DOMAIN Power electronics OBJECTIVE The main object of this project is Thus it provides an appropriate real-life testing platform for micro-grid connections to power grid. Simulation results show the effectiveness and the accuracy of this MICROGRID model to emulate real-life scenarios. INTRODUCTION Pollution and the instability of oil prices, the development of renewable energy based Distributed Generation (DG) is moving fast to meet the worldwide urgent needs of utilizing clean energy sources and minimizing costs. Researchers have identified many renewable energy sources. Among these sources, photovoltaic (PV) can be considered the most essential resource because of the ubiquity, abundance, and sustainability of solar radiant energy. A photovoltaic system consists of the whole assembly of solar cells, connections, protective parts, supports, etc. The advantages of a PV system far outweigh its disadvantages. Some of the advantages include low maintenance, unattended operation, long life, no fuel, no fumes, easy to install, and it is modular. HARDWARE/SOFTWARE REQUIREMENTS SOFTWARE REQUIREMENTS: MATLAB SIMULINK Or cad / PS Pice HARDWARE REQUIREMENTS: PIC Controller EXISTING SYSTEM High initial setup costs and low output in cloudy weather. A PV system together with the power conditioning device and an inverter can be used as a micro-grid setup. Several works have focused on developing PV model and the charge controller DISADVANTAGES Some of the research efforts also designed power conditioning devices and their controller. This work focuses on the development of a micro-grid model that consists of PV arrays, power conditioning devices and an inverter with overall and individual controller. PROPOSED SYSTEM AIM: The main aim of this project is these types of WECSs can reduce the power fluctuations due to the wind speed changes, and it is also possible to achieve maximum power points tracking (MPPT), because the back-to-back pulse width modulation (PWM) converter controls the generated power. ABSTRACT: This project presents a complete mathematical model of a micro-grid set up with PV arrays. The model consists of mathematical design and development of PV module and arrays, power conditioning DC/DC converter and the inverter set up. These designs are integrated with an inverter controller that controls the voltage at a power system bus. The complete system is used as a micro-grid set up connected to a power grid. Testing and evaluations of the micro-grid is then conducted using off-grid and on-grid studies. The uniqueness of the proposed modeling and control includes a complete models details of micro-grid set up with PV system, power conditioning devices and load model, the utilization of an MPPT and feedback controller to control the output voltage and current. Thus it provides an appropriate real-life testing platform for micro-grid connections to power grid. Simulation results show the effectiveness and the accuracy of this Microgrid model to emulate real-life scenarios. SIMULATION DIAGRAM: ADVANTAGES: In this project, for applying the proposed scheme to the wind turbine, the performances of the generating operation are analyzed. In this, the stator flux reference frame is used for the vector control of SEF-DFIG. In order to find the angle of stator flux, the state observer is applied. APPLICATIONS: For Domestic applications. Industry and Traction. Grid systems. PV generation station. REFERENCES: [1] H. Tsai et al , Development of Generalized Photovoltaic Model Using MATLAB/SIMULINK, Proceedings of the World Congress on Engineering and Computer Science, San Francisco,CA, October 22-24, 2008. [2] S. Jain and V. Agarwal, New current control based MPPT technique for single stage grid connected PV systems, Energy Conversion & Management, V48, pp. 625-644, 2007. [3] F.M. Gonzalez-Longatt, Model of Photovoltaic Module In Matlab, Latin American Congress of Students of Electrical Engineering, 2005. [4] D.A. Neamen, Semiconductor Physics and Devices. New York: Mcgraw-Hill, 2003. [5] R. Chenni et al, A detailed modeling method for photovoltaic cells, Energy, V32, pp. 1724-1730, 200