Beruflich Dokumente
Kultur Dokumente
2002
© ALP Controls
A and M Controls Ltd
TREND V.2002
6-8 Bishopsgate
09-JW/02
CONTROLS QTY List Disc. Mk Up Cost Total
HARDWARE Each % % EACH TOTAL Each Cost
Controllers
1 IQ3Xcite Controller 850.00 15 33.00% 960.93 0.00 722.50 0.00
2 8UI 15 33.00% 0.00 0.00 0.00 0.00
3 8DO 15 33.00% 0.00 0.00 0.00 0.00
4 4UI/4AO 15 33.00% 0.00 0.00 0.00 0.00
5 8AO 15 33.00% 0.00 0.00 0.00 0.00
6 IQ 251 Controller 2540.00 15 33.00% 2871.47 0.00 2159.00 0.00
7 EIN Input Card 316.00 15 33.00% 357.24 0.00 268.60 0.00
8 EAO Output Card 316.00 15 33.00% 357.24 0.00 268.60 0.00
9 IQ246 32DI/20AI/20VOController 2790.00 15 33.00% 3154.10 0.00 2371.50 0.00
10 CABLE/IQ246KIT (4 I/O cables unterminated) 66.00 15 33.00% 74.61 0.00 56.10 0.00
11 IQ241Controller 1610.00 15 33.00% 1820.11 0.00 1368.50 0.00
12 IQ242 12DI/8TI/8VO Controller 1800.00 15 33.00% 2034.90 0.00 1530.00 0.00
13 SCARD IO Modules 48.00 15 33.00% 54.26 0.00 40.80 0.00
14 CMTRAY Controller Chassis 25.00 15 33.00% 28.26 0.00 21.25 0.00
15 RMTRAY Relay Chassis 36.00 15 33.00% 40.70 0.00 30.60 0.00
16 IQ221 6UI/5DO/2VO Controller 575.00 15 33.00% 650.04 0.00 488.75 0.00
17 IQ222 6UI/6VOController 575.00 15 33.00% 650.04 0.00 488.75 0.00
18 IQ223 1DI/7UI/1DO/7VO Controller 850.00 15 33.00% 960.93 0.00 722.50 0.00
19 IQ228 1DI/7UI Controller 360.00 15 33.00% 406.98 0.00 306.00 0.00
20 IQ229 1DI/7UI/5DO/7VO Controller 1090.00 15 33.00% 1232.25 0.00 926.50 0.00
15 33.00% 0.00 0.00 0.00 0.00
22 IQ211 2TI/1UI/2DI/6DO Controller (240V) 270.00 15 33.00% 305.24 0.00 229.50 0.00
23 IQ212 2TI/1UI/2DI/2VO/4DO Controller (240V) 290.00 15 33.00% 327.85 0.00 246.50 0.00
24 IQL10 LON FCU Cont (24V) 132.00 15 33.00% 149.23 0.00 112.20 0.00
25 IQL11 LON FCU Cont (24V) 157.00 15 33.00% 177.49 0.00 133.45 0.00
26 IQL12 LON FCU Cont (24V) (3 Speed) 147.00 15 33.00% 166.18 0.00 124.95 0.00
27 IQL13 LON FCU Cont (24V) (3 Sp + Rem S/P) 186.00 15 33.00% 210.27 0.00 158.10 0.00
28 IQL14 LON FCU Cont (24V) (3 Sp + EH) 157.00 15 33.00% 177.49 0.00 133.45 0.00
29 IQL15 LON FCU Cont (24V) (3 Sp + EH + SP) 198.00 15 33.00% 223.84 0.00 168.30 0.00
30 IQL16 LON AHU Cont (24V) 211.00 15 33.00% 238.54 0.00 179.35 0.00
31 IQL16 LON VAV Cont (24V) 200.00 15 33.00% 226.10 0.00 170.00 0.00
IQL17 LON VAV/VAV Cont (24V) 213.00 15 33.00% 240.80 0.00 181.05 0.00
32 NETB/LINC/FTT Lon INC (per ~ 60 IQL's) 615.00 15 33.00% 695.26 0.00 522.75 0.00
33 LONTERMINATOR 48.00 15 33.00% 54.26 0.00 40.80 0.00
34 LONROUTER 528.00 15 33.00% 596.90 0.00 448.80 0.00
15 33.00% 0.00 0.00 0.00 0.00
36 Dispays & Nodes 15 33.00% 0.00 0.00 0.00 0.00
37 FPK+KIT Panel Mounted Display Panel 299.00 15 33.00% 338.02 0.00 254.15 0.00
38 ENDP Controller Mounted Display Panel 470.00 15 33.00% 531.34 0.00 399.50 0.00
39 NDP Panel Mounted Display Panel 555.00 15 33.00% 627.43 0.00 471.75 0.00
40 BUN/NDP/NBOX/CNC Display Panel 920.00 15 33.00% 1040.06 0.00 782.00 0.00
41 ENCL/S Trend Enclosure 190.00 15 33.00% 214.80 0.00 161.50 0.00
42 NBOX/CNC2 Node Controller 615.00 15 33.00% 695.26 0.00 522.75 0.00
43 NBOX/PNC Printer Node Controller 515.00 15 33.00% 582.21 0.00 437.75 0.00
44 NBOX/INC Internetwork Node Controller 615.00 15 33.00% 695.26 0.00 522.75 0.00
45 ENCLS/MBOX Steel Encl IQ22x & NBOX prods 50.00 15 33.00% 56.53 0.00 42.50 0.00
46 TMNH Modem Node Controller 410.00 15 33.00% 463.51 0.00 348.50 0.00
47 NBOX/TMNH Modem Node Controller In Encl. 575.00 15 33.00% 650.04 0.00 488.75 0.00
48 Trend FL5TX 5 Port Ethernet switch 350.00 15 33.00% 395.68 0.00 297.50 0.00
49 RS 5 Port Switch 110.00 15 33.00% 124.36 0.00 93.50 0.00
50 Trend 24Vdc Power Supply PSR230/14-1.3 57.00 15 33.00% 64.44 0.00 48.45 0.00
TREND FIELD ITEMS QTY List Disc. Mk. Up Price Total Cost Total
& INTERFACES Q Each % % Each Price Each Cost
MISC FIELD ITEMS QTY List Disc. Mk. Up Price Total Cost Total
& INTERFACES Q Each % % Each Price Each Cost
1 Belimo 20mm On/Off Zone 2P Ball Valve 58.23 33.00% 77.45 0.00 58.23 0.00
2 Belimo 25mm On/Off Zone 2P Ball Valve 62.87 33.00% 83.62 0.00 62.87 0.00
3 Belimo 32mm On/Off Zone 2P Ball Valve 67.32 33.00% 89.54 0.00 67.32 0.00
4 Belimo 15mm Char Ball Valve 0-10V 70.7 33.00% 94.03 0.00 70.70 0.00
5 Belimo 20mm Char Ball Valve 0-10V 73.94 33.00% 98.34 0.00 73.94 0.00
6 Belimo 25mm Char Ball Valve 0-10V 83.12 33.00% 110.55 0.00 83.12 0.00
7 Belimo 32mm Char Ball Valve 0-10V 95.81 33.00% 127.43 0.00 95.81 0.00
8 Belimo 40mm Char Ball Valve 0-10V 123.26 33.00% 163.94 0.00 123.26 0.00
9 Belimo 50mm Char Ball Valve 0-10V 151.1 33.00% 200.96 0.00 151.10 0.00
10 Belimo 40mm Screwed Globe Valve 0-10V 157.59 33.00% 209.59 0.00 157.59 0.00
11 Belimo 50mm Screwed Globe Valve 0-10V 180.14 33.00% 239.59 0.00 180.14 0.00
12 Belimo 65mm Flanged Globe Valve 0-10V 249.93 33.00% 332.41 0.00 249.93 0.00
13 Belimo 80mm Flanged Globe Valve 0-10V 299.61 33.00% 398.48 0.00 299.61 0.00
14 Belimo 100mm Flanged Globe Valve 0-10V 560.07 33.00% 744.89 0.00 560.07 0.00
15 Belimo 125mm Flanged Globe Valve 0-10V 788.27 33.00% 1048.40 0.00 788.27 0.00
16 Belimo 150mm Flanged Globe Valve 0-10V 902.75 33.00% 1200.66 0.00 902.75 0.00
17 33.00% 0.00 0.00 0.00 0.00
18 NM24 Damper Actuator 8Nm (1.5m )2
79 50 33.00% 52.54 0.00 39.50 0.00
19 NM24-SR Mod Damper Actuator 8Nm (1.5m2) 120 50 33.00% 79.80 0.00 60.00 0.00
20 SM24 Damper Actuator 15Nm (3m2) 94.9 50 33.00% 63.11 0.00 47.45 0.00
21 SM24-SR Mod Damper Actuator 15Nm (3m2) 145.3 50 33.00% 96.62 0.00 72.65 0.00
112
MISC ITEMS QTY List Disc. Mk. Up Price Total Cost Total
& INTERFACES Q Each % % Each Price Each Cost
Estimating
1 Estimating Engineer (Days) 250 - 25.00% 312.50 0.00 250.00 0.00
2
Commissioning
1 Commissioning (Normal Hours/Day) 1 350 - 25.00% 437.50 437.50 350.00 350.00
2 Commissioning (Out of Hours/Day) 400 - 25.00% 500.00 0.00 400.00 0.00
3 Panel Modifications (Days) 200 - 25.00% 250.00 0.00 200.00 0.00
4 Stopping Out 85 - 25.00% 106.25 0.00 85.00 0.00
5 Air Fares 0 - 25.00% 0.00 0.00 0.00 0.00
6 Air Balancing 100 - 25.00% 125.00 0.00 100.00 0.00
7 25.00% 0.00 0.00 0.00 0.00
8 Supervisor Works 25.00% 0.00 0.00 0.00 0.00
9 Schematics (No.off) 100 - 25.00% 125.00 0.00 100.00 0.00
10 Repeat Schematics (No.off) 30 - 25.00% 37.50 0.00 30.00 0.00
11 Load Schematics (Days) 300 - 25.00% 375.00 0.00 300.00 0.00
12 Other 300 - 25.00% 375.00 0.00 300.00 0.00
13 25.00% 0.00 0.00 0.00 0.00
14 Training 25.00% 0.00 0.00 0.00 0.00
15 Handover Demo (Days) 300 - 25.00% 375.00 0.00 300.00 0.00
16 Client Training (Days) 300 - 25.00% 375.00 0.00 300.00 0.00
17 - 25.00% 0.00 0.00 0.00 0.00
18 - 25.00% 0.00 0.00 0.00 0.00
TOTAL COMMISSIONING Price 437.50 Cost 350.00
Control Panels
____________ _________
TOTAL PROJECT PRICE TOTAL £561.20 Cost 452.00
# Jobnumber 09-JW/02
# Jobname 6-8 Bishopsgate Order Status Codes:
# Tender/Quote Due Date 11/30/2009 A = Awaiting Order
B = Favourite To Receive Order
# Sales Engineer JW C = Equal Chance Of Receiving Order
D = This Category Exists To Register Any Project
# Estimator JW
# Riema Office (Cam/Sus) Cam
ie Office Local To Project
Prices
Hardware £0.00
Field Controls £123.70
Engineering £0.00
Commissioning £437.50
Panels £0.00
Wiring £0.00
Ander Technik
7-8 Simmonds Buildings
Bristol Rd
Hambrook
Bristol BS16 1RY
Dear Sirs,
6-8 Bishopsgate
Further to our site visit of 26-11-09 to the above works please find below and attached our
further proposal and prices for the project.
Our price is for the supply of the equipment indicated in the schedules attached, including
the supply of the replacement controls, installation of replacement controls, control wiring
and on site commissioning and air balancing.
Prices are fixed and valid if accepted within 60 days of the date of this communication.
Prices are based on A&M Controls Ltd standard terms and conditions of sale, attached.
We reserve the right to amend these prices if the terms are varied in any way
Yours faithfully,
Jim Woods
Director
All power and control wiring including containment, final connections and testing.
Power supplies to VAV units
4. All plant and installation must be complete and ready for operation prior to our
commissioning visit. Any delays as a result of failure of plant or equipment not provided by
A&M Controls Ltd may result in additional commissioning charges, if we are required to
attend outside our programmed commissioning dates.
5. We have allowed to carry out all works during 'Out of Hours' working, i.e. Monday -
Friday 6p.m. to 10 p.m.
6. Full details of the Mechanical equipment to be supplied under this contract must be
supplied to us at time of order placement.
7. Any variations or additions to the works as instructed by the consultant or client must be
forwarded to A&M Controls Ltd in writing before they can be executed.
8. Our quotation is based on our mutual agreement on the programme of works, prior to the
acceptance of the order.
9. Any contract conditions are subject to agreement. This offer is based upon our standard
terms and conditions unless otherwise agreed in writing.
10. Title shall not pass for any goods or materials supplied until full payment is received.
b) Payment shall be made within thirty days of our invoice being presented.
c) Payment shall be made in full and not be subject to any retention.
d) No allowance has been made for 2.5% Main Contractor Discount.
Our prices are based on the above conditions. We reserve the right to vary pricing if
the terms of payment are changed.
(e) Product means Products or parts thereof to be supplied but not necessarily manufactured by A&M Controls Ltd to a Customer and may include but shall
not be limited to electrical/electronic products computer hardware products computer software products consumables and documentation.
(f) Contract Price shall mean the sum so named in the Contract and is ex-works exclusive of VAT and other taxes and delivery costs which are payable in
addition at the rate applicable at the date of invoice.
(g) Premises shall mean the place or places other than A&M Controls Ltd Premises to which the Product is to be delivered or where Services are to be
provided as described in the Contract.
(h) The Date of Handover means the date upon which the Customer is required to sign the certificate of handover referred to in paragraph 1.7 hereof or the
date of supply of product where the Contract is for supply of Product only.
1.2) CONTRACT
(a) Any quotation submitted by A&M Controls Ltd to the Customer shall constitute an offer and shall remain open for acceptance by notice in writing duly
signed by the customer or its duly authorised representative
(b) Any Contract between A&M Controls Ltd and the Customer shall incorporate and be subject to these general terms and conditions and any terms or
conditions (if any) contained in the Customers order form or other document which are inconsistent with these general terms and conditions shall be void and
of no effect.
(c) Any representation or warranty whether written or oral made or given prior to the Contract is hereby expressly excluded and any amendment to these
general terms and conditions shall not apply unless it is agreed in writing by A&M Controls Ltd.
(d) If any provisions hereof shall be held by a court of competent jurisdiction to be invalid or voidable such provision shall be struck out and the remainder
hereof shall stand in full force and effect.
(e) A&M Controls Ltd reserves the right, by giving notice to the customer at any time before installation, to increase the price of the products to reflect any
increase in the cost to A&M Controls Ltd which is due to any factor beyond the control of A&M Controls Ltd (such as, without limitation, any foreign exchange
fluctuation, currency regulations, alterations of duties, significant increases in the cost of labour, materials or other costs of manufacture), any change in
delivery dates, quantities or specifications for the products which is requested by the customer , or any delay caused by any instructions of the customer or
failure of the customer to give A&M Controls Ltd adequate information or instructions.
1.3) LIABILITY
(a) Subject to the specific Warranty provisions herein contained ALP Controlss liability for any claims for any injury loss or damage made by the Customer
arising out of or in connection any infringement of copyright or any other intellectual property right, any representations or implied warranty, condition or term
with any defects in the Product or any act omissions neglect or default (whether or not constitutes a fundamental breach of the Contract or a fundamental
term thereof) of A&M Controls Ltd its servants or agents in the performance of the Contract shall be limited to the invoiced value of the Contract.
(b) A&M Controls Ltd shall not in any event be liable for any consequential loss or damage howsoever caused.
(c) The provisions of clause 1.3(a) do not affect ALP Controls's common law liability, as stated above.
1.4) CONFIDENTIALITY
(a) A&M Controls Ltd and the Customer shall keep confidential any information obtained under the contract and shall not divulge the same to any third party
without the consent in writing of the other party.
(b) The property and copy right in all documents drawings plans illustrations photographs and other printed matter submitted to the Customer shall remain
with A&M Controls Ltd and none of these items shall be disclosed to a third party without ALP Controls,s written consent
(c) The customer shall not acquire directly or indirectly by virtue of any Contract any industrial intellectual or other Property rights of A&M Controls Ltd
pertaining to the Products and any present or subsequently acquired industrial or intellectual Property or other protected rights of A&M Controls Ltd pertaining
to the Products shall become or remain the sole and exclusive property of A&M Controls Ltd.
1.5) TITLE AND RISK
(a) Risk in the Product shall pass to the Customer on delivery to the premises.
(b) Property in the Product shall not pass to the Customer until paid for in full. in cash or in cleared funds. If nevertheless the Customer sells the Product or
sells items into which the Products have been incorporated before the Products have been paid for in full he shall hold the proceeds of sale in trust for A&M
Controls Ltd and A&M Controls Ltd shall be entitled to trace the products into such items or the proceeds of sale.
(c) Notwithstanding clause (b) above the Customer hereby acknowledges that the supply of a Product includes a personal non-transferable and non-exclusive
licence to use any incorporated software and that such licence specifically excludes using such software otherwise than in connection with the Product at the
Premises.
(d) In the event of default in payment by the Customer or the Customer entering into liquidation or being made bankrupt or having a winding up order made
against it or having a receiver appointed A&M Controls Ltd shall without prejudice to any other remedies it may have under the Contract: (i) terminate the
Contract forthwith by notice in writing to the Customer liquidator or other proper person as appropriate (ii) enter the Premises and recover any or all Products
in respect of which full payment of the Contract price has not been made and the Customer liquidator or other proper person shall afford A&M Controls Ltd
free access thereto and all such facilities as may be necessary to enable A&M Controls Ltd so to do
(e) The rights of any party shall not be prejudiced or restricted by any indulgence or forbearance extended to any other party or parties and no waiver by any
party in respect of any breach shall operate as a waiver in respect of any subsequent breach. Unless otherwise agreed in writing, any waiver of a breach
shall be without prejudice to the parties' rights and remedies hereunder.
1.6) DELIVERY AND INSTALLATION
(a) A&M Controls Ltd will use its best endeavours to comply with any date or dates agreed for delivery of and/or installation of the Product and the provision
of services but such date or dates shall only be statements of expectations and in no way binding on A&M Controls Ltd and accordingly time of delivery and
installation shall not be the essence of the Contract.
(b) Delay in delivery of and/or installation of the Product or Services shall not entitle the Customer to rescind or repudiate the Contract or to claim any
damages or compensation but if such delay arises as a result of any circumstances as envisaged under clause (1.12)hereof and lasts for a period more than
six months either party may by written notice to the other forthwith terminate the Contract on the following terms: (i) the Customer shall pay A&M Controls Ltd
for any Product or Services supplied; (ii) the Customer shall pay A&M Controls Ltd for all work done and materials used.
(c) The Customer shall not be entitled to delay delivery or the provision of Services under any circumstances and if the Contract does not specify any date for
delivery the Customer shall accept delivery when the Product is available for a delivery.
1.7) HANDOVER
When the Product has been delivered and installed in accordance with the Contract and has passed all agreed inspection and testing required under the
Contract it will be handed over to the Customer who will be required to sign ALP Controls's standard certificate of handover.
1.8) WARRANTY
(a) The warranty period shall be 12 month from date of delivery to the Premises in respect of any Hardware Products supplied.
(b) A&M Controls Ltd warrants to the Customer that it will use its reasonable endeavours to procure the manufacturers of the various parts of the Products to
pass on the benefit of the warranties (if any) given by those manufacturers for the Customers benefit.
(c) The warranty shall be inoperative in the event of: (i) failure of the Customer to maintain a suitable operating environment; (ii) use of Products for purposes
other than those for which they were originally designed without prior approval; (iii) accidental damage or neglect; (iv) failure of the Customer to follow
operating procedures laid down by ALP Controls; (v) any alterations or additions to the Product or relocation of any part of the product without ALP Controlss
prior approval.
(d) The warranty shall not apply to the replacement of consumables of the type but not limited to printer paper tapes disks printer ribbons printer heads.
It shall be the sole responsibility of the Customer to provide and maintain at all times adequate environmental and operational conditions for the Product and
any additional costs incurred by A&M Controls Ltd due to the Customers failure suitability to prepare or maintain the Premises or to provide A&M Controls Ltd
with all facilities reasonably required by it to perform its obligations under the Contract shall be borne by the Customer.
1.10) TERMINATION
(a) Either party shall have the right to terminate the Contract if the other party is in material breach of the Contract and does not rectify this breach within 30
days of receipt of notification thereof in writing.
(b) Such termination shall in all cases be without prejudice to the existing rights and obligations of both parties.
1.11) ASSIGNMENT
The Customer shall not be entitled to assign the Contract or any part thereof.
1.12) FORCE MAJAURE
Neither party shall be liable for failure to perform its obligations under the Contract if such failure results from circumstances beyond the party's reasonable
control including but not limited to trade disputes break down of plant delay by suppliers fire theft riot war prohibition of export or import Act of God.
1.13) NOTICE
Any notice to be given hereunder shall be in writing and shall be delivered or sent by post to the relevant party at its registered or principal office (or such
other address as shall have been notified to the other party) and shall be deemed to have been given in the case of a notice which has been delivered by
hand when it deposited at the appropriate address. In the case of a notice sent by post 48 hours after the date on which a first class registered letter including
such notice is posted.
1.14) PAYMENT
Payment shall be made within thirty days of our invoice being presented.
Any payment due hereunder shall be made without any deduction or set off whatever.
If the customer fails to make any payment on the due date then, without prejudice to any other right or remedy available to ALP Controls, A&M Controls Ltd
shall be entitled to:
(a) Cancel the contract or suspend any further deliveries or installation to the customer.
(b) Payment of invoices shall be made within 30 days of invoice date. A&M Controls Ltd shall have the right to charge interest from the invoice date on
overdue invoices without further notice at the rate of 4% over the base rate of Barclays Bank Plc for the time being.
1.15) LAW
These general terms and conditions and each and every Contract pursuant thereto shall be construed and interpreted in accordance with the laws of England.
Price Summary
Total £561.20
Ref: 25713931.xls