0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
51 Ansichten3 Seiten
Abdul Rehman is a mechanical engineer from the University of Engineering and Technology Lahore with over 3 years of experience in mechanical design. He is currently working as a Design Engineer at Descon Engineering Limited, where he performs mechanical design calculations, prepares design documentation, and ensures designs meet quality standards. Prior to this, he worked as a Production Engineer at Best Engineers. His objective is to contribute to organizational goals through efficient engineering and cost reduction.
Abdul Rehman is a mechanical engineer from the University of Engineering and Technology Lahore with over 3 years of experience in mechanical design. He is currently working as a Design Engineer at Descon Engineering Limited, where he performs mechanical design calculations, prepares design documentation, and ensures designs meet quality standards. Prior to this, he worked as a Production Engineer at Best Engineers. His objective is to contribute to organizational goals through efficient engineering and cost reduction.
Abdul Rehman is a mechanical engineer from the University of Engineering and Technology Lahore with over 3 years of experience in mechanical design. He is currently working as a Design Engineer at Descon Engineering Limited, where he performs mechanical design calculations, prepares design documentation, and ensures designs meet quality standards. Prior to this, he worked as a Production Engineer at Best Engineers. His objective is to contribute to organizational goals through efficient engineering and cost reduction.
H # 112 Mehboob Garden opposite Nishter Colony 18 Km Ferozpur Road Lahore, Pakistan Tel: +92-42-35923524 Mob: +92-321-4337383 Date of Birth: 06/06/1990 abdulrehman.ime@gmail.com CNIC No: 35202-1884868-9 Passport No: EU9158681 Languages: English, Urdu Punjabi
OBJECTIVE:
Continuous Improvement, Adaptability, being an effective team player and a strong contribution towards the achievement of organizational goals by efficient management and cost reduction are the core values of my vision for success. I look forward to pursue a challenging career as a Mechanical Engineer with three (03) years of rich experience. EDUCATION:
B.Sc INDUSTRIAL AND MANUFACTURING ENGINEERING from University of Engineering and Technology Lahore (UET) Intermediate (F.Sc Pre Engineering) from Board of Intermediate and secondary Education Lahore Matriculation from Board of Intermediate and Secondary Education Lahore. PROFESIONAL SKILLS
Preparation/Checking of TDCs (Technical Delivery Conditions) and material Specifications according to Project Specifications & Relevant Code. Developed guidelines and prepare Excel Sheets for Mechanical Design of Fire Tube Boiler based on EN12953 and Water Heater on ASME SECTION IV. Pressure parts calculations of boilers (water tube, fire tube, HRSG's as per ASME Section I, ASME Section IV, TRD, and EN 12953 for 3rd Party Inspection/Approval. Coordination with Different Detailing and Drafting Personals Assisting for the Generation of all the fabrication drawings to make sure the compliance with design documents (i-e design calculations, design code(s), project specification(s)) Pressure Vessels Calculations as per ASME Section VIII-1, using software COMPRESS and PV-Elite. Steel Stacks Design Calculations as per ASME STS-1 using software STACKDES Preparation of Mechanical Structures and Foundation Loading Drawings for Boilers, Equipment's, Tanks, & Structures for Civil Work using STAAD PRO. Preparation/Checking of BOM/BOQ for Steel Structures, Boilers and Pressure Vessels as per Drawings and Calculations. Technical Scrutiny and Vetting of Purchases from vendor PROJECTS
Mechanical design of Steam Generation plant for 2.55 MW Power Plant awarded by M/S Gadoon Textile Mills and 0.56 MW Power Plant by M/S Sapphire Textile Mills Mechanical Design of Skid Mounted Fire Tube Boiler for Procter and Gamble and Riaz Bottlers Pakistan (Pepsi cola) Mechanical Design Waste Heat Recovery Steam Generation System for M/S Aga Khan Hospital. Mechanical design of Waste Heat Recovery Hot Water Heating system for M/S Allied Engineering and Services WORK EXPERIENCE DESCON ENGINEERING LIMITED Descon Lahore Manufacturing holds a valid Certificate of Authorization from ASME to use the Code symbol Stamps S, A, PP, U, U-2 for the manufacture and/or assembly of Power Boilers, Power Piping, and Pressure Vessels. Working as a DESIGN ENGINEER (MECHANICAL). From 26 December 2012 to Till. RESPONSIBILITIES Ensure on time delivery of design output during projects stages. Perform design calculation, based on design code, softwares and standard engineering practices. Ensures that problems in technical areas/ information and this interpretation are clearly identified and dealt promptly. Assists designers to develop initial conceptual and layout drawings from specifications. Prepare detailed design specifications based on design calculations and contractual requirements. Technical evaluation of vendor items and ensures that they are in accordance with design specifications. Takes Ownership of QHSE Policy, Companys Values and ensures their implementation. Involves himself to ensure that design is executed in accordance with the sequence of Quality Management System. Ensures that Drawings/ Data are stored securely in appropriate location. Follow the concurrent/ predefined engineering methodology/ procedures. Identify & implement improvement in products/ procedures as follows; Identify opportunities for improvement in design/ products. Evaluate proposed changes for benefits / disadvantages. Discuss/ arrange for implementation via L.E / I/C O.B. Maintain record for all non-conformances related to design specific to projects. Occasionally traveling to clients / going sites for evaluation / improvement in design. BEST ENGINEERS 31-KM FEROZPURROAD LAHORE-PAKISTAN CHIEF DIESEL ENGINE (ISO 9001-2000 certified) Worked as a Production Engineer. From 15 September 2011 to 15 December 2012. RESPONSIBILITIES To set a daily a production target and give production plan to all production section supervisors. To maintain the inventory level of CKD and local parts. To set labor according to production. To maintain productivity and also reduce Bottlenecks and Extra Inventory to maintain Line Balancing concept. To make sure that equipment is always ready for production and do preventive maintenance. TRAININGS AND COURSES: Did 4-weeks internship in July 2010.in PAK ELEKTRON LIMITED 14-km Ferozpur road Lahore Did 4-weeks apprenticeship in August 2009 in the construction 225 MW Combined Cycle Power Plant Bhikki Sheikupura Road Pakistan) Attend a training on Communication Effectively in DESCON HEAD QUATER Lahore Attend a training on Non Destructive Testing at University Level Attend a training on COMPRESS, PV-Elite, and STAAD PRO in DESCON ENGINEERING LIMITED Lahore Attend a training on ASME BPVC in DESCON HEAD QUARTER Lahore
HOBBIES AND INTEREST:
Involved in learning different engineering softwares and their application in practical field. Interested in watching various informative documentaries Interested in Reading Newspaper and books Interested in different sports like Cricket, Basket Ball and Badminton REFERENCE Can be provided on request