Analysis of rate for providing & erecting Overhead sign
Considering One No. of overhead sign board,
Item No.1/8.7.C.(iii) Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as MoRT&H 304 in ordinary soil by manual means (Without dewatering: upto 3m depth)
Quantity = 1x2x2.1x2.1x2.1 =18.522 Cum @Rs.56.00/Cum Rs.1037.23
Item No.2/8.7.C.(i)
Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification as MoRT&H, 1500, 1700, 2100 PCC Grade M20
Quantity = 1x2x2.1x2.1x0.15 = 1.323 Cum @Rs.4129.00/Cum Rs.5462.67
Item No.3/8.7.C.(ii)
Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification as MoRT&H, 1500, 1700, 2100 RCC Grade M20 using concrete mixer.
Quantity = 1x2x2.00x2.00x0.50+1x2x1.00x1.00x2.00 = 8.00 Cum @Rs.4129.00/Cum Rs.33032.00
Item No.4/13.6 (a) (i)
Supplying, fitting and placing TMT bar reinforcement in sub-structure complete as per drawing and technical specifications With TATA make TMT CRS (Fe500 grade) rebar Quantity= 16mm dia bar 1x2x20x2.50 Rm@1.58 Kg/Rm =158 Kg 12mm dia bar 4x1x2x10x2.52 Rm@0.89 Kg/Rm =179.424Kg 8mm dia stirrup 2x9x4.00 Rm@0.39 Kg/Rm =28.08 Kg T =365.504 Kg Add 10% for lapping, cutting and wastage =36.5504 Kg Total =402.0544 Kg =0.402 MT @Rs.73343.00/MT Rs.29483.89
Analysis- 1
Item No.5/8.7 (A)
Aluminum alloy or galvanized steel trestles and trusses of section and tied as per structural design requirements and approved plans. Truss and vertical support
(1) Anchor Bolt(20mmx750mm), 2x12 =24 Nos. @2.47 Kg/No. =59.23 Kg (2) 300mm NB(H), 2x6 =12.00m @49.5 Kg/m =594.00 Kg (3) 32 NB (M), 1x4x13.2 =52.80m @3.15 Kg/m =166.32 Kg (4) 32 NB (M), 2x15x1.20 =36.00m @3.15 Kg/m =113.40 Kg (5) 32 NB (M) 2x15x0.60 =18.00m @3.15 Kg/m =56.70 Kg (6) 25 NB (M) 2x15x1.50 =45.00m @2.46 Kg/m =110.70 Kg (7) 25 NB (M) 2x11x1.20 =26.40m @2.46 Kg/m =64.94 Kg (8) 50 NB stiffener 2x2.5 =5.00m @6.17Kg/m =30.85 Kg (9) 25mm base (800x800mm), 2Nos. =1.28 Sqm @196.2Kg/sqm =251.136 Kg (10) Stiffener plate(300x300mm), 4x2 Nos. =0.72 Sqm @78.5 Kg/sqm =56.52 Kg (11) 10mm th plates(200x600mm), 2x2 Nos. =0.48 Sqm @78.5 Kg/sqm =37.68 Kg (12) 12mm th plates(900x900mm), 2x2 Nos. =3.24 Sqm @94.2 Kg/sqm =305.208 Kg (13) Stiffener at top 10mm th, 4x2 Nos. =0.96 sqm @78.5 Kg/sqm =75.36 Kg
(400x300mm) (14) 10mm th Rib (400x300mm), 1x2 Nos. =0.04 sqm @78.5 Kg/sqm =3.14 Kg (15)10mm th plates (200x200mm), 2x2 Nos. =0.16 sqm @78.5 Kg/sqm =12.56 Kg (16) 10mm th plates(100x100mm), 1x2 Nos. =0.02 sqm @78.5 Kg/sqm =1.57 Kg (17) 6mm th pedestal(800x800mm), 1x2 Nos.=1.28sqm @47.1 Kg/sqm =60.288 Kg Total =1999.652 Kg Add 10% for lapping, cutting & wastage =199.965 Kg Total =2199.617 Kg =2.20 MT @Rs.98500.00/MT Rs.216700.00
Item No.6/8.7 (B)
Providing retro reflective sign board of high intensity grade reflective sheeting conforming to ASTMD4956 BIII specifications having approved pattern over its entire surface bonded on to 2 mm thick aluminum sheeting, the entire face of the sign shall be covered & bounded with yellow/ white/red/blue high intensity grade with distinctive nod pattern on front site with heat lamp vacuum applicator machine only. Quantity= 2x13.20x1.20 = 31.68 Sqm @Rs.6000.00/sqm Rs.190080.00 Total = Rs.475795.79 Say = Rs.4,75,796.00 (Rupees Four Lakhs Seventy Five thousands Seven Hundreds and Ninety Six only)