Beruflich Dokumente
Kultur Dokumente
Multilink is excited about the coming year ahead because of the people we have working to
better service our customers’ needs. We will focus on keeping cost under control, maintaining
quality standards, continuing product reliability, providing on-time delivery, and meeting our
customers’ market-specific needs.
Some people say that your environment is a reflection of your experiences. Multilink has been
able to understand where we fit in your environment with manufacturing cost effective solutions
and technicians that make your job more productive when servicing your customers needs.
Listing your needs in a step-by-step way insures Multilink that we have created the right fit
between our product and customer. We hope that if our organization is not serving you to our
best ability that you give me a call at 440.366.6966.
Sincerely,
Steve E. Kaplan
CEO
VIDEO
View an Installation Video.
Now you have round-the-clock
installation training for your
Power Maintenance Staff 24.7.365.
Just go to www.multilinkone.com.
Optional BluetoothTM wireless local access to power supply performance and status up to 100’ away.
Bluetooth is a registered trademark of Bluetooth SIG, Inc., USA
Status at
a Glance
Low Battery
Ripple
Transfer relay
tested to
1,000,000
Direct Core operations
Cooling
Resetable Output
Circuit Breaker
No Fuses To Replace
PATENT PENDING
Enclosed
Cooling Duct
744-363-20 BLACK HAWK EMBEDDED MONITOR DOCSIS EMBEDDED STATUS MONITOR FOR BLACK HAWK
Optional BluetoothTM wireless local access to power supply performance and status up to 100’ away.
Bluetooth is a registered trademark of Bluetooth SIG, Inc., USA
60Hz
+/- 3Hz
Thermistor &
MOV Protection
120V
+/- 15%
1
10 ms
50 V
No Isolation
2 Little Protection
20 ms
20.0 V
Output Is
Sometimes
Interrupted
Status
Monitoring Charger Output
Interface Limited - 6A At
Full Load
Option At
Added Cost
Risk Outage To
Complex Test Battery
Controller & Inverter
400A Inrush
Isolation Current May
Line Trip Breaker
Relay
Sense
Must Disconnect
For Inverter
Ferro
Transfer On
Transients
And Noise
Battery Output
Charger
Must Connect
For Inverter
Fans Required
Inverter
Cold Start
Inverter
Specifications
Weight 45 lbs
Environmental -40C to 60C 0-95% RH non-condensing
Protection 85A battery circuit breaker
Temperature Sensor 2 pin mini mate-n-lock
Optional BluetoothTM wireless local access to power supply performance and status up to 100’ away.
Bluetooth is a registered trademark of Bluetooth SIG, Inc., USA
The MP Plus power supply traces its roots to services started in 1998 with its forerunner, the MP True UPS. At that time, power
supplies based on the true UPS concept constituted the largest trouble-free installations of any CATV / Broadband network
power supply in the world. The key to part of this success is the universal input that allows this particular power supply to operate
from a wide range of voltages. Consequently, line voltage spikes, sags and minor surges that occur daily on the AC utility lines
are absorbed in the input circuits of the MP Plus power supply. If a brownout, blackout or momentary loss of AC power occurs,
the transfer to the battery backup inverter is seamless with absolutely no power anomalies being reflected to the load. Circuit
topology within the MP Plus series provides a true UPS product suitable for today’s mission-critical applications, offering the best
and most reliable back-up source for services such as VoIP and others. Standby power supplies simply cannot provide the quality
of power and the ongoing reliability offered in the MP Plus True UPS power supply.
New Features:
- HMS RS485 serial status monitoring
- Compatible with StatTrak/Tollgrade/Cheetah/Electroline
- Electronically controlled output current protection, no Smart Breaker required
- Smaller physical package, the MP Plus is 1/2” shallower than the previous supply (12” X 16.25” X 8.625”)
- Redesigned top cover to reduce water migration
- Externally located input and output circuit breakers
- Output voltage tap is accessible without removing front panel
All of this is monitored with no external hardware, such as line sense transformers or output voltage wire harnesses. This
reduces the complexity of installation and reduces clutter in the enclosure. The Power Supply to Transponder Interface Bus
(PSTIB) is designed to allow up to 32 devices. Locations with multiple power supplies can use a single transponder to monitor
all of the power supplies.
To monitor individual battery voltages, Mulitlink is offering the MPHMS Battery Monitor. This device is capable of monitoring
up to 16 batteries and communicates to the HMS transponder over the same PSTIB as the power supply.
Optional BluetoothTM wireless local access to power supply performance and status up to 100’ away.
Bluetooth is a registered trademark of Bluetooth SIG, Inc., USA
Dual Outputs
Electronically Can Run 90 And 60 Volt Easy Access
Controlled Output Plant On Each Output Output Selector
Current Protection No Dip Switches Universal Input Offers
“Self Resets” To Mess With A Wide Range Of Input
Voltage And Frequency
Dual Heat
Sinks
LCD
Display
Standard
Battery
Connector
Circuit Breakers
No Fuses To
Replace HMS RS485
Serial Status
Monitoring
Rides Through
Transients & Noise
65z
to 65Hz
True
UPS 3
10 ms
20.0 V
Standard
Feature
Simplified
Controller
AC Converted DC Converted
To DC To AC
High Voltage
Rectifier
Inverter
Soft Start-No
Inrush Current
Ferro
Simultaneous
Inverter Operation
No Switching
Output
Battery
Charger
No Risk Battery
& Inverter Test
The MPS-TM assembly is a portable, non-standby power supply used as a service supply that provides conditioned AC
power to the cable plant load when the main power supply is taken off-line for service. Used in conjunction with an AC
output cable and the source selector switch in the enclosure’s power inserter (PIM-G), service supply with minimum
interruption. The MPS-TM assembly is equipped with tap settings that allow convenient selection of 60, 75, or 90 VAC
output, suitable for a wide range of applications.
The MPS-TM Service Supply Is Available In 900 And 1350 Watt Output Ratings
MPS 900 MPS 1350(120V) MPS 1350(240V)
Input Voltage 120AC nominal 120AC 240AC
Input Current 12 MAX 17 MAX 9 MAX
Input Frequency 60 Hz 60 Hz 60 Hz
Output Voltage 60/75/90VAC 60/75/90VAC 60/75/90VAC
Output Current 15/12/10A 22.5/18/15A 22.5/18/15A
Output Power 900VA 1350VA 1350VA
Output Current Limit 150% Max of Full Load Rating 150% Max of Full Load Rating 150% Max of Full Load Rating
Efficiency Line mode: 90% typical (at full load) Line mode: 90% typical (at full load) Line mode: 90% typical (at full load)
Finish Diamond Black Diamond Black Diamond Black
Operating Temperature Range -40°F to 122°F -40°F to 122°F -40°F to 122°F
-40°C to 50°C -40°C to 50°C -40°C to 50°C
Dimensions 8”H x 6 1/2”W x 11 1/2”D 8”H x 6 1/2”W x 11 1/2”D 8”H x 6 1/2”W x 11 1/2”D
(203mm x 165mm x 292mm)” (203mm x 165mm x 292mm) (203mm x 165mm x 292mm)
Weight 45 lbs/20 kg 60 lbs/27 kg 60 lbs/27 kg
Input Cord Grip 5-15P 5-20P 6-15P
*1. Replacement battery must be same type , chemistry, size, and AH rating.
*2. On 36V systems, one balancer is required for every string of three batteries. On 48V systems one balancer is required for every string of four batteries.
With Balancer
13.5v #1 Low
CATV Battery
40.5v Power Cutoff
BBN 13.5v #2 Supply Monitor
Total 36
13.5v #3 Float Charging
(Assume 250 c Temperature
All Batteries Have Correct Voltage And Are Just Right
Technical Specifications
Balance Rate
48 hours typical to 66 mV after complete discharge/recharge cycle, measured using new
100AH batteries
Maximum String Charge
Current limited by capability of CATV power supply charger
Environmental
-40ºC to +60ºC, 0-99%RH non-condensing
Balance Accuracy
65mV per battery or better when battery capacity mismatch does not exceed 20%
Overload Protection
Electronic self-resetting current protection. Accidental reverse polarity protection
Specifications
PV31 PV27 AGM
Model 032-027-10 032-028-10 SK1200-SW
Battery Type SN Alloy SN Alloy
Cells per Unit 6 6 6
Voltage per Unit 12 12 12.8
Conductance Value 1000 1000 1000
Max Discharge current(A) 900 900 850
Short Circuit Current(A) 2600 2600 3400
10 Second Volts @ 100 Amp 11.2 11.2 11.4
Ohms Impedance 60Hz 0.0055 0.0055 0.006
Capacity at 20 hours (to 1.75VPC) 107 Ah 92 Ah 89 Ah
BCI Group Size 31 31 31
Gel AGM
Specifications Specifications
Front Terminal AGM Battery Front Terminal Gel Battery
Nominal Voltage 12V Nominal Voltage 12V
Rated Capacity 10 hour rate to 1.80Vpc) 110AH Rated Capacity (10 hour rate) 100AH
Rated Capacity 108AH Total Height (with 285mm (11.22 inches)
(8 hour rate to 1.75Vpc) Dimension terminals)
Total Height 285mm (11.22 inches) Height 285mm (11.22 inches)
Dimension (with terminals)
Length 394mm (15.51 inches)
Height 285mm (11.22 inches)
Width 110mm (4.33 inches)
Length 394mm (15.51 inches)
Weight Approx. 37.0kg (81.57 lbs)
Width 110mm (4.33 inches)
Weight Approx. 37.0kg (81.57 lbs)
Characteristics
Characteristics Capacity 77F (25C) 20 hour rate (5.38A) 107.5AH
Capacity 77F (25C) 10 hour rate (11A) 110AH 10 hour rate (10A) 100AH
8 hour rate (13.5A) 108AH 5 hour rate (18.3A) 91.4AH
5 hour rate (20.1A) 105.5AH 1 hour rate (64.5A) 64.5AH
1 hour rate (71A) 71AH 15 min rate (188A) 47AH
Internal Resistance Full charged 77F (25C) 3.3mΩ Internal Resistance Full charged 77F (25C) 3.3mΩ
Capacity affected 104F (40C) 102% Capacity affected 104F (40C) 102%
by Temperature by Temperature
(20 hour rate) (20 hour rate)
77F (25C) 100% 77F (25C) 100%
32F (0C) 85% 32F (0C) 85%
5F (-15C) 65% 5F (-15C) 65%
Self-Discharge Capacity after 3 month 91% Self-Discharge Capacity after 3 month 91%
77F (25C) storage 77F (25C) storage
Capacity after 6 month 82% Capacity after 6 month 82%
storage storage
Capacity after 12 month 64% Capacity after 12 month 64%
storage storage
Max. Discharge 1500A (5S) Max. Discharge 1500A (5S)
Current 77F (25C) Current 77F (25C)
Terminal Standard F17 Terminal Standard F17
Optional Optional
Charging Cycle Initial Charging Current Charging Cycle Initial Charging Current
(Constant Voltage) 22A or Small 14.5V (Constant Voltage) 20A or Small 14.5V
- 14.9V/ 77F (25C) - 14.9V/ 77F (25C)
Float 13.6V - 13.8V / 77F (25C) Float 13.6V - 13.8V / 77F (25C)
030-049-10
Designed to house broadband power supplies and batteries in any pole-mounted application.
Standard features include durable construction with exterior finished in light equipment gray powder
paint. Custom colors are available upon request.
Totally enclosed design offers highest security from tampering or unauthorized entry, yet provides
flexibility in locating utility and cable entrance locations.
Battery slide trays lock in both closed and extended positions.
Front door is hinged for easy-open access, but is also removable for ease of installation and service of
enclosed equipment. Door is locked in the closed position with high-security latches.
Flat roof with side flanges affords a rainproof design, yet flips up to allow unhindered access to
equipment and battery spaces.
Optional life saver vented roof available.
030-068-10
030-049-10
Designed to house broadband power supplies and batteries in any ground mounted application.
Standard features include durable construction with exterior finished in light equipment gray powder
paint. Custom colors are available upon request.
Totally enclosed design offers highest security from unauthorized tampering or entry, yet provides
flexibility in locating utility and cable entrance locations.
Battery slide trays lock in both closed and extended positions.
Front door is hinged for easy-open access, but is also removable for ease of installation and service of
enclosed equipment. Door is locked in the closed position with high-security latches.
Flat roof with side flanges affords a rainproof design, yet flips up to allow unhindered access to
equipment and battery spaces.
Optional life saver vented roof available.
US Patent 6,932,443.B1
Typical ground mount enclosure equipped with optional life saver vented roof
Designed to house broadband power supplies and batteries in any ground-mounted application.
May be used with pre-cast or poured-in-place concrete pads, vaults or any other desired mounting
options.
Open bottom design accommodates all vault-and-pad installations, allowing flexibility of utility and
cable entrance locations.
Standard features include durable construction with exterior finished in light equipment
gray powder paint. Custom colors are available upon request.
Battery slide trays lock in both closed and extended positions.
Front and rear doors are removable for ease of installation and service of enclosed equipment. Doors
are locked in the closed position with high-security latches.
030-043-10
030-016-10
Designed to house broadband power supplies and batteries in any pole-mounted application.
Standard features include durable construction with exterior finished in light equipment gray powder
paint. Custom colors are available upon request.
Open bottom design accommodates all vault-and-pad installations, allowing flexibility of utility and
cable entrance locations.
Totally enclosed design offers highest security from tampering or unauthorized entry, yet provides
flexibility in locating utility and cable entrance locations.
Battery slide trays lock in both closed and extended positions.
Front door is hinged for easy-open access, but is also removable for ease of installation and service of
enclosed equipment. Door is locked in the closed position with high-security latches.
Part # Description
030-144-10 GM-PS-3 Mini 3 Battery Ground Mount Enclosure
030-142-10 GM-PSN-3 3 Battery Ground Mount / Fiber Node Enclosure
Designed to EUSERC standards; will accommodate either ring-type or ringless meter base.
In the MPC-Series cabinets, optional test/bypass blocks allow testing, servicing or replacement of the
internal kilowatt-hour meter without affecting utility service to the power supply.
Rainproof enclosure (Type 3R) will house broadband power supplies and batteries in ground-mounted
configuration.
May be used with pre-cast or poured-in-place concrete pads or vaults.
Open bottom design accommodates all vault-and-pad installations, allowing flexibility of utility and
cable entrance locations.
Standard features include durable construction with exterior finished in light equipment gray powder
paint. Custom colors are available upon request.
Battery slide trays lock in both closed and extended positions.
Separate lockable, sealed utility and cable compartments allow for craft separation and exclusive access.
Front and rear doors are removable for ease of installation and service of enclosed equipment. Doors are
locked in the closed position with high-security latches.
Please see ordering guide on the following page for the above unit and options
Hasp Lock
Part # Description
016-022-20 Power Supply Non-Standby 60HZ
W/O Enclosure 1350-1206-60/90
Multilink offers the convenience of providing an easily transportable standby generator suitable for use as a power
source with its products. This generator has been tested in trials with our MP900, MP1350 and MPS1350 products and
found to be an adequate standby AC/DC source for these applications.
Part # Description
041-005-10 Generator Portable 3KW 36VDC Gasoline
041-006-10 Generator 5KW 36VDC
The Smart Breaker continuously monitors the cable plant current draw. When a fault causes the load current to exceed a
programmable threshold, the Smart Breaker quickly disconnects the cable plant from the power supply, thereby protecting
both the plant and power supply from overload damage. After a short interval, the Smart Breaker will attempt to reapply
power and restore normal plant operation. If the fault has cleared, the Smart Breaker will restore plant power and continue to
monitor the current draw. Should a fault continue to exist, the Smart Breaker will try to restart the cable plant a programmed
number of times before shutting down and aborting any further attempts to restore power. The quick acting disconnect action
of the Smart Breaker reduces power supply output fuse stress and can reduce or eliminate the problem of fuse failure and
attendant maintenance problems triggered by brief accidental plant short circuits. The Smart Breaker is compatible with any
60V or 90V Standby or UPS power supply supporting a load of 20A or less.
Automatically switches from the primary utility grid to a second utility grid in case of a
power failure. The second source preserves the battery charge until both utility sources
fail. Indicator light shows status of both primary and secondary source.
Part # Description
744-379-20 Dual Source Switch
Outlet Kits
035-007-10 DOK-1 Duplex Outlet Kit 120V Each
035-008-10 DOK-2 Duplex Outlet Kit 240V Each
Battery Blanket
TBD Battery Blanket Each
Light Kits
035-003-10 ELK-1 Enclosure Light Kit Each
035-014-20 Enclosure Light Kit (Lectro Option) Each
035-015-10 Economy Enclosure Light Kit ELK-1E Each
035-016-20 ALK-1 Standby Light Kit (Alpha Option) Each
035-036-20 ALK-1 SIL-E Standby Light Kit (Economy) Each
General Specifications
Dimensions 28” W x 65” H x 83.82” D
(71.12cm x 165.1cm x 77.47cm)
Weight 230 lbs. (104.3kg)
Construction
Material Durable Aluminum Construction
(3003 H-14 ALUM)
Hardware Stainless Steel Hardware
Finish Polyethylene Powder Coat
Security 3-Point Latching System
General Specifications
Dimensions 17” W x 1.75” H x 14.84” D
Weight 14 lbs. (6.35kg)
Construction
Material Durable Aluminum construction
(3003 H-14 ALUM)
Hardware Stainless Steel hardware
Finish Polyethylene powder coat
Customize internal SmartPed components to fit your broadband needs. Call Customer Service for more information. (440.366.6966)
Application
An above-ground housing to shelter amplifiers, splice
enclosures, nodes, and provide ample space for slack storage
in a secured environment.
B C
Fiber Node
DC or Line TAP
Front of Cabinet
Power Supply
Battery Storage
Back of Cabinet
Designed to house broadband power supplies, batteries, nodes, and fiber terminations in any
ground-mounted configuration. Options available allow for extremely flexible applications for
cable or fiber plants.
Patented ventilation design allows for increased exchange of air within the enclosure as compared to
traditional ventilation arrangements. Interior equipment and batteries operate in a significantly
cooler environment, thus increasing life spans.
May be used with pre-cast or poured-in-place concrete pads, vaults, or any other desired mounting
options.
Open bottom design accommodates all vault and pad installations, allowing flexibility of utility and
cable entrance locations.
Standard features include durable, all-aluminum construction with exterior finished in light
equipment gray powder coat paint. Custom colors are available upon request.
Battery slide trays lock in both closed and extended positions.
Front and rear doors are removable for ease of installation and service of enclosed equipment.
Doors are locked in the closed position with high-security latches.
Base Enclosure
Standard enclosure is gray powder coat
finish, optional colors are available. Please
call Customer Service for more information.
Enclosure includes brackets to hang nodes,
velcro straps to secure slack and drop in
doors with locks.
Base Enclosure
Standard enclosure is gray powder coat
finish, optional colors are available. Please
call Customer Service for more information.
Enclosure includes brackets to hang nodes,
velcro straps to secure slack and drop in
doors with locks.
Base Enclosure
Standard enclosure is gray powder coat
finish, optional colors are available. Please
call Customer Service for more information.
Enclosure includes brackets to hang nodes,
velcro straps & slack hooks to secure slack
and drop in doors with locks.
Please see options list and accessories page to specify components and other products you may need
Please see options list and accessories page to specify components and other products you may need
Please see options list and accessories page to specify components and other products you may need
Pedestals 48”
Part # Description UOM
744-172-P1 MQ30-PED48 Raises enclosure to a height of 48” Each
744-170-P1 MQ36-PED48 Raises enclosure to a height of 48” Each