Subject :- Maintenance work of PMGSY Roads completed 5 years
Package No. :- MP-36 MTN 053 Total PAC- 275.9 lacs (Initial Rehabitation works) PAC (in lac) 17.080 S.No . SOR Item No. Description of Item (With brief specification & reference to book of Specifications Qty Unit Rate Amount 1 2 3 4 5 1 9.1(A) Earthwork in excavation for foundation of structures as per drawing and technical specification Clause 1104 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, sortingout servicible & unservicible materials and disposal of all materials upto 1000 m lead and backfilling with approved material. 366.994 Cu M 143.00 52480 2 11.4 (I) Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:2.5:5 249.985 Cu M 3933.00 983192 3 9.3 (B) Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106 (B) 1000mm dia 17.500 Nos 5099.00 89233 4 7.5 Cement Concrete Slab Construction of un-reinforced and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and construction joints, applying debonding strips, primer, sealant, approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, 48.155 Cu M 5185.00 249684 5 13.2 Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 0.032 MT 61588.00 1957 6 9.8 (A) Providing & Laying Non ISI mark ,Plain Ends(conforming to IS Code 458- 2003} Reinforced Cement Concrete hume Pipe (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, bedding, concrete and masonary work in head wall and parapets. (A) NP3 Pipes 600 mm dia 200 m 1657 331400 1707946 (Routine Maintenace works) PAC (in lac) 60.800 S.No. Package No Name of Road Total Length of Road Unit 1 2 3 4 5 1 MP-36 MTN 053 Marbodi to Chhindgwar 2.190 Per Km. per year 2 MP-36 MTN 053 Mungwani Khurd to Singodi 4.340 Per Km. per year 3 MP-36 MTN 053 Sapapar to Sagar 13.870 Per Km. per year Total 20.40 SSR w.e.f. 15-08-2013 (A) Schedule of Items (Part I of NIT) (B) List of Roads (Part II of NIT) \\vboxsrv\conversion_tmp\scratch_3\243904318.xls.ms_office MTN053 (Renewal of Bituminous surface wokrs) PAC (in lac) 152.040 S.No . SOR Item No. Description of Item (With brief specification & reference to book of Specifications Qty Unit Qty Unit 1 2 3 4 5 Periodical Renewal (Measurable):- 1 5.2 Tack Coat Providing and Applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg per sqm on the prepared bituminous surface cleaned with Hydraulic Broom as per techinal specification Clause 503. 69409.13 Sqm 13 902319 2 5.9 20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. Type-B (ii) Bitumen (S-65) 76350.04 Sqm 136 10383605 3 5.12 Seal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30) 69409.13 Sqm 51 3539865 4 4.8 Construction of Hard Shoulder as per Technical specification clause 4.07 Construction of hard shoulder as per clause 407 with improved soil having CBR value not less than 12 inclusive of all leads and lifts providing 4% camber I/c operations like watering, rolling and compaction etc. as per clause 303.5 1347.75 Cum 281 378718 15204507 (Emergency works) PAC (in lac) 45.98 S.No . SOR Item No. Description of Item (With brief specification & reference to book of Specifications Qty Unit 1 2 3 4 5 This will be issued by the GM PIU as and when required. NIL Total PAC (Part-I + Part-II+Part-III+Part+IV) Total PAC (in lac) 275.900 Asstt. Manager General Manager MPRRDA, PIU-1 SEONI MPRRDA, PIU-1 SEONI (C) Schedule of Items (Part III of NIT) (D) Schedule of Items (Part IV of NIT) \\vboxsrv\conversion_tmp\scratch_3\243904318.xls.ms_office MTN053