0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
9 Ansichten1 Seite
A F S R 2001 Adaptor Part Number Code AVAILABLE WORLDWIDE Easy Installation Options Option 3 Has a pre-machined gasketing surface Extended nose piece fills the seal cavity and allows the particulate to be expelled at the throat Option 4 Option 6 No Flange. Used to fill large cross-section of big-bore box allowing for standard seal installation
A F S R 2001 Adaptor Part Number Code AVAILABLE WORLDWIDE Easy Installation Options Option 3 Has a pre-machined gasketing surface Extended nose piece fills the seal cavity and allows the particulate to be expelled at the throat Option 4 Option 6 No Flange. Used to fill large cross-section of big-bore box allowing for standard seal installation
A F S R 2001 Adaptor Part Number Code AVAILABLE WORLDWIDE Easy Installation Options Option 3 Has a pre-machined gasketing surface Extended nose piece fills the seal cavity and allows the particulate to be expelled at the throat Option 4 Option 6 No Flange. Used to fill large cross-section of big-bore box allowing for standard seal installation
AVAILABLE WORLDWIDE Easy Installation Options Option 3
Has a pre-machined gasketing surface Extended nose piece fills the seal cavity and allows the particulate to be expelled at the throat Removes Particulate from around the seal faces Requires Minimal Flush Option 4 Option 6 No Flange. Used to fill large cross-section of big-bore box allowing for standard seal installation Removes particulate from around the seal faces Fills the seal cavity and allows the particulate to be expelled at the throat Requires Minimal Flush Option 2
Has a pre-machined gasketing surface Longer flange to allow the seal to be moved away from any worn areas on the shaft Removes Particulate from around the seal faces Requires Minimal Flush Option 1 Standard Configuration
Has a pre-machined gasketing surface Pre-machined groove for optional O-Ring Removes Particulate from around the seal faces. Requires Minimal Flush Option 5
Has a pre-machined gasketing surface Extended nose piece fills the seal cavity and allows the particulate to be expelled at the throat Extended front chamber to allow for cartridge seals Removes Particulate from around the seal faces Requires Minimal Flush Note 2 Note 2 Note 2 Note 2 Note 2 Note 2 Note: 1. For no flush applications please contact EnviroSeal 2. Also available with pre-machined gasket groove The information contained in this bulletin is accurate at time of print. The purchaser is responsible for ensuring the dimensions, quantity and applications suitability meet end-user requirements. Most products are "manufactured to order"; therefore, EnviroSeal Engineering Products Ltd. retains the right to individually authorize returns based upon the potential for resale of the products within a reasonable period of time. 1310 Rocky Lake Drive, Waverley Nova Scotia, Canada B2R 1R6 Tel (902) 861-3464 Fax (902) 861-3522 Toll Free North America Only 1-800-884-7325 Website http://www.enviroseal.ca SpiralTrac Adaptor F Flush Required S Split Non-Split N Note 1 or R L or Drawing Number Since each device is unique in regards to sizing, all of this information is included on the drawing. ST01485-230502 Rev A Option 7 Has a pre-machined gasketing surface For use with packing Moves the packing down the shaft to an area with less wear,there-by prolonging the life of the shaft / sleeve Requires Minimal Flush Has a pre-machined gasketing surface Extended nose piece fills the seal cavity and allows the particulate to be expelled at the throat Removes Particulate from around the seal faces Two piece design to avoid first obstruction issues Requires Minimal Flush Shaft Rotation as viewed from Motor End ESC- PTFE 316 - 316 SS 416 - 416 SS BRZ - Bronze ESC Material