Beruflich Dokumente
Kultur Dokumente
Wall-mounted
Distribution Kit
Distribution
height in mm
Order-No: Piece
C H
5267 3 585-00 1x 10 + 1 333 465
5267 3 585-01 2x 10 + 1 565 697
5267 3 585-02 3x 10 + 1 798 930
Order
data:
Order-No: Description Weight/Pack Pack
6577 1 011-04 LSA-PLUS wall-mounted distribution kit 5.100 kg 1 piece
25 w w w . a d c k r o n e . c o m + 4 9 - ( 0 ) 3 0 - 8 4 5 3 - 1 8 1 8
Main Distribution Frames
overview
Other Wall-Mounted Distribution Racks
These wall-mounted distribution racks can directly accommo-
date LSA PROFIL modules with a fixing dimension of 95 mm.
They cannot be refitted for modules with a fixing dimension of
75 mm.
Material:
The rack is made of C sections, galvanized, yellow-chromized
Profil rod: stainless-steel tubing, 12 mm in diameter
Wall-mounted Distribution Rack,
KWGP
2 to 5-vertical versions are available
Bay spacing (centre to centre): 210 mm
Cable support and equipotential bar installed
A sufficient number of cable guide rings is fitted both hori-
zontally and vertically
Can be installed in data distribution cabinets (but not
directly in 19" racks)
- 2-vertical version in cabinets with a width/depth
of 600 mm
- 3-vertical version in cabinets with a width/depth
of 800 mm
Arrangement in rows with other rack units is possible but
the jumpering volume has to be taken into account; Exten-
sion kit, consisting of standard parts, must be ordered
separately (Order-No: 6569 3 052-11)
Fixing and standard parts (lateral C rails, connecting ele-
ments, M6 and M8 nuts, bolts, toothed washers) for instal-
lation in the KRONE cabinet system must be ordered
separately (Order-No: 6569 2 052-02)
Delivery:
Fully assembled; material for fixing the rack to the wall is inclu-
ded in the delivery
Order
data:
6569 KWGP Capacity for
LSA PROFIL-
modules with a
pitch
No. of
verticals
Dimensions
H x W x D
in mm
Usable
profile
rod length
Weight Pack
2
003
15 2/160 2 x 80 pairs 2 355 x 530 x 140 200 mm 2.500 kg 1 piece
16 2/300 2 x 170 pairs 2 555 x 530 x 140 400 mm 5.500 kg 1 piece
17 2/500 2 x 250 pairs 2 758 x 530 x 140 575 mm 7.000 kg 1 piece
18 2/800 2 x 410 pairs 2 1108 x 530 x 140 925 mm 8.000 kg 1 piece
19 3/1200 3 x 410 pairs 3 1108 x 730 x 140 925 mm 11.000 1 piece
20 2/1400 2 x 690 pairs 2 1758 x 530 x 140 1575 mm 12.000 1 piece
21 4/1600 4 x 410 pairs 4 1108 x 930 x 140 925 mm 16.000 1 piece
22 3/2100 3 x 690 pairs 3 1758 x 730 x 140 1575 mm 16.500 1 piece
23 4/2200 4 x 570 pairs 4 1483 x 930 x 140 1300 mm 20.000 1 piece
24 4/2800 4 x 690 pairs 4 1758 x 930 x 140 1575 mm 26.500 1 piece
25 5/3500 5 x 690 pairs 5 1758 x 1130 x 1575 mm 29.500 1 piece
26 w w w . a d c k r o n e . c o m + 4 9 - ( 0 ) 3 0 - 8 4 5 3 - 1 8 1 8
Main Distribution Frames
overview
Other Wall-Mounted Distribution Racks
Basic-kit
The LSA-PROFIL wall-mounted distributor rack kit is used for
fast installations onto walls or into 19" systems. Up to 3 profile
bays can be mounted on the 500 mm long C rails. Each profile
bay consists of two round rods (800 mm long) and 2 LSA pro-
file rods 95, as well as a sufficient number of jumper guides,
which are mounted on the upper and lower C rails. Each bay
can accommodate up to 32 LSA PROFIL modules, which means
that a 3-bay distributor can accommodate up to 960 pairs
(gross). Banks of distributor racks can be set up; however, they
should be limited to two basic kits (the jumpering volume has
to be taken into account!).
Two kits are available
With the exception of the two 500 mm long C profile rails in
the basic kit, the two kits contain the same components and
the same number of each component.
Material:
Rack: steel C profiles, galvanized (yellow-chromized)
Mounting plates: sheet-steel
Jumper guide hooks: plastic
Scope of delivery:
Kit (unassembled), without fixing material
LSA PROFIL
Wall-mounted
Distribution Kit
Basic kit
Extension kit
Dimensions:
Total width: 500 mm
Refer to illustration for individual
dimensions
Order example:
Requirement for one distributor with 3 bays:
One basic kit (Order-No: 9101 1 010-00) and
Two extension kits (Order-No: 9101 1 011-00)
Order
data:
Order-No: Description Weight/Pack Pack
9101 1 010-00 LSA PROFIL wall-mounted distribution rack, basic kit 3.000 kg 1 set
9101 1 011-00 LSA PROFIL wall-mounted distribution rack, extension kit 2.000 kg 1 set
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are contin-
uously improving our products, ADC KRONE reserves the right to change specifications without prior notice. At
any time, you may verify product specifications by contacting our world headquarters office in Minneapolis. ADC
Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces
its patents.
1317439 8/05 Original 2005 ADC Telecommunications, Inc. All Rights Reserved
Internet: www.adckrone.com
For a listing of ADCs global sales office locations, please refer to our web site.
ADC GmbH, Beeskowdamm, 3-11, 14167 Berlin, Germany
Phone: +49-(0)30-8453 1818 Fax: +49-(0)30-8453 1703