Beruflich Dokumente
Kultur Dokumente
Capable of quick,
custom service,
for all your
manufacturing
needs
How it Works:
The basic system would be a keypad alarm with monitoring and data logging. This system would be comprised of an
electronic keypad, enclosure door sensors, Stat Trak™ system, (note: the Stat Trak™ unit requires any standard Cable
Modem to operate), a siren and/or buzzer and a power supply. The keypad would have an access door to shield it from
harsh environmental conditions and to minimize being obvious of its presence.
Normal Operation:
The system would work by responding to the opening of the keypad door. At that point a timer would start and a buzzer
would sound until the correct access code is entered into the keypad. Upon entering the correct code into the keypad,
the buzzer would stop and the Stat Trak™ system would send a message that the alarm has been deactivated by code
number “xyz” along with a time stamp and location ID. After authorized access the system would automatically re-arm
five minutes after the doors are closed or immediately after the correct access code is entered into the keypad.
Powering Needs:
1) An active 2-way RF drop
2) An authorized Cable Modem
3) An active AC power outlet, rated for fifteen amps at one hundred and twenty volts
For more details about Stat Trak™ IP accessible Lock Systems please email engsupport@multilink1.com
BOX STYLE HINGE BOX SIZE NUMBER TYPE KNOCKOUTS BOX COLOR OPTIONS SIZE MATERIAL
OF LOCKS OF LOCK
S - STANDARD KNOCK-OUTS
WIDTH x HEIGHT x DEPTH C - CUSTOM KNOCK-OUTS
DIMENSIONS OF BOX ( IF CUSTOM SPECIFY ON
OPTION PAGE )
MDU ENCLOSURES / INSTALLATION
Trapezoid Knockouts
• SR075
• SR100
• SR200
SECTION 1
R4000 ROUND 4.000 OTHER
INDIVIDUAL BOX
*PLEASE SEE ATTACHED PAGE FOR THE LOCATIONS
BULK AND TYPE OF KNOCKOUTS FOR THIS BOX
NOTES
TOP
BACK
BOTTOM
STOPS ILLEGALS
In the unlikely case that the cover
is ever forced off, there still remains
a second line of defense. An illegal
hook-up is prevented because all un-
connected drops are still hidden and
protected in the lower inner box!
SECTION 1
A
Features & Benefits
• Now available in depths of 10” and 15”
• Available in Aluminum or Steel
• Available with Star Slam Lock
Item Part# Description Dimensions UOM
A - RTP-4216 Standard Tom Ped 42”H x 16”W x 8”D Each
B - RTP-1548 Standard Tom Ped 40”H x 15”W x 8”D Each
C - RTP-1834 Standard Tom Ped 36”H x 12”W x 8”D Each
D - RTP-8032 Standard Tom Ped 32”H x 8”W x 8”D Each
- 12824 BS-24 Pedestal Stake For Tom Ped Double Box Pedestal 24” Each
- 12832 BS-32 Pedestal Stake For Tom Ped Double Box Pedestal 32” Each
- 12845 BS-42 Pedestal Stake For Tom Ped Double Box Pedestal 42” Each
- 12833 RN-TPTB Tom Ped Tap Bracket - Each
Stock codes vary depending on options such as locks and other accessories
Please call Customer Service for custom sizes, configurations, and lock specifications
RTP-15408 RTP-1548
MDU ENCLOSURES / INSTALLATION
Hinged door series includes 3 heavy duty slip hinges for maintenance ease. Box-in-Box style RTP with cut away
Above box features a tamper-proof screw slam lock. sides and adjustable star and D-Mark
plate. Features tamper-proof screw
SECTION 1
slam lock.
Van Lock
This particular box features a Van Lock
Plug Lock with customized placement.
RTP-36115
“Box-in-Box” style pedestal with full sides. Box includes D-Mark plate with two
mounting options. Also available with star plate and various locking options.
Please call Customer Service for more information.
Applications
The heavy duty box-in-box design combined with
the unique hardened steel security bar closure as-
sembly makes the M1™ as tough as a tank!
Stock codes vary depending on options such as locks and other accessories
Please call Customer Service for custom sizes, configurations, and lock specifications
Super Hinge
Lock Pin That
Automatically
Engages When
Box Is Closed
Rear
Multistage
Knockouts
SECTION 1
Features & Benefits
• High security bearing sleeve at locking point
• Gray baked on powder coating; UL standards outdoor
box rating, high corrosion resistance
• Full back with multiple entry knockout
• Key style mounting holes for easy installation
• Drain holes to keep moisture out
• Available with Star Slam Lock
• MX and DX locking keyways available
• Available in steel or aluminum
• If aluminum is desired, add an A to the end of the part number
RNBB Closed Shown with Super Heavy Duty Shown with Standard Hinge Option
Hinge Option
All boxes listed below come with standard “A” size Star Slam Lock Option shown again here
SECTION 1
Stock codes vary depending on options such as locks and other accessories
Please call Customer Service for custom sizes, configurations, and lock specifications
All boxes listed below come with standard “A” size knockouts: 2 Bottom / 2 Back / 2 Top
RNBB-PLT-12128
SECTION 1
• Indented mounting holes for easy installation
• 3/4” D-Knockout
• Drain holes to keep moisture out Uses same replaceable hasp
• Available with Star Slam Lock system as RNB series boxes
Standard Knockouts
Box Style Knockouts Sizes
RNH-10126 2 Bottom 1 Size A / 1 Size C
RNH-12188 2 Bottom 1 Size A / 1 Size C
RNH-12186 3 Bottom 2 Size A / 1 Size C
RNH-20246 3 Bottom 2 Size A / 1 Size C
RNH-20248 3 Bottom 2 Size A / 1 Size C
RNH-24368 3 Bottom 2 Size A / 1 Size C
RNH-36368 3 Bottom 2 Size A / 1 Size C
Stock codes vary depending on options such as locks and other accessories
Please call Customer Service for custom sizes, configurations, and lock specifications
Multilink is the only manufacturer of steel enclosures for the Cable TV industry that
offers built-in drain holes standard throughout the entire product line
SECTION 1
Varies W/ Options RNHL-664 Hanging Lid Series Enclosure 6” W x 6” H x 4” D Each
Varies W/ Options RNHL-684 Hanging Lid Series Enclosure 6” W x 8” H x 4” D Each
Varies W/ Options RNHL-884 Hanging Lid Series Enclosure 8” W x 8” H x 4” D Each
Varies W/ Options RNHL-10104 Hanging Lid Series Enclosure 10” W x 10” H x 4” D Each
Varies W/ Options RNHL-10124 Hanging Lid Series Enclosure 10” W x 12” H x 4” D Each
Varies W/ Options RNHL-12124 Hanging Lid Series Enclosure 12” W x 12” H x 4” D Each
Varies W/ Options RNHL-666 Hanging Lid Series Enclosure 6” W x 6” H x 6” D Each
Varies W/ Options RNHL-886 Hanging Lid Series Enclosure 8” W x 8” H x 6” D Each
Varies W/ Options RNHL-8126 Hanging Lid Series Enclosure 8” W x 12” H x 6” D Each
Varies W/ Options RNHL-10106 Hanging Lid Series Enclosure 10” W x 10” H x 6” D Each
Varies W/ Options RNHL-12126 Hanging Lid Series Enclosure 12” W x 12” H x 6” D Each
Varies W/ Options RNHL-12166 Hanging Lid Series Enclosure 12” W x 16” H x 6” D Each
Varies W/ Options RNHL-12186 Hanging Lid Series Enclosure 12” W x 18” H x 6” D Each
Varies W/ Options RNHL-12128 Hanging Lid Series Enclosure 12” W x 12” H x 8” D Each
Varies W/ Options RNHL-12168 Hanging Lid Series Enclosure 12” W x 16” H x 8” D Each
Varies W/ Options RNHL-12188 Hanging Lid Series Enclosure 12” W x 18” H x 8” D Each
Multilink is the only manufacturer of steel enclosures for the Cable TV industry that offers built-in drain holes standard
throughout the entire product line.
Stock codes vary depending on options such as locks and other accessories.
Please call Customer Service for custom sizes, configurations, and lock specifications.
Van Lock Plug Lock Master Pad Lock Let’s Talk Security
Self-locking CPLM1 is available Multilink is a full line distributor of New optional logo/six-digit code.
in Cable Plug Lock-Master Series the most trusted locks in the world, Now you can track and know
and CPLV Cable Plug Lock- the Master Padlock with (2) keys. where your keys and drivers are!
Vanamatic (8 in 1).
MDU ENCLOSURES / INSTALLATION
A B
Figure Part# Description UOM
A 12333Z RNED-101 Eccentric Driver Each
SECTION 1
MultiScrew Installed on self locking pedestals, lock boxes, and Tom Peds can be interchanged with some Multilink
security products
C
Figure Part# Description UOM
C 12814 RNE-501 Tamper Proof Screw Each
D 10-5275 RNE-100 Eccentric Thread Pitch Each
Optional louvres available on your Keep from losing the detachable lids New Tap Mounting Bracket Mount
MDU, please call Customer Service from your Roughneck Steel Enclo- taps quickly and easily inside your
for more information sure with this high strength retain- roughneck box
ing cable with eyelets
SECTION 1
12712 Roughneck Lid Retaining Cable With 2 Hooks Each
12708K RNBT-7 Tap Bracket Each
Why does Multilink use Galvanealed Steel vs. Aluminized Steel in the construction of our Steel MDU Enlcosures?
Gavanealed Steel - Starzinc-Alloy Aluminized Steel - Al-Might
Features Uses Features Uses
• Uniform zinc coated • Automobile • Aluminum coated steel • Automobile
steel sheets feature paint Underbody parts, sheets offer high-grade Exhaust pipes, mufflers,
adhesion quality not reinforcing parts resistance to corrosion catalytic converters, auto
found in other coated • Outdoor and heat heat shields
steel sheets Roofing, siding, shutters, • Excellent heat reflective • Indoor
• Surface roughness doors, and traffic signs and good formability Chimneys, fireplaces,
encourages paint • Indoor • Beautiful finish even stoves, heat exchangers,
adhesion and provides Air conditioner housings, under high temperature water heaters, furnaces,
base for finishing commercial refrigerators, barbecue grills, ovens,
washing machines, steel and toasters
furniture, office machines,
furnaces, and ovens
Galvanealed Steel
Starzinc-Alloy
Aluminized Steel
Al-Might
A-I J
• Standard/Stock Colors: Yellow and Orange. Custom Colors: Blue, Green, Gray, White, Brown, and Red
• Please specify color when placing your order
• Other custom colors available upon request
• 500 Minimum Order with both RT & SL part numbers
• 5,000 Minimum Order for custom colors
• Please contact customer service for custom orders and more information
• Please note: $75.00 one time set-up fee for special logo
CABLE MARKERS
SECTION 2
Rolling Digital
Converter Tote
Techbag Tote
• Easy to maintain
• Washable
SECTION 3
A B C
SECTION 3
• Each bag has a built-in plastic tie strip to seal the bag dirt, grease, etc. on the floors and carpet of subscribers
and is made from a durable 2 mil. clear poly film • No more angry phone calls from subscribers upset with
• Custom imprinting and/or logos are available dirt on their floors and carpets!
Please call Customer Service for details • No more carpet cleaning bills from the dirty floors of
• Reduces the roach and pest problems along with the subscribers
handling of the converters in the field and office area • Improve image of the cable system as being
• Converter disconnections, upgrades, and repair professional, “One who cares about work and customers!”
problems are handled quickly and easily with write-on • Improve the productivity of the installer because he/she
disposable bags doesn’t have to spend time taking his/her boots/shoes
• Operations run more efficiently off and on before entering the home
• Reduces scratches
• Keeps converter dust free while sitting on the shelf
Figure Part# Description Dimensions UOM
A 10-8141 CB-2026 Converter Bag 20” x 26” 500/Box
B 37911 SCJM-402-XD Work Boot & Regular Shoe Style - 50 Pair/Box
C 37922 SCJM-402-DW High Top Boot Style - 50 Pair/Bag
A B C
D E F
The Multilink Tap Port Cleaner and Thread Chaser Tool is four tools in one! One side of the tool cleans off the tap threads
SECTION 4
just like a battery terminal cleaner. The second wire brush cleans the facing of the port, where the signal makes contact
with the F-Connector. The other end of the tool re-taps the threads on the Tap Port Cleaner and doubles as an F-
Connector Push-On Tool. Each of these features ensure better connectorization and signal contact with the F-Connector.
A B C D
Improper connection of the F-Connector is the number one cause of CLI signal leakage! Using a Multilink Torque Wrench
can ensure proper connectorization, signal connectorization, and signal contact with the F-Connector at a minimum
cost. State size, poundage, and quantity when ordering.
MAINTENANCE TOOLS
A 38031K 5530-TW, Torque Wrench 30 Inch/Pounds .4375” (11.112mm) Each
SECTION 4
A 38040K 5540-TW, Torque Wrench 40 Inch/Pounds .4375” (11.112mm) Each
A 38024K 5520-TW, Torque Wrench 20 Inch/Pounds .5” (12.7mm) Each
A 38029K 5525-TW, Torque Wrench 25 Inch/Pounds .5” (12.7mm) Each
A 38034K 5530-TW, Torque Wrench 30 Inch/Pounds .5” (12.7mm) Each
A 38044K 5540-TW, Torque Wrench 40 Inch/Pounds .5” (12.7mm) Each
A 38023K 5520-TW, Torque Wrench 20 Inch/Pounds .5625” (14.287mm) Each
A 38036K 5525-TW, Torque Wrench 25 Inch/Pounds .5625” (14.287mm) Each
A 38037K 5530-TW, Torque Wrench 30 Inch/Pounds .5625” (14.287mm) Each
A 38038K 5540-TW, Torque Wrench 40 Inch/Pounds .5625” (14.287mm) Each
A 38039K 5520-TW, Torque Wrench 20 Inch/Pounds .625” (15.875mm) Each
A 38049K 5525-TW, Torque Wrench 25 Inch/Pounds .625” (15.875mm) Each
A 38032K 5530-TW, Torque Wrench 30 Inch/Pounds .625” (15.875mm) Each
A 38046K 5540-TW, Torque Wrench 40 Inch/Pounds .625” (15.875mm) Each
B 38219K 5520-TW, Adj Torque Wrench 20 Inch/Pounds .875” (0-22.225mm) Each
B 38018K 5525-TW, Adj Torque Wrench 25 Inch/Pounds .875” (0-22.225mm) Each
B 38017K 5530-TW, Adj Torque Wrench 30 Inch/Pounds .875” (0-22.225mm) Each
B 38016K 5540-TW, Adj Torque Wrench 40 Inch/Pounds .875” (0-22.225mm) Each
C 38051K 5520-SSTW, Torque Wrench 20 Inch/Pounds - Each
C 38030K 5525-SSTW, Torque Wrench 25 Inch/Pounds - Each
C 38050K 5530-SSTW, Torque Wrench 30 Inch/Pounds - Each
C 38042K 5540-SSTW, Torque Wrench 40 Inch/Pounds - Each
D 38946 5510-TWP, “Get Torqued” Torque Wrench 10.5 Inch/Pounds - Each
A B
Cable Splicer’s Knife Fiber Optic Cleaver
Features & Benefits Features & Benefits
• Tough, coping-style blade • The revolutionary new cleaving tool from the leader in
• Forged steel Fiber Optic Tools!
• Full-size, high dielectric, red cushioned handle • Small, compact size for field service work
• After cleaving, fiber is held for safe disposal
• Accommodates glass fibers with 125 µm nominal
cladding diameters in cable or coated form
CLEAVE ANGLE
<1/2 degrees 50% of all cleaves
<1 degree 75% of all cleaves
MAINTENANCE TOOLS
SECTION 4
A B
Fiber Optic Strippers Fiber Optic Jacket Stripper
Features & Benefits Features & Benefits
• Mechanically strip buffer coating • For stripping 125 micron fiber with 250 micron buffer
• Accurate to 5m (0.0002”) coating
• No adjustments necessary • 0.78” (1.98mm) diameter stripping hole at tip of tool can
• Color-coded handles for quick identifications be used to strip the fiber jacket
• All fiber optic strippers are 5-1/4” (13.3cm) overall length • 0.0055 (0.014mm) diameter hole and V-opening in blade
and individually boxed allows removal of 250 micron buffer coating from 125
micron fiber
• Pre-set at the factory. No adjustments needed!
• Will not scratch or knick glass fiber
• All cutting surfaces are manufactured to precise
tolerances to assure clean, smooth strips
MAINTENANCE TOOLS
• Comfort-grip, ergonomic handles
SECTION 4
C • Lock to hold tool closed when not in use
• Made in the USA
Fiber Optic Jacket Strippers
Features & Benefits
• Removes outside jacket from various sizes of fiber
optic cable
• Always leaves a clean strip
• Color-coded cushion grip handles
Figure Part# Description Dimensions Weight UOM
A 990000000FOS127 FOS127 127 µm/ 0.005” Min. Cutting Diameter 5.25” (13.3cm) 0.25 Lbs Each
Silver Handle Cover
A 990000000FOS152 FOS152 152 µm/ 0.006” Min. Cutting Diameter 5.25” (13.3cm) 0.25 Lbs Each
Gold Handle Cover
A 990000000FOS175 FOS175 175 µm/ 0.007” Min. Cutting Diameter 5.25” (13.3cm) 0.25 Lbs Each
Mustard Handle Cover
A 73302 FOS203 203 µm/ 0.008” Min. Cutting Diameter 5.25” (13.3cm) 0.25 Lbs Each
Red Handle Cover
A 99000000FOS254 FOS254 254 µm/ 0.010” Min. Cutting Diameter 5.25” (13.3cm) 0.25 Lbs Each
Light Blue Handle Cover
A 9900000FOS305 FOS305 305 µm/ 0.012” Min. Cutting Diameter 5.25” (13.3cm) 0.25 Lbs Each
White Handle Cover
B 9900000000FOJS1 FOJS-1 0.75mm (0.030”) Dia. & 1.00mm (0.40”) Dia. Cables 5” (12.7cm) 0.75 Lbs Each
Pink Handle Cover
B 9900000000FOJS2 FOJS-2 1.25mm (0.050”) Dia. & 1.50mm (0.060”) Dia. Cables 5” (12.7cm) 0.75 Lbs Each
Maroon Handle Cover
C 73306 FOS-1 (CFS-2) Fiber Optic Jacket Stripper 6.5” (16.5cm) 0.25 Lbs Each
A B
C D
MAINTENANCE TOOLS
SECTION 4
E F
Features C
• NEMA/EEMAC Type 4, 4X, 12 specifications
• UL 508 listed, Type 1, 2, 3, 3R, 4, 4X, 12, 13
• CSA certified LR 89590 for use with industrial Options
equipment CSA Enc. 1, 2, 3, 4, 4X, 12, 13 • Optional painted carbon steel back panels
SECTION 5
a continuous channel
• 304 stainless steel wall mounting feet with 10-32 • EMI/RFI shielding
stainless steel screws included • Factory supplied silk screening
• 10-32 thread inserts are installed for optional back panel
• Fiberglass material is easily punched, drilled or sawed
• UV stabilized for outdoor use
Part# Description Dimensions UOM
10-9001 AM 664 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 6.1” A x 6.1” B x 4.18” C Each
10-9002 AM 864 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 8” A x 6.12” B x 4.13” C Each
10-9003 AM 1084 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 10.13” A x 8.26” B x 6.13” C Each
10-9004 AM 1086 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 10.13” A x 8.26” B x 6.13” C Each
10-9005 AM 1206 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 12.13” A x 10.26” B x 6.13” C Each
10-9006 AM 1426 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 14.13” A x 12.26” B x 6.13” C Each
10-9007 AM 1648 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 16.27” A x 14.4” B x 8.13” C Each
10-9008 AM 1868 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 18.4” A x 16.4” B x 8.13” C Each
10-9009 AM 2068 SERIES JIC Size Junction Boxes With Lift Off Screw Cover 20” A x 16” B x 8.13” C Each
10-9010 AM 664L SERIES JIC Size Junction Boxes With Hinged Cover 6.1” A x 6.1” B x 4.18” C Each
10-9011 AM 864L SERIES JIC Size Junction Boxes With Hinged Cover 8” A x 6.12” B x 4.13” C Each
10-9012 AM 1084L SERIES JIC Size Junction Boxes With Hinged Cover 10.13” A x 8.26” B x 6.13” C Each
10-9013 AM 1086L SERIES JIC Size Junction Boxes With Hinged Cover 10.13” A x 8.26” B x 6.13” C Each
10-9014 AM 1206L SERIES JIC Size Junction Boxes With Hinged Cover 12.13” A x 10.26” B x 6.13” C Each
10-9015 AM 1426L SERIES JIC Size Junction Boxes With Hinged Cover 14.13” A x 12.26” B x 6.13” C Each
10-9016 AM 1648L SERIES JIC Size Junction Boxes With Hinged Cover 16.27” A x 14.4” B x 8.13” C Each
10-9017 AM 1868L SERIES JIC Size Junction Boxes With Hinged Cover 18.4” A x 16.4” B x 8.13” C Each
10-9018 AM 2068L SERIES JIC Size Junction Boxes With Hinged Cover 20” A x 16” B x 8.13” C Each
Features
• Wall or pole mountable
• Integrated security features
PLASTIC DEMARCATION ENCLOSURERS
Benefits
The Multilink ML-200 series telephony demarcation enclosure is a weatherproof outdoor product designed to allow for
the interconnection or repair of traditional telephony grade copper conductors.
The enclosure can be used for interconnecting copper telephony conductors in VOIP applications without the need to
re-run entire telephony inside wiring.
The enclosure can be mounted on most outdoor plant surfaces including poles and walls near existing telephony
demarcation enclosures.
Within the enclosure are 4 brass posts with associated washers and nuts for terminating in-bound and out-bound copper
pairs, which, if used, would allow for a means to separate the network from a station in test access situations.
The enclosure can also be used as a convenient location to repair copper conductors using standard discrete copper
connectors.
The unit is designed with 2 entry ports at the unit’s base for in-bound and out-bound cabling and ground wire insertion.
The cover and base are hinged and can be secured via the molded in cover and base loop located on the right hand side.
Features
• Wall or pole mountable
• Integrated security features
SECTION 5
Benefits
The Multilink ML-210 series telephony demarcation enclosure is a weatherproof outdoor product designed to allow for
the interconnection or repair of traditional telephony grade copper conductors.
The enclosure can be used for interconnecting copper telephony conductors in VOIP applications without the need to
re-run entire telephony inside wiring.
The enclosures can be mounted on most outdoor plant surfaces including poles and walls near existing telephony
demarcation enclosures.
Within the enclosure are 4 3M Scotchlok™ UR2 connectors for 2-or-3 wire solid copper conductor combinations of 19-26
AWG for terminating in-bound and out-bound copper pairs, which, if used, would allow for a means to separate the
network from a station in test-access situations.
The enclosure can also be used as a convenient location to repair copper conductors using standard discrete copper
connectors.
The unit is designed with 2 entry ports at the unit’s base for in-bound and out-bound cabling and ground wire insertion.
The cover and base are hinged and can be secured via the molded in cover and base loop located on the right hand side.
Also available in 4 pair and 6 pair terminating as well as a brass grounding paste with associated washers and nuts.
Locking Terminator
C
PLASTIC DEMARCATION ENCLOSURERS
SECTION 5
Exterior Features
• Weatherized UV stabilized plastic for the ultimate protection
against the elements
• Dual locking system
• UV stabilized plastic can be painted with Latex paint
• Countersunk mounting holes for easy mounting on uneven
surfaces like aluminum or vinyl siding
• Can be wall mounted or on a pedestal stake
• Standard color is Gray
• Custom Logos/Imprints. Injection molded available
Interior Features
• Both plastic dividers can be removed for increased versatility
• The removable plastic insert plate has 2 knockouts for F-81
hex holes and an open end hex hole in the center
of plate for an F-81
B
• Shown with optional back mounting plate for brick mortar
joint align mount
• Available on some model demarcation enclosures
• Can be securely locked with a locking terminator or
PLASTIC DEMARCATION ENCLOSURERS
• Custom Logos/Imprints
• Injection Molded available
• Have it your way, we customize to your application!
Stock ID Description Dimensions Weight Lbs. UOM
30125K CC-1/JR-T Set Up for Locking Terminator Use 7.375”H x 4.75”W x 1.625”D - 50/Case
30166 CC-1/JR-TS Star Tamper Proof Screw 7.375”H x 4.75”W x 1.625”D - 50/Case
30105K CC-1/DWB-T 9.5”H x 6.5”W x 3.75”D - 50/Case
30306K CC-1/DWB-TX “X” Back 9.5”H x 6.5”W x 3.75”D - 30/Case
30307K CC-1/DWB-TS Tamper Proof Screw 9.5”H x 6.5”W x 3.75”D - 30/Case
30155K CC-1/110-T Set Up for Locking Terminator Use 11”H x 7”W x 4.25”D - 30/Case
30413 CC-1/110-TS Star Tamper Proof Insert 11”H x 7”W x 4.25”D - 30/Case
30412K CC-1/100-T Set Up for Locking Terminator Use-Low Profile Cover 11”H x 7”W x 2.5”D - 36/Case
30411 CC-1/100-TS Star Tamper Proof Insert 11”H x 7”W x 2.5”D - 36/Case
31430 C-1/H Hasp for CC-1 Enclosure - - Each
31701 578-RTO Riser Tubing .5”ID x .875”OD x 6’ - 50/Case
31702 578-MS New Slit Back Snap-On Style Riser Tubing-Gray .875 - 50/Case
31708 578-MS1 Mounting Strap for Riser Tubing 1” - 50/Case
31705 578-RT Solid Wall Riser Tubing-Gray .5”ID x .875”OD x 6’ - 50/Case
31709 578-RT1 Solid Wall Riser Tubing-Gray .875”ID x 1”OD x 6’ - 50/Case
31440 C-1PC Terminator Cap for CC-1 Enclosures-Gray - - 50/Case
33200 8480 #8 x 1” Hex Screw - - 1,000/Pack
30661K RNI-5211 Single Dwelling Voice Port Enclosure 20”H x 9.5”W x 4.5”D - 10/Case
30665K RNI-5212 Single Dwelling Voice Port Enclosure 20”H x 9.5”W x 4.5”D - 10/Case
( w/screen and mounting hardware included )
A B
SECTION 5
from weed eaters and
environmental damage with
solid wall riser tubing
Features & Benefits
• Dresses up drops
• Protects passives from elements
• Pre-wiring drops
Stock ID Description Dimensions Weight Lbs. UOM
A 1000-A Plastic Security Enclosure-Gray 4.875” x 2” - Each
B 1100-B Plastic Security Enclosure-Gray 4.875” x 3.5” - Each
C C-1/H Hasp for CC-1 Enclosures - 50/Case
D 578-RTO Slit Back Snap-On Style Riser Tubing .5” ID x .875” OD x 6’ - 50/Case
E 578-MS Mounting Strap for Riser Tubing .875” - 50/Case
F 578-MS 1 Mounting Strap for Riser Tubing 1” - 50/Case
MT-LO MT-WN
Custom Logo Writing Panel w/Custom Name
MT-AN MT-WL
7 Digit Alphanumerical w/Custom Name Writing Panel w/Custom Logo
MT-AL MT-NO
7 Digit Alphanumerical w/Custom Logo Custom Name
MT-WO MT-WA
Writing Panel Writing Panel, w/7 Digit Alphanumerical
MT-LW MT-BA
Large Writing Panel Bar Code w/7 Digit Alphanumerical
(Minimum Order of 5,000 pieces)
Bar Code your Multilink, Inc. MULTITAG™
and get a second set of bar codes to stick
on the audit work sheet report!
A B
Cable installers love this innovative design. Allows rapid, snap-on installation without special tools (only a screwdriver).
No nails, no staples, no mess. These residential siding clips are trouble-free! The premium grade nylon lasts longer.
Resists weather. Replacement call backs or complaints are virtually eliminated. The customers appreciate the safe and
neat installation. No possible tool damage or punctures to siding. No rust or stain from nails or staples. No deterioration.
FIBER PLUG®
Multilink Plastic Flush Wall Entry Plug
With Built-In Bend Radius System
Single Fed Thru Bushing
Squirrel Guard
• Protect hard and drop cable from hungry squirrels and other pesky rodents with Multilink Squirrel Guard
• Squirrel Guard is now available in two styles
• Both the Green Flex and the Squirrel Guard Slinky are easy to install and will provide superior protection from rodent
damage to your cable
SECTION 6
- 33522 PLT4S-CO 14” UV Tie Wraps 14” 100/Bag
- 33533 T30L 14-1/2” Black Tie Wraps 30# Std. 14.5” 100/Bag
B 24304 74323-TG Tree Guard Black .5” x 6’ 150/Carton
- 24314 73433-TG Tree Guard Black 1” x 6’ 60/Carton
- 24324 73435-TG Tree Guard Black 1.5” x 6’ 28/Carton
- 24334 73437-TG Tree Guard Black 2” x 6’ 20/Carton
C 24503 7003-SGJ Green Flex For RG6 & RG59 - 100/Carton
- 24514 73435-SGT Green Flex 1.5” x 6’ 75/Carton
- 24523 73433-SGT Green Flex 1” x 6’ 75/Carton
- 24512 73435-SGT Green Flex 1.5” x 100 100/Carton
- 73431 73431-SGT Green Flex 0.4310” x 6’ 75/Carton
US Patent 6,378,814B1
SECURITY SEALS &
SECTION 6
Ivory, Dual Hex Holes in Front Ivory, 5/8” Round Center Hole Ivory, F-81
A B
A B C C
SECURITY SEALS &
SECTION 6
D E
Figure Part# Description UOM
D 33700 MP1 Wall Plate Mounting Bracket 100/Box
E 33702 MPLS Wall Plate Mounting Bracket 100/Box
SECTION 6
• Stock one size for direct burial Water Immersion Room temperature for 30 days; 2 foot water head
underground splices Freeze-Thaw Cycling -40°C to 60°C; 2 cycles per day; 1000 cycles
Slat Fog Per ASTM B-368; 30 days
Gelseal™ Re-Enterable
A B C D E
Figure Part# Description Dimensions UOM
- 34120K-OR 3610-GS For RG6/59 Drop Cable Twisted Pair Orange Kit 4”L x 1”W x 1.5”H Each
A 34120K 3610-GS For RG6/59 Drop Cable Twisted Pair Black Kit 4”L x 1”W x 1.5”H Each
B 34122K-OR 3611-GS For RG7/11 Drop Cable Twisted Pair Orange Kit 7.75”L x 1.5”W x 1.75”H Each
C 34123K-OR 3612-GS Splice Repair Kit For 0.412 - 0.750 Feeder Cable Black Kit 12”L x 2.25”W x 3.5”D Each
D 34145K 3614-GS Multi Gelseal™ Splice Orange Kit 6”L x 2”W x 1”D Each
E 10-8342 3612-GS For RG59, RG6, RG7, RG11 and 312 Drop Cable Twisted Pair Black Kit 4.25”L x 2.375”W x 1.5”H Each
applications
• Additional single cable Re-enterable Gelseal™ units for
drop cable twisted pair and feeder cable are available
• Please contact Customer Service for more information
Dielectric Properties
• 500V per mil thickness of gel
3615-GS closed
A - CC-16 Dri-Splice
A
Features & Benefits
• Installs on existing plant connections without having to undo the connections
• Stops incursion of water
• Stops corrosion
• Re-enterable
• Reliable
• Complete kit includes potting bag and 1,500 grams of encaspulant
DROP INSTALLATION HARDWARE
Dri-Tap
For Broadband and Telephony Applications
SECURITY SEALS &
SECTION 6
B
Features & Benefits
• The Dri-Tap is constructed of many field-tested, top grade materials, which have been in service in cable systems for
many years with 100% service ability
• The Dri-Tap bag is made of double polished clear vinyl PVC, temperature rated from 180°F to -20°F
• The base is made of ABS plastic and the rubber grommet and bands are made from neoprene rubber with a built in
ozone retardant
• The carriage bolt and T-Bolt band chain are made of 100% stainless steel for many years of service and reliability
• The Dri-Tap is designed for flush grade installations in vaults where water tables, rain, and snow falls can fill up vaults
and flood out passives
• The rubber grommet holds up to eight RG6 drop cables for installation with taps and passives
• Unlike the hard clear or green dome style underground housings, the Dri-Tap uses the clear poly bag design to squeeze
the moisture and air out of the housing
Figure Part# Description Dimensions UOM
A 34201K 12615-CR Potting Kit - Each
B 34300K 4000-DT Dri-Tap For 0.500 Cable 6.5” Diameter Each
B 34301K 4750-DT Dri-Tap For 0.750 Cable 6.5” Diameter Each
B 34302 4024-RT Replacement Bag 6.5” x 28” Each
INSTALLATION PRODUCTS
PLASTIC & STEEL
SECTION 7
Features
• Large Capacity Raceway
• Route Power and Communications Cabling Simultaneously
• Aesthetically Pleasing Design
• Meets TIA Minimum Requirements for Bend Radius
• UL Listed
INSTALLATION PRODUCTS
PLASTIC & STEEL
SECTION 7
MRM 400-XX-T Base and Cover MRM 400-XX-T Base and Cover
MRF 400-D-XX Divider
Shown with one divider in center
INSTALLATION PRODUCTS
PLASTIC & STEEL
SECTION 7
MRM 400-XX-T Base and Cover MRM 400-XX-T Base and Cover
MRF 400-D-XX Divider MRF 400-D-XX Divider
Shown with two dividers Shown with three dividers
MRM 400-XX-T Base and Cover MRM 400-XX-T Base and Cover
MRF 400-D-XX Divider MRF 400-D-XX Divider
Shown with one divider on the left side only Shown with one divder on the right side only
A B C
Base & Cover sold together
INSTALLATION PRODUCTS
D E F
Standard colors are Ivory, White and Office White. Replace XX with I, W or OW for color designation
Custom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings). Call Customer Service for more information
A B C
D E F
Standard colors are Ivory, White and Office White. Replace XX with I, W or OW for color designation
Custom colors available on molding for a minimum run of 3,000 FT (500 pieces for fittings). Call Customer Service for more information
INSTALLATION PRODUCTS
PLASTIC & STEEL
SECTION 7
Features
• Architectural Wave Cove Raceway holds category 5 cables to a 1” bend radius thus
maintaining end to end connectivity, even when filled to capacity or pulled
through the raceway
• The Raceway is available with an adhesive back for fast and easy installation
• Aesthetically blends with drop ceilings
• Efficient for moves, adds and changes
• No need to move furniture
A A B B
Lance Option Available
C C D E
Figure Part# Description Dimensions UOM
INSTALLATION PRODUCTS
A B D
INSTALLATION PRODUCTS
A 84125-VM-XX Cove Molding 2.75” x 8’ 240’ / Ctn
Features
• Fast Mounting One Piece Design
• Architectural MutiRaceway holds communication cables to a 1 inch bend radius,
thus maintaining end to end connectivity even when filled to capacity or pulled
through the raceway
• The one piece design constructed of 94V-0 rigid vinyl features a highly flexible
hinge and self-locking latch
• This can be easily accessed as many times as necessary without stress cracking
or discoloration
UL Listed Material
A-C
INSTALLATION PRODUCTS
PLASTIC & STEEL
SECTION 7
A B C
A B C
A B C D
E F G H
INSTALLATION PRODUCTS
A MRF75-ICR-XX Inside Corner Fitting For MRM75 And MRC75 .75” 0.40 Lbs / Pk 10 / Pk
A MRF12-ICR-XX Inside Corner Fitting For MRM12 And MRC12 1.25” 0.60 Lbs / Pk 10 / Pk
A
INSTALLATION PRODUCTS
PLASTIC & STEEL
SECTION 7
B C
D E
Figure Part# Description Dimensions Weight UOM
A MRFUV-WE-XX Wall Entry Fitting For All Sizes Of MRM And MRC - 1.60 Lbs Each
B MJB-1-XX Single Gang Surface Mount Box 3.25” x 5” x 2” 0.20 Lbs Each
C MJB-2-XX Double Gang Surface Mount Box 5” x 5.25” x 2” 0.25 Lbs Each
D MWP-13-XX Single Gang Face Plate (3 Port Capacity) 2.75” x 4” x .5” 0.10 Lbs Each
E MWP-16-XX Single Gang Face Plate (6 Port Capacity) 2.75” x 4” x .5” 0.10 Lbs Each
INSTALLATION PRODUCTS
MRF12-ICR (includes base & cover) 1.25" inside corner ICFC5 2817 TSR2-33-1 N/A
Call Customer Service if the style you are interested in is not listed
Multilink’s Installation & Construction Catalog 81
RACEWAY
MRM Series Raceway Fill Chart
MRM 75 MRM12 MRM17
Wire Type Size Diameter 40% MAX 40% MAX 40% MAX
Coax RG6/U 0.27 1 2 4 8 9 16
RG59/U 0.242 1 2 5 10 12 20
RG62/U 0.242 1 2 5 10 12 20
RG58/U 0.193 3 5 9 15 18 30
Twisted Pair 2 pr 0.14 5 10 17 30 35 60
24 AWG 3 pr 0.15 4 8 15 25 31 50
Unshielded 4 pr 5E 0.217 2 4 7 12 14 25
4 pr 6 0.24 1 2 5 10 12 20
25 pr 0.41 0 1 2 4 4 7
Fiber Optic 2 strand 0.175 3 6 11 18 23 36
FA Jacket 4 strand 0.185 3 5 10 16 20 32
OFNP 6 strand 0.21 2 4 7 12 15 25
Electrical 14 AWG 0.105 7 10 14
12AWG 0.122 5 8 11
10AWG 0.153 3 5 6
INSTALLATION PRODUCTS
PLASTIC & STEEL
40% - Column follows the guidelines of EIA/TIA for cable fill allowing for additions after install
SECTION 7
MAX - Marketing recommended maximum fill based on bend radius and internal cabling area
Note - UL material used in MRM series raceway manufacturing
Product not currently UL listed
A B C C
Features & Benefits
• These plates feature unique protrusion and indentation that protects cable/wiring and/or connectors from contact
with furniture, TVs, or other household appliances that are routinely placed close to the wall
• Perfectly suited for both CATV and LAN applications
• Recommended for residential and institutional applications
• Protect your investment and avoid costly repair calls
• Perfect for college dorm rooms, offices, and in the home
• Can be customized to fit any size connector or cable
INSTALLATION PRODUCTS
Figure Part# Description UOM
SECTION 7
B WP-1SR-XX Recessed Wall Plate Each
C SWWICT Ivory Protruding Wall Plate For Mod Jack And F81 Each
- SWWWCT White Protruding Wall Plate For Mod Jack And F81 Each
D E F
A B C D
E F G H
Figure Part# Description Dimensions UOM
A MRL20-XX Lock Molding Top/bottom Exterior Grade 2”W x .36”H x 8’L 160’ / Ctn
A MRL10-XX Lock Molding Top/bottom Exterior Grade .75”W x .18125”H x 8’L 360’ / Ctn
B MRF25-ICR-XX Inside Corner Fitting (Cover And Base Included) 2” Each
INSTALLATION PRODUCTS
A B
Available by special order only Available in Exterior Ivory
INSTALLATION PRODUCTS
B 84200-SQ Molding Base Only 2” x 1” x 8’ 8’
A-B C D E
F G H I-J
Figure Part# Description Dimensions UOM
INSTALLATION PRODUCTS
Full Length
Backing Track Molding Riser Guard And Mounting Strap
A B C
Features & Benefits Features & Benefits
• Full Length Backing Track • Both the Riser Guard and Mounting Strap are made from UL Listed PVC
Molding (also available with materials
Adhesive Full Length Backing for • Two mounting straps for every four feet of riser guard are recommended
interior use only) uses the same • The mounting strap concept allows the installer to slide the strap into the
molding cover and fittings as the position needed unlike any other riser guards in that it has the handy side
High Security Track Molding flange that locks into one position
INSTALLATION PRODUCTS
• The full length backing is easy to • Like mounting brackets, the mounting straps allow the riser guard to expand
SECTION 7
surfaces • Standard colors are beige, brown and brick red
• Standard colors are beige, brown • Custom colors available with orders of 3,000 ft or more
and brick red
• Custom colors available with
orders of 3,000 ft or more
Custom colors available on molding for a minimum run of 3,000 ft. (500 pieces for fittings)
Call Customer Service for more information
A B C
D E
Figure Part# Description Dimensions UOM
A 84026-IE Inside Elbow Fitting For Flat Box Molding .5” Each
INSTALLATION PRODUCTS
A 84036-IE Inside Elbow Fitting For Flat Box Molding .75” Each
PLASTIC & STEEL
SECTION 7
A 84126-IE Inside Elbow Fitting For Flat Box Molding 1.25” Each
A 84206-IE Inside Elbow Fitting For Flat Box Molding 2” Each
B 84027-OE Outside Elbow Fitting For Flat Box Molding .5” Each
B 84037-OE Outside Elbow Fitting For Flat Box Molding .75” Each
B 84127-OE Outside Elbow Fitting For Flat Box Molding 1.25” Each
B 84207-OE Outside Elbow Fitting For Flat Box Molding 2” Each
C 84024-FE Flat Elbow Fitting For Flat Box Molding .5” Each
C 84034-FE Flat Elbow Fitting For Flat Box Molding .75” Each
C 84124-FE Flat Elbow Fitting For Flat Box Molding 1.25” Each
C 84204-FE Flat Elbow Fitting For Flat Box Molding 2” Each
D 84023-C End Cap Fitting .5” Each
D 84033-C End Cap Fitting .75” Each
D 84123-C End Cap Fitting 1-1/4” Each
D 84203-C End Cap Fitting 2” Each
E 84209-12-T Tee Reducer 2” x 1.25” x .5” Each
A B C D
Figure Part# Description Dimensions UOM
A 84032-DSC Drop Splice Fitting .75”W x 12”L Each
A 84122-DSC Drop Splice Fitting 1.25”W x 12”L Each
A 84222-DSC Drop Splice Fitting 2”W x 12”L Each
B 84022-SC Seam Cover / Joint Cover Fitting .5” x 1.5” Each
B 84032-SC Seam Cover / Joint Cover Fitting .75” x 1.5” Each
B 84122-SC Seam Cover / Joint Cover Fitting 1.25” x 1.5” Each
B 84202-SC Seam Cover / Joint Cover Fitting 2” x 1.5” Each
B 84302-SC Seam Cover / Joint Cover Fitting 3” x 1.5” Each
C B-16000 Quick Dry Weld In A Tube - Each
INSTALLATION PRODUCTS
D 8450-ATR Double Sided Adhesive Backing .5” x 216’ Each
D 8451-ATR Double Sided Adhesive Backing .875” x 216’ Each
A B C D
Figure Part# Description Dimensions UOM
A 84140-FBMH Flat Box Molding 2”W x .75”H x 8’L 192 / Ctn
A 84180-FBMH Flat Box Molding 2”W x 1.25”H x 8’L 144’ / Ctn
A 84200-FBMH Flat Box Molding 2”W x 2”H x 8’L 64’ / Ctn
A 84242-FBMH Flat Box Molding 2.125”W x 2.5”H x 8’L 64’ / Ctn
B 84146-IE/FBM Inside Elbow .75” x 2” x 8” Each
B 84186-IE/FBM Inside Elbow 1.25” x 2” x 8” Each
INSTALLATION PRODUCTS
INSTALLATION PRODUCTS
PLASTIC & STEEL
SECTION 7
A B C
Standard colors are Beige, White, Dark Brown and Dark Red.
A B C
D E
INSTALLATION PRODUCTS
PLASTIC & STEEL
Standard colors are Beige, White, Dark Brown and Dark Red
A B C
D E F
INSTALLATION PRODUCTS
PLASTIC & STEEL
Figure Part# Description Dimensions Weight UOM
SECTION 7
A 84034-FEMB Flat 90 Degree Elbow Fitting .75” 0.16 Lbs Each
A 84124-FEMB Flat 90 Degree Elbow Fitting 1.25” 0.30 Lbs Each
A 84204-FEMB Flat 90 Degree Elbow Fitting 2” 0.37 Lbs Each
A 84304-FEMB Flat 90 Degree Elbow Fitting 3” 0.49 Lbs Each
B 84128-03-T Tee Reducer Fitting 1.25” x .75” 0.33 Lbs Each
B 84208-03-T Tee Reducer Fitting 2” x 1.25” 0.35 Lbs Each
B 84308-12-T Tee Reducer Fitting 3” x 1.25” 0.37 Lbs Each
C 84033-SCM Seam Cover Fitting .75” x 3” 0.07 Lbs Each
C 84122-SCM Seam Cover Fitting 1.75” x 3” 0.08 Lbs Each
C 84222-SCM Seam Cover Fitting 2” x 3” 0.10 Lbs Each
C 84302-SCM Seam Cover Fitting 3” x 3” 0.15 Lbs Each
D 84J251 Cutting Tool For Steel Molding - - Each
E 84002-ET Entry Tool For Molding - 0.05 Lbs Each
F 12716 Beige Touch Up Paint 13 oz 0.70 Lbs Each
F 12715 Brown Touch Up Paint 13 oz 0.70 Lbs Each
F 12717 Brick Red Touch Up Paint 13 oz 0.70 Lbs Each
F 12718 White Touch Up Paint 13 oz 0.70 Lbs Each
Standard colors are Beige, White, Dark Brown and Dark Red
G
D F
A
B C
E
H
SECTION 8
Stock ID Description Std. CRT Size UOM
25913 84030-MBL / Full length Metal Backing for 10/Pack Each
3/4” Metal Molding
25933 84120-MBL / Full Length Metal Backing for 10/Pack Each
1-1/4” Metal Molding
25993 84200-MBL / Full Length Metal Backing for 10/Pack Each
2” Metal Molding
25934 84300-MBL / Full Length Metal Backing for 10/Pack Each
3” Metal Molding
T Fitting Stock ID
Description Beige Brick Red Brown White Carton Qty UOM
84038-TMB 3/4” 25417 25419 25418 25420 10/Pack Each
84128-TMB2 1-1/4” 10-9282 10-9283 10-9281 10-9280 10/Pack Each
84208-TMB2 2” 10-9290 10-9291 10-9289 10-9288 10/Pack Each
84308-TMB 3” 25494 25495 25496 25006 10/Pack Each
SECTION 8
84033-SCM Seam Cover Fitting 3” x 3” 0.15 10/Pack Each
Standard Colors are Beige, Brick Red, Brown & White
D E
C
B
F
E F
C
D
G
H
* Manufactured Out Of Special Heat Resistant Material
Stock ID Part # Description Color Std. CRT Size UOM
A 10-9398 MRF12-TRT-IV “T” Fitting & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
A 10-9397 MRF12-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
SECTION 8
Not Sold Separately
A 10-9394 MRF75-TRT-LW “T” Fitting & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
A 99615K MRF75-TRT-I .75” Tee Fitting for MRM75 and MRC75 Ivory 10 Pack
A 99616K MRF75-TRT-W .75” Tee Fitting for MRM75 and MRC75 White 10 Pack
A 99614K MRF75-TRT-OW .75” Tee Fitting for MRM75 and MRC75 Office White 10 Pack
A 99620K MRF12-TRT-I 1.25” Tee Fitting for MRM12 and MRC12 Ivory 10 Pack
A 99621K MRF12-TRT-W 1.25” Tee Fitting for MRM12 and MRC12 White 10 Pack
A 99623K MRF12-TRT-OW 1.25” Tee Fitting for MRM12 and MRC12 Office White 10 Pack
A 99625K MRF17-TRT-I 1.75” Tee Fitting for MRM17 and MRC17 Ivory 10 Pack
A 99626K MRF17-TRT-W 1.75” Tee Fitting for MRM17 and MRC17 White 10 Pack
A 99624K MRF17-TRT-OW 1.75” Tee Fitting for MRM17 and MRC17 Office White 10 Pack
D 10-9495 MRF12-OCR-LW OC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
D 10-9504 MRF17-OCR-IV OC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
D 10-9503 MRF17-OCR-LW OC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
D 10-9476 MRF75-OCR-IV OC & Radius for Sq. Plastic & Latch Duct Ivory* 10 Pack
D 10-9477 MRF75-OCR-LW OC & Radius for Sq. Plastic & Latch Duct Linen White* 10 Pack
D 99441K MRF75-OCR-I .75” OC Fitting for MRM75 & MRC75 Ivory 10 Pack
D 99442K MRF75-OCR-W .75” OC Fitting for MRM75 & MRC75 White 10 Pack
D 99443K MRF75-OCR-OW .75” OC Fitting for MRM75 & MRC75 Office White 10 Pack
D 99446K MRF12-OCR-I 1.25” OCr Fitting for MRM12 & MRC12 Ivory 10 Pack
D 99447K MRF12-OCR-W 1.25” OC Fitting for MRM12 & MRC12 White 10 Pack
D 99445K MRF12-OCR-OW 1.25” OCr Fitting for MRM12 & MRC12 Office White 10 Pack
D 99451K MRF17-OCR-I 1.75” OC Fitting for MRM17 & MRC17 Ivory 10 Pack
D 99452K MRF17-OCR-W 1.75” OC Fitting for MRM17 & MRC17 White 10 Pack
D 99450K MRF17-OCR-OW 1.75” OC Fitting for MRM17 and MRC17 Office White 10 Pack
SECTION 8
- 10-9400 MRF17-JC-LW Join Cover for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 10-9474 MRF75-JC-IV Join Cover for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9475 MRF75-JC-LW Join Cover for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 99411K MRF75-JC-I .75” Joint Cover Fitting for MRM75 & MRC75 Ivory 10 Pack
- 99412K MRF75-JC-W .75” Joint Cover Fitting for MRM75 & MRC75 White 10 Pack
- 99413K MRF75-JC-OW .75” Joint Cover Fitting for MRM75 & MRC75 Office White 10 Pack
- 99416K MRF12-JC-I 1.25” Joint Cover Fitting for MRM12 & MRC12 Ivory 10 Pack
- 99417K MRF12-JC-W 1.25” Joint Cover Fitting for MRM12 & MRC12 White 10 Pack
- 99418K MRF12-JC-OW 1.25” Joint Cover Fitting for MRM12 & MRC12 Office White 10 Pack
- 99421K MRF17-JC-I 1.75” Joint Cover Fitting for MRM17 & MRC17 Ivory 10 Pack
- 99422K MRF17-JC-W 1.75” Joint Cover Fitting for MRM17 & MRC17 White 10 Pack
- 99423K MRF17-JC-OW 1.75” Joint Cover Fitting for MRM17 & MRC17 Office White 10 Pack
Stock ID Part # Description Color Std. CRT Size UOM
- 10-9490 MRF12-EC-IV End Cap for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9469 MRF12-EC-LW End Cap for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 10-9491 MRF12-EC-IV End Cap for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9470 MRF17-EC-LW End Cap for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 10-9488 MRF75-EC-IV End Cap for Sq. Plastic & Latch Duct Raceway Ivory 10 Pack
- 10-9489 MRF75-EC-LW End Cap for Sq. Plastic & Latch Duct Raceway Linen White 10 Pack
- 99645K MRF75-EC-I .75” End Cap Fitting for MRM75 & MRC75 Ivory 10 Pack
- 99646K MRF75-EC-W .75” End Cap Fitting for MRM75 & MRC75 White 10 Pack
- 99647K MRF75-EC-OW .75” End Cap Fitting for MRM75 & MRC75 Office White 10 Pack
- 99651K MRF12-EC-I 1.25” End Cap Fitting for MRM12 & MRC12 Ivory 10 Pack
- 99652K MRF12-EC-W 1.25” End Cap Fitting for MRM12 & MRC12 White 10 Pack
- 99653K MRF12-EC-OW 1.25” End Cap Fitting for MRM12 & MRC12 Office White 10 Pack
- 99656K MRF17-EC-I 1.75” End Cap Fitting for MRM17 & MRC17 Ivory 10 Pack
- 99657K MRF17-EC-W 1.75” End Cap Fitting for MRM17 & MRC17 White 10 Pack
- 99658K MRF17-EC-OW 1.75” End Cap Fitting for MRM17 & MRC17 Office White 10 Pack
D F
B
C
B 10-9423 MRC17-E-IV Sq. Plastic Molding w/ Non-Adhesive Backing Exterior Grade 160 Feet
SECTION 8
A
B
C
D
F I
E
H
Patent In Process
SECTION 8
Stock ID Part # Description Color Std. CRT Size UOM
B 10-9387 MRW-15-IV Overlay Molding/Open Crown 1.5” x .75” for MDU Ivory 10 Pack
B 10-9386 MRW-15-LW Overlay Molding/Open Crown 1.5” x .75” for MDU Linen White 10 Pack
Overlay Molding was designed to be installed over an existing provider’s molding system. It is a two piece design, which
TM
allows for access to the first molding system without disconnecting any cables. The cover of the overlay simply snaps
onto the base which is mounted below the existing molding and “covers up” the existing molding and the new base. The
base of the Overlay Molding has a smooth co-extruded flexible cable keeper which won’t damage any cables during
TM
installation or removal. The corner pieces include bend radius protectors to maintain the minimum bend radius of 1”.
A D
SECTION 8
Stock ID Part # Description Color Std. CRT Size UOM
B 10-9409 FDF3-OCR-IV OC & Radius for Single Fiber Drop Molding Ivory 10 Pack
B 10-9408 FDF3-OCR-LW OC & Radius for Single Fiber Drop Molding Linen White 10 Pack
Not Sold Separately
FIBER PLUG®
Multilink Plastic Flush Wall Entry Plug
With Built-In Bend Radius System
Patent In Process
Stock ID Description Dimensions Weight Lbs. UOM
649-022-12 Flush Wall Entry Plug Bend Radius Protector Interior and - - 100/Bag
Exterior Use Color: Ivory Only ( IV )
039-143-12
PLASTIC & STEEL INSTALLATION