Beruflich Dokumente
Kultur Dokumente
College of Engineering
1, Kennedy Road , Pune 411 001
Ph.No. (020) 26058587 Ext.1107, Telefax No.(020) 26058943, email : contact@aissmscom.com
INVITATION FOR QUOTATIONS
Conditions :-
1. Please give contact person name, mobile number, E-mail address for correspondence
regarding purchases.
2. The date and time regarding Purchase Committee meeting will be communicated to supplier
through E-mail and also will be displayed on our website.
3. The terms and conditions should be clearly mentioned.
4. Advance payment is not given to any supplier.
5. Please quote as per our specification and make only. Please note that rates for other items
which are not in the list should not be quoted.
6. Please quote the rate for consumable items as per available packing size in the market.
7. Quotations should be submitted within 15 days from the date of publishing the purchase
advertisement in newspapers.
8. In case of furniture items, supplier has to submit a sample to the Office if required by the
College.
9. The quotations should be submitted in the name of The Principal, AISSMS College of
Engineering, 1 Kennedy Road, Pune 411 001.
MECHANICAL ENGINEERING
SOFTWARE
(ME-1)
Sr.No.
Item/
Instrument
Name
Specifications Qty
1 MSC ADAMS Educational License 05
sheets
2 MATLAB MATLAB Basic 2012, SIMULINK, ALL TOOLBOXES 10
Users
SOFTWARE
(ME-2)
Sr.No.
Item/
Instrument
Name
Specifications Qty
3 FFT Analyzer Portable, 4 channel FFT analyzer for Vibration and Noise
Measurement
1.Inputs: Sampling rate: upto 100kS/s or more
Range: 10mV to 10Vrms
A/D converter: 24 bits
Coupling: AC, DC, ICP Floating, AC Floating, DC Floating, GND
2. Narrow Band FFT
3. Frequency range: 100mHz to 40kHz with user selectable
steps
Resolution: Upto 6400 lines.
Average domain: Time/spectral
Average mode: Linear, exponential, peak hold & ref peak hold
averaging
Weighing windows: Uniform, Hamming, Hanning, flat-top,
Kaiser Bessel.
4. The analyzer should be either AC or DC powered.
1
5. The analyzer should have easy software upgradability for
1/n Octave analysis.
6. Triaxial accelerometer:
a) Sensitivity: 100mV/g 5%
b) Freq. Range: 0.5Hz to 5000Hz 10%
c) Measurement Range: 50g
d) Magnetic mounting
e) Side connector with appropriate 3m cable for connection
to analyzer
7. Microphone for Noise Measurement
8. The bidder should have the facility to provide support,
calibration and maintenance for the analyzer locally.
EQUIPMENTS
(ME-3)
S.no
.
Item Specification
Approx.Rat
e (Rs.)
1 Engine Test
Setup 3
Cylinder, 4
Stroke, Petrol
(Computerized)
for Specification see Annexure I
1
Annexure 1
Engine Type 3 Cylinder,
4 Stroke, Petrol (MPFI), water cooled, Power 27.6Kw at
5000 rpm, Torque 59 NM at 2500rpm,stroke 72 mm,
bore 66.5mm, 796 cc,CR 9.2
Dynamometer Product 230: Type eddy current, water cooled
Air box M S fabricated with orifice meter and manometer
Fuel tank Capacity 15 lit with glass fuel metering column
Calorimeter Type Pipe in pipe
Piezo sensor Range 5000 PSI, with low noise cable
Crank angle sensor Resolution 1 Deg, Speed 5500 RPM with TDC pulse.
Data acquisition device NI USB-6210, 16-bit, 250kS/s.
Temperature sensor Type RTD, PT100 and Thermocouple, Type K
Temperature,Type two wire, Input RTD PT100, Range 0100 Deg C,
transmitter O/P 420mA, Type 2wire, I/P TC, Range 01200 Deg C
Load indicator Digital, Range 0-50 Kg, Supply 230VAC
Load sensor Load cell, type strain gauge, range 0-50 Kg
Fuel flow transmitter DP transmitter, Range 0-500 mm WC
Air flow transmitter Presure transmitter, Range (-) 250 mm WC
Software EnginesoftLV Engine performance analysis software
Rotameter Engine cooling 100-1000 LPH; Calorimeter 25-250 LPH
Pump Type Monoblock
Overall dimensions W 2000 x D 2750 x H 1750 mm