0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
115 Ansichten2 Seiten
This document provides technical specifications for resilient seat gate valves with nominal diameters ranging from DN50 to DN300. The valves have flanged ends and comply with standards EN 1074-2, BS 5163, ISO 7259, and EN 1171. Dimensions, materials, pressure ratings, torque specifications, and component details are given for valves suitable for potable and raw water applications up to 70°C.
This document provides technical specifications for resilient seat gate valves with nominal diameters ranging from DN50 to DN300. The valves have flanged ends and comply with standards EN 1074-2, BS 5163, ISO 7259, and EN 1171. Dimensions, materials, pressure ratings, torque specifications, and component details are given for valves suitable for potable and raw water applications up to 70°C.
This document provides technical specifications for resilient seat gate valves with nominal diameters ranging from DN50 to DN300. The valves have flanged ends and comply with standards EN 1074-2, BS 5163, ISO 7259, and EN 1171. Dimensions, materials, pressure ratings, torque specifications, and component details are given for valves suitable for potable and raw water applications up to 70°C.
Resilient Seat Gate Valves NRS Nominal Diameter DN 50 65 80 100 125 150 200 250 300 Face to Face dimension (mm) Series 3 (BS) 178 190 203 229 254 267 292 330 356 EN 558-1 / ISO 5752 Series 14 (F4) 150 170 180 190 200 210 230 250 270 EN 558-1 / ISO 5752 Series 15 (F5) 250 270 280 300 325 350 400 450 500 Flange Dimensions EN 1092-2 / ISO 7005-2 Flange Drilling & PCD [3] EN 1092-2 / ISO 7005-2 Height (mm) Centreline to bare stem top [4] (H1) 208 232 257 294 334 372 464 559 633 Height (mm) Centreline to Standard cap top [4] (H2) 280 315 340 375 416 450 545 635 710 Height (mm) Centreline to handwheel / rim [4] (H4) 240 266 290 330 370 405 500 590 670 Turns to close [3] (+/-1) 14 14 17 21 26 31 34 42 50 Mass for shipping Series 3 (BS) (Kg approx.) 11 13 15 20 29 34 50 82 113 Mass for shipping Series 14 (F4) (Kg approx.) 11 13 14 19 28 32 46 77 105 Mass for shipping Series 15 (F5) (Kg approx.) 12 14 16 21 30 36 54 87 121 Maximum Operating torque MOT (N-m) 110 125 140 160 185 210 260 310 360 Minimum Strength Torque mST Bare Shaft [5] (N-m) 220 250 280 320 375 450 600 750 900 Average Sealing Torque [6] (N-m approx.) 36 45 62 71 80 92 131 186 192 Production Hydrostatic Test Body (Bar) 25.0 Production Hydrostatic Test Seat (Bar) Closing direction [3] PN 16 Standard, (PN10 & other drillings on request) Clockwise closing (CC) Standard, Anti Clockwise (ACC) available on request PN16 17.6 (EN 12266-1 Rate A) NOTE: [1] For non potable media applications such as sewerage or salt water consider the Aggressive Media version - F4062 [2] For higher operating temperatures or special media applications contact your local Tyco Water office [3] Valves are supplied standard as indicated above; alternatives must be specified at order placement [4] Dimensions above that are not specified in manufacturing standards are +/ 10mm [5] Strength test 2 x MOT, EXCLUDES bending moment test Suitable for valves operated by T bar Only. [6] Stated values are the average of side A & B over a sample size of >1000pcs. Actual sealing torque value may vary +/ 20% due to manufacturing variations. TEHNICAL DATA SHEET Size Range: DN50 - DN300 End Type: Flange - Flange Application: Fluid Isolation Suitable Media: Potable & Raw Water [1] Operating Device: T Bar or Hand Wheel only Operating Temperature: Up to 70C. [2] Complying Standards: EN 1074-2 (Annex A), BS 5163 ISO 7259 (Type A1) EN 1171 (Cat. 3) STANDARD CAP HAND WHEEL H2 H1 H4 Face to Face C e n t r e l i n e F4060 BS 5163 EN 1074 EN 1171 ISO 7259 No. Part Name Material Standard Grade 1 Wedge + Acetyl guides Ductile Iron / EPDM / Acetyl BS 1563 / EN 681-1 EN-JS 1040 / 70 2 Bonnet Gasket EPDM / NBR EN 681-1 & BS 6920 Hardness 70 3 Lower Stem Nut O-Ring EPDM / NBR EN 681-1 & BS 6920 Hardness 70 4 Stem O-Ring EPDM / NBR EN 681-1 & BS 6920 Hardness 70 5 Upper Stem Nut O-Ring EPDM / NBR EN 681-1 & BS 6920 Hardness 70 6 Stem O-Rings (2) EPDM / NBR EN 681-1 & BS 6920 Hardness 70 7 Dust Guard EPDM / NBR Commercial N-A 8 Stem (Pitch lead <12mm) [b] Rolled Stainless Steel EN 10088-3 / AISI SS 1.4021 / 420 (12-14% Cr) 9 Stem Nut [b] Forged Copper Alloy EN 12165 / ASTM B150M CW612N / C37800 10 Thrust Collar (Split) [b] Forged Copper Alloy EN 12165 / ASTM B150M CW612N / C37800 11 O-Ring Sleeve [b] Forged Copper Alloy EN 12165 / ASTM B150M CW612N / C37800 12 Bonnet Ductile Iron / FBE Coated BS 1563 / WIS 4-52-01/02 EN-JS 1040 / Class B 13 Bonnet Fasteners (encapsulated) High Tensile Steel / Activated Resin EN 10083-1 / Commercial 1.1181 / Silicone 14 Wedge Nut [b] Forged Copper Alloy EN 12165 / ASTM B150M CW612N / C37800 15 Body Ductile Iron / FBE Coated BS 1563 / WIS 4-52-01/02 EN-JS 1040 / Class B 16 BS 5163 Stem Cap 1:20 Ductile Iron / FBE Coated BS 1563 / WIS 4-52-01/02 EN-JS 1040 / Class B 17 Hand Wheel Steel / FBE Coated ASTM / WIS 4-52-01/02 A 283 GRC/ Class B 18 Hand wheel / Cap fastener Stainless Steel EN 10088-3 / AISI SS 1.4301 / 304 (A2) 19 Stem Cap ingress seal EPDM (Closing direction indicated) Commercial N-A NOTE: [a] Before installation, operation or maintenance, refer to Tyco Water for the latest installation & operating instructions [b] Materials are supplied standard as stated above; alternatives must be specified at order placement VALVE COMPONENTS Tyco Water Asia 17A W Square Building, 314-324 Hennessy Road, Wanchai, Hong Kong SAR Phone: +852 2919 1900 Fax: +852 2191 9286 www.tycowater.com Due to constant product improvement Tyco reserves the right to change or modify this data without notice October 2009 RAL / GSK certified coating 7 19 18 16 F4060 18 17 8 6 15 13 14 12 11 10 9 1 2 3 4 5