1. The head lamp reflector of a motor car has a maximum rim diameter of 130 mm and maximum depth of 100 mm. Draw the profile of the reflector and name it.(10) 2. Draw the involute of a circle of diameter 40mm.(10) 3. Differentiate first angle projection with third angle projection.(5) 4. Draw the orthographic views for the given isometric views using free hand (15) (1) Front view (2) Top view (3) Side view Mark the dimensions
5. Draw the front view, right side view and top view of the component shown in the figure.(20)
6. Looking in the direction of arrow X, draw the front view, right side view and top view of the component given in figure.(20)
7. Draw freehand the front view , top view and right side view of the object shown in figure. Add by free hand the necessary dimensions.(20)
8. Draw the front view, right side view and top view of the component shown in the figure. Add by free hand the necessary dimensions.(20)
9. Construct a parabola given the distance of focus from the directrix is 60 mm. Also draw a tangent a normal at any point on it.(20) 10. Sketch by free hand the following views of the object shown in figure. The dimensioning is also to be made by free hand. (a) The front view in the direction of arrow (10) (b) The top view (5) (c) The side view, as viewed from the side available for viewing(5) 11. Draw a hyperbola when the distance of the focus from the directrix is 70mm and the eccentricity is 1.5. Draw the tangent and normal to the curve at a point P distance 50mm from the directrix.(20) 12. Construct a hyperbola when the distance between the focus and directrix is 40mm and the eccentricity is 4/3. Draw the tangent and normal at any point on the hyperbola.(20) 13. Draw the involute of a circle of 40 mm diameter. Also draw a tangent and normal to the curve at a point 95 mm from the centre of the circle.(20) 14. A coin of diameter 50m is rolling on a horizontal surface of a table without slipping. Draw the path traced by a point on the circumference of the coin for one revolution and name the curve. Also draw a tangent and normal to any point on the curve.(20) 15. Make the free hand sketches of the front, top and side views of the object shown below.
16. A coir is unwound from a drum of 30 mm diameter. Draw the locus of the free end of the coir for unwinding through an angle of 360. Draw also a normal and tangent at any point on the curve.(20)
17. The eccentricity of the curve is 5/3. The distance from the focus to the vertex of the curve is 30 mm. Draw the curve and also draw tangent and normal for any one point on the circumference on the curve(20).
18. Draw the following views of the given component using free hand sketch (1) Front view (2) Top view (3) Side view (5+5+5+5) (4) Left side view Mark the dimensions
19. Draw the front top and side views of the component shown in figure by free hand
20. A circus man rides a motor bike inside a globe of 6 m diameter. The motor bike has the wheel of 1 m diameter. Draw the locus of the point on the circumference of the motor bike wheel for one complete revolution. Adopt suitable scale. (20)