Unless specifically stated herein, the AED-N Standard Design Requirements (latest version) shall be adhered to in this Contract. These documents are available from the AED-N website located at: http://www.aed.usace.army.mil/engineeringtop2010.asp These documents shall be used as the basis for design and construction, and for selecting options within the United Facilities Guide Specifications (UFGS). When provided, its the Contractors option to use either the specifications contained in the AED-N Standard Design Requirements, or to adapt the UFGS specifications to match the requirements provided in the AED-N Standard Design Requirements. Site or project specific data and requirements in the AED-N Standard Design Requirements shall supersede UFGS language where there are differing criteria which must be evaluated and selected. 2.0 CIVIL REQUIREMENTS The project includes furnishing all materials, equipment and labor for constructing electrical, water, communication, wastewater treatment and storm sewer service lines, as applicable, and connecting to the existing utility networks. 2.1 ENVIRONMENTAL PROTECTION The Contractor shall comply with all requirements of Section 01355 ENVIRONMENTAL PROTECTION. 2.2 GEOTECHNICAL 2.2.1 GEOTECHNICAL REPORT Geotechnical report(s) have already been provided for the site and can be found in Appendix B-3 for reference. 2.3 SITE DEVELOPMENT 2.3.1 SITE PLAN The Contractor shall provide the following plans, and submit as part of the required design review process as defined in Section 01335 SUBMITTAL PROCEDURES. 2.3.2 SITE SURVEY PLAN a. As located and defined by the items listed in Section 1.6.1 provided in Section 01010 SCOPE OF WORK, the Site Survey Plan shall be performed by a licensed professional (surveyor, civil engineer or architect), and shall show the areas in the NLC to be modified in this Contract. The areas to be surveyed shall include items 4, 5, 6, 7, and 10 as described in Section 01010 1.6.1b. The site survey shall meet the requirements of World Geodetic System 1984 in decimal degrees. b. The plan shall be based on a professional survey of the project site, and shall include and locate the following existing information: topographic contours, corners of existing buildings and significant structures, trees, wadis, adjacent and/or on-site roads with names and widths, utility easements, right-of-ways, setbacks, parking and paved areas, storage containers, stoops, sidewalks, barriers, ECPs, perimeter walls and towers, above ground utilities, and bunkers. 2.3.3 MASTER SITE PLAN a. The Master Site Plan shall identify and show all proposed work including the following: site limits, perimeter walls and all its related components, entry control point components, buildings, roads, parking areas, fenced-in areas, sidewalks, utility structures, landscape features, and drainage structures. The Master Site Plan shall refer to the provided Conceptual Site Plan, other provided drawings and all requirements stated in Section 01010 SCOPE OF WORK to assist in developing the W912DQ-13-R-4034