Sie sind auf Seite 1von 16

What Does White Smoke From My Vehicle's Exhaust Mean?

When starting an engine from cold, a little white exhaust smoke is normally visible, especially in damp
or cold conditions. The white exhaust smoke is usually down to water vapor which has condensed
inside the engine as it cooled from the last time it was running, entering the cylinder, and the engine
tries to burn it with the fuel. The white smoke is, in fact, steam. However, when the engine has
warmed to its normal operating temperature no smoke of any color should be visible. If there is, it
usually points to a problem.
Okay, we know that white smoke from an exhaust is steam, so, if the white smoke is billowing out of
the tail pipe even when the engine is idling and/or while driving, it tells us that coolant/water is
entering one or more of the cylinders. And it should not be. This can be a symptom of several faults,
*a leak in the cylinder head because of actual damage like a crack or other similar defect,
*a blown cylinder head gasket,
*a warped or twisted cylinder head.
If the engine recently overheated, the cylinder head may have become warped.
A blown or partially failed head gasket is not good it can destroy your engine very quickly. There are
four quick and easy checks you can do that will confirm a head gasket or cylinder head problem. First,
check the coolant level; if it is low, some coolant has been lost somewhere, possibly through a
damaged gasket. While youre checking the coolant look for any visible traces of oil mixed with it, if
there are, it means there is a problem with the cylinder head and /or head gasket. Before leaving the
cooling system, one more thing is to look for bubbles in the coolant in the overflow reservoir (also
known as the expansion tank) while the engine is running. Bubbles in the coolant whilst the engine is
running are a sure sign of a blown or partially failed cylinder head gasket.
Caution The checks on the cooling system should only be done if the engine is still cold, as in most
cases it involves removing the coolant filler cap.
The fourth check is to see if the engine oil is contaminated with coolant. Again this indicates a cylinder
head and/or gasket failure.
A blown head gasket can destroy an engine very rapidly and my recommendation is not to drive the
vehicle at all, but have it towed to a shop for repair.
SMOKE SIGNALS
WHAT IS THE EXHAUST SMOKE FROM YOUR 4WD REALLY TELLING YOU?
WORDS BY PAUL ZIELINSKI, PHOTOGRAPHY BY BRETT SHEARER
If youve ever wondered what the smoke coming from your exhaust means, then youre not alone!
Weve all seen it at one time or another. Youre pushing hard to get your 4WD up a steep, tricky
section of track, only to look back and see plumes of smoke bellowing out from the exhaust. At best,
it can be as innocent as choosing the wrong gear for a hill and causing the engine to labour more
than it wants to. However, in the majority of situations that exhaust smoke is trying to tell you
something. Knowing just what it means can give you a real insight to the condition of the engine
and its fuel system and help you avoid long-term damage.
Diesels are typically known to chug a little exhaust smoke when youre working them hard off-road.
That said, more than a puff or two should begin to ring alarm bells. While there are a number of
high-tech gadgets being added to modern diesel engines designed to reduce diesel smoke, like diesel
particulate filters (DPFs), the cause for a smoky engine remains the same old or new!
To give you every chance at diagnosing diesel smoke from your 4WD, were going to take an in-
depth look a just what the various types of diesel smoke really mean. To cover all bases, weve
called into to Berrima Diesel to catch up with Andrew Leimroth about the tell-tale signs you can
look out for. Armed with this information, youll be in-tune with even the slightest amount of
exhaust smoke from your 4WD, giving you a fighting chance at getting to the bottom of any
problems as early as possible.
So just what do these diesel smoke signals really mean?
What colour smoke?
At the end of the day, any diesel smoke coming out of your exhaust is going to cost you money one
way or another, especially if its left to its own demise. Even a simple fault like a blocked air filter
will see a negative impact on the way your 4WD performs and can lead to its own colour of smoke
out of the exhaust. To help put your finger on any costly problems, lets take a look at the reasons
behind various colours of exhaust smoke.
White smoke
MOST COMMON CAUSE:
INCORRECT IGNITION TIMING
As a general rule, the first cause of a diesel thats blowing white smoke will be related to the
injector pump timing. Diesels rely heavily on high compression and correct injector pump timing to
fire the combustion cycle. Any reduction in the cylinder pressures or fuel delivery will result in an
incomplete combustion process. That white smoke you see from the exhaust is raw or completely
unburnt fuel.
Air entering the fuel line or blockages in the filter are common problems that lead to low injector
pump pressures, Andrew says. A diesel that has the incorrect injector pump pressures can sound
quieter than normal and tends to splutter as you try to rev the engine. Bad injector spray patterns
have been known to cause white smoke too. This comes about when the engine attempts to burn
through dribbling injector droplets when its not atomising the fuel correctly. Dribbling injectors
tend to make the engine noisier than normal and also can contribute to black smoke problems.
A drop in compression can also contribute to white smoke from the exhaust and can be from a
number of different situations. A worn high-kilometre engine, weak compression rings, a blown
head gasket or even the incorrect head gasket being used during a rebuild theyve all been known
to cause a diesel to chug white smoke. Along with white smoke from the exhaust, the engine is
likely to be down on power and difficult to start.
Aside from the typical causes of white smoke, weve seen a number of customers who have been
caught out when rebuilding their diesel engine. One particular customer came to us after having the
1HZ engine in his 80 Series Cruiser rebuilt, as it was now blowing white smoke, Andrew says.
After diagnosing it, it was found that the parts supplier the owner used neglected to inform him that
there is more than one thickness head gasket available for his engine. Subsequently, a thicker gasket
was supplied, creating the sensation of a low-compression engine. All the owners hard work of
rebuilding it was undone.
White smoke from the exhaust is notorious in older diesels with rotary injector pumps, as theyre
adjusted to perform at specific pressures. Common-rail diesels will typically stop running if pump
pressures are restricted as they operate between finer tolerances. In many cases, diagnosing white
smoke from the exhaust should start with a thorough tune, with correct injector pump adjustment a
high priority.
Black smoke
MOST COMMON CAUSE:
OVER-FUELLING
In many cases, tuning a diesel can be a bit of a black art without the right test equipment. Theres
good reason why diesel experts invest big bucks into specialised gear and training to perfect their
skills. Sure, weve all been tempted to fiddle with the settings on our engine in a bid to get more out
of it, but the reality is were likely to be doing more harm than good.
Tuning a diesel is significantly different compared to petrol engines, and its often where most
problems develop. In some respects, the principles that work on a petrol engine are reversed when
it comes to diesel engines. Lean air-fuel ratios equate to cooler engine temperatures, while rich air-
fuel ratios will make the engine run destructively hot, Andrew from Berrima Diesel explains.
The ideal air-fuel ratio (AFR) for a petrol engine will be 14:1. Thats 14 parts of air to every one
part of fuel. Diesel smoke begins for a tuned non-turbo diesel at anything below 14:1 AFR. So you
could say a non-turbo Diesel is clean around 14 to 15:1. By 12 or 13:1 it would be blowing out
oodles of smoke, and by 15 or 16:1 it would be very clean. A tuned turbo-diesel would also blow
smoke but usually this is anywhere under 15 or 16:1.
Any smoke coming out with an accurately measured AFR above 15 or 16 wouldnt be smoke, it
would more than likely be the usual raft of carbon stuck in and around all sorts of ports and the
exhaust just getting burnt out, especially if it clears out after a good hard run, Andrew says.
Without access to the correct test equipment, and experience, youll be simply guessing the AFR
when adjusting the fuel settings on your injector pump.
When you consider the long-term damage that can be done, its just not worth risking an engine
rebuild for the sake of a proper diesel tune. Remember black exhaust smoke is taking money straight
out of your wallet!
Common causes of black (or grey) smoke are incorrect injector pump settings, dribbling injectors or
a blocked air intake system, just to name a few. The end result is an engine thats over-fuelling.
Blue Smoke
MOST COMMON CAUSE:
BURNING OIL
There are a number of reasons why engines will blow blue smoke, but assuming the correct oil is
used, the main culprit behind the problem is oil burning in the cylinders. It only takes a tiny amount
of oil to produce blue smoke from the exhaust. Some engines have been known to continue running
strong for thousands of kilometres even burning small amounts of oil. That said, once an engine
develops an appetite for oil, often the only way to rectify the problem is to repair the failed internal
components.
Oil has a habit of making its way into the cylinders by either passing directly into the combustion
chamber or entering through the intake plumbing. An engine thats breathing heavily or has a
blocked air filter will use oil through the positive crankcase vent (PCV) tube. The PCV is the pipe
running from the rocker cover to the intake plumbing. This is often referred to as blow-by, because
its a result of compression making its way passed the piston rings in turn pressurising the sump.
This forces oil to mist out of the PCV and be drawn into the engine.
An easy way to pick if an engine has excessive blow-by is to carefully open the oil filler cap while
its running. If you feel excessive pressure escaping from the engine filler hole and the engine turns
into a steam train, its likely to need a rebuild very shortly, explained Andrew. An engine can also
blow blue smoke as a result of oil leaking past the oil control rings on the pistons or by leaking
down the valve stem seals into the cylinders.
Always monitor your engine oil consumption between services, as an engine with good compression
can still use oil but not blow visible blue smoke. Blue smoke is a hard one to spot as diesel fuel is
essentially a form of oil. The thing is, good compression will allow the engine to burn oil cleanly in
small volumes and go unnoticed out of the exhaust pipe, Andrew says. Its an easy trap to fall into
with high-compression diesel engines.
When is it chugging?
By pinpointing the exact time your 4WD decides to send those smoke signals, youll be able to put
your finger on exactly why your engine is breathing heavily. Is it blowing smoke down low in the
rev range, under load or when your engine braking down steep hills, only when the engine is cold?
Each of these scenarios, and a heap more, will all be clues to getting to the bottom of the problem.
So what do these tell-tale signs really mean?
When the engine blows smoke at start-up, its often an indication of early signs of wear and tear. In
a cold engine, internal parts are reluctant to do their job efficiently and can expose any underlying
issues like worn bores or sticking piston rings. It isnt until the engine has reached its operating
temperature that oil stops bypassing critical parts.
Blowing smoke under load is a typical sign of worn compression rings, especially when the smoke
is blue. Dark-coloured smoke under load is an indication of a fuel-related problem and can be
caused by incorrect injector pump setting. If you spot exhaust smoke just after youve been
descending down a long steep hill, typically when engine braking, its a strong sign of worn valve
stem seals.
Solving your smoke issues
At the end of the day, most diesel 4WDs tend to puff a small amount of smoke from time to time.
Dont be too alarmed when you first spot traces of smoke, as it doesnt always mean your engine is
destined for a rebuild. On the same token, catching problems early will always save you money in
the long run, so its worth getting a smoky engine check by a diesel expert!
Knowing exactly why your 4WD is blowing smoke will be the key to diagnosing problems before
they develop into something more sinister. The last thing you want is to end up being towed home
because of a problem you could have fixed before your trip away. Getting to know your 4WD, how
much fuel it typically uses, and monitoring any oil consumption closely, will determine just how
deep into your pockets youll have to dip when things turn pear-shaped.
Smoke treatments
DIESEL ENGINE EXHAUST SMOKE ..
The most common cause of diesel engine smoke is a build-up of carbon deposits inside the
engine.

You can often stop diesel engine exhaust smoke for FREE .. plus improve economy and engine
performance, by using our products listed below.

Our products come with a 200% money back product performance guarantee

READ more about ..
How to stop diesel engine exhaust smoke
BLACK smoke
Blue smoke
White/Grey smoke
Diesel exhaust smell
Diesel exhaust soot


FREE "do-it-yourself" Engine Health Check .. please click here .. we expect it will save you a lot of time and
money.


STOP diesel engines SMOKING for FREE .. repeat FREE !!
YES, its true .. YOU GET LESS SMOKE, MORE POWER, LESS ENGINE WEAR, LESS OIL USAGE and LESS OIL
CHANGES .. FREE when you use FTC catalytic fuel additive.

Independent tests by Curtin University West Australia show that using FTC in diesel reduces fuel
consumption by 6 - 8% .. please see our GOOD NEWS for the latest savings calculations, which change with
the price of diesel.
Get these benefits whilst you drive and without touching a spanner .. no expensive inconvenient "downtime" in a
workshop.
That's all good news, but there is a catch .. you must remember to add FTC catalytic decarboniser to your diesel tank
at each refuel.
To enjoy the benefits of FTC decarboniser for FREE .. buy now

To enjoy the benefits of FTC decarboniser for FREE .. buy now

To enjoy the benefits of FTC decarboniser for FREE .. buy now
FTC catalytic decarboniser fuel additive delivers a thorough engine "top sides" decoke including fuel injector tips,
cylinder head, piston crowns, top rings, valves, cylinder walls (glaze and varnish), turbo and exhaust manifold ..
for FREE as a result of fuel savings.

FTC decarboniser not only cuts engine smoke, thereby reducing air pollution, it also delivers more engine power,
reduces fuel and oil consumption, reduces engine wear and reduces the frequency of oil changes .. while you drive,
without you touching a spanner .. no expensive inconvenient "downtime" in a workshop.

FTC decarboniser could save you an engine recondition .. for testimonials click here.

We guarantee a decoke, or 200% money back. Free delivery to your door within New Zealand .. conditions apply.
To enjoy the benefits of FTC decarboniser for FREE .. buy now
To find out more about FTC catalytic decarboniser fuel additive .. click here

Please do your bit to greatly reduce air pollution .. cut SMOKE and CO2 emissions by using FTC



DIESEL Engine Exhaust SMOKE ..
The information below is primarily aimed at diesel engines, since they commonly have the most smoke problems, but
it will also help with petrol engines and 2-stroke petrol/oil fueled engines.
THE COLOUR of diesel engine exhaust smoke and when it occurs can tell you a lot about the internal
condition of a diesel engine.


SMOKE COLOUR ..
Basically there are 3 types of smoke emitted from a diesel engine .. black, blue and white.
Basically, smoke from a diesel engine indicates that something is not right. Smoke should be taken as an
indication that there is a problem existing (or developing) that will potentially shorten the engine life, or
result in unnecessary costs.
Smoke should be regarded as an opportunity to take measures that will save you money in both the long
term and also the short term. At the least, smoke may be due to a simple problem, that is causing poor
combustion efficiency and costing you in excessive fuel bills (eg carboned up engine from excessive idling,
stop start operation or short run times). At the other end of the scale, smoke may be your last chance to act
before a catastrophic engine failure occurs (eg piston seizure, valve or turbocharger failure).

A diesel engine in good condition should produce no visible smoke from the exhaust, under most operating
conditions. A short puff of smoke when an engine is accelerated under load may be acceptable, due to the
lag before the turbocharger speed and air flow is able to match the volume of diesel injected into the
cylinders, but that would only apply to older technology diesel engines. In modern type diesels .. no smoke
at all should be evident.


BLACK smoke ..
To go directly to products that reduce engine BLACK smoke click here
Black smoke is the most common emitted from diesel engines and indicates incomplete combustion of the
fuel. Black smoke causes can vary widely and include ..
Incorrect fuel injection timing .. commonly too retarded.
Fuel injection pump wear, or incorrect settings .. commonly retarded.
Faulty cold start, or faulty advance/retard mechanisms .. commonly retarded.
Incorrect air/fuel ratio setting .. excessive fuel to air ratio.
Under-performing turbocharger .. pressure low, or air leaks.
Air leaks in inter-cooler pipes .. pressure loss.
Dirty or worn fuel injectors .. commonly carbon deposits affecting spray pattern.
Carbon deposits in combustion chambers .. common in lightly loaded engines.
Excessive carbon build-up around exhaust valves and exhaust spaces.
Sticking piston rings .. often due to carbon deposits.
Glazed cylinder cross-hatch .. due to carbon deposits.
Incorrect valve clearances .. often timing error when replacing cam-belts.
Faulty valve stem seals .. rarely.
Engine wear in general .. often misdiagnosed when carbon deposits are the real problem.
Engine oil viscosity too low .. check oil grade against operating conditions.
Cool operating temperatures .. coolant should reach 85C, or higher. Check thermostats.
Exhaust gas recirculation (EGR) system faulty, or blocked with carbon.
Engine overloaded .. reduce load, use lower gear, clean the anti-foul, change propellor pitch.
High altitude operation .. lack of oxygen to complete fuel burn.
Dirty or restricted air cleaner systems .. air intake filter partially blocked.
Poor quality fuel.
Black smoke can occur across the entire operating range, but is usually worst under full power, or during the lag
before the turbocharger boosts air supply to match the fuel usage such as in the early stages of acceleration and
during gear changes. Moderate turbo lag smoke may be acceptable, otherwise black smoke should be hardly visible
in a correctly running engine.
Obviously, worn or damaged components must be replaced .. the earlier you identify and fix the problem, the less
damage will be done. Keep on top of engine tune issues, including valve adjustments, regular servicing of air, fuel
and oil filters. Do not buy fuel from suspect outlets. Dirty engine components, such as fuel injectors can be easily
restored to full cleanliness by using an effective and reliable fuel system cleaner. If you choose from our range of
products, FTC is what you need.

Cleaning the internals of engines is usually considered only possible at physical overhaul, however, we provide two
products to enable vehicle and equipment owners to quickly, safely and cheaply restore full cleanliness to combustion
and exhaust spaces (FTC Decarbonizer) as well as piston rings, oil pumps, oil galleries, oil coolers, piston skirts,
valve gear, etc (DeSLUDGE Flushing Oil Concentrate).

Black smoke is high in carbon or soot, which is an undesirable product of diesel combustion. The combustion of
diesel is a complicated process of breaking down the various hydrocarbon fuel molecules into progressively smaller
and smaller molecules, by extremely rapid burning (explosion) in the presence of oxygen. The main and ideal end
products of combustion are CO2 (carbon dioxide a greenhouse gas) and water. It is believed that the last step in the
process is carbon monoxide (a poisonous gas) to carbon dioxide. This is also the slowest step by far and when
combustion conditions deteriorate some upstream bottle necking occurs in the chain of combustion reactions. This
results (according to some authorities) in polymerization of smaller partly burnt molecules into much larger ones,
which become visible as soot, or black smoke.

To go directly to products that reduce engine BLACK smoke click here



BLUE smoke ..
To go directly to products that reduce engine BLUE smoke click here
Blue smoke is caused by engine lubricating oil burning. The oil can enter the combustion chamber from several
sources including ..
Worn valve guides, or seals
Cylinder &/or piston ring wear
Cylinder glaze
Piston ring sticking
Incorrect grade of oil .. too thin and getting past rings, or valves guides
Fuel dilution of the oil, making it too thin.
Blue smoke is often evident at cold start, which can reflect reduced oil control due to carbon fouling deposits around
the piston rings and/or cylinder glaze (which is actually carbon deposited in the machined cylinder
crosshatching. These tiny grooves actually hold a film of oil, which in turn completes the seal between the
combustion chamber and the oil wetted crankcase).
Blue smoke should not be evident at any stage.
An engine may actually burn oil without the evidence of blue smoke, because good compression burns oil quite
cleanly, however, it is not acceptable for any new engine, or engine in good internal condition to burn large amounts
of lubricating oil .. with or without blue smoke.
Once again, restore physical cleanliness to all components. Replace worn parts where necessary. In some
situations, where the engines are pretty worn, but you just need to keep them in service, cleaning with the previously
mentioned products, followed by effective additional anti-wear protection, will reduce internal stresses on all those
tired components, providing extended service life. Our SupaSLIP achieves this for many of our customers
To go directly to products that reduce engine BLUE smoke click here




WHITE sometimes more GREYISH smoke ..
To go directly to products that reduce engine WHITE smoke click here
White smoke is caused by raw, unburnt fuel passing into the exhaust stream. Common causes include ..
Incorrect fuel injection timing
Defective fuel injectors
Low cylinder compression
Low cylinder compression may be caused by leaking valves, sticking piston rings, ring wear, cylinder wear, or
cylinder glaze.
When white smoke occurs at cold start and then disappears as the engine warms up, the most common causes are
fouling deposits around piston rings and/or cylinder glazing.
Continuous evidence of white smoke indicates a mechanical defect, or incorrect fuel timing.
Water entering combustion spaces will also create white smoke. Faulty head gaskets and cracked cylinder heads or
blocks are a common cause of water entry .. unfortunately, expensive mechanical repair is the only proper solution
here.
To go directly to products that reduce engine WHITE smoke click here


EXHAUST SOOT ..








EXHAUST SOOT continued ..

You may wish to read further about the wear that soot can cause when in engine oil as a result of "blowby", which is
what makes diesel oil look BLACK.
HINT about decarbonising an engine ..
Sometimes an engine can throw out a lot of exhaust soot during the 1st few hours of using FTC catalyst engine
decarboniser .. dont be surprised if you see that happening. But, you may need to clean the surfaces near the
exhaust exit more than usual .. especially transoms with exhaust ports on boats.
FTC catalyst engine decarboniser slowly burns carbon deposits in all combustion and exhaust system areas. Hard
carbon takes longer to remove than soft deposits. The harder the motor is worked the quicker the removal.

PS .. A decarbonised engine will reduce air pollution .. often greatly!!

ENGINE FOULING DEPOSITS (usually CARBON related) ..

Engine Fouling deposits can be safely removed as you drive by adding FTC catalytic engine decarboniser to the
fuel .. and using the companion product DeSLUDGE FOC at the next engine oil change. You may also consider
using SupaSLIP in engine oil to improve performance and reduce frictional wear.





DIESEL engine EXHAUST SMELL

Diesel engine exhaust SMELL can tell you something about the engine condition.
If the idling engine exhaust smells like raw (unburnt) diesel and stings your eyes, then it is likely that either the fuel
injector tip ports (fine fuel spray holes) are partially blocked, or the fuel injection timing is very retarded. Partially
blocked injector tips are quite common in direct fuel injection engines. If the smell and sting occur only at cold start,
the glow-plugs may be faulty, or they may need more heating time before the engine is started.
Note: exhaust gases are highly poisonous .. avoid breathing them, especially in enclosed areas.
To go directly to FTC that cleans fuel injector tips .. without you touching a spanner .. click here

Das könnte Ihnen auch gefallen