Beruflich Dokumente
Kultur Dokumente
,
North Maharashtra University, Jalgaon
2014-15
S.E. (Old)(All Branches) l_May/June, 2014.
Examination Circular No. 103 of 2014
REVISED Programme of S.E. [ All Branches ( Term-I & II )Course:Jully 2002
& Course:Jully 2006 (Old) Examinations, May/June, 2014
1 Candidates are required to be present at their respective places of the
Examinations fifteen minutes before the time for the paper.
2 Candidates are forbidden to take any Study material into the
Examination Hall, with a view to prevent malpractices at the time of
examinations.
3 Candidates are requested to see the Notice-Board at their respective
places of examination regularly, for changes if any notified later, in the
programme.
4 Candidates are requested to note the date, day, time and place of
every paper on every day.
5 Candidates are permitted to use stencils at the time of examinations.
6 The exchange or loan of slide-rules, drawing instruments or other
materials used in the examination, is not permitted while the
examination is in progress. Candidates must bring their own
instruments and will not be allowed to borrow from each other under
any circumstances.
7 Use of non-programmble, battery operated Electronic Calculator of
pocketsize is allowed. The Exchange of Calculator is not allowed.
8 No request for any special concession, such as change in time or day
fixed for the University Examination on religious or any other ground,
shall be granted.
9 All the affiliated Engineering Colleges will be the centres for S.E.
Examinations. The students of the colleges will appear at their
respective college centre only.
10 University reserves right to make timely changes in examination
time-table.
11 The written examinations will be conducted in the following order
NORTH MAHARASHTRA UNIVERSITY, JALGAON
REVISED PROGRAMME OF THE S.E. (TERM-I) (ALL BRANCHES) EXAMINATIONS
[Course : July, 2002 And Course : July, 2006 ]Examinations,May/June, 2014
The branch wise written examinations of S.E. (TERM-I) (Old) will be conducted as per the following schedule.
BRANCH Friday Monday Wednesday
16.05.2014 19.05.2014 21.05.2014
Subject and Time: 10.00 a.m. to 1.00 p.m.
Civil
1050 Engineering Mathematics-III 1020 Surveying I
1010
Strength of Materials
1040 Geo. Tech. Engg. (Old - 1999)
Mechanical 1010 Engineering Mathematics-III 1030 Material Science 1020 Strength of Materials
Automobile 1010 Engineering Mathematics-III 1030 Material Science 1020 Strength of Materials
Production 1010 Engineering Mathematics-III 1030 Material Science 1020 Strength of Materials
Electronics 1020 Electronic Instrumentation 1050 Semiconductor Devices and Circuits 1040 Electrical Circuits and Machines
Electrical 1010 Engineering Mathematics-III 1040 A.C. Circuit and Transformer 1020 Electrical Engineering Materials
Elec. &
Telecomm.
1020 Electronic Instrumentation 1050 Semiconductor Devices and Circuits 1040 Electrical Circuits and Machines
Elec. & Commun. 1020 Electronic Instrumentation 1050 Semiconductor Devices and Circuits 1040 Electrical Circuits and Machines
Instrumentation 1050 Engineering Mathematics-III 1020 Industrial Instrumentation 1010 Analog Circuits and Analysis
Computer 1050 Engineering Mathematics-III
1030 Digital Systems and Microprocessor 1040
1020
Industrial Management and Economics
Linear Circuits Analysis (Old - 1999) 1010 Electronic Devices & Circuits (Old-1999)
Information
Technology
1050 Engineering Mathematics-III
1030
1011
Digital Systems and Microprocessor
Analog & Digital Electronics (Old-1999)
1040 Industrial Management and Economics
Chemical 1050 Engineering Mathematics-III 1020 Chemistry II 1040 Strength of Materials
Biotechnology 1050 Engineering Mathematics-III 1030 Fluid Flow & Solid Handling 1040 Process Calculations
REVISED PROGRAMME OF THE S.E. (TERM-I) (ALL BRANCHES) EXAMINATIONS
[Course : July, 2002 And Course : July, 2006 ]Examinations,May/June, 2014
BRANCH Friday Monday Wednesday
23.05.2014 26.05.2014 28.05.2014
Subject and Time: 10.00 a.m. to 1.00 p.m.
Civil 1040 Concrete Technology 1030 Building Construction & Materials
Mechanical 1040 Manufacturing Engineering I 1050 Applied Thermodynamics
Automobile 1050 Manufacturing Technology I 1040 Applied Thermal Engineering
Production 1040 Manufacturing Science I -- 1050 * Machine Drawing and Computer
Graphics
* (Time: 10.00 am to 2.00 pm)
Electronics 1030 Digital Circuits and Logic Design 1010 Electronics Materials and Components
Electrical 1050 Electrical Measurement I 1030 Applied Thermodynamics
Elec. & Telecomm. 1030 Digital Circuits and Logic Design 1010 Electronics Materials and Components
Elec. & Commun. 1030 Digital Circuits and Logic Design 1010 Electronics Materials and Components
Instrumentation 1030 Automatic Control System
1040 Metrology and Machine Tools
Computer 1010
Analog Electronics
1020
Discrete Structure and Graph Theory
Information
Technology
1010
Programming Paradigm and
Methodology
1020 Discrete Structure and Graph Theory
Chemical 1010
Chemistry I
1030 Unit Operation I (Fluid Mechanics)
Biotechnology 1010 Concepts in Biotechnology 1020
Microbiology
TERM-I (II CHANCE)
* Please Note the Timings. Note: - Students Should Mention Subject Code No. On Answerbook With
Name of Subject.
Post Box No. 80,
NMU / S.E. / 7-B / 2203/ 2014
Date: 16/04 / 2014
DR.D.N.GUJARATHI
CONTROLLER OF EXAMINATIONS
NORTH MAHARASHTRA UNIVERSITY, JALGAON
REVISED PROGRAMME OF THE S.E. (TERM-II) (ALL BRANCHES) EXAMINATIONS
[Course : July, 2002 And Course : July, 2006 ]Examinations,May/June, 2014
The branch wise written examinations of S.E. (TERM-II) (Old) will be conducted as per the following schedule.
DAY and DATE Friday Monday Wednesday
30.05.2014 02.06.2014 04.06.2014
BRANCH Subject and Time: 10.00 a.m. to 1.00 p.m.
Civil 1100 Fluid Mechanics I 1110 Engineering Geology 1070 Theory of Structures- I
Mechanical 1110 Fluid Mechanics 1120 Electrical Machines and Industrial Electronics 1130 Manufacturing Engineering II
Automobile 1100
Fluid Mechanics 1110 Electrical Machines and Industrial Electronics 1120 Manufacturing Technology II
Production 1090 Fluid Mechanics 1100 Electrical Machines and Industrial Electronics 1110 Manufacturing Science II
Electronics 1110 Analog Communication 1070 Management Science 1100 Networks and lines
Electrical 1070
Digital Computational Techniques and
Programming
1060 Analog and Digital Electronics 1100 Power Systems I
Elec. & Telecomm. 1110 Analog Communication
1070 Management Science 1100 Networks and lines
Elec. & Commun. 1110 Analog Communication 1070 Management Science 1100 Networks and lines
Instrumentation 1100 Thermal & Fluid Power Engineering 1110 Electrical Machines 1180 Transducers
Computer 1100
1101
Digital System Design
Signal Conditioner & Data
Converters (Old) (July - 2002)
1070
Microprocessor-I
1080 Data Structures & Files
1080 Computer Architecture Old-1999)
Information
Technology
1100
1101
1070
Information Theory
Object Oriented Programming Methodology
( Old) (July-2002)
Principles of Communication Engineering
(Old - 1999)
1070 Microprocessor-I 1080 Data Structures & Files
1080
Computer Programming in C / C++ (Old-1999)
Chemical 1070 Chemical Processes I 1090
Unit Operation II
[ Mechanical Operations]
1100 Process Calculation
Biotechnology 1100 Biostatistics 1070 Biochemistry 1090 Immunology
REVISED PROGRAMME OF THE S.E. (TERM-II) (ALL BRANCHES) EXAMINATIONS
[Course : July, 2002 And Course : July, 2006 ]Examinations,May/June, 2014
2
DAY and DATE Friday Monday Wednesday
06.06.2014 09.06.2014 11.06.2014
BRANCH Subject and Time: 10.00 a.m. to 1.00 p.m.
Civil 1080 Surveying II 1090
* Building Design & Drawing
* (Time:10.00am to
02.00pm)
1090
Highway, Airport&Bridges
(Old-1999)
Mechanical 1100 Industrial Engineering 1090 Theory of Machines I
Automobile 1090 Industrial Engineering 1080 Theory of Machines I Electrical Technology (Old - 1999)
Production 1080 Industrial Engineering 1070 Theory of Machines Material Forming I ( Old-99 )
Electronics 1090
Engineering Mathematics-III
1080
Electronic Circuits and Applications
Electrical 1080 Network Analysis 1090 Electrical Machines - I 1090 Fluid Mechanics &
Machinery (Old - 1999)
Elec. & Telecomm. 1090 Engineering Mathematics-III 1080
Electronic Circuits and Applications
Elec. & Commun. 1090 Engineering Mathematics-III 1080
Electronic Circuits and Applications
Instrumentation 1090 Computational Techniques 1070
Digital Techniques
1070
Engineering Materials
(Old-1999)
Computer 1090 Computer Organization 1110 Data Communications 1031 Network Analysis (Old-2002)
1060 Analog Circuits (Old-1999) 1071
Digital Circuits & Logic Design (Old - 2002)
Information Technology 1090 Computer Organization 1110
Data Communications
1060
Computer Organization & Architecture
(Old-1999)
Chemical 1080 Chemistry - III 1010 Industrial Economics & Management
Biotechnology 1080 Chemistry 1110 Process Heat Transfer
TERM-II (I CHANCE)
* Please Note the Timings. Not: :- Students Should Mention Subject Code No. On Answerbook With Name of
Subject.
Post Box No. 80,
NMU / S.E. / 7-B / 2203 / 2014
Date: 16/04 / 2014
DR. D.N.GUJARATHI
CONTROLLER OF EXAMINATIONS