0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
75 Ansichten4 Seiten
Modeling and diagnostic, Multi-physics of the electric machines (IM, DCM, BLDC, PMSG, and MSAP), parameter estimation, maladjustment of the controller by parameter variations, thermal transfer in EMs, intelligent technique (ANN) apply to the electrical machines for the diagnostic and parameter estimations
Modeling and diagnostic, Multi-physics of the electric machines (IM, DCM, BLDC, PMSG, and MSAP), parameter estimation, maladjustment of the controller by parameter variations, thermal transfer in EMs, intelligent technique (ANN) apply to the electrical machines for the diagnostic and parameter estimations
Modeling and diagnostic, Multi-physics of the electric machines (IM, DCM, BLDC, PMSG, and MSAP), parameter estimation, maladjustment of the controller by parameter variations, thermal transfer in EMs, intelligent technique (ANN) apply to the electrical machines for the diagnostic and parameter estimations
Date and birthplace: 25/05/1982, ELKOUBA ALGIERS Address: Beni Chebana, Beni Ourtilane, Stif, 19030, Algeria. E- mail: has.mel@gmail.com Telephone: 05 53 03 87 39 Magister in Electrical Engineering Option: Electrical machines and their drive UNIVERSITY FORMATION Doctorate in Science at the university of Stif which the topic entitled: Contribution to the intrinsic parametric estimation of electrical machine. 2006 2009: Magister on Electrotechnique Option: electrical machines and their control. Topic: Intrinsic and thermal parameters estimation of the asynchronous machine.
2001 - 2006 : Engineer on Electrical engineering Option: Electric drive. Topic: Estimation of the rotor and stator temperature of an asynchronous machine by an extended kalman filter. Jun 2001: Bachelor Science of nature and life. TEACHING EXPERIENCE Assistant teacher in the electrical engineering department, university setif-1, (course, TP and TD): Electrical machine and drive, control of DC and AC machines, power electronics and assembler 8086 emu8086. Head of Project : Engineering theses (electrical machines): Modeling of the MSAP by the finite element method using Maxwell. Master 2 theses (electric drive): Control of the PMSM by the use of Maxwell Simplorer. Master 2 theses (electric drive): Control and performance calculation of the PMSG used in WT systems. Principal teacher in the department of sociology, university Setif- 2: hardware, software and OP (course, TP, TD). Principal teacher in the department of Arab letter, university Setif-2: hardware, software and OP (course, TP, TD). SCIENTIFIC WORK PERFORMED 1-EDITORIAL MEMBER AND REVIEWER IN INTERNATIONAL JOURNALS 1- Energy and Power (Scientific & Academic Publishing), http://journal.sapub.org/ep, e-ISSN: 2163-1603, p- ISSN: 2163-159X. 2- Electrical and Electronic Engineering (Scientific & Academic Publishing), http://journal.sapub.org/eee, e- ISSN: 2162-8459, p-ISSN: 2162-9455. 3- International Journal of Energy Engineering (Scientific & Academic Publishing), http://journal.sapub.org/ijee, e-ISSN: 2163-1905, p-ISSN: 2163-1891. 4- Journal of Electrical and Electronic Engineering (Science Publishing Group), http://www.sciencepublishinggroup.com/j/jeee, e-ISSN: 2329-1605, p-ISSN: 2329-1613. 5- International Journal of Renewable and Sustainable Energy (Science Publishing Group), http://www.sciencepublishinggroup.com/j/ijrse, e-ISSN: 2326-9723, p-ISSN: 2326-9715. 6- American Journal of Electrical Power and Energy Systems (Science Publishing Group), http://www.sciencepublishinggroup.com/j/epes, e-ISSN: 2326-9200, p-ISSN: 2326-912X. 7- American Journal of Energy Engineering (Science Publishing Group), http://www.sciencepublishinggroup.com/j/ajee, e-ISSN: 2329-163X, p-ISSN: 2329-1648. 8- Sustainable Energy (Science and Education Publishing), http://www.sciepub.com/journal/RSE, e-ISSN: 2372-2142, p-ISSN: 2372-2134. 9- Advanced Energy: An International Journal (AEIJ Publishing Corporation), http://airccse.org/journal/energy, ISSN2349-6231. 10- International Journal of Engineering and Technology Research (IJEATR), ISSN: 2327-0349 (Online), http://www.ijeatr.org. 2-INTERNATIONAL PUBLICATIONS H. Mellah, K E. Hemsas, Stochastic Estimation Methods for Induction Motor Transient Thermal Monitoring Under Non Linear Condition, Leonardo Journal of Sciences (LJS), Issue 20 (January- June), 2012, ISSN 1583-0233, Academic Direct Publishing House, Romaine. H. Mellah, K E. Hemsas, Design and Simulation Analysis of Outer Stator Inner Rotor DFIG by 2d and 3d Finite Element Methods, International Journal of Electrical Engineering & Technology (IJEET), Volume 3, Issue 2, ISSN Print: ISSN 0976-6545, ISSN Online: ISSN 0976-6553, 2012, International Association of Engineering and Management Education (IAEME), India. H. Mellah, K E. Hemsas, Design and Analysis of an External-Rotor Internal-Stator Doubly Fed Induction Generator for Small Wind Turbine Application by FEM, International Journal of Renewable and Sustainable Energy (ijrse), doi: DOI: 10.11648/j.ijrse.20130201.11, Vol. 2, No. 1, January 2013, Science Publishing Group, USA. H. Mellah, K E. Hemsas, Simulations Analysis with Comparative Study of a PMSG Performances for Small WT Application by FEM, International Journal of Energy Engineering (IJEE), Vol.3,No.2, March 2013, Scientific & Academic Publishing, USA. B. Bouhadouza, G. Ahmed, H. Mellah, Application of STATCOM to Increase Transient Stability of Wind Farm , American Journal of Electrical Power and Energy Systems (EPES), doi: 10.11648/j.epes.20130202.14, Vol. 2, No. 2, March 2013, Science Publishing Group, USA. H. Mellah, K E. Hemsas, Comparative Performances Analysis of Different Rotor Types for PMSG Used in Wind Turbine Application, International Journal of Advances in Power Systems (IJAPS), ISSN: 2335-1772, Vol. 1, No. 1, June 2013, IJAPS, Algeria. H. Mellah, K E. Hemsas, Dynamic Design and Simulation Analysis of Permanent Magnet Motor in Different Scenario of fed Alimentation, Journal of Electrical and Control Engineering (JECE), ISSN 2226-2881 (Print) ISSN 2226-289X (Online), Vol.4, No.4, August 2013, American V-King Scientific Publishing, USA. H. Mellah, K E. Hemsas, The Use of EKF to Estimate the Transient Thermal Behaviour of Induction Motor Drive, International Journal of Electrical Engineering (JEE), ,Vol.1, No 1, 2014, David publication company, USA. 3-CONFERENCE PROCEEDINGS 1. H. Mellah and K.E Hemsas, Design and Simulation Analysis of Inner Rotor DFIG by 2D and 3D Finite Element Modelisation,2nd INTERNATIONAL CONFERENCE ON INFORMATION PROCESSING AND ELECTRICAL ENGINEERING, ISBN: 978-9931-9069-0-9, 14-16 April 2012, Tbessa, Algeria, ICIPEE12. 2. H. Mellah and K.E Hemsas, Simulations Analysis With Comparative Study of A PMSG Performances for Small Wind Turbine Application by FEM, 4th INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING,07-09May 2012, USTHB, Algeria, ICEE12. 3. H. Mellah, K.E Hemsas and B. Bouhadouza, Design and Analysis of an External-Rotor Internal- Stator Doubly Fed Induction Generator for Wind Turbine Application, INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING, ISBN: 987-9961-993-4-5, 8-10 October 2012, Batna, Algeria, CEE12. 4. B. Bouhadouza, A. Gherbi and H. Mellah, Application of STATCOM to Increase Transient Stability of Wind Farm, INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING, ISBN: 987-9961-993-4-5, 8-10October, 2012Batna, Algeria, CEE12. 5. H. Mellah and K.E Hemsas, Design of Cascade-Forward Neural Network for Combined DC Machine Parameters Estimation, 16 IEEE INTERNATIONAL POWER ELECTRONICS AND MOTION CONTROL CONFERENCE AND EXPOSITION, 21-24 September, Antalya, Turkey, PEMC14 (Accepted). 4-INTERNATIONAL COMMUNICATION 1. H. Mellah, K.E Hemsas, Modlisation et Surveillance Thermique d'une Machine Asynchrone on prend on compte les Effets non Linire, FIRST CONFERENCE OF POWER ELECTRONICS AND ELECTRICAL DRIVES, 26 27 Octobre 2010, USTO, Oran,ICPEED10. 2. H. Mellah, K.E Hemsas, The use of EKF to estimate the transient thermal behaviour of induction motor drive, THE INTERNATIONAL CONFERENCE ON ELECTRONICS & OIL : FROM THEORY to APPLICATIONS, March 01-02, 2011, Ouargla, Algeria, ICEO11. 3. H. Mellah, K.E Hemsas, Surveillance Thermique Prventive d'une Machine Asynchrone par l'utilisation de Filtre de Kalman Etendue, INTERNATIONAL CONFERENCE ON SYSTEMS AND PROCESSING INFORMATION, 15-17 May, 2011, Guelma, Algeria, ICSIP11. 4. H. Mellah and K.E Hemsas, Dynamic Design and Simulation Analysis of Permanent Magnet Motor in Different Scenario of fed Alimentation, CONFERENCE INTERNATIONAL ON AUTOMATIQUE AND MCATRONIQUE, 22-23 November, 2011, USTO, Oran, Algeria, CIAM11. 5. H. Mellah, K E. Hemsas, Overview of Different Approaches in a Multiphysics Modeling of Induction Motor, INTERNATIONAL CONFERENCE on ELECTRICAL ENGINEERING and AUTOMATIC CONTROL, 24-26 November, 2013 Stif, Algeria, ICEEAC13. 5-JOURNE DES DOCTORANTS 1. H. Mellah, K.E Hemsas, Contribution lEstimation Des Grandeurs Intrinsques Des Machines Electriques, JOURNEE DES DOCTORANTS, 23 Mai 2011, UFAS, JD1. 2. H. Mellah, K.E Hemsas, Multiphysics Modeling of IM, Journe des Doctorants, 25 Avril, 2012, UFAS, Stif, JD2.
RESEARCH FIELDS
Fields of research: Modeling and diagnostic, Multi-physics of the electric machines (IM, DCM, BLDC, PMSG, and MSAP), parameter estimation, maladjustment of the controller by parameter variations, thermal transfer in EMs, intelligent technique (ANN) apply to the electrical machines for the diagnostic and parameter estimations. Member of the LAS laboratory (automatic laboratory of Stif). COMPUTER SCIENCE AND ENGINEERING SOFTWARE KNOWLEDGE Programming languages: Turbo Pascal, Assembleur (8086). Operating systems: Windows, DOS, UNIX, Ubuntu, Opensolaris. Office software: Microsoft Office, Word, power point, Excel, OpenOffice.org. Software (electrical engineering): Matlab /Simulink, Scilab, FEM, FEMLAB, Motor-Cad, ANSYS, Flux2d, Collection ANSOFT (Maxwell 2D, Maxwell 3D, RMxprt, HFSS, Simplorer, Schimatic,). LANGUAGES AND HOBBIES Arab, French, English. Sport: (Foot, hand and volley) ball. Internet, Reading, voyage. Design a website Chess and similar games Owner of the groups Electrical Engineering Algeria (FB, LinkedIn & Google plus)