Beruflich Dokumente
Kultur Dokumente
8
SOIC8
D SUFFIX
CASE 751
8
1
12080
ALYW
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= PbFree Package
PIN CONNECTIONS
NOTE:
MARKING
DIAGRAM
A
L
Y
W
G
SW1
http://onsemi.com
SW2
SW3
Divide Ratio
80
40
40
20
40
20
20
10
In
VCC
SW1
Out
In
SW3
SW2
GND
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
Symbol
Value
Unit
VCC
0.5 to 7.0
Vdc
TA
40 to 85
Tstg
65 to 150
IO
10
mA
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
NOTE: ESD data available upon request.
MC12080
Table 3. ELECTRICAL CHARACTERISTICS (VCC = 4.5 to 5.5 V; TA = 40 to 85C, unless otherwise noted.)
Characteristic
Symbol
Min
Typ
Max
Unit
ft
0.1
1.4
1.1
GHz
ICC
3.7
5.0
mA
Vin
400
100
1000
1000
VIH
VCC 0.5 V
VCC
VCC + 0.5 V
VIL
Open
Open
Open
Vout
0.8
1.2
Vpp
mVpp
1. Assumes 8.0 pF load and 1.1 GHz input frequency (typical), IO at VCC = 5.0 V and TA = 25C.
In
In
Q
Q
1
D
0
Out
SW1
SW3
SW2
VCC
C1
SW1
In
SW2
50
W
SW3
C2
In
Out
Gnd
CL
RL
http://onsemi.com
2
External Components
C1 = C2 = 1000 pF
C3 = 0.1 mF
CL = 8.0 pF (Including Scope and Jig Capacitance)
RL = 820 W for 10 at 1.1 GHz
MC12080
+15.0
+1257.40
+10.0
+707.11
+223.61
OPERATING
WINDOW
5.0
AMPLITUDE (dBm)
+397.64
10.0
15.0
20.0
+125.74
+70.71
+39.76
+22.36
25.0
+12.57
30.0
+7.07
35.0
+3.98
40.0
+2.24
45.0
+1.26
50.0
0
200
400
600
800
1000
1200
1400
mVrms
+5.0
+0.71
1800
1600
FREQUENCY (MHz)
Divide Ratio = 10; VCC = 5.0 V; TA = 25C
2000
1200
800
mVpp
1600
400
200
400
600
800
1000
1200
1400
1600
0
1800
FREQUENCY (MHz)
Shipping
SOIC8
98 Units / Rail
MC12080DG
SOIC8
(PbFree)
98 Units / Rail
MC12080DR2
SOIC8
SOIC8
(PbFree)
Device
MC12080D
MC12080DR2G
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
3
MC12080
PACKAGE DIMENSIONS
SOIC8 NB
CASE 75107
ISSUE AG
X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 75101 THRU 75106 ARE OBSOLETE. NEW
STANDARD IS 75107.
A
8
B
1
0.25 (0.010)
G
C
DIM
A
B
C
D
G
H
J
K
M
N
S
X 45 _
SEATING
PLANE
0.10 (0.004)
H
D
0.25 (0.010)
Z Y
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.33
0.51
1.27 BSC
0.10
0.25
0.19
0.25
0.40
1.27
0_
8_
0.25
0.50
5.80
6.20
INCHES
MIN
MAX
0.189
0.197
0.150
0.157
0.053
0.069
0.013
0.020
0.050 BSC
0.004
0.010
0.007
0.010
0.016
0.050
0 _
8 _
0.010
0.020
0.228
0.244
SOLDERING FOOTPRINT*
1.52
0.060
7.0
0.275
4.0
0.155
0.6
0.024
1.270
0.050
SCALE 6:1
mm
inches
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
4
MC12080/D