Beruflich Dokumente
Kultur Dokumente
Quick
Check the POWER lamp (green) on the front of the PX-EH.
Setup Guide
network network
All unsaved data are Modem Internet
written to the internal or
AC Adapter
PX-EH Series
Power Cable
external hard disk drive. Broadband router
Please wait. that functions as a Hub
DHCP server
When the shut down is complete, the power will be cut off
3 automatically and the POWER lamp will turn off.
z If an external hard disk or printer is connected, turn off its power by
Important Infomation
Quick Setup Guide
following the order below: Turn off the power to the PX-EH by following
steps 1 to 3 above Î Turn off the power to the external hard disk or
printer. PX-EH
z We recommend that you disconnect the power cable from the power
socket if the PX-EH will not be used for a prolonged period.
6 7 1
Connecting the PX-EH to a network. Turn on the power. Access the PX-EH.
Connet the AC Adapter to DC of the PX-EH and How to Read the Online Manual
z This PX-EH is designed for installation in vertical orientation. Example of accessing from a Windows XP computer
Do not install it horizontally, as it may cause breakdown.
1 the power socket.
Power on The Online Manual is provided as a HTML document.
We recommend that you view the Online Manual in Internet Explorer Version 5.0 or higher.
z Connect the PX-EH after confirming that the DHCP server is operating. Click Start, right-click My Network Enter “PX-EH” under Computer
Turn on the POWER switch located on the rear 1 Places, and then click Search for
2 name, and then click the
Windows
2 of the PX-EH. If the switch is already on, such as Computers. Search button.
n Set the supplied CD-ROM in your computer.
Set the MDI/MDI-X selector switch on the rear of the PX-EH in accordance o The menu will be displayed automatically.
1 with the network equipment to which the PX-EH is connected. when the PX-EH was shut down from the setup
If the menu is not displayed automatically, open the CD-ROM from
screen after the last session, turn off the switch
My Computer, etc., and then double-click top.htm
and then turn it back on. Click
Mac
Connected network equipment
The PX-EH has been powered up when the POWER lamp on the n Set the supplied CD-ROM in your computer.
3 front of the PX-EH turns to a steady green light. o When the CD icon is displayed, double-click the icon.
If the POWER lamp does not turn to a steady green light, refer to Enter “PX-EH” p Double-click top.htm
"Troubleshooting in the Online Manual" provided separately.
MID-X port of 1 Selector
Hub Switch
computer or hub n Turn on briefly Click When you open online manual on Windows XP SP2, a pop-up
message, "Information Bar", may appear.
2 LAN port
Approx. Double-click PX-EH series “PX- Double-clicking the disk folder Tip If it appear, please check "Do not show this message again" and
MDI-X MDI 15 seconds 3 EH”, which will be found as a result 4 will open the usable folders in click "OK". Online Manual will be displayed.
of search. the PX-EH.
MDI/MDI-X selector switch
Always turn on the power to the PX-EH after confirming that the LAN While the PX-EH is operating, do not turn off the power by
cable is securely connected. If the PX-EH is powered up before the disconnecting the power cable or turning off the AC tap with switch
LAN cable is connected, the PX-EH cannot participate in the network without completing the shut down process. Doing so may result in
properly. breakdown or cause loss of data. Click
2 3 4 5