
G 59.5 2 11/32
W G J
J 69.9 2 3/4
R H 13.8 35/
64
TRAVEL P 50.8 2
V 20.3 51/
64
V
P
Max. permissible tensile force
chain N lbf
uni width W weight backflex radius min. radius R
uni 3200 TAB 2525 570
reference no. mm inch kg/ lbs/ mm inch mm inch
m ft
Tooth width:
25 mm (0.98 inch).
Width of sprockets:
72 42.3 mm (1.67 inch).
Chains with Moulded Rubber Inserts Inserts
Rubber Materials
hardness
Material shore A shore D
Ethylene-vinylacetate-copolymers (EVA) 92 33
Ethylenpropylene dien terpolymer and polypropylene (Santoprene) 64 -
Polyether ester (PUR) 85 36
Polyether block amides (PEBAX) 75 29
Multibase 55 -
temperature range
Material °C °F
Ethylene-vinylacetate-copolymers (EVA) -40 to +70°C -40 to +158°F
Ethylenpropylene dien terpolymer and polypropylene (Santoprene) -40 to +125°C -40 to +257°F
Polyether ester (PUR) -20 to +80°C -4 to +176°F
Polyether block amides (PEBAX) -40 to +80°C -40 to +176°F
Multibase -40 to +50°C -40 to +122°F
73
Chains with Moulded Rubber Inserts Inserts for Series
uni 820/831 and
uni 821
Standard material: Polyether ester (PUR) which has the F.D.A. approval.
Standard material for base chain: Acetal LF-brown. The standard size and type of
insert are stated in the tables as
I1 I2 I3 I4 the R-type.
2.5 2.5 10 1
10 8
1 15 The tables below show availa-
ble lengths of the inserts.
I5 I6 I7
1
The other lengths and types of
20 2 2
15 15 inserts can be supplied upon
request.
Type of inserts I1 I2 I3 I4 I5 I6 I7
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
uni 820/831-K250 12/30 0.47/1.18 - - - - - - - - - - - -
uni 820/831-K325 12/30 0.47/1.18 - - 60 2.36 - - 70 2.76 - - - -
R10 60 2.36
uni 820/831-K350 12/30 0.47/1.18 - - 60/75 2.36/2.95 - - 70 2.76 - - - -
R10 60 2.36
uni 820/831-K400 12/30 0.47/1.18 - - 60/75 2.36/2.95 - - 70 2.76 - - - -
R11 60/90 2.36/3.54
uni 820/831-K450 12/30 0.47/1.18 - - 60/75 2.36/2.95 - - 70 2.76 - - 100 3.94
60/90 2.36/3.54 108 4.25
R12 105 4.13
uni 820/831-K600 12/30 0.47/1.18 - - 60/75 2.36/2.95 140 5.11 70/140 2.76/5.11 - - 100 3.94
60/90 2.36/3.54 108/140 4.25/5.11
R13 105/130 4.13/5.12
uni 820/831-K750 12/30 0.47/1.18 - - 60/75 2.36/2.95 140 5.11 70/140 2.76/5.11 - - 100 3.94
60/90 2.36/3.54 108/140 4.25/5.11
105/130 4.13/5.12
R14 170 6.69
Type of inserts I1 I2 I3 I4 I5 I6 I7
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
uni 821-K750 12/30 0.47/1.18 - - 60/75 2.36/2.95 140 5.11 70 2.76 - - 100 3.94
60/90 2.36/3.54 108/140 4.25/5.11
105/130 4.13/5.12
R14 170 6.69
uni 821-K1000 12/30 0.47/1.18 - - 60/75 2.36/2.95 140/200 5.11/7.87 70/140 2.76/5.11 250 9.84 100/235 3.94/9.25
60/90 2.36/3.54 108/140 4.25/5.11 200 7.87
105/130 4.13/5.12 200 7.87
R15 170/200 6.69/7.87
uni 821-K1200 R16 12/30 0.47/1.18 295 11.61 60/75 2.36/2.95 140/200 5.11/7.87 70/140 2.76/5.11 250 9.84 100/235 3.94/9.25
60/90 2.36/3.54 108/140 4.25/5.11 200 7.87
105/130 4.13/5.12 200/290 7.87/11.42
170/200 6.69/7.87
74
Chains with Moulded Rubber Inserts Inserts for Series
uni 879/880 and
uni 843
Standard material: Polyether ester (PUR) which has the F.D.A. approval.
Standard material for base chain: Acetal LF-brown. The standard size and type of
insert are stated in the tables as
the R-type.
I1 I2 I3 I4
2.5 2.5
1
10 1 15
The tables below show availa-
10 8 ble lengths of the inserts.
I5 I6 I7
The other lengths and types of
1 20 2 15
2 inserts can be supplied upon
15
request.
Type of inserts I1 I2 I3 I4 I5 I6 I7
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
uni 879/880 TAB-K250R 12/30 0.47/1.18 - - - - - - - - - - - -
uni 879/880 TAB-K250 12/30 0.47/1.18 - - - - - - - - - - - -
uni 879/880 TAB-K325R 12/30 0.47/1.18 - - 60 2.36 - - - - - - - -
60 2.36
uni 880 TAB-K325RT 12/30 0.47/1.18 - - 60 2.36 - - - - - - - -
60 2.36
uni 879/880 TAB-K325 12/30 0.47/1.18 - - 60 2.36 - - - - - - - -
R10 60 2.36
uni 879/880 TAB-K350 12/30 0.47/1.18 - - 60/75 2.36/2.95 - - - - - - - -
R10 60 2.36
uni 879/880 TAB-K450R 12/30 0.47/1.18 - - 60 2.36 - - - - - - - -
60 2.36
uni 879/880 TAB-K450 12/30 0.47/1.18 - - 60/75 2.36/2.95 - - - - - - - -
R11 60/90 2.36/3.54 108 4.25
105 4.13
uni 879/880 TAB-K750 12/30 0.47/1.8 - - 60/75 0.47/2.95 - - - - - - - -
60/90 2.36/3.54 108/140 4.25/5.51
R13 105/130 4.13/5.12
170 6.69
Type of inserts I1 I2 I3 I4 I5 I6 I7
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
uni 843-K144 12 0.47 - - - - - - - - - - - -
uni 843-K175 12/30 0.47/1.18 - - - - - - - - - - - -
uni 843-K200 12/30 0.47/1.18 - - - - - - - - - - - -
uni 843-K250 12/30 0.47/1.18 - - - - - - - - - - - -
uni 843-K325 12/30/60 0.47/1.18/2.36 - - 60 2.36 - - - - - - - -
75
Chains with Moulded Rubber Inserts Inserts for Series
uni 863/963,
Standard material: Polyether ester (PUR) which has the F.D.A. approval. uni 863 TAB/963 TAB,
Standard material for base chain: Acetal LF-brown.
and uni 882
The standard size and type of
I1 I2 I3 I4
insert are stated in the tables as
2.5 2.5 10 the R-type.
1 1 15
10 8
The tables below show availa-
I5 I6 I7
ble lengths of the inserts.
The other lengths and types of
1 20 2 15
2
15
inserts can be supplied upon
request.
Type of inserts I1 I2 I3 I4 I5 I6 I7
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
uni 863/963-K325 12/30 0.47/1.18 - - 60 2.36 - - 70 2.76 - - - -
R10 60 2.36
uni 863/963-K450 12/30 0.47/1.18 - - 60/75 2.36/2.95 - - 70 2.76 - - 100 3.94
60/90 2.36/3.54 108 4.25
R12 105 4.13
uni 863/963-K600 12/30 0.47/1.18 - - 60/75 2.36/2.95 140 5.11 70/140 2.76/5.11 - - 100 3.94
60/90 2.36/3.54 108/140 4.25/5.11
R13 105/130 4.13/5.12
uni 863/963-K750 12/30 0.47/1.18 - - 60/75 2.36/2.95 140 5.11 70/140 2.76/5.11 - - 100 3.94
60/90 2.36/3.54 108/140 4.25/5.11
105/130 4.13/5.12
R14 170 6.69
Type of inserts I1 I2 I3 I4 I5 I6 I7
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
uni 882/882 TAB-K450 12/30 0.47/1.18 - - 60/75 0.47/2.95 - - - - - - - -
R11 60/90 2.36/3.54 108 4.25
105 4.13
uni 882/882 TAB-K750 12/30 0.47/1.18 - - 60/75 0.47/2.95 - - - - - - - -
60/90 2.36/3.54 108/140 4.25/5.51
R13 105/130 4.13/5.12
170 6.69
uni 882/882 TAB-K1000 12/30 0.47/1.8 - - 60/75 0.47/2.95 - - - - - - - -
60/90 2.36/3.54 108/140 4.25/5.51
105/130 4.13/5.12 200 7.87
R15 170/200 6.69/7.87
uni 882/882 TAB-K1200 R16 12/30 0.47/1.18 295 11.61 60/75 2.36/2.95 - - - - - - - -
60/90 2.36/3.54 108/140 4.25/5.51
105/130 4.13/5.12 200/250 7.89/9.84
170/200 6.69/7.87
uni 882/882 TAB-K1500 R16 12/30 0.47/1.8 295 11.61 60/75 0.47/2.95 - - - - - - - -
60/90 2.36/3.54 108/140 4.25/5.51
105/130 4.13/5.12 200/250 7.89/9.84
170/200 6.69/7.87
uni 882/882 TAB-K1600 R16 12/30 0.47/1.8 295 11.61 60/75 0.47/2.95 - - - - - - - -
60/90 2.36/3.54 108/140 4.25/5.51
105/130 4.13/5.12 200/250 7.89/9.84
170/200 6.69/7.87
76
Chains with Moulded Rubber Inserts Inserts for Series
uni 1873/3873
Standard material: Polyether ester (PUR) which has the F.D.A. approval. The standard size and type of
insert are stated in the tables as
Standard material for base chain: Acetal LF-brown. the R-type.
I1 I2 I3 I4
The tables below show availa-
2.5 2.5
1
10 1 15 ble lengths of the inserts.
10 8
Type of inserts I1 I2 I3 I4 I5 I6 I7
mm inch mm inch mm inch mm inch mm inch mm inch mm inch
uni 1873-K225 12/30 0.47/1.18 - - - - - - - - - - - -
uni 1873-K250 12/30 0.47/1.18 - - - - - - - - - - - -
uni 1873-K325 12/30 0.47/1.18 - - 60 2.36 - - 70 2.76 - - 70 2.76
R10 60 2.36
uni 1873-K450 12/30 0.47/1.18 - - 60/75 2.36/2.95 - - 70 2.76 - - 100 3.94
R11 60/90 2.36/3.54 108 4.25
105 4.13
uni 1873-K600 12/30 0.47/1.18 - - 60/75 2.36/2.95 140 5.11 70/140 2.76/7.87 - - 100 3.94
60/90 2.36/3.54 108/140 4.25/5.11
R13 105/130 4.13/5.12
uni 1873-K750 12/30 0.47/1.18 - - 60/75 2.36/2.95 140 5.11 70/140 2.76/7.87 - - 100 3.94
60/90 2.36/3.54 108/140 4.25/5.11
105/130 4.13/5.12
R14 170 6.69
uni 1873-K1000 12/30 0.47/1.8 - - 60/75 2.36/2.95 140/200 5.11/7.87 70/140 2.76/7.87 100/235 3.94/9.25
60/90 2.36/3.54 108/140 4.25/5.11 200 7.87
105/130 4.13/5.12 200 7.87
R15 170/200 6.69/7.87
uni 1873-K1200 R16 12/30 0.47/1.8 295 11.61 60/75 2.36/2.95 140/200 5.11/7.87 70/140 2.76/7.87 250 9.84 100/235 3.94/9.25
60/90 2.36/3.54 108/140 4.25/5.11 200 7.87
105/130 4.13/5.12 200/290 7.87/11.42
170/200 6.69/7.87
B 10 25/
64
77
Chains with Moulded Rubber Inserts Product Support
Recommended temperature
area: -40 to +80°C
(-40 to +176°F).
mm inch
S 38.0 1 1/2
78
Chains with Moulded Rubber Inserts Product Support
P1
90 mm
Type of product support 3.54 inch
Type of chain P1 P2 P3 P4 P5
uni 820/831 K450 X
K600 X
P2
K750 X X X 149 mm
K1000 X X X X
K1200 X X X X X
uni 880 K450 X P3
K750 X 152 mm
5.98 inch
uni 882 K450 X
K750 X X
K1000 X X
K1200 X X P4
214 mm
uni SC-TAB K450 X
8.43 inch
K750 X X X
K1000 X X X X
uni 863/963 K450 X
P5
K500 X 265 mm
K600 X 10.43 inch
K750 X X X
K1000 X X X X
mm inch
L 48.5 1 29/32
S1 22.5 57/
64
L S2 10.0 25/
64
S2
79
Chains with Moulded Rubber Inserts Inserts for
Steel Chains
80
Chains with Moulded Rubber Inserts Inserts for
Steel Chains
Standard material: Polyether ester (PUR). See page 73.
Standard rubber colour: Black.
R1
A
* Standard types. C
Type of chain R1 R2 R3 R4
uni SS812-K325 X* X
uni SS812-K350 X X R2
B
uni SS812-K400 X X
uni SS812-K450 X X C
uni SS812-K600 X X X
uni SS812-K750 X X* X
uni SS802-K750 X X* R3 E
uni SS881-K325 X* G
uni SS881-K450 X D
uni SS881-K750 X X*
uni SS8811-K325 X
mm inch
uni SS8811-K450 X
A 76.0 2.99
uni SS8811-K750 X X
B 140.0 5.51
uni SS8811 TAB-K325 X C 20.4 0.80
uni SS8811 TAB-K450 X D 27.0 1.06
81
Finger Plates Finger Plates for
uni 880 Rib
Standard materials: LF-brown.
See page 8.
Type 1
mm inch
E 5/
B C D A 4.0 32
F
B 220.0 8 21/32
C 150.0 5 29/32
G
D 75.0 2 61/64
H
E 114.3 4 1/2
F 52.0 2 3/64
G 12.0 15/
32
H 9.5 3/
A 8
L 119.0 4 11/
16
M 135.0 5 5/16
N 34.0 1 11/32
O 65.0 2 9/16
Type 1A
E
B C F
L
G H
Type 2
O E
M N
F
G
82
Finger Plates Finger Plates for
uni 880 Rib-Flex
and
Standard materials: LF-brown.
See page 8. uni 882 Rib-Flex
Type 1A mm inch
A 2.8 7/
64
B E
C L D B 220.0 8 21/32
G F
C 150.0 5 29/32
D 75.0 2 61/64
E 149.0 5 55/64
H
F 100.0 3 15/16
G 12.0 15/
32
A 23/
H 9.0 64
I 259.0 10 13/64
J 120.0 4 23/32
K 60.0 2 23/64
L 119.0 4 11/16
M 123.0 4 27/32
Type 2
N 22.0 55/
64
O 53.0 2 3/32
M O
N
E
F
G
H
A
Type 3
E
I F
J
K
83
Special Sprockets Two Part Sprockets
B B B B
B B
L L L
84
Special Sprockets Sprockets for
Snap-On Chains
The Snap-On sprockets are
supplied in steel, but can also be
supplied in 18/8 CrNi steel on
request.
Sprockets for Snap-On series uni 843, uni SK843 and uni 1843
1/ ” x 5/ ” Form B
2 16
No. pitch overall hub hub tooth
of bore diameter diameter diameter width L width B
teeth mm inch mm inch mm inch mm inch mm inch mm inch
17 12 0.47 69.12 2.72 74 2.91 52 2.05 28 1.10 7.2 0.28
18 12 0.47 73.14 2.88 78 3.07 56 2.20 28 1.10 7.2 0.28
B
19 12 0.47 77.16 3.04 82 3.23 60 2.36 28 1.10 7.2 0.28
20 12 0.47 81.18 3.20 86 3.39 64 2.52 28 1.10 7.2 0.28
21 14 0.55 85.21 3.35 90 3.54 68 2.68 28 1.10 7.2 0.28
22 14 0.55 89.24 3.51 94 3.70 70 2.76 28 1.10 7.2 0.28
23 14 0.55 93.27 3.67 98 3.86 70 2.76 28 1.10 7.2 0.28
24 14 0.55 97.30 3.83 102 4.02 70 2.76 28 1.10 7.2 0.28
25 14 0.55 101.33 3.99 106 4.17 70 2.76 28 1.10 7.2 0.28
Sprockets for Snap-On series uni 863/963, uni 863 TAB/963 TAB,
uni 1873 and uni 3873 - 3/4” x 1/2” Form B
No. pitch overall hub hub tooth
of bore diameter diameter diameter width L width B
teeth mm inch mm inch mm inch mm inch mm inch mm inch
17* 16 0.63 103.67 4.08 111 4.37 80 3.15 35 1.38 11.1 0.44
18* 16 0.63 109.70 4.32 117 4.61 80 3.15 35 1.38 11.1 0.44
19 16 0.63 115.74 4.56 123 4.84 80 3.15 35 1.38 11.1 0.44 L
20 16 0.63 121.78 4.79 129 5.08 80 3.15 35 1.38 11.1 0.44
21 20 0.79 127.82 5.03 136 5.35 90 3.54 40 1.57 11.1 0.44
22 20 0.79 133.86 5.27 142 5.59 90 3.54 40 1.57 11.1 0.44
23 20 0.79 139.90 5.51 148 5.83 90 3.54 40 1.57 11.1 0.44
24 20 0.79 145.95 5.75 154 6.06 90 3.54 40 1.57 11.1 0.44
25 20 0.79 151.99 5.98 160 6.30 90 3.54 40 1.57 11.1 0.44
26 20 0.79 158.04 6.22 166 6.54 95 3.74 40 1.57 11.1 0.44
27 20 0.79 164.09 6.46 172 6.77 95 3.74 40 1.57 11.1 0.44
28 20 0.79 170.14 6.70 178 7.01 95 3.74 40 1.57 11.1 0.44
29 20 0.79 176.19 6.94 184 7.24 95 3.74 40 1.57 11.1 0.44
30 20 0.79 182.25 7.18 190 7.48 95 3.74 40 1.57 11.1 0.44
31 25 0.98 188.30 7.41 196 7.72 100 3.94 40 1.57 11.1 0.44
32 25 0.98 194.35 7.65 203 7.99 100 3.94 40 1.57 11.1 0.44
33 25 0.98 200.41 7.89 209 8.23 100 3.94 40 1.57 11.1 0.44
34 25 0.98 206.46 8.13 215 8.46 100 3.94 40 1.57 11.1 0.44
35 25 0.98 212.52 8.37 221 8.70 100 3.94 40 1.57 11.1 0.44
36 25 0.98 218.57 8.61 227 8.94 100 3.94 40 1.57 11.1 0.44
37 25 0.98 224.63 8.84 233 9.17 100 3.94 40 1.57 11.1 0.44
38 25 0.98 230.69 9.08 239 9.41 100 3.94 40 1.57 11.1 0.44
39 25 0.98 236.74 9.32 245 9.65 100 3.94 40 1.57 11.1 0.44
40 25 0.98 242.80 9.56 251 9.88 100 3.94 40 1.57 11.1 0.44
* These sizes are too small for the uni 1873 and uni 3873 series.
85
Special Sprockets Idlers
L
Standard materials: Acetal D-
white. See page 8.
Idlers are available for: uni 810, uni 812, uni 815, uni 881, uni Magnet type,
uni 881 Super Flex, uni 8811, uni 8811 Super Flex, uni 820, uni 831, uni 879,
uni 879 Super Flex, uni 880 and uni 880 Super Flex. B
All guide rings are supplied with 3 clamping holes ø 4.8 mm (0.19 inch).
86
Headquarters
Denmark
Tooling department
R/D department
Denmark
Steel production
Denmark
Plastic production
Denmark
Global Sales Organization
Argentina Latvia
011 4717-5151 07248036
Head Office, Denmark Australia Lithuania
uni-chains A/S
(03) 9262 3333 (02) 392525
Englandsvej 12, DK-7100 Vejle
Tel: +45 75 72 31 00, Fax: +45 75 72 33 48
Austria Mexico
e-mail: admin@unichains.dk
(01)292 1071 (05) 3418131
www.unichains.com
Belarus Netherlands
017 2662486 074-255 36 36
Chile Philippines
026 963126 (02) 722-7444
Great Britain
uni-chains A/S Colombia Poland
Coombs Wood Business Park 42 62 03 23 (022) 664 3887
Coombs Wood Way
Halesowen Portugal
West Midlands Czech Republic
0651-648079 (02) 29478090
B62 8BH
Tel: 0121-559-0377, Fax: 0121-559-0373 Egypt South Africa
e-mail: admin@unichains.co.uk 02 4530255 011-7479500
India Taiwan
080 2242588 02 22182201
Italy
uni-chains Italia s.r.l. Iran Turkey
Via Umbria 16 021-8722237 (0212) 550 53 16
42100 Reggio Emilia
Tel: 0522 • 922470, Fax: 0522 • 922508 Israel UAE
e-mail: unichains@unichains.it 03-5593164 04 299 4828
Japan Venezuela
066 561 2014 (212) 991 9911
Singapore
uni conveyor chains Asia Pte Ltd.
57 Ubi Avenue 1
# 07-06 Ubi Centre
Singapore 408 936
Tel: 67498513/4, Fax: 67498515
e-mail: unichains@pacific.net.sg
USA
uni-chains Manufacturing Inc.
500 Brentwood Drive,
Reading, PA 19611, USA
Tel: (610)-372-1800, Tel: (800)-937-2864
Fax: (610)-372-3590
e-mail: sales@unichains.com