Beruflich Dokumente
Kultur Dokumente
www.cyberoam-iview.org
Version 1.0- 30/06/2012
Quick Start Guide
CR-iVU25 | CR-iVU100 | CR-iVU200
Appliances
Elitecore Product
DEFAULTS
Defaul t IP addresses
Ethernet Port IP Address
eth0 172.16.1.1/255.255.0.0
Defaul t Username & Password*
Web Admin Console
*
Username admin
Password cyberoam
By default Cyberoam iView is shipped with
two Administrator Users.
CLI Console (SSH/Serial Connection)
Admi nistrator 1
Username admin
Password admin
Admi nistrator 2
Username root
Password admin
* Username and Password are case sensitive
2 UNDERSTANDING THE APPLIANCE
FRONT PANEL
DVD Drive
HDD 1-2 HDD 3-4
BACK PANEL
Package Contents
Checking the package contents. Check
that the package contents are complete.
One Cyberoam iViewAppliance
One Serial Cable (Null-Modem
Cable)
One Straight-through Ethernet
Cable
OneACAdapter Cable
One Crossover Ethernet Cable
Rackmount kit
One Cyberoam-iView Quick Start
Guide
Documentation CD
Seri al Cabl e
Straight-through
AC Adapter Cable
Ethernet Cabl e
Crossover
Quick Start Guide
Documentation
Ethernet Cable
CD
If any items from the package are missing,
please contact Cyberoam Support at
support@cyberoam-iview.com
USB Port
Power
LED
Power Button
HDD LED
HDD 5-6 HDD 7-8
VGA
USB
Console
System Fans
Power
Outlet
Ports
Port Port
Power
Fan
3
CONNECTING CYBEROAM IVIEW
Ethernet connection
1. Connect one end of the crossover cable into Port eth0 on the Back panel of theAppliance and other
end into the Ethernet Adapter port of Management computer. Change IP address of the management
computer to 172.16.1.2 with subnet mask 255.255.0.0
2. Connect one end of the ethernet cable to Port eth1 on the Back panel of the appliance and other end to your
local network (LAN) switch or management network switch from where all the devices are accessible to
Cyberoam iView as well theAdministrator would be able to manage Cyberoam iView appliance.
3. Connect the AC Power connector into the Back panel of the Appliance and the other end into a
Standard AC receptacle and turn on the power.
4. Start your management computer. FollowingAppliance LEDs light
up: Power - Green indicating thatAppliance is ON
HDD- Green indicating that hard disk isActive
Given below is the table containing various behaviors of appliance LED. Check with the given states
before proceeding.
Appliance LED Behavi or
LED State Description
Power Green Cyberoam iView appliance in ON
Off Cyberoam iView appliance in OFF
HDD Flashing Red Activity going on
Off No activity
Flashing Amber (Left) Network Activity at the Port
Ports - eth0,
Amber (Left) Port is connected at the 100Mbps
eth1, eth2, eth3
Green (Left) Port is connected at the 1000Mbps
Off No link
Blue Operational
RAID5
Red/Blue Synchronizing
Red Hard Disk Failed
5. Once you turn on the power, Cyberoam iView appliance booting process starts.
6. Once the appliance is booted successfully, you will be prompted to login. Logon with default username
'root' and password 'admin'.
7. Change directory to the network- scripts and change IP address of Cyberoam iView appliance using
system-config-network interface.
Select action as Edit a device params
Select device as eth0
Change Static IP address of the device and click OK to save the changes. For the demonstration purpose
IP address is changed to 172.16.13.120.
8. Execute service network restart command to restart service network.
9. Change Console Password
Congratulations!!!
This finishes the basic configuration of Cyberoam iView and you are now ready to use the Appliance.
3
WHAT NEXT
1. Browse to http://172.16.13.120:8000 from the management computer to access Web Admin Console of
Cyberoam iView appliance and logon using default username admin and password cyberoam.
2. Cyberoam iView can be integrated with various devices to generate reports. Refer to
http://sourceforge.net/projects/cyberoam-iview to know integration process with supported devices.
Additi onal Resources
Visit foll owi ng li nks for more informati on on Cyberoam iView
Cyberoam Knowledge Base - http://kb.cyberoam.com
Technical Hel p - http://sourceforge.net/projects/cyberoam-iview/forums/forum/953363
Cyberoam Documentation - http://sourceforge.net/projects/cyberoam-iview/files/
Cyberoam iView Documentation Copyright
2012 Elitecore Technologies Pvt. Ltd. Technologies Ltd. All rights reserved worldwide.
Elitecore has supplied this Information believing it to be accurate and reliable at the time of printing, but is presented
without warranty of any kind, expressed or implied. Elitecore assumes no responsibility for any errors that may
appear in this document. Information is subject to change without notice.
In no event shall Elitecore be liable for any direct, indirect, or incidental damages, including, damage to data arising
out of the use or inability to use this manual.
No part of this work may be reproduced or transmitted in any form or by any means except as expressly permitted
by Elitecore Technologies Pvt. Ltd. Technologies Ltd. This does not include those documents and software
developed under the terms of the open source General Public License.
Cyberoam iView is the trademark of Elitecore Technologies Pvt. Ltd. Technologies Ltd.
If you need commercial technical support for this product please visit www.cyberoam-iview.com.
You can visit open source Cyberoam iView forums at https://sourceforge.net/projects/cyberoam-iview/support to get
support from the project community.
Cyberoam iView License Policy
Cyberoam iView is free software, if you are using and/or enhancing / developing open source applications: you can
redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
Public License for more details.
A copy of the GNU General Public License is available along with this program; see the COPYING file for the
detailed license.
The interactive user interfaces in modified source and object code versions of this program must display Appropriate
Legal Notices, as required under Section 5 of the GNU General Public License version 3.
In accordance with Section 7(b) of the GNU General Public License version 3, these Appropriate Legal Notices must
retain the display of the "Cyberoam Elitecore Technologies Initiative" logo.
Corporate Headquarters
Elitecore Technologies Pvt. Ltd. 904, Silicon Tower, Off C.G. Road,Ahmedabad - 380015, Gujarat.
India. Phone: +91-79-66065606, Fax: +91-79-26407640, Website: www.elitecore.com
Cyberoam
TM
VIEW An Initiative by Elitecore Technologies Pvt. Ltd.
Intelli gent Loggi ng & Reporti ng
www.cyberoam-iview.com Cyberoam iView is the trademark of Elitecore Technologies Pvt. Ltd.