Sie sind auf Seite 1von 2

Technical Description Doc.

Rev A/44782-K071 1 of 2
TECHNICAL
DESCRIPTION
MAIN CONTROL PROCESSOR(MCP)
Part Number 44782-K071
This printed circuit board is used for processing and interfacing of information within the control
panel. The circuit board uses a Hitachi H8 series processor, which is being continually
monitored for incorrect execution and for the breakdown of the supply voltages to the processor.
Site Programming information is held within the Flash Memory where as the Random Access
Memory (RAM) is used as temporary storage for information used by the system program held
within the EPROM. Communications to and from various peripheral interface devices are
carried out upon this circuit board. A peripheral board removal circuit exists which is used to
monitor for the disconnection of interface cards connected to the MCP. This board holds the
control panels internal buzzer, which is used to give an audible indication with respect to various
operations of the control panel.
The connection to the Liquid Crystal Display (LCD) part number 43782-K035 is taken from this
board, the LCD is used to display control panel information. This card is used to house the LCD
inverter PCB that is used to supply the LCD backlight. The inverter card is supplied with a 5-volt
supply, which is altered by the PCB to give an AC output to drive the backlight tube.
A connection socket exists which will allow authorised engineers to link the PC to permit
download of site specific information from the VIPER software program. To allow the download
of information from the VIPER program a communication lead, part number MT0021, is
required.
PROCESSOR INFORMATION
IC1. Processor - Hitachi H8 534.
IC8. Random Access Memory (RAM) - 128K x 8 (Typically HM628128).
IC10 & IC17. Flash Memory - 128K x 8 (ATMEL AT29C010).
IC9. Read Only Memory - 512k x 8 (Typically M27C4001).
SWITCH & LINK INFORMATION
SW1. Processor Reset Switch.
SW2. System Faults cancel switch.
SW3. NOT OPERATIONAL.
LK1. Installed.
Technical Description Doc. Rev A/44782-K071 2 of 2
PLUG & SOCKET INFORMATION
PLG1. 20-way connection to 8 lines Liquid Crystal Display (LCD).
PLG2. 2 wire AC supply connection to LCD backlight tube.
PLG3. 20 way connection to parallel expansion port - TTL.
PLG4. 12 way connection to membrane switches.
PLG5. 14 way connection to MBLC (44782-K073) board.
PLG6. 16 way connection to panel printer - TTL.
PLG7. 10 way connection to Plant indicator PCB - TTL.
PLG8. 10 way connection to Status indicator PCB (44782-K072) - TTL.
PLG9. 28v, 0v & 5v connection to Status indicator PCB.
PLG10. 28v, 0v & 5v connection input from MBLC (44782-K073).
SKT1. 5 way DIN connection from a PC via MT0021 - RS232.
MISCELLANEOUS INFORMATION
R2. Variable potentiometer used to adjust the contrast/viewing angle of the
LCD.
BZ1. Internal Buzzer - 70 dB at 1M.

Das könnte Ihnen auch gefallen