e"perience. CCST uestion 2efer to the figure. ' loss of power to :I% ;44 will result in the& '. %evel in C)505 to increase. (. %evel in C)505 to !ecrease. %. 9utput of +D+ =20 to increase. D. 9utput of +D+ =20 to !ecrease. CCST ans!er loss of power to AIC =00' which is a flow controlling mechanism an! opens an! closes the valve' causes the valve to automatically close4Aail)Close! $AC&. Symbols for failure mo!es are on the line between the valve symbol an! the actuator symbol. +he arrow pointing !own' as it !oes here' in!icates AC. If the arrow ha! pointe! up' that woul! in!icate Aail)9pen. +herefore' with the valve close!' hot oil quits flowing through the line. +he purpose of this flow is to transfer heat from the oil to the contents of the process vessel C)505. +D+ =20 measures the !ifference in the temperature of the hot oil flow before an! after it contacts an! transfers heat to the contents of C)505. Since there is no flow' the !ifference in temperatures of the two pipe sections move towar! the same $ambient& temperature. +hus the !ifference in temperatures' an! therefore +D+ =20 output' !ecreases. +he correct answer is D.
Instrumentation, Control and Automation of Water and Wastewater Treatment and Transport Systems: Proceedings of the 5th IAWPRC Workshop Held in Yokohama and Kyoto, Japan, 26 July–3 August 1990