Sie sind auf Seite 1von 17

AIEEE-PAPER 2009

NARAYANA IIT ACADEMY


Presents

AIEEE - 2009
S O LU T I O N

South Delhi : 47-B, Kalu Sarai, New Delhi – 110016 • Ph.: 011-42707070, 46080611/12
North/West Delhi : 15, Central Market, West Punjabi Bagh, New Delhi – 110026 • Ph.: 011-45062651/52/53
East Delhi : 32/E, Patparganj Village, Mayur Vihar Phase – I, Delhi – 110 091• Ph.: 011-22750043/52
Gurgaon : M-21, Old DLF Colony, Sector-14, Gurgaon • Ph.: 0124-3217791/92
Dwarka : 317/318, Vikas Surya Galaxy, Main Mkt, Sector–4, Dwarka, New Delhi - 110 075 • Ph.: 011-45621724/25

You can also download from:


website: www.narayanadelhi.com · www.narayanaicc.com · e-mail: info@narayanadelhi.com
1
AIEEE-PAPER 2009

CODE A

Instructions
1. The test is of 3 hours duration.
2. The Test Booklet consists of 90 questions. The maximum marks are 432.
3. There are three parts in the question paper. The distribution of marks subject wise in each part is as
under for each correct response.
Part A - PHYSICS (144 marks) – Questions No. 1 to 2 and 9 to 30 consist FOUR (4) marks each
and Question No. 3 to 8 consist EIGHT(8) marks each for each correct response.
Part B - CHEMISTRY (144 marks) – Questions No. 31 to 39 and 46 to 60 consist FOUR (4) marks
each and Question No. 40 to 45 consist EIGHT (8) marks each for each correct response.
Part C - MATHEMATICS (144 marks) – Questions No. 61 to 82 and 89 to 90 consist EIGHT (8)
marks each and Questions No. 83 to 88 consist EIGHT (8) marks each for each correct
response.
4. Candidates will be awarded marks as stated above in instruction No. 5 for correct response of each
question ¼ (one fourth) marks will be deducted for indicating incorrect response of each question.
No deduction from the total score will be made if no response is indicated for an item in the answer
sheet.
5. Use Blue/Black Ball Point Pen only for writing particulars/marking responses on Side-1 and Side-2
of the Answer Sheet. Use of pencil is strictly prohibited.
6. On completion of the test, the candidate must hand over the Answer Sheet to the Invigilator on duty
in the Room/Hall. However, the candidates are allowed to take away this Test Booklet with them.

PHYSICS (iv) F → D + E + ε
1. STATEMENT – 1 where ε is the energy released ? In which
For a charged particle moving from point P to reaction is ε positive ?
point Q, the net work done by an electrostatic (1) (i) and (iv) (2) (i) and (iii)
field on the particle is independent of the path (3) (ii) and (iv) (4) (ii) and (iii).
connected point P to point Q. Key. (1)
STATEMENT – 2 Sol. Binding energy per nucleon of each product is
The net work done by a conservative force on an less than that of each reactants.
object moving along a closed loop is zero.
(1) Statement – 1 is True, Statement – 2 is 3. A p–n junction (4) shown in the figure can act
False. as a rectifier. An alternating current source (V)
(2) Statement – 1 is True, Statement – 2 is is connected in the circuit.
True; Statement – 2 is a correct explanation
for Statement – 1. D
~ R
(3) Statement – 1 is True, Statement – 2 is V
True; Statement – 2 is not the correct
explanation for Statement – 1. The current (I) in the resistor (R) can be shown
(4) Statement – 1 is False, Statement – 2 is by :
True. I
Key (3)
t
Sol. Statement–2 is not the correct explanation of (1)
statement–1. I
2.
(2) t
BC D E
I
Eb
A F
(3) t
I
M
The above is a plot of binding energy per
(4) t.
nucleon Eb, against the nuclear mass M; A, B,
C, D, E, F correspond to different nuclei. Key. (3)
Consider four reactions : Sol. Only +ve current passes though the diode.
(i) A + B → C + ε
4. The logic circuit shown below has the input
(ii) C → A + B + ε
waveforms 'A ' and 'B' as shown. Pick out the
(iii) D + E → F + ε
correct output waveform.
2
AIEEE-2009-CODE-A

A through its end. Its maximum angular speed is


Y
B ω. Its centre of mass rises to a maximum height
Input A of
Input B 1 l2 ω2 1 lω
(1) (2)
3 g 6 g
Output is :
1 l 2 ω2 1 l 2 ω2
(3) (4) .
2 g 6 g
(1)
Key. (4)
1  ml 2  2
(2) Sol.   ω = mgh
2 3 
ω2 l 2
(3) ⇒ h= .
6g
Q
(4) . 8. Let P(r) = r be the charge density
Key. (1) πR 4
Sol. Y is true only when both A and B are true. Y = distribution for a solid sphere of radius R and
AB. total charge Q. For a point 'p' inside the sphere
5. If x, ν and a denote the displacement, the at distance r1 from the centre of sphere, the
velocity and the acceleration of a particle magnitude of electric field is
executing simple harmonic motion of time Q
(1) 0 (2)
period T, then, which of the following does not 4πε0 r12
change with time ? Qr12 Qr12
(1) a 2 T 2 + 4π2 ν 2 (2) aT/x (3) (4) .
4πε 0 R 4 3πε0 R 4
(3) aT + 2πν (4) aT/ν.
Key. (3)
Key. (1) r1
Sol. x = A sin ωt Q 4 πr 3 dr
v = Aω cos ω t
Sol. E=
4πε0 r12 ∫ πR 4
r =0
a = −Aω2 sin ωθ Q r12
Hence, a 2T 2 + 4π2ν 2 = .
4πε0 R 4
2
2  2π 
= sin 2 ωθ ( − Aω2 )   4π 2 (Aω)2 cos θ
 ω 9. The transition from the state n = 4 to n = 3 in a
4π (Aω) [sin θ + cos2 θ]
2 2 2 hydrogen like atom results in ultraviolet
radiation. Infrared radiation will be obtained in
which is time independent.
the transition from :
Option (2) however may not be regarded as the
(1) 2 → 1 (2) 3 → 2
correct answer because it is not mentioned that
x, the displacement is measured from (3) 4 → 2 (4) 5 → 4.
equilibrium position. Key. (4)
6. In an optics experiment, with the position of the Sol. Energy of transition is less only in this case.
object fixed, a student varies the position of a
convex lens and for each position, the screen is 10. One kg of a diatomic gas is at a pressure of 8 ×
adjusted to get a clear image of the object. A 104 N/m2. The density of the gas is 4 kg/m3.
graph between the object distance u and the What is the energy of the gas due to its thermal
image distance v, from the lens, is plotted using motion ?
the same scale for the two axes. A straight line (1) 3 × 104 J (2) 5 × 104 J
4
passing through the origin and making an angle (3) 6 × 10 J (4) 7 × 104 J.
of 45º with the x–axis meets the experimental Key. (2)
curve at P. The coordinates of P will be 5
Sol. E = nRT
f f  2
(1) (2f, 2f) (2)  ,  5
2 2 = PV
(3) (f, f) (4) (4f, 4f). 2
Key. (1) 5 m
= P
7. A thin uniform rod of length l and mass m is 2 P
swinging freely about a horizontal axis passing
3
AIEEE-PAPER 2009

5 (8 × 104 )(1) µ0I  π 


= × = 5 × 104 J . (4)  2(b _ a) + (a + b)  .
2 4 4π  3 
This question contains Statement–1 and Key. (2)
Statement–2. Of the four choices given after the 1 µ I1 1
statements, choose the one that best describes Sol. B = of 0  − 
12 2 a b
the two statements. µ0 I(b − a)
11. STATEMENT – 1 = .
The temperature dependence of resistance is 24ab
13. Due to the presence of the current I1 at the origin
usually given as R = R0 (1 + α ∆t). The
:
resistance of a wire changes from 100 Ω to 150
(1) the forces on AB and DC are zero
Ω when its temperature is increased from 27ºC (2) the forces on AD and BC are zero
to 227ºC. This implies that α = 2.5 × 10–3 /ºC. (3) the magnitude of the net force on the loop
STATEMENT – 2
II  π 
R = R0 (1 + α ∆t) is valid only when the change is given by 1 µ 0  2(b − a) + (a + b) 
in the temperature ∆T is small and ∆R = (R – 4π  3 
R0) << R0. (4) the magnitude of the net force on the loop
(1) Statement – 1 is True, Statement – 2 is µ II
is given by 0 1 (b − a) .
False. 24ab
(2) Statement – 1 is True, Statement – 2 is Key. (2)
r r r
True; Statement – 2 is a correct explanation Sol. F = I( l × B) = 0 .
for Statement – 1.
14. A mixture of light, consisting of wavelength 590
(3) Statement – 1 is True, Statement – 2 is
nm and an unknown wavelength, illuminates
True; Statement – 2 is not the correct
Young's double slit and gives rise to two
explanation for Statement – 1.
overlapping interference patterns on the screen.
(4) Statement – 1 is False, Statement – 2 is
The central maximum of both lights coincide.
True.
Further, it is observed that the third bright fringe
Key (4) of known light coincides with the 4th bright
Sol. R0 is the resistance at 0ºC.
fringe of the unknown light. From this data, the
Directions : Question numbers 12 and 13 are
wavelength of the unknown light is :
based on the following paragraph.
(1) 393.4 nm (2) 885.0 nm
(3) 442.5 nm (4) 776.8 nm.
A current loop ABCD is held fixed on the plane
Key. (3)
of the paper as shown in the figure. The arcs BC
λd
(radius = b) and DA (radius = a) of the loop are Sol. Fringe width =
joined by two straight wires AB andCD. A D
steady current I is flowing in the loop. Angle 3
∴ λunknown = × 590 nm
made by AB and CD at the origin O is 30º. 4
Another straight thin wire with steady current I1 = 442.5 nm .
flowing out of the plane of the paper is kept at 15. Two points P and Q are maintained at the
the origin. potentials of 10V and –4V, respectively. The
B
work done in moving 100 electrons from P to Q
A is
a
(1) – 9.60 × 10–17 J (2) 9.60 × 10–17 J
O 30º I (3) – 2.24 × 10–16 J (4) 2.24 × 10–16 J.
Key. (4)
b D Sol. W = 100 ×1.6 × 10 −19 ×14
C = 2.24 ×10−16 J .
12. The magnitude of the magnetic field (2) due to 16. The surface of a metal is illuminated with the
the loop ABCD at the origin (O) is light of 400 nm. The kinetic energy of the
(1) zero ejected photoelectrons was found to be 1.68 eV.
µ 0 I(b − a) The work function of the metal is : (hc = 1240
(2)
24ab eV.nm)
µ0I  b − a  (1) 3.09 eV (2) 1.41 eV
(3)
4π  ab 
(3) 1.51 eV (4) 1.68 eV.
Key. (2)

4
AIEEE-2009-CODE-A
y
hc h
Sol. = φ + (KE) max
λ t1 2t 3t 4t t
t
1 1
1240 1

⇒ = φ + 1.68 (4) .
400 Key. (3)
⇒ φ = 1.41 eV Sol. When ball strikes the surface its velocity will be
17. A particle has an initial velocity of 3iˆ + 4ˆj and reversed so correct option is (3).
20. A charge Q is placed at each of the opposite
an acceleration of 0.4iˆ + 0.3jˆ . It speed after 10 s corners of a square. A charge q is placed at each
is : of the other tow corners. If the net electrical
(1) 10 units (2) 7 2 units force on Q is zero, then Q/q equals:
(3) 7 units (4) 8.5 units. (1) −2 2 (2) –1
Key. (2) 1
r r r (3) 1 (4) − .
Sol. V = u + at 2
r
V = (3iˆ + 4ˆj) + 10(0.4iˆ + 0.3j)
ˆ Key. (1)
r
ˆ
V = 7i + 7 jˆ KQ Kq
r Sol. 2
= 2 2
⇒ | V |= 7 2 2a a
18. A motor cycle starts from rest and accelerates Q
⇒ =2 2
along a straight path at 2 m/s2. At the straight q
point of the motor cycle there is a stationary Q
electric siren. How far has the motor cycle gone So, = −2 2
q
when the driver hears the frequency of the siren -q Q
at 94% of its value when the motor cycle was at
rest ?
(Speed of wound = 330 ms–1)
(1) 49 m (2) 98 m
(3) 147 m (4) 196 m. -q
Q
Key. (2)
18. V = 2aS = 4S
21. A long metallic bar is carrying heat from one of
 330 − V  its ends to the other end under steady–state. The
Also, 94 = 100  
 330  variation of temperature θ along the length x of
33 × 6 the bar from its hot end is best described by
⇒ = 4S which of the following figures ?
10
⇒ S = 98 m θ

19. Consider a rubber ball freely falling from a x


height h = 4.9 m onto a horizontal elastic plate. (1)
Assume that the duration of collision is θ
negligible and the collision with the plate is
totally elastic.
Then the velocity as a function of time and the x
(2)
height as a function of time will be :
v y θ
v1 h
o t t x
(1) (3)
v y
+v1 θ
h
o t
t
–v1 x
(2) (4) .
v y
+v1 h Key. (2)
o t t T − T T − Tx
1 2t1 3t1 4t1 t Sol. 1 2 = 1
–v1 L x
(3)
KA KA

5
AIEEE-PAPER 2009

Key. (3)
Tx Sol. p1 = p o sin 2 π(x − 1)t
T1 T2
p 2 = po sin 2π(x)t
x p 3 = po sin 2 π(x + 1)t
T1
p = p1 + p3 + p 2

T1 = po sin 2π(x − 1)t + p o sin 2π(x + 1)t + p o sin 2πxt

T2
= 2p o sin 2πxt cos 2πt + p o sin 2 πxt
= p o sin 2πxt[2 cos πt + 1]
x ⇒ fbeat = 2.
L
 T − T2 
⇒ Tx = T1 −  1 x p
 L 
t
22. A transparent solid cylindrical rod has a .
2
refractive index of . It is surrounded by air.
3 24. The height at which the acceleration due to
A light ray is incident at the mid–point of one g
gravity becomes (where g = the acceleration
end of the rod as shown in the figure. 9
due to gravity on the surface of the earth) in
θ terms of R, the radius of the earth, is :
The incident angle θ for which the light ray R
(1) 2R (2)
grazes along the wall of the rod is : 2
1  3 (3) R/2 (4) 2R .
(1) sin −1   (2) sin −1  
2  2  Key. (1)
GM GM
 2   1  Sol. =
(3) sin −1   (4) sin −1  . 9R 2 (R + h)2
 3  3
⇒ 3R = R + h
Key. (4)
⇒ h = 2R
2
Sol. 1 × sin 90 = sin(90 − α) 25. Two wires are made of the same material and
3 have the same volume. However wire 1 has
cross–section area A and wire 2 has cross–
α 90-α sectional area 3A. If the length of wire 1
θ increases by ∆x on applying force F, how much
force is needed to stretch wire 2 by the same
3 amount ?
⇒ cos α =
2 (1) F (2) 4F
3 1 (3) 6F (4) 9F.
So sin α = 1 − = Key. (4)
4 2
Sol. l1 = 3l 2
2
Now, 1 × sin θ = sin α F l
3 Y= × 1 …(i)
A ∆x
2 1 1
= × = F' l1 / 3
3 2 3 Y= × …(ii)
3A ∆x
1 F l1 F' l
⇒ θ = sin −1 × = × 1
3 A ∆x 3A 3∆x
23. Three sound waves of equal amplitudes have F' = 9F
frequencies (ν – 1), ν, (ν + 1). They superpose 26. In an experiment the angles are required to be
to give beats. The number of beats produced per measured using an instrument. 29 divisions of
second will be the main scale exactly coincide with the 30
(1) 4 (2) 3 divisions of the vernier scale. If the smallest
(3) 2 (4) 1. division of the main scale is half–a–degree
6
AIEEE-2009-CODE-A

(= 0.5º), then the least count of the instrument = 400 R


is:
(1) one minute (2) half minute 29. The work done on the gas is taking it from D to
(3) one degree (4) half degree. A is
Key. (1) (1) –414 R (2) +414 R
29 (3) –690 R (4) +690 R.
Sol. 1VSD = MSD Key. (1)
30
L.C. = 1 MSD – 1 VSD P 1
Sol. WDA = nRT ln i = 2 × R × 300 ln
1 Pf 2
= MSD
30 = – 414 R
1 1
= × 0.5 = = one minute 30. The net work done on the gas in the cycle
30 60
27. ABCDA is
(1) zero (2) 276 R
E (3) 1076 R (4) 1904 R.
L Key. (2)
R1 30. WABCD = WAB + WBC + WCD + WDA
R2 WBC = 2 × R × 500 ln 2
S
= 690 R
An inductor of inductance L = 400 mH and
WCD = 2 × R × (300 − 500)
resistors of resistances R1 = 2 Ω and R2 = 2 Ω
are connected to a battery of emf 12 V as shown = – 400 R
in the figure. The internal resistance of the W ABCD = 400R + 690R + ( −400R) − 414R

battery is negligible. The switch S is closed at t = 276 R.


= 0. The potential drop across L as a function of CHEMISTRY
time is : 31. Knowing that the Chemistry of lanthanoids (Ln)
12 −3t is dominated by its +3 oxidation state, which of
(1) 6 e–5t V (2) e V
t the following statements is incorrect?
(1) Because of the large size of the Ln (III)
 −t

(3) 6  1 − e 0.2  V (4) 12 e–5t V. ions the bonding in its compounds is
  predominantly ionic in character.
Key. (4) (2) The ionic sizes of Ln (III) decrease in
tR
− 2 general with increasing atomic number.
Sol. eL = E e L (3) Ln (III) compounds are generally
2
− t colourless
eL = 12e .4 (4) Ln (III) hydroxides are mainly basic in
eL = 12 e–5t. character.
Key. (3)
Directions : Question numbers 28, 29 and 30 Sol. Most of the Ln(III) compounds are coloured due
are based on the following paragraph. to f – f transition.

Two moles of helium gas are taken over the 32. A liquid was mixed with ethanol and a drop of
cycle ABCDA, as shown in the P–T diagram. concentrated H2SO4 was added. A compound
5 A B with a fruity smell was formed. The liquid was:
2×10
(1) CH3OH (2) HCHO
P (Pa) (3) CH3COCH3 (4) CH3COOH
5
Key. (4)
1×10 C D Sol. Fruity smell is evolved due to formation of
T ester. CH3COOH + CH3CH2OH
300K T 500K conc. H 2SO 4
28. Assuming the gas to be ideal the work done on  → CH3 COOC2 H5
ethylacetate
the gas in taking it from A to B is : (ester)
(1) 200 R (2) 300 R
(3) 400 R (4) 500 R. 33. Arrange the carbanions,
Key. (3) (CH3)3 C, CCl3 (CH3)2 CH, C6H5 CH 2 , in order of
Sol. W AB = nR(Tf–Ti) their decreasing stability:
= 2 × R(500 − 300)

7
AIEEE-PAPER 2009

(1) C6H5 CH 2 > CCl3 > (CH3 )3 C > (CH 3 ) 2 CH (2) More easily liquiefiable gases are adsorbed
readily
(2) (CH3)2 CH > CCl3 > C 6 H5 CH 2 > (CH3 )3 C
(3) Under high pressure it results into multi
(3) CCl3 > C6 H 5 CH 2 > (CH 3 ) 2 CH > (CH 3 )3 C molecular layer on adsorbent surface
(4) (CH 3 )3 C > (CH 3 )2 CH > C6 H5 CH 2 > CCl3 (4) Enthalpy of adsorption (∆Hadorption) is low
Key. (3) and positive.
Sol. Due to the –I effect of three chlorine atoms and Key. (4)
Sol. Enthalpy of adsorption in physisorption is
due to pπ - dπ bonding CCl3− is extra stable.
negative
Carbanion follow stability order. ∆G = ∆H - T∆S
CCl3– > C6H5 CH 2 > (CH3 ) 2 CH > (CH 3 )3 C As the entropy decreases (∆S = –ve) the ∆H
must be negatie having a high magnitude.
34. The alkene that exhibits geometrical isomerism Therefore, the spontaneous adsorption will have
is: negative enthalpy change.
(1) propene (2) 2-methyl propene
(3) 2-butene (4) 2-methyl-2-butene 38. Which of the following on heating with aqueous
Key. (3) KOH, produces acetaldehyde?
Sol. 2-butene may exist as (1) CH3COCl (2) CH3CH2Cl
H3C CH3 H3C H (3) CH2ClCH2Cl (4) CH3CHCl2
Key. (4)
Sol. OH
H H H CH3 aq KOH
(cis) (trans) CH 3CHCl2 → H3C HC
OH
Due to restricted rotation around double bond it
exhibits geometric isomerism.
H
−H 2O
35. In which of the following arrangements, the H3C C
sequence is not strictly according to the property O
written against it?
(1) CO2 > SiO2 < SnO2 < PbO2 : increasing 39. In an atom, an electron is moving with a speed
oxidizing power of 600 m/s with an accuracy of 0.005%.
(2) HF < HCl < HBr < HI : increasing acid certainity with which the position of the electron
strength can be located is (h = 6.6 × 10–34 kg m2 s–1, mass
(3) NH3 < PH3 < As H3 < SbH3 : increasing of electron em = 9.1 × 10–31kg):
basic strength (1) 1.52 × 10–4m (2) 5.01 × 10–3m
(4) B < C < O < N : increasing first ionization (3) 1.92 × 10 m –3
(4) 3.84 × 10–3 m
enthalpy Key. (3)
Key. (3) Sol. ∆v = . = 9.1 × 10–31 kg
Sol. As the size of the central non-metal increasing ∆x = ?
appreciably, the basicity of hydride decreases. h
∆x × m ∆v ≥
36. The major product obtained on interaction of 4π
phenol with sodium hydroxide and carbon h
∆x ≥
dioxide is: 4m∆vπ
(1) benzoic acid (2) salicylaldehyde 6.6 × 10−34
(3) salicylic acid (4) phthalic acid ≥
4 × 9.1 × 10 −31 × 0.03 × 3.14
Key. (3) ≥ 1.9248 × 10–3
Sol. According to Kolbe’s reaction
OH OH
40. In a fuel cell methanol is used as fuel and
COOH oxygen gas is used as an oxidizer. The reaction
+
+ NaOH + CO 2 →H is
CH3OH(l) + 3/2O2(g) → CO2(g) + 2H2O(l)
At 298 K standard Gibb’s energies of formation
for CH3OH(l), H2O(l) and CO2 (g) are –166.2, –
37. Which of the following statement is incorrect
regarding physissorptions? 237.2 and –394.4 kJ mol–1 respectively. If
(1) It occurs because of van der Waal’s forces.
8
AIEEE-2009-CODE-A

standard enthalpy of combustion of methanol is 3( −0.036) − 2( −0.439)


–726 kJ mol–1, efficiency of the fuel cell will be: E° =
1
(1) 80% (b) 87% = 0.770V
(3) 90% (4) 97%
Key. (4) 44. On the basis of the following thermochemical
Sol. 2 (–237.2) –394.4 + 166.2 +
data: (∆f G° H (aq) =0)
= –474.4 – 394.4 + 166.2
702.6 H2 O(l) → H+ (aq) + OH– (aq); ∆H = 57.32 kJ
× 100 = 96.77 1
726 H2 (g) + O2(g) → H2O(l); ∆H = –286.20 kJ
2
41. Two liquids X and Y form an ideal solution. At The value of enthalpy of formation of OH– ion
300 K, vapour pressure of the solution at 25°C is:
containing 1 mol of X and 3 mol of Y is 550 (1) –22.88 kJ (2) –228.88 kJ
mm Hg. At the same temperature, if 1 mol of Y (3) +228.88 kJ (4) –343.52 kJ
is further added to this solution, vapour pressure Key. (2)
+
of the solution increases by 10 mm Hg. Vapour Sol. 57.32 = ∆Hf(OH(aq)) + ∆Hf (H (aq) - ∆Hf
pressure (in mmHg) of X and Y in their pure (H2O(l)
states will be respectively: ∆Hf (OH(aq)) = 57.32 + (–286.20)
(1) 200 and 300 (2) 300 and 400 286.20 – 57.32 = –228.88
(3) 400 and 600 (4) 500 and 600
Key. (3) 45. Copper crystallizes in fcc with a unit cell length
0 0
Sol. 0.25PA + 0.75PB = 550 mm of 361 pm. What is the radius of copper atom?
0
0.20 PA0 + 0.80 PB = 650 mm (1) 109 pm (2) 127 pm
0 0
PX + 3PY = 2200 (3) 157 pm (4) 181 pm
Key. (2)
PX0 + 4PY0 = 2800 Sol. For FCC
PY0 = 600 mm 2 a = 4r
PX0 = 400 mm 2 × 361
∴ r= = 127pm
4
42. The half life period of a first order chemical
reaction is 6.93 minutes. The time required for
46. Which of the following has an optical isomer?
the completion of 99% of the chemical reaction
(1) [CO(NH3 )3Cl]+
will be (log 2 = 0.301)
(2) [CO(en) (NH3)2]2+
(1) 230.3 minutes (2) 23.03 minute
(3) [CO(H2 O)4 (en)]3+
(3) 46.06 minutes (4) 460.6 minutes (4) [CO(en)2(NH3)2]3+
Key. (3)
Key. (4)
0.693 Sol. NH3
Sol. K= = 10 −1 min −1
6.93
2.303 100
10−1 = log
t 1
2.303 × 2 en Co en
t= −1
= 46.06 min
10

43. Given:
E 0Fe3+ /Fe =–0.036V, E 0Fe2+ / Fe =–0.439V. The value NH3
of standard electrode potential for the change, en
+
Fe3(aq) + e− → Fe2+ (aq) will be:
(1) –0.072 V (2) 0.385 V
(3) 0.770V (4) –0.270V en Co
Key. (3)
Sol. Fe3+ + 3e → Fe, E o = −0.036V
Fe2+ + 2e → Fe, E° = –0.439V NH3
Fe3+ + e → Fe2+, NH3

9
AIEEE-PAPER 2009

47. Solid Ba(NO3)2 is gradually dissolved in a 1.0 × Sol. In highest oxidation states transition metals
–4
10 M Na2CO3 solution. At what concentration form anionic complexes rather than that of
2+
of Ba will a precipitate being to form? (Ksp for cationic complexes.
–9
Ba CO3 = 5.1 × 10 ):
(1) 4.1 × 10–5M (2) 5.1 × 10–5M 51. Calculate the wavelength (in nanometer)
(3) 8.1 × 10 M –8 –7
(4) 8.1 × 10 M associated with a proton moving at 1.0 ×
Key. (2) 103 ms–1
Sol. Na2CO3 → 2Na+ + CO23− (Mass of proton = 1.67 × 10–27 kg and h = 6.63 ×
-4
10–34Js):
1 × 10 M (1) 0.032 nm (2) 0.40 nm
BaCO3 Ba2+ + CO23− (3) 2.5 nm (4) 14.0 nm
2+
KSP = [Ba ] [ [CO23− ] Key. (2)
h 6.63 × 10−34
5.1 × 10-9 = [Ba2+ ] [1 × 10-4] Sol. λ = =
−9
mv 1.67 × 10− 27 × 1× 103
5.1× 10 6.63 × 10−34
[Ba2+ ] = −4 =
1× 10 1.67 × 10−24
= 5.1 × 10-5 M = 0.40 × 10-9 m
48. Which one of the following reactions of Xenon = 0.40 nm
compounds is not feasible?
(1) XeO3 + 6HF → XeF6 + 3H2O 52. A binary liquid solution is prepared by mixing
(2) 3XeF4 + 6H2O → 2Xe + Xe O3 + 12 HF + n-heptane and ethanol. Which one of the
1.5 O2 following statement is corret regarding the
(3) 2XeF2 + 2H2O → 2Xe + 4HF + O2 behaviour of the solution?
(4) XeF6 + RbF → Rb [XeF7] (1) The solution formed is an ideal solution
Key. (1) (2) The solution is non-ideal, showing +ve
deviation from Raoult’s Law
49. Using MO theory predict which of the following (3) The solution is non-ideal, showing –ve
species has the shortest bond length? deviation from Raoult’s Law
(1) O22+ (2) O2+ (4) n-heptane shows +ve deviation while
(3) O2– (4) O22– ethanol shows –ve deviation from Raoult’s
Key. (1) Law.
Sol. O22+ Key. (2)
1 Sol. On mixing n-heptane and ethanol; strong
B.O. = [N6 − Na] interactions are replaced by weak interaction
2 and hence it kes non-ideal solution with positive
1 deviation.
= [10 − 4]
2
B.O.= 3 53. The number of stereoisomers possible for a
So bond length is shortest compound of the molecular formula CH3 – CH
= CH – CH (OH) – Me is:
50. In context with the transition elements, which of (1) 3 (2) 2
the following statements is incorrect? (3) 4 (4) 6
(1) In addition to the normal oxidation states, Key. (3)
the zero oxidation state is also shown by Sol. CH3 H H CH3
these elements in complexes. C C H H C C
H C H
(2) In the highest oxidation states, the OH HO
Me Me
transition metal show basic character and
form cationic complexes. trans mirror image
(3) In the highest oxidation states of the first H
OH
five transition element (Sc to Mn), all the CH3 C
HO
H
4s and 3d electrons are used for bonding. C C CH3 C CH 3
H3 C
(4) Once the d5 configuration is exceeded, the H H C C
H H
tendency to involve all the 3d electrons in
bonding decreases. cis mirror image
Key. (2)
54. The IUPAC name of neopentane is:
(1) 2 – methylbutane
10
AIEEE-2009-CODE-A

(2) 2, 2 – dimethylpropane :OH


(3) 2 – methylpropane 2Ph CHO  → Ph CH 2 OH + pHCO 2
(4) 2, 2 – dimethylbutane The slowest step is:
Key. (2) (1) the attack of : OH– at the carboxyl group
Sol. CH3 (2) the transfer of hydride to the carbonyl
CH3 C CH3 group
(3) the abstraction of proton from the
CH3
carboxylic group
2, 2 dimethyl propane (4) the deprotonation of pH CH2OH
Key. (2)
55. The set representing the correct order of ionic Sol. O
radius is: PhCHO OH Ph H
(1) Li+ > Be2+ > Na+ > Mg2+
OH
(2) Na+ > Li+ > Mg2+ > Be2+
+ + 2+ 2+ ..
(3) Li > Na > Mg >Be : O: O O
rds.
(4) Mg2+ > Be2+ >Li+ > Na+ Ph C OH + Ph C H Ph C OH + Ph - CH O
2
Key. (2) H
Sol. Na+ Be2+ Mg2+ Li+ Proton transfer is rate determining step
1.02A 0.39A 0.72A0 0.76A0
0 0

Na+ > Li+ > Mg2+ > Be2+


59. Which of the following pairs represents linkage
56. The two functional groups present in a typical isomers?
carbohydrate are: (1) [Cu(NH3)4] [Pt Cl4] and
(1) —OH and —COOH [Pt (NH3)4 ] [CuCl4]
(2) —CHO and —COOH (2) [Pd (P Ph3 )2 (NCS)2] and
(3) >C = O and —OH [Pd (P Ph3 )2 (SCN)2]
(4) —OH and —CHO (3) [CO (NH3)5 NO3]SO4
Key. (3) and [CO(NH3)5SO4]NO3
Sol. Carbohydrates are primarily hydroxyl carbonyl (4) [PtCl2 (NH3)4] Br2 and [Pt Br2(NH3)4]Cl2
compound hence > C = O and –OH are present. Key. (2)
Sol. Linkage isomerism is shown by ambidient
57. The bond dissociation energy of B – F in BF3 is ligand like NCS and SCN
646 kJ mol–1 whereas that of C – F in CF4 is 515 ∴ [Pd(P Ph3) (NCS2)] and [Pd(PPh3)2 (SCN)2]
kJ mol–1. The correct reason for higher B-F
bond dissociation energy as compared to that of 60. Buna-N synthetic rubber is a copolymer of:
C – F is: Cl
(1) smaller size of B – atom as compared to |
that of C – atom (1) H 2 C = CH − C = CH 2 and
(2) stronger σ bond between B and F in BF3 as H2C = CH – CH = CH2
compared to that between C and F in CF4 (2) H2C = CH – CH = CH2 and
(3) significant pπ - pπ interaction between B H5C6 – CH = CH2
and F in BF3 whreas there is no possibility (3) H2C = CH – CN and
of such interaction between C and F in CF4 H2C = CH – CH = CH2
(4) lower degree of pπ - pπ interaction between (4) H2C = CH – CN
B and F in BF3 than that between C and F in CF4 and H 2 C = CH − C = CH 2
Key. (3) |
CH
Sol. 3
Key. (3)
F
Sol. n CH2 = CH – CH = CH + HCH = CH – CN
B F polymerisation
F  peroxide

CH2 CH CH CH 2 CH2 CH
CN
B has vacant available p orbital and hence it
involves pπ - pπ back bonding which is not Buna - N Rubber
possible in CF4 as C does not have vacant
orbital.
58. In Cannizzaro reaction given below

11
AIEEE-PAPER 2009

MATHEMATICS If cos(β – γ) + cos(γ – α) + cos(α – β) = – 3/2,


61. Let a, b, c be such that b(a + c) ≠ 0. If then
a a + 1 a −1 a +1 b +1 c −1 (1) A is true and B is false
(2) A is false and B is true
−b b + 1 b − 1 + a − 1 b −1 c + 1 = 0,
n+2 n +1
(3) both A and B are true
c c − 1 c + 1 (−1) a (−1) b (−1)n c (4) both A and B are false
then the value of n is Key (3)
(1) zero (2) any even integer Sol.: cos(β–γ) + cos(γ – α) + cos(α – β) = –3/2
(3) any odd integer (4) any integer ⇒ 2cos (β – γ) + 2cos(γ– α) + 2cos(α – β) = –3
Key (3) ⇒ Σ(cosβcosγ + 2Σsin α sinβ + 3 = 0
a −b c ⇒ (cosα+cosβ + cosγ)2 + (sinα + sinβ +sinγ)2=0
Sol.: a + 1 b + 1 c − 1 ⇒ cosα + cosβ + cosγ = 0
a + 1 b −1 c + 1 sinα + sinα + sinγ = 0
(−1)n + 2 a (−1)n +1 b (−1)n c
65. The lines p(p2 + 1) x – y + q = 0 and
+ a +1 b +1 c −1 (p2 + 1)2 x + (p2 + 1) y + 2q = 0 are
a −1 b −1 c +1 perpendicular to a common line for
n n n
a(1 + (−1) ) (− b)(1 + (−1) ) c(1 + (−1) ) (1) no value of p
(2) exactly one value of p
= a +1 b +1 c −1 =0
(3) exactly two values of p
a −1 b −1 c +1 (4) more than two values of p
62. If the mean deviation of the numbers 1, 1 + d, 1 Key (2)
+ 2d, ... , 1 + 100d from their mean is 255, then −(p 2 + 1) 2
the d is equal to Sol.: p(p2 + 1) = 2
p +1
(1) 10.0 (2) 20.0 y=q
(3) 10.1 (4) 20.2 x + y + 2q = 0
Key (3)
⇒ p = –1.
|x−x|
Sol.: = 255
n 66. If A, B and C are three sets such that A ∩ B = A
1 + 1 + d + 1 + 2d... + 1 + 100d
x= ∩ C and A ∪ B = A ∪ C, then
101 (1) A = B (2) A = C
 100 × 101  (3) B = C (4) A ∩ B = φ
101 + d  
=  2  Key (3)
101 Sol.: A ∪ B = A ∪ C
= 1+
50 × 101d
= 1 + 50 d ⇒ n (A ∪ B) = n(A ∪ C)
101 ⇒ n(A) + n(B) – n(A ∩ B)
|x – x | = 255 × 101 = n(A) + n(C) – n(A ∩C)
 50 × 51  n(B) = n(C)
2 d  = 255 × 101
 2  r r r
255 ×101 67.
If u, v, w are non–coplanar vectors and p, q are
d= = 10.1
real numbers, then the equality
50 × 51
r r r r r r r r r
2
63. If the roots of the equation bx + cx + a = 0 be [3u, pv , pw ] − [ pv , w , qu ] − [ 2w, qv , qu ] = 0 holds
imaginary, then for all real values of x, the for
expression 3b2x2 + 6bcx + 2c2 is (1) exactly one value of (p, q)
(1) greater than 4ab (2) less than 4ab (2) exactly two values of (p, q)
(3) greater than –4ab (4) less than –4ab (3) more than two but not all values of (p, q)
Key (3) (4) all values of (p, q)
Sol.: As, bx2 + cx + a = 0 has imaginary roots Key (1)
rr r rr r rr r
So, c2 < 4ab Sol.: 3p2 [ u v w ] − pq [u v w ] + 2q 2 [ u v w ] = 0
2 2 2
Now, 3b x + 6bcx + 2c ⇒ 3p2 – pq + 2q2 = 0
= 3(bx + c)2 – c2 ≥ – c2 ≥ – 4ab
q ± 1 − 24 q
64. Let A and B denote the statements p=
2×3
A: cos α + cosβ + cosγ = 0
B : sinα + sinβ + sinγ = 0 q ± 23 i q
p= ⇒ p = 0, q = 0
2× 3

12
AIEEE-2009-CODE-A

x − 2 y −1 z + 2 1 1
68. Let the line = = lie in the plane x (1) (2)
3 −5 2 log10 4 − log10 3 log10 4 + log103
+ 3y – αz + β = 0. Then (α, β) equals 9 4
(1) (6, – 17) (2) (–6, 7) (3) (4)
log10 4 − log10 3 log10 4 − log10 3
(3) (5, –15) (4) (–5, 5)
Key: (1)
Key (2)
9
Sol.: 2 + 3 × 1 – α (–2) + β = 0 Sol.: P(x ≥ 1) ≥
10
2α + β = –5 ... (i)
9
3 – 15 – 2α = 0 ⇒ 1 − P ( x = 0) ≤
2α = –12 10
n
B = –5 + 12 = 7 1  
3
⇒ ≥ 
(α, β) ≡ (–6, 7) 10  4 
69. From 6 different novels and 3 different  3
n
1
dictionaries, 4 novels and 1 dictionary are to be ⇒   ≤
 4  10
selected and arranged in a row on a shelf so that
the dictionary is always in the middle. Then the ⇒ n log10 3 4
− log10  ≤ −1
number of such arrangements is 1
⇒ n≥
(1) less than 500 log104 − log103

(2) at least 500 but less than 750 73. If P and Q are the points of intersection of the
(3) at least 750 but less than 1000 circles x2 + y2 + 3x + 7y + 2p – 5 = 0 and x2 + y2
(4) at least 1000 + 2x + 2y – p2 = 0, then there is a circle passing
Key (4) through P, Q and (1, 1) for
Sol.: N1N2N3 – N6, D1D2D3 (1) all values of p
The number of ways = 6c4 × 3c1 × 24 (2) all except one value of p
= 15 × 3 × 24 = 1080 (3) all except two values of p
π
70. ∫ [cot x]dx, where [.] denotes the greatest integer (4) exactly one value of p
0 Key: (2)
function, is equal to Sol.: Radical axis is x + 5y + p2 + 2p – 5 =0
(1) π/2 (2) 1 Equation of circle is
(3) –1 (4) – π/2 x2 + y2 + 3x + 7y + 2p – 5 + λ [x + 5y + p2 + 2p
Key: (4) –5]=0 …. (i)
π (i) passes through (1, 1)
Sol.: ∫ [cot x]dx − ( 2p + 7 )
0 ⇒ λ= 2
(p ≠ −1 )
π/ 2 ( p + 1)
∫ {[cot x ] + [ − cot x ]} dx
0
π/ 2
74. The projections of a vector on the three
π
= ∫
0
(−1) dx = −
2
coordinate axis are 6, –3, 2 respectively. The
direction cosines of the vector are
71. For real x, let f(x) = x3 + 5x + 1, then 6 −3 2
(1) f is one–one but not onto R (1) 6, –3, 2 (2) , ,
5 5 5
(2) f is onto R but not one–one 6 −3 2 −6 −3 2
(3) f is one–one and onto R (3) , , (4) , ,
7 7 7 7 7 7
(4) f is neither one–one nor onto R
Key : (3)
Key: (3)
6 −3 2
Sol.: f(x) = x3 + 5x + 1 Sol.: The DCS are , , .
7 7 7
f ′ ( x ) = 3x 2 + 5 > 0 ⇒ f is one–one
4
Q f is cubic ⇒ f is onto 75. If Z − = 2 , then the maximum value of |Z| is
z
‘f’ is one–one and onto.
equal to
 1 (1) 3 +1 (2) 5 +1
72. In a binomial distribution B  n, p =  , if the (3) 2(4) 2 + 2
 4
probability of at least one success is greater than Key: (2)
9 4
or equal to , then n is greater than Sol.: Z − = 2
10 z

13
AIEEE-PAPER 2009

4 4 4 (3) 4x2 + 48y2 = 48 (4) 4x2 + 64y2 = 48


Now, z = Z − + ≤ 2+
z z |z| Key (2)
2 Sol.: Clearly second ellipse is passing through (4, 0)
z −2 z −4 z
⇒ ≤0 so semi major axis of the ellipse is ‘4’. If length
z of semi–minor axis is b then
⇒ 0 < z ≤ 1+ 5 . D
76. Three distinct points A, B and C are given in the (–2, 1)
(2, 1)
2–dimensional coordinate plane such that the B
ratio of the distance of any one of them from the (4,0)
point (1, 0) to the distance from the point (–1, 0) C′ A′ A (2,0) C
1
is equal to . Then the circumcentre of the B′
3 (–2, –1) (2, –1)
triangle ABC is at the point
D′
(2)  , 0 
5
(1) (0, 0)
4  x2 y2
+ =1
5  5  16 b 2
(3)  , 0  (4)  , 0 
2  3  It passes through (2, 1)
Key : (2) 4 1
So + =1
Sol.: Let the point A is (h, k) 16 b 2
A(h,k) 1 3
=
b2 4
4
b2 =
3
P Q
(–1,0) (0, 0) (1,0) ⇒ x2 + 12y2 = 16

AP 1
= 79. The sum to infinity of the series
AQ 3
3AP = AQ 2 6 10 14
1 + + 2 + 3 4 + ... is
⇒ 9AP2 = AQ2 3 3 3 3
⇒ 9[(h – 1)2 + k2] = (h – 1)2 + k2 (1) 2(2) 3
5
(3) 4(4) 6
⇒ h 2 + k2 − h −1 = 0 Key : (2)
2
Locus of A(h, k) is 2 6 10 14
Sol.: Let S = 1 + ++ + + ....∞
5 3 32 33 34
x 2 + y2 − x − 1 = 0 S 1 2 6 10
2 = + + + + ....∞
5  3 3 32 33 34
∴ Circumcentre of ∆ ABC is  , 0  ______________________________
4 
2S 1 4 4 4
= 1 + + 2 + 3 + 4 + .....∞
77. The remainder left out when 8 – (62) is 2n 2n+1 3 3 3 3 3
divided by 9 is 4
4 2
(1) 0 (2) 2 = + 3
(3) 7 (4) 8 3 1
1−
Key: (2) 3
Sol.: 82n – (62)2n + 1 4 2
= + =2
⇒ (9 – 1)2n – (63 – 1)2n + 1 3 3
⇒ (2nC0 92n – 2nC1 92n – 1 + ….. + 2nC2n) 2S
=2 ⇒ S=3
– (2n + 1C0 632n + 1 – 2n + 1C1 632n + …. 3
– 2n +1C2n + 1 80. The differential equation which represents the
Clearly remainder is ‘2’. family of curves y = c1 ec x , where c1 and c2 are 2

78. The ellipse x2 + 4y2 = 4 is inscribed in a arbitrary constants, is


rectangle aligned with the coordinate axes, (1) y′ = y2 (2) y″ = y′ y
which in turn is inscribed in another ellipse that (3) yy″ = y′ (4) yy″ = (y′)2
passes through the point (4, 0). Then the Key: (4)
equation of the ellipse is Sol.: y = c1ec x …..(i) 2

(1) x2 + 16y2 = 16 (2) x2 + 12y2 = 16


14
AIEEE-2009-CODE-A

y ' = c1c 2 e c2 x 3
y′ = c2 y ….. (from (i)] …..(ii)
y′′ = c2 y′ …..(iii) 2
y ' y ''
from (ii) & (iii) = ⇒ yy '' = (y ')2
y y' O 1
5
81. One ticket is selected at random from 50 tickets
numbered 00, 01, 02, ... , 49. Then the
probability that the sum of the digits on the ≡ x – 2y + 4 = 0
selected ticket is 8, given that the product of Required area
3
these digits is zero, equals
= ∫ (y − 2)2 + 1 − 2y + 4  dy
(1) 1/14 (2) 1/7 0
(3) 5/14 (4) 1/50 3

Key: (1) = ∫ (y − 2)2 − 2y + 5 dy


Sol.: A = Events that sum of the digits on selected 0

ticket is 8 = 9 sq. units


= {08, 17, 26, 35, 44}
n(A) = 5 Given P(x) = x4 + ax3 + cx + d such that x = 0 is
84.
Event that product of digits is zero the only real root of P′ (x) = 0. If P(–1) < P(1),
= {00, 01, 02, 03, 04, 05, 06, 07, 08, 09, 10, 20,then in the interval [–1, 1].
30, 40} (1) P(–1) is the minimum and P(1) is the
⇒ n(B) = 14 maximum of P
A 5
(2) P(–1) is not minimum but P(1) is the
P  = maximum of P
 B  14
(3) P(–1) is the minimum but P(1) is not the
maximum of P
82. Let y be an implicit function of x defined by (3) neither P(–1) is the minimum nor P(1) is
x2x – 2xx coty – 1 = 0. Then y′ (1) equals the maximum of P
(1) –1 (2) 1 (4) niether P(–1) is the minimum nor P(1) is
(3) log 2 (4) – log2 the maximum of P
Key : (1) Key: (2)
π Sol.: P(x) = x4 + ax3 + bx2 + cx + d
Sol.: When x = 1, y =
x 2
2
2
P′(x) = 4x3 + 3ax2 + 2bx + c
(x – cot y) = cosec y As P′(x) = 0 has only root x = 0
xx = cot y + |cosec y| ⇒c=0
π
when x = 1, y = P′(x) = x(4x2 + 3ax + 2b)
2 ⇒ 4x3 + 3ax + 2b = 0 has non real root.
⇒ xx = cot y + cosec y and 4x2 + 3ax + 2b > 0 ∀ x ∈ [−1, 1].
diff. w.r.t. to x
dy
xx(1 + lnx) = (– cosec2 y – cosecy cot y)
dx – +
π O
when x = 1 and y =
2
dy –1 1
= −1
dx
83. The area of the region bounded by the parabola As P(−1) < P(1) ⇒ P(1) is the max. of P(x) in [−1, 1]
(y – 2)2 = x – 1, the tangent to the parabola at 85. The shortest distance between the line y – x = 1
the point (2, 3) and the x–axis is and the curve x = y2 is
(1) 3 (2) 6
3 2 2 3
(3) 9 (4) 12 (1) (2)
Key: (3) 8 8
Sol.: Equation of tangent at (2, 3) 3 2 3
(3) (4)
5 4
Key : (1)
dy
Sol.: 1 = 2y
dx

15
AIEEE-PAPER 2009

dy 1 (4) Statement–1 is false, Statement–2 is true


= =1
dx 2y Key : (3)
sin x 2 ,
Sol.: g(f (x)) = sin(f (x)) = 
1 1 x≥0
⇒ y= ⇒x=
− sin x , x < 0
2
2 4
1 1 2x cos x , x ≥ 0
2
− −1
3 3 2 (g(f (x))) ' = 
shortest distance = 2 4 = = −2x cos x , x < 0
2
2 4 2 8
2h cosh 2
R.H.D. of (g(f (0))) ' = lim =2
Directions: Questions number 86 – 90 are h →0+ h
Assertion– Reason type questions. Each of 2h cosh 2
these questions contains two statements; L.H.D. of (g(f (0))) ' = lim+ = −2
h →0 −h
Statement – 1 (Assertion) and Clearly gof is twice differentiable at x = 0 hence
Statement – 2 (Reason) it is differentiable at x = 0 and its derivative is
Each of these questions also have four continuous at x = 0.
alternative choices, only one of which is the
correct answer. You have to select the correct 88. Statement 1: The variance of first n even natural
choice. n 2 −1
86. Let f(x) = (x + 1)2 – 1, x ≥ – 1 numbers is
4
Statement – 1: The set {x : f(x) = f–1 (x)} Statement 2: The sum of first n natural numbers
= {0, –1}.
n(n + 1)
Statement – 2: f is a bijection. is and the sum of squares of first n
(1) Statement–1 is true, Statement–2 is true, 2
n(n + 1) (2n + 1)
Statement–2 is a correct explanation for natural numbers is
statement–1 6
(2) Statement–1 is true, Statement–2 is true; (1) Statement–1 is true, Statement–2 is true,
Statement–2 is not a correct explanation for Statement–2 is a correct explanation for
statement–1. statement–1
(3) Statement–1 is true, statement–2 is false. (2) Statement–1 is true, Statement–2 is true;
(4) Statement–1 is false, Statement–2 is true Statement–2 is not a correct explanation for
Key : (1) statement–1.
Sol.: (x + 1)2 – 1 = x (3) Statement–1 is true, statement–2 is false.
f(x
) (4) Statement–1 is false, Statement–2 is true
x
y= y= Key : (4)
2 + 4 + 6 + ....2n
Sol.: x = = n +1
n
n n

2
∑ (x
i =1
i − x)2 ∑ (2i − (n + 1))
i =1
2

variance (σ ) = =
n n
n n n

(x + 1)2 = x + 1 4∑ i + ∑ (n + 1) − 4(n + 1)∑ i


2 2

⇒ x = 0, −1 = i =1 i =1 i =1
= n2 – 1
n
Since co–domain of function is not given.
So if we assume function 89. Statement 1: ~ (p ↔ ~ q) is equivalent to p ↔ q
(a) as onto then A is correct Statement 2 : ~ (p ↔ ~ q) is a tautology
(b) as not onto then none of the answer is (1) Statement–1 is true, Statement–2 is true,
correct. Statement–2 is a correct explanation for
87. Let f(x) = x|x| and g(x) = sinx statement–1
Statement 1 : gof is differentiable at x = 0 and (2) Statement–1 is true, Statement–2 is true;
its derivative is continuous at that point Statement–2 is not a correct explanation for
Statement 2: gof is twice differentiable at x = 0 statement–1.
(1) Statement–1 is true, Statement–2 is true, (3) Statement–1 is true, statement–2 is false.
Statement–2 is a correct explanation for (4) Statement–1 is false, Statement–2 is
statement–1 true
(2) Statement–1 is true, Statement–2 is true; Key: (3)
Statement–2 is not a correct explanation for
statement–1.
(3) Statement–1 is true, statement–2 is false.
16
AIEEE-2009-CODE-A

Sol.: Statement–2 is a correct explanation for


p q ~q (p ↔ ~ (p ↔ p↔ statement–1
~q) ~q) q (2) Statement–1 is true, Statement–2 is true;
T T F F T T Statement–2 is not a correct explanation for
T F T T F F statement–1.
F T F T F F (3) Statement–1 is true, statement–2 is false.
F F T F T T (4) Statement–1 is false, Statement–2 is true
Clearly, ~ (p ↔ ~q) is not a tautology because it Key: (1)
does not contain T in the column of its truth Sol.: adj(adjA) = |A|n – 2A, where |A| = determinant of
A but n = 2
table. Also, ~(p ↔ ~ q) & p ↔ q have the same
truth value. ⇒A
90. Let A be a 2 × 2 matrix also |adj A| = |A|n – 1 ⇒ |A|
Statement 1 : adj (adj A) = A Statement–1 is true and Statement–2 is also true
Statement 2 : |adj A| = |A| and Statement–2 is correct explanation of
(1) Statement–1 is true, Statement–2 is true, Statement–1.



AIEEE 2009 (KEY)


PHYSICS KEY CHEMISTRY KEY MATHS KEY
1. (3) 31. (3) 61. (3)
2. (1) 32. (4) 62. (3)
3. (3) 33. (3) 63. (3)
4. (1) 34. (3) 64. (3)
5. (2) 35. (3) 65. (2)
6. (1) 36. (3) 66. (3)
7. (4) 37. (4) 67. (1)
8. (3) 38. (4) 68. (2)
9. (4) 39. (3) 69. (4)
10. (2) 40. (4) 70. (4)
11. (4) 41. (3) 71. (3)
12. (2) 42. (3) 72. (1)
13. (2) 43. (3) 73. (2)
14. (3) 44. (2) 74. (3)
15. (4) 45. (2) 75. (2)
16. (2) 46. (4) 76. (2)
17. (2) 47. (2) 77. (2)
18. (2) 48. (1) 78. (2)
19. (3) 49. (1) 79. (2)
20. (1) 50. (2) 80. (4)
21. (2) 51. (2) 81. (1)
22. (4) 52. (2) 82. (1)
23. (3) 53. (3) 83. (3)
24. (1) 54. (2) 84. (2)
25. (4) 55. (2) 85. (1)
26. (1) 56. (3) 86. (1)
27. (4) 57. (3) 87. (3)
28. (3) 58. (2) 88. (4)
29. (1) 59. (2) 89. (3)
30. (2) 60. (3) 90. (1)

17

Das könnte Ihnen auch gefallen