Beruflich Dokumente
Kultur Dokumente
Your Score
Name
Nicky Jun Escobal
Your Score 100 out of 100 points
Answered Correctly 20 Questions
Answered Incorrectly 0 Question
% Your Score 100 %
Your Result
Pass
Your Answers
Question.
1)
Correct
High temperature metals like columbium can be easily welded by _____ welding.
A. MIG
B. flash
C. electron beam (Your Answer)
D. TIG
Question.
2)
Correct
A weld bead of wineglass design is produced in _____ welding.
A. laser
B. plasma arc (Your Answer)
C. electron beam
D. MAG
Question.
3)
Correct
Spot welding process basically depends on
A. generation of heat and application of forging pressure (Your Answer)
B. application of forging pressure
C. ohmic resistance
D. generation of heat
Question.
4)
Correct
Welding is not done directly from the supply mains because
A. its voltage is too high
B. it is customary to use welding machines
C. its voltage keeps fluctuating
D. it is impractical to draw heavy currents (Your Answer)
Question.
5)
Correct
In DCSP welding
A. heavily-coated electrodes are used
B. workpiece is relatively cooler
C. base metal penetration is deep (Your Answer)
D. electrode is the hottest
Question.
6)
Correct
Unlike TIG welding, MIG welding
A. requires no post-weld cleansing
B. provides complete protection from atmospheric contamination
C. requires no flux
D. uses consumable electrodes (Your Answer)
Question.
7)
Correct
The ultimate aim of using electrode coating is to
A. provide shieding to weld pool
B. cleanse the base metal
C. improve bead quality (Your Answer)
D. prevent atmospheric contamination
Question.
8)
Correct
MIG welding process is becoming increasingly popular in welding industry mainly because of
A. its high metal deposit rate
B. both its easy operation and its high metal deposit rate (Your Answer)
C. its easy operation
D. its use in both ferrous and non-ferrous metals
Question.
9)
Correct
AC welding machine cannot be used for ____ welding.
A. resistance
B. MIG (Your Answer)
C. atomic hydrogen
D. submerged arc
Question.
10)
Correct
In the process of electroslag welding, theoretically there is no upper limit to the
A. slag bath-temperature
B. rate of slag consumption
C. thickness of weld lead (Your Answer)
D. rate of metal deposit
Question.
11)
Correct
Electric resistance seam welding uses _____ electrodes.
A. domed
B. pointed
C. disc (Your Answer)
D. flat
Question. Correct
12)
The basic electrical requirement in arc welding is that there should be
A. dc power supply
B. high open-circuit voltage (Your Answer)
C. coated electrodes
D. no arc blow
Question.
13)
Correct
In electrode-positive welding, _____ of the total heat is produced at the electrode.
A. one-third
B. one-fourth
C. two-third (Your Answer)
D. one-half
Question.
14)
Correct
The major disadvantage of carbon arc welding is that
A. there is occurence of blow holes (Your Answer)
B. electrodes are consumed fast
C. bare electrodes are necessary
D. separate filler rod is needed
Question.
15)
Correct
Projection welding can be regarded as a mass production form of ______ welding.
A. upset
B. seam
C. butt
D. spot (Your Answer)
Question.
16)
Correct
Submerged arc process is characterized by
A. exceptionally smooth beads
B. high welding current
C. deep penetration
D. all of the above (Your Answer)
Question.
17)
Correct
. In atomic hydrogen welding, electrodes are long lived because
A. it is a non-pressure process
B. two are used at a time
C. arc is in the shape of a fan
D. ac supply is used (Your Answer)
Question.
18)
Correct
The major power supply used in MIG welding is
A. electrode-negative
B. DCSP
C. DCRP (Your Answer)
D. ac supply
Question.
19)
Correct
Overhead welding position is thought to be the most ______.
A. difficult
B. hazardous (Your Answer)
C. useful
D. economical
Question.
20)
Correct
In electrical welding, arc blow can be avoided by
A. increasing arc length
B. using ac welding machines (Your Answer)
C. welding away from earth ground connection