Beruflich Dokumente
Kultur Dokumente
Shown from left to right: V-152, V-66, V-82, V-161, V-42, V-17
Your Hydraulic
Control Solution
2.50
1.25
1/2"-
3.50
14NPTF
1.25
.63
3/8"-18NPTF 1/4"-18NPTF 3/8"-18NPTF 2.50 1.44
1.25 1/2"-14NPTF
V-82 V-182 V-8F V-91
3/8"-
18NPTF
3/8"-18NPTF
1/2"-14NPTF
4.00
4.37
2.00
2.00
2.00
132 www.enerpac.com
Flow and Pressure Control Valves
Premounted Manifold Fittings V
For two or four port For additional fittings
manifold with integral see the fitting page
Series
flow control valves, see of the System
the manifold page of the Components section.
System Components section.
Page: 122 Page: 123
Needle Valve V-82: To control cylinder speed. " NPTF female ports. Also suitable
V-82 Can also be used as shut-off valve for gauge snubbing.
for temporary load holding. V-8F: Similar to V-82, but with very
V-182F
" NPTF female ports. fine metering for precise flow control.
V-8F V-182: Same as V-82, but with Not recommended as shut-off valve.
Snubber V-91: Adjustable for metering oil the gauge during high cycling
Valve out of a gauge to prevent snapping applications. " NPTF male and
of gauge pointer when load or female threads for use with GA-1,
V-91
pressure is suddenly released. Also GA-2 or GA-4 gauge adaptors.
suitable as shut-off valve to protect
Manually Operated V-66: Used for load holding V-66F: Similar to V-66, but with very
Check Valve applications with single and double fine metering capability for precise
acting cylinders. Valve is manually flow control.
V-66* opened to allow oil to flow back to Not designed for load holding
V-66F tank when cylinder retracts. applications.
Pressure Relief V-152: Limits pressure developed To increase pressure setting, turn
Valve by the pump in hydraulic circuit, thus handle clockwise. Includes:
limiting the force created by other • 3 ft return line hose kit
V-152* components. Valve opens whenever • ±3% repeatability
preset pressure is reached. • 800-10,000 psi adjustment range.
® 133