Sie sind auf Seite 1von 45

CEILING DIFFUSERS CONTENTS

CONTENTS
DA Directional Ceiling Diffuser
DG Double Deflection Ceiling Diffuser
DP Plate Type Ceiling Diffuser
DF Modular Core Directional Diffuser
CA Round Diffuser
CA-A-C Round Diffuser
CAC Ceiling Diffuser
CP Plate Type Round Diffuser
PD & PDC Perforated Face Diffuser
SW-2T Swirl Diffuser
SW-3T Curve-blade Swirl Diffuser
SLLS Linear Ceiling Diffuser
LTD Light Troffer Diffuser
Ceiling Diffusers Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.

CEILING DIFFUSERS
DA Directional Ceiling Diffuser
Materials

DA-A: 1.0mm extruded aluminum.


DA-T: 0.7mm galvanized steel.

Surface Finish

DA-T: white powder coated, oven baked as standard.


DA-S: stainless steel original color.
DA-A: white powder coat oven baked or natural anodized.

Features

Frame for DA is flush.


DA diffuser can be made square or rectangular.
The direction of air flow can be 1-way, 2-way, 3-way or 4-way.

Accessories

G1 Opposed blade damper.


C1 Radial fan blade damper.
D2 Square to round adapter.
C2 Crown damper.

Standard Sizes

Comply to requirements for both square & rectangular diffuser.

DA Construction Illustrations

DA Physical Dimension Unit:mm


Model

C
Neck Size

DA-T
DA-S

WxH

DA-A

WxH

A
Duct Size
W + 10
H + 10
W + 10
H + 10

B
Ceiling Size
W + 110
H + 110
W + 75
H + 75

D
Face Size
W + 123
H + 123
595 x 595
603 x 603

H
Height
65
50

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DA page 1 of 4

CEILING DIFFUSERS
DA Directional Ceiling Diffuser
DA + G1 Opposed Blade Damper (OBD)

The G1 opposed blade damper is designed for even distribution of air over the
entire face of diffuser. It is gear operated & can be adjusted from below by
means of key or screw driver. The damper can be set at fully open,
half open & fully close.
G1 damper are constructed of galvanized steel with matt black as standard finish.
Height for G1-T 50mm.

DA + C1 Radial Fan Blade Damper

The C1 radial fan blade damper is a volume control adjustable from below by
means of key or screw driver.
Mould pressed, 0.6mm thick galvanized steel with matt black as standard finish.
Height for C1-T 60mm.

DA + D2 Square to Round Adapter c/w


Radial Fan Blade Damper

With D2 square to round adapter fitted to the DA, it will enable easy installation
of flexible duct.
The D2 adapter are constructed of 0.6mm galvanized steel with matt black as
standard finish and optional with or without damper.

DA + C2 Crown Damper

Model DA has a removable core for easy adjustable of OBD volume damper.
The removable core is hooked to the inner frame a spring-loaded clip.
Neck sizes above 450mm will not have a removable core.

C2 Crown Damper
Adapter

C2 crown damper provides maximum free area and uniform air distribution.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DA page 2 of 4

CEILING DIFFUSERS
DA Directional Ceiling Diffuser
DA Product Specification Unit:mm
Model Code
DA-T

Materials
0.7 SPGC Steel

Surface Finish
White Powder Coat,
Oven Baked

DA-S

0.5 Stainless Steel


SUS. 304

Original Colour

DA-A

Extruded Aluminium
A6063

White Powder Coat,


Oven Baked or Natural Anodized

Standard Sizes
150 X 150
200 X 200
250 X 250
300 X 300
350 X 350
400 X 400
450 X 450
500 X 500
550 X 550
600 X 600

Accessories

Order Key
DA - T + C1 - 150 x 150

G1 Opposed
Blade Damper
D2 Square to
Round Damper

Accessories

C1 Radial Fan Blade

Materials
C2 Crown Damper

Model

DA Performance Data (Square Inlet)


Neck Size (mm)
Neck Area (m2)
150 x 150
(0.023)

200 x 200
(0.04)

250 x 250
(0.0625)

300 x 300
(0.09)

350 x 350
(0.1225)

Neck Vel. (m/s)

1.5

2.0

2.5

3.0

3.5

4.0

CMH
Total Press (mmAq)
Throw (m)
NC
CMH
Total Press (mmAq)
Throw (m)
NC
CMH
Total Press (mmAq)
Throw (m)
NC
CMH
Total Press (mmAq)
Throw (m)
NC
CMH
Total Press (mmAq)
Throw (m)
NC

125
0.9
1.2 - 1.5
280
0.95
1.2 - 1.5
1.0
1.3 - 1.8
510
1.2
1.5 - 2.1
655
1.2
1.8 - 2.4
-

170
0.95
1.5 - 2.1
305
1.0
1.8 - 2.4
372
1.1
2.1 - 3.5
680
1.6
2.1 - 3.0
22
870
1.3
2.4 - 3.3
24

210
1.05
1.8 - 2.4
22
286
1.1
2.4 - 3.0
23
468
1.6
2.4 - 3.8
850
2.5
2.7 - 3.6
28
1090
2.1
3.3 - 4.2
30

255
1.5
2.4 - 3.3
28
460
1.5
2.7 - 3.6
28
560
2.4
3.0 - 4.5
26
1020
3.4
3.3 - 4.5
34
1305
2.9
3.9 - 5.1
36

300
2.1
3.0 - 3.9
33
534
2.1
3.3 - 4.5
33
650
3.2
3.2 - 4.8
31
1190
4.8
4.2 - 5.4
39
1520
4.1
5.1 - 6.3
41

340
2.6
3.3 - 4.5
41
610
2.6
4.2 - 5.4
42
745
4.1
3.5 - 5.1
36
1360
6.0
4.5 - 6.0
45
1740
5.3
5.7 - 7.2
50

Throw is based on terminal velocities of 0.5m/s-0.25m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance tables are based on steel construction. For performance with aluminium construction, the pressure loss is 1.15P, and add 2 for NC value.
Thickness of materials other than standard are available upon request.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DA page 3 of 4

CEILING DIFFUSERS
DA Directional Ceiling Diffuser
DA Performance Data (Round Inlet)
Neck Size (mm)
Neck Area (m2)
200
(0.0324)

250
(0.0507)

300
(0.0731)

350
(0.0979)

Neck Vel. (m/s)

2.5

3.5

4.5

CMH
Total Press (mmAq)
Throw (m)
NC
CMH
Total Press (mmAq)
Throw (m)
NC
CMH
Total Press (mmAq)
Throw (m)
NC
CMH
Total Press (mmAq)
Throw (m)
NC

233
1.0
1.5 - 2.6
365
1.1
2.1 - 3.5
526
1.6
2.5 - 4.2
705
1.3
2.7 - 5.2
-

292
1.1
2.1 - 3.2
456
1.6
2.4 - 3.8
658
2.5
3.0 - 4.8
22
881
2.1
3.6 - 5.7
22

350
1.5
2.4 - 3.5
548
2.4
3.0 - 4.5
22
790
3.4
3.6 - 5.4
26
1057
2.9
42 - 6.2
25

408
2.1
2.6 - 3.8
22
640
3.2
3.2 - 4.8
26
920
4.8
4.3 - 5.7
30
1234
4.1
4.9 - 6.9
31

467
2.6
2.7 - 4.2
25
730
4.1
3.5 - 5.1
30
1052
6.0
4.3 - 6.4
33
1410
5.3
5.2 - 7.2
34

525
3.4
3.0 - 4.3
28
820
5.3
4.0 - 5.4
32
1185
7.6
4.6 - 6.7
36
1585
6.7
5.4 - 7.7
37

583
4.2
3.1 - 4.4
31
913
6.5
4.1 - 5.7
35
1315
8.7
5.2 - 7.2
40
1762
7.9
5.5 - 8.5
41

Throw is based on terminal velocities of 0.5m/s-0.25m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance tables are based on steel construction. For performance with aluminium construction, the pressure loss is 1.15P, and add 2 for NC value.

DA Performance Data (Rectangular)


Face Size
(mm x mm)

1200 x 600

Neck Vel. (m/s)


Vel. Press. (mmAq)
Tot. Press. (mmAq)
CMH
NC
Throw
1200mm side
600mm side
(m)

1.5

2.0

2.5

3.0

3.5

4.0

4.5

0.1
1.0
2774
10.7 - 15.4
7.3 - 11.9

0.2
1.9
3699
26
12.4 - 17.6
9.8 - 13.7

0.4
2.9
4624
32
13.9 - 19.8
10.7 - 15.4

0.5
4.2
5548
37
15.4 - 21.7
11.9 - 16.8

0.8
5.7
6473
41
16.6 - 23.4
12.7 - 18.0

1.0
7.5
7398
44
17.6 - 24.9
13.7 - 19.3

1.2
9.4
8322
47
18.8 - 26.3
14.4 - 20.5

Throw is based on terminal velocities of 0.5m/s-0.25m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance tables are based on steel construction. For performance with aluminium construction, the pressure loss is 1.15P, and add 2 for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DA page 4 of 4

CEILING DIFFUSERS
DG Double Deflection Ceiling Diffuser
Materials

DG-T: 0.6mm SPGC galvanized steel.

Surface Finish

White powder coated, oven baked as standard.

Features

The diffuser core in the center is made of double deflection blade, which
enables more air distribution in the perpendicular direction. It is suitable for
high ceiling installation.

Accessories

G1 Opposed blade damper.


C1 Radial fan blade damper.
C2 Crown damper.

Standard Sizes

Comply to requirements for both square & rectangular diffuser.

DG Construction Illustrations

DG Physical Dimension Unit:mm


C - Neck Size
200 x 200
250 x 250
285 x 285
365 x 365
480 x 480

A - Duct Size
210 x 210
260 x 260
295 x 295
375 x 375
485 x 485

B - Ceiling Size

D - Face Size

370 x 370

410 x 410

450 x 450
555 x 555

490 x 490
603 x 603

H - Height

89

DG Product Specification Unit:mm


Model

DG-T

Materials

Surface Finish

Standard Sizes

0.6 SPGC Steel

White Powder Coat,


Oven Baked

200 x 200
250 x 250
285 x 285
365 x 365

Accessories
G1 Opposed
Blade Damper
C1 Radial
Fan Blade Damper
C2 Crown Damper

Order Key
DG - T + C1 - 250

Materials
Model

Neck Size

Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DG page 1 of 2

CEILING DIFFUSERS
DG Double Deflection Ceiling Diffuser
DG + G1 Opposed Blade Damper

The G1 OBD damper is designed for even distribution of air over the entire face
of diffuser. It is gear operated & can be adjusted from below by means of key
or screw driver. The damper can be set at fully open, half open & fully close.
G1 damper are constructed of galvanized steel with matt black as standard finish.
Height for G1-T 50mm.

DG + C1 Radial Fan Blade Damper

With C1 radial fan blade damper fitted to the DG diffuser, it will enable easy
installation of flexible duct.
The C1 are constructed of 0.6mm galvanized steel with matt black as
standard finish.
Air balancing can be done by adjusting the damper.
Height for C1-T 60mm.

DG Performance Data (Square Inlet)


Neck Size
mm
Neck Area m2
200 x 200
(0.04)

250 x 250
(0.0625)

285 x 285
(0.081)

365 x 365
(0.133)

480 x 480
(0.225)

Neck Vel. (m/s)


Total Press
22
45
(mmAq)
CMH
Throw
22
45
(m)
NC
CMH
Throw
22
45
(m)
NC
CMH
Throw
22
45
(m)
NC
CMH
Throw
22
45
(m)
NC
CMH
Throw
22
45
(m)
NC

2
0.8
1.1
288
2.6 - 4.5
1.6 - 2.7
450
3.3 - 5.4
2.1 - 3.4
583
40 - 6.9
2.6 - 4.2
957
4.5 - 8.0
2.9 - 5.0
1620
7.9 - 13.5
4.8 - 8.2
-

2.5
1.4
2.0
360
3.3 - 5.0
2.2 - 3.1
563
3.9 - 6.2
2.6 - 3.9
729
4.9 - 7.7
3.2 - 4.7
1197
5.6 - 9.0
3.6 - 5.5
2025
9.6 - 15.2
6.0 - 9.4
22

3
1.9
2.5
432
3.9 - 5.6
2.4 - 3.4
675
4.7 - 6.7
3.0 - 4.2
21
875
6.0 - 8.4
3.8 - 5.3
23
1436
7.0 - 9.7
4.3 - 6.0
24
2430
11.4 - 16.4
7.2 - 10.3
26

3.5
2.4
3.8
504
4.3 - 6.1
2.7 - 3.7
24
788
5.4 - 7.4
3.3 - 4.6
26
1020
6.6 - 9.0
4.1 - 5.7
27
1675
7.5 - 10.6
4.7 - 6.6
29
2835
12.7 - 17.8
7.9 - 11.0
31

4
3.2
5.0
576
4.6 - 6.6
3.0 - 4.0
28
900
5.7 - 7.8
3.5 - 5.0
29
1166
7.0 - 9.8
4.4 - 6.1
32
1915
8.0 - 11.2
5.0 - 6.9
33
3240
13.8 - 19.2
8.4 - 11.9
36

4.5
4.2
6.4
648
5.0 - 7.0
3.1 - 4.2
30
1013
6.1 - 8.3
3.8 - 5.3
32
1312
7.4 - 10.3
4.6 - 6.4
35
2154
8.6 - 11.8
5.3 - 7.4
36
3645
14.7 - 20.3
9.0 - 12.9
39

5
5.1
7.8
720
5.1 - 7.2
3.3 - 4.5
33
1125
6.5 - 9.0
4.0 - 5.5
37
1458
7.8 - 10.9
5.0 - 6.6
39
2394
9.0 - 12.5
5.5 - 7.8
40
4050
15.6 - -21.2
9.5 - 13.5
41

Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
With C1 damper, the pressure loss is 1.136P. And add 2 for for NC value.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DG page 2 of 2

CEILING DIFFUSERS
DP Plate Type Ceiling Diffuser
Materials

DP-T: 0.6mm SPGC galvanized steel.

Surface Finish

White powder coat, oven baked as standard.

Features

The diffuser core for the DP supply air diffuser is in the form of a plate which
will enable an even spread of air distribution.

Accessories

G1 Opposed blade damper.


C1 Radial fan blade damper.
C2 Crown damper.

Standard Sizes

DP-Round neck: 200, 250, 300(mm).


DP-Square neck: 200, 250, 300 (mm).

DP Construction Illustrations

DP Physical Dimension Unit:mm


C - Neck Size
200
250
300
200 x 200
250 x 250
300 x 300

A - Duct Size
210
260
310
210 x 210
260 x 260
310 x 310

B - Ceiling Size

D - Face Size

H - Height

560 x 560

595 x 595
603 x 603

79

450 x 450

61

410 x 410

DP Product Specification Unit:mm


Model

DP-T

Materials

0.6 SPGC Steel

Surface Finish

White Powder Coat,


Oven Baked

Standard Sizes
Round Neck
200-300
Square Neck
200-300

Accessories
C1 Radial
Fan Blade Damper
G1 Opposed
Blade Damper
C2 Crown Damper

Order Key
DP - T + C1 - 250

Materials
Model

Neck Size

Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DP page 1 of 2

CEILING DIFFUSERS
DP Plate Type Ceiling Diffuser
DP (Square Neck) + G1 Opposed Blade Damper

The G1 OBD damper is designed for even distribution of air over the entire face
of diffuser. It is gear operated & can be adjusted from below by means of key
or screw driver. The damper can be set at fully open, half open & fully close.
G1 damper are constructed of galvanized steel with matt black as standard finish.
Height for G1-T 50mm.

DP (Round Neck) + C1 Radial Fan Blade Damper

The C1 radial fan blade damper is a volume control adjustable from below by
means of key or screw driver.
Mould pressed, 0.6mm thick galvanized steel.
Height for C1-T 60mm.

DP Performance Data
Neck Size mm
Neck Area m2
200 x 200
(0.04)

250 x 250
(0.0625)

300 x 300
(0.09)

200
(0.0324)

250
(0.0507)

300
(0.0731)

Neck Vel. (m/s)

2.5

3.5

4.5

CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC

288
0.8
0.9 - 1.8
450
1.2
1.5 - 2.8
648
1.6
2.0 - 3.8
233
0.6
0.7 - 1.5
365
0.9
1.2 - 2.3
526
1.3
1.6 - 3.1
-

360
1.2
1.6 - 2.0
563
1.6
1.9 - 3.5
810
2.3
2.6 - 4.3
292
0.9
1.3 - 1.6
456
1.3
1.5 - 2.8
658
1.8
2.1 - 3.5
-

432
1.4
1.7 - 2.3
675
2.0
2.1 - 3.8
972
3.0
3.0 - 4.8
22
350
1.1
1.4 - 1.8
548
1.6
1.7 - 3.0
790
2.4
2.4 - 3.9
-

504
1.9
1.9 - 2.7
788
2.8
2.4 - 4.1
22
1134
4.0
3.3 - 5.0
25
408
1.5
1.5 - 2.2
640
2.2
1.9 - 3.3
920
3.2
2.7 - 4.8
22

576
2.4
2.2 - 3.4
22
900
3.6
3.0 - 4.3
26
1296
5.1
4.0 - 6.4
30
467
1.9
1.8 - 2.5
430
2.9
2.4 - 3.5
22
1052
4.2
3.2 - 5.2
26

648
3.0
2.4 - 3.4
26
1013
4.6
3.0 - 5.0
32
1458
6.4
4.3 - 7.0
34
525
2.4
1.9 - 2.8
22
820
3.8
2.5 - 4.1
26
1185
5.2
3.6 - 5.8
30

720
3.8
2.7 - 4.0
30
1125
5.8
3.3 - 5.2
35
1620
8.0
5.1 - 7.2
38
583
3.0
2.2 - 3.2
25
913
4.7
2.7 - 4.3
30
1315
6.4
4.2 - 6.0
33

Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DP page 2 of 2

CEILING DIFFUSERS
DF Modular Core Directional Diffuser
Description

ASLI DF modular core directional diffusers are designed to supply large volume of
air at low sound levels and pressure drops. Field adjustment of the air pattern is
fast and easy by repositioning the curved modular pattern controllers to suit the
desired application.

Materials

Frame: Galvanized steel.


Blade: Galvanized steel.

Surface Finish

Baked white powder coated as standard.

Features

Economical.
Long throw capability.
High air flow capability.
Suitable for exposed ductwork or surface mounted.
Suitable for ceiling.
Curved blade air pattern modules can be repositioned in the field simply and
quickly without using any tools.
1, 2, 3 and 4-way throw model available.
Optional removable air pattern modules.

Accessories

Opposed Blade Damper (G1).

DF Construction Illustrations

Top View

Section View

DF Physical Dimension Unit:mm


N = Neck Size
N

F = Face Size
N + 60

H = Height
48

D*
14

* when blades are fully opened.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DF page 1 of 3

CEILING DIFFUSERS
DF Modular Core Directional Diffuser
DF Air Flow Performance Data
Neck Size
(mm x mm)

150 X 150

200 X200

250 X 250

300 X 300

350 X 350

400 X 400

450 X450

500 X 500

Neck Vel. (m/s)


Vel. Press (mmAq)
Tot. Press (mmAq)
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way

1.5
0.2
1.0
128
0.9 - 2.1
1.2 - 3.0
1.2 - 3.0
1.8 - 4.3
226
1.5 - 2.7
2.1 - 4.0
2.1 - 4.0
3.0 - 5.5
354
1.5 - 3.0
1.8 - 4.3
1.8 - 4.3
2.7 - 6.1
510
2.4 - 4.3
3.4 - 5.8
3.4 - 5.8
4.9 - 8.2
694
2.7 - 4.9
4.0 - 6.7
4.0 - 6.7
5.8 - 9.8
906
3.4 - 5.5
4.6 - 7.6
4.6 - 7.6
6.4 - 11.0
1148
3.7 - 6.1
5.2 - 8.8
5.2 - 8.8
7.3 - 12.5
1416
3.7 - 7.0
5.8 - 9.8
5.8 - 9.8
7.9 - 13.7

2
0.3
1.7
170
1.8 - 2.4
2.4 - 3.4
2.4 - 3.4
3.4 - 4.9
303
2.1 - 3.0
3.0 - 4.6
3.0 - 4.6
4.6 - 6.4
473
2.1 - 3.7
3.0 - 4.9
3.0 - 4.9
4.6 - 7.0
680
3.4 - 4.9
4.6 - 6.
4.6 - 6.
6.7 - 9.4
925
20
4.0 - 5.5
5.5 - 7.9
5.5 - 7.9
7.6 - 11.3
1209
21
4.3 - 6.4
6.1 - 8.8
6.1 - 8.8
6.1 - 12.8
1530
21
4.9 - 7.3
6.7 - 10.1
6.7 - 10.1
9.8 - 14.3
1889
22
5.5 - 7.9
7.6 - 11.3
7.6 - 11.3
10.7 - 15.8

Throw is based on terminal velocity of 0.5m/s and 0.25m/s respectively.


Throw is based on isothermal condition.

2.5
0.4
2.7
213
21
1.8 - 2.7
2.7 - 3.7
2.7 - 3.7
3.7 - 5.5
377
22
2.4 - 3.7
3.7 - 4.9
3.7 - 4.9
5.2 - 7.0
590
24
2.7 - 4.0
4.0 - 5.5
4.0 - 5.5
5.5 - 7.9
850
25
3.7 - 5.5
5.2 - 7.6
5.2 - 7.6
7.6 - 10.7
1158
26
4.3 - 6.1
6.1 - 8.8
6.1 - 8.8
8.8 - 12.5
1511
27
5.2 - 7.0
7.0 - 10.1
7.0 - 10.1
10.1 - 14.3
1913
27
5.8 - 7.9
7.9 - 11.3
7.9 - 11.3
11.3 - 16.2
2361
28
6.4 - 8.8
8.8 - 12.5
8.8 - 12.5
12.5 - 17.7

3
0.6
3.7
255
26
2.1 - 3.0
3.0 - 4.3
3.0 - 4.3
4.3 - 5.8
456
27
2.7 - 4.0
4.0 - 5.5
4.0 - 5.5
5.5 - 7.9
707
29
3.0 - 4.3
4.3 - 6.1
4.3 - 6.1
6.1 - 8.8
1020
30
4.3 - 5.8
5.8 - 8.2
5.8 - 8.2
8.2 - 11.6
1389
31
4.9 - 6.7
6.7 - 9.4
6.7 - 9.4
9.8 - 13.7
1814
32
5.5 - 7.9
7.6 - 11.0
7.6 - 11.0
11.0 - 15.5
2295
32
6.1 - 8.8
8.8 - 12.2
8.8 - 12.2
12.5 - 17.7
2834
33
7.0 - 9.8
9.8 - 13.7
9.8 - 13.7
13.7 - 19.5

3.5
0.8
5.2
298
30
2.1 - 3.0
3.0 - 4.6
3.0 - 4.6
3.7 - 6.4
529
31
3.0 - 4.3
4.3 - 5.8
4.3 - 5.8
6.1 - 8.5
826
33
3.4 - 4.9
4.6 - 6.7
4.6 - 6.7
6.7 - 9.4
1190
34
4.6 - 6.4
6.4 - 8.8
6.4 - 8.8
8.8 - 12.8
1620
35
5.2 - 7.3
7.3 - 10.4
7.3 - 10.4
10.4 - 14.6
2117
36
6.1 - 8.5
8.2 - 11.9
8.2 - 11.9
11.9 - 16.8
2678
37
6.7 - 9.4
9.4 - 13.4
9.4 - 13.4
13.4 - 18.9
3307
37
7.0 - 10.7
10.4 - 14.6
10.4 - 14.6
14.9 - 21.0

4
1.0
6.7
340
33
2.4 - 3.4
3.4 - 4.9
3.4 - 4.9
4.9 - 6.7
604
35
3.0 - 4.6
4.9 - 6.7
4.9 - 6.7
6.7 - 9.4
944
36
3.7 - 5.2
4.9 - 7.0
4.9 - 7.0
7.0 - 10.1
1360
38
4.9 - 6.7
6.7 - 9.4
6.7 - 9.4
9.4 - 13.4
1851
39
5.5 - 7.9
7.9 - 11.0
7.9 - 11.0
11.3 - 15.8
2417
39
6.4 - 9.1
8.8 - 12.5
8.8 - 12.5
12.8 - 18.0
3060
40
7.3 - 10.1
10.1 - 14.3
10.1 - 14.3
14.3 - 20.4
3777
41
7.9 - 11.3
11.3 - 15.8
11.3 - 15.8
15.8 - 22.6

4.5
1.3
8.4
383
36
2.4 - 3.7
3.7 - 5.2
3.7 - 5.2
5.2 - 7.3
680
38
3.4 - 4.9
4.9 - 6.7
4.9 - 6.7
6.7 - 9.4
1063
40
3.7 - 5.5
5.2 - 7.6
5.2 - 7.6
7.6 - 10.7
1530
41
5.2 - 7.3
7.0 - 10.1
7.0 - 10.1
10.1 - 14.3
2083
42
5.8 - 8.2
8.2 - 11.6
8.2 - 11.6
11.9 - 16.8
2720
43
6.7 - 9.4
9.4 - 13.4
9.4 - 13.4
13.4 - 19.2
3443
43
7.6 - 10.7
10.7 - `4.9
10.7 - `4.9
15.2 - 21.6
4250
44
8.5 - 11.9
11.9 - 16.8
11.9 - 16.8
16.8 - 23.8

5
1.6
10.4
425
39
2.7 - 3.7
3.7 - 5.2
3.7 - 5.2
5.5 - 7.6
755
41
3.7 - 5.2
4.9 - 7.0
4.9 - 7.0
7.0 - 10.1
1180
42
4.0 - 5.8
5.5 - 7.9
5.5 - 7.9
7.9 - 11.3
1700
44
5.5 - 7.6
7.6 - 10.7
7.6 - 10.7
10.7 - 15.2
2314
45
6.1 - 8.8
8.8 - 12.5
8.8 - 12.5
12.5 - 17.7
3023
45
7.0 - 10.1
10.1 - 14.0
10.1 - 14.0
14.3 - 20.1
3825
48
7.9 - 11.3
11.3 - 15.8
11.3 - 15.8
16.2 - 22.6
4723
47
8.8 - 12.5
12.5 - 17.7
12.5 - 17.7
17.7 - 25.3

NC value is based on room absorption of 10dB, re 10-12 watts.


Dash (-) in space indicates NC value less than 20.
The performance data is tested in pattern controllers fully opened at 45.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DF page 2 of 3

CEILING DIFFUSERS
DF Modular Core Directional Diffuser
DF Air Flow Performance Data
Neck Size
(mm x mm)

550 X 550

600 X 600

Neck Vel. (m/s)


Vel. Press (mmAq)
Tot. Press (mmAq)
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way
CMH
NC
4 Way
Throw
3 Way
(m)
2 Way
1 Way

1.5
0.2
1.0
1714
4.6 - 7.6
6.1 - 10.7
6.1 - 10.7
8.8 - 15.2
2040
4.9 - 8.2
6.7 - 11.6
6.7 - 11.6
9.8 - 16.5

2
0.3
1.7
2285
23
5.8 - 8.8
8.2 - 12.2
8.2 - 12.2
11.9 - 17.7
2720
23
6.4 - 9.4
8.8 - 13.4
8.8 - 13.4
12.8 - 19.2

2.5
0.4
2.7
2858
29
7.0 - 9.8
9.8 - 13.7
9.8 - 13.7
13.7 - 19.5
3400
29
7.6 - 10.7
10.7 - 14.9
10.7 - 14.9
15.2 - 21.3

Throw is based on terminal velocity of 0.5m/s and 0.25m/s respectively.


Throw is based on isothermal condition.

3
0.6
3.7
3429
34
7.6 - 10.7
10.7 - 14.9
10.7 - 14.9
15.2 - 21.3
4080
34
8.2 - 11.6
11.6 - 16.5
11.6 - 16.5
16.5 - 23.5

3.5
0.8
5.2
4000
38
8.2 - 11.6
11.6 - 16.2
11.6 - 16.2
16.5 - 23.2
4760
38
8.8 - 12.8
12.5 - 17.7
12.5 - 17.7
18.0 - 25.3

4
1.0
6.7
4571
41
8.8 - 12.5
12.2 - 17.4
12.2 - 17.4
17.7 - 24.7
5440
42
9.4 - 13.4
13.4 - 18.9
13.4 - 18.9
19.2 - 27.1

4.5
1.3
8.4
6673
45
9.4 - 13.1
13.1 - 18.3
13.1 - 18.3
18.6 - 26.2
6120
45
10.1 - 14.3
14.3 - 20.1
14.3 - 20.1
20.4 - 28.7

5
1.6
10.4
5714
47
9.8 - 13.7
13.7 - 19.5
13.7 - 19.5
19.5 - 27.7
6800
48
10.7 - 15.2
14.9 - 21.0
14.9 - 21.0
21.3 - 30.2

NC value is based on room absorption of 10dB, re 10-12 watts.


Dash (-) in space indicates NC value less than 20.
The performance data is tested in pattern controllers fully opened at 45.

Available Air Pattern Setting

4-Way DF

3-Way DF

2-Way DF

1-Way DF

DF Suggested Specification

Type DF modular core directional diffuser shall consists of an outer frame and modular core with curved blade profile pattern controllers. The pattern
controllers shall be adjustable from the diffuser face without using any tools for one, two, three or four way discharge. The diffuser shall have a collar as an
integral part of the frame assembly which allows connection to the square duct. The diffuser shall be epoxy coated and furnished to architectural
requirement.

DF Order Code
Model
DF

Material
A (Aluminum), T (Galvanized Steel)

Neck Size (mm)


Custom

Accessories
G1

Example: DF-T-N500mmX500mm-G1
All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
DF page 3 of 3

CEILING DIFFUSERS
CA Round Diffuser
Materials

CA-A: 0.8mm aluminium sheet roll formed.


CA-P: injection moulded ABS plastic.
CA-T: 0.6mm steel galvanized steel.

Surface Finish

CA-A: white powder coat, oven baked or natural anodized.


CA-P: white color.
CA-T: white powder coat.

Features

Model CA is removable multi-cones diffuser with two angles of deflection,


it has a removable centre core.

Accessories

C1 Radial fan blade damper.


C2 Crown damper.

Standard Sizes

CA-A: 150 - 600(mm)

CA Construction Illustrations

CA Physical Dimension Unit:mm


Model
150
200
250
300
350
400
450
500
550
600

C - Neck Size
150
203
254
305
355
406
450
500
550
600

A - Duct Size
155
205
258
308
358
410
453
503
553
603

B - Ceiling Size
240
295
335
385
445
500
575
625
675
730

D - Face Size
255
305
355
407
457
562
655
705
745
805

H - Height
82
95
103
112
114
119
120
123
128
130

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CA page 1 of 2

CEILING DIFFUSERS
CA Round Diffuser
CA Product Specification Unit:mm
Model

Materials

Surface Finish
White Power Coat, Oven
Baked or Natural Anodized

Standard Sizes

Accessories

CA-A

0.8 Aluminium Sheet


ABS Plastic

White Colour

150-600

C1 Radial
Fan Blade Damper
150-350

CA-P
CA-T

0.6mm Galvanized Steel

White Powder Coated

C2 Crown Damper

Order Key
CA - A + C1 - 250

Materials
Neck Size
Model
Accessories

CA Performance Data
Neck Size mm
Neck Area m2
150
(0.0182)

200
(0.0324)

250
(0.0507)

300
(0.0731)

350
(0.0979)

400
(0.1297)

450
(0.1642)

500
(0.2027)

550
(0.2452)

600
(0.2919)

Neck Vel. (m/s)

CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC
CMH
Tot. Press(mmAq)
Radius of Diff(M)
NC

130
0.8
0.5 - 0.8
233
1.0
0.8 - 1.1
365
1.0
0.8 - 1.4
526
1.1
1.0 - 2.0
705
0.9
1.3 - 2.2
934
0.8
1.4 - 2.6
1182
0.8
1.6 -2.8
1460
0.9
1.9 - 3.2
1765
1.1
2.0 - 3.5
2100
1.0
2.2 - 3.8
21

196
1.5
0.8 - 1.4
350
2.0
1.1 - 2.0
22
548
2.1
1.4 - 2.3
23
790
2.2
1.7 - 2.9
23
1057
2.0
2.0 - 3.2
24
1400
1.5
2.2 - 3.7
24
1773
1.5
2.5 - 41.3
25
2190
2.0
2.8 - 4.6
25
2648
2.2
3.2 - 5.0
26
3152
1.7
3.5 - 5.5
26

262
2.3
1.1 - 2.0
25
467
2.5
1.4 - 2.6
27
730
2.5
2.2 - 3.2
28
1052
2.8
2.3 - 3.8
29
1410
2.9
2.6 - 4.3
29
1868
2.4
3.1 - 5.0
31
2365
2.3
3.5 - 5.8
32
2920
2.9
4.1 - 6.4
33
3530
.2.8
4.3 - 7.0
33
4203
2.3
4.7 - 7.5
34

328
3.6
1.4 - 2.3
32
583
3.9
2.0 - 3.2
34
913
4.1
2.3 - 4.1
35
1315
4.4
2.9 - 4.7
37
1762
4.4
3.5 - 5.5
38
2335
3.6
4.1 - 6.5
40
2955
3.6
4.3 - 7.0
42
3650
4.4
5.0 - 7.8
42
4415
4.4
5.4 - 8.6
44
5255
3.9
5.8 - 9.4
44

393
5.1
1.7 - 2.9
38
700
5.6
2.2 - 3.8
40
1095
5.8
2.8 - 4.7
41
1580
6.4
3.5 - 5.6
43
2115
6.5
4.1 - 6.5
43
2800
5.2
4.6 - 7.6
44
3546
5.1
6.2 - 8.5
46
4380
6.5
5.5 - 9.4
47
5295
6.4
6.3 - 10.4
48
6305
5.6
7.0 - 11.5
48

460
6.9
2.0 - 3.2
43
816
7.7
2.6 - 4.3
44
1280
8.2
3.5 - 5.5
45
1842
8.7
4.1 - 6.8
46
2467
8.5
4.7 - 7.6
47
3270
6.9
5.5 - 8.6
47
4140
6.9
6.1 - 9.8
50
5110
8.5
7.0 - 11.1
52
6180
8.7
7.6 - 12.2
52
7355
7.7
8.2 - 13.1
53

525
9.1
2.4 - 3.8
45
933
10.2
3.2 - 5.0
47
1460
10.7
3.8 - 6.5
48
2105
11.2
4.7 - 7.6
50
2820
11.5
5.5 - 8.7
52
3735
9.1
6.4 - 10.2
52
4730
9.1
7.0 - 11.4
54
5840
11.5
8.5 - 12.5
56
7060
11.2
8.8 - 14.0
56
8405
10.2
9.4 - 15.2
57

Radius of diffusion based on terminal velocities of 0.5 m/s-0.25 m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CA page 2 of 2

CEILING DIFFUSERS
CA-A-C Round Diffuser
Materials

CA-A-C: 0.8mm aluminium sheet roll formed.

Surface Finish

CA-A-C: white powder coat, oven baked or natural anodized.

Features

Model CA is removable multi-cones diffuser with two angles of deflection,


it has a removable centre core.

Accessories

C1 Radial fan blade damper.


C2 Crown damper.

Standard Sizes

CA-A-C: 150-300(mm)

CA-A-C Construction Illustrations

CA-A-C Physical Dimension Unit:mm


Model
150
200
250
300

A
340
440
520
610

B
35
40
40
45

D
147
197
247
297

H
125
135
145
145

K
80
80
80
80

T
15
20
20
23

CA-A-C Product Specification Unit:mm


Model

CA-A-C

Materials

0.8 Aluminium Sheet

Surface Finish
White Power Coat,
Oven Baked or
Natural Anodized

Standard Sizes

Accessories

150 - 300

C1 Radial
Fan Blade Damper
150 - 300
C2 Crown Damper

Order Key
CA - A + C1 - 250
Materials
Model

Neck Size

Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CA-A-C page 1 of 2

CEILING DIFFUSERS
CA-A-C Round Diffuser
CA-A-C Performance Data
Neck Size mm
Neck Area m2

152
(0.0181)

Neck Vel. (m/s)


CMH
Tot. Press
(mmAq)
Radius of Diff
(M)
NC

202
(0.0320)

CMH
Tot. Press
(mmAq)
Radius of Diff
(M)
NC

252
(0.0499)

CMH
Tot. Press
(mmAq)
Radius of Diff
(M)
NC

302
(0.0716)

CMH
Tot. Press
(mmAq)
Radius of Diff
(M)
NC

H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V

2.5

3.5

4.5

131
0.2
0.5
0.6
1.1
231
0.2
0.5
0.9
1.3
359
0.2
0.5
1
1.6
515
0.2
0.5
1.2
2
-

163
0.3
0.8
0.7
1.4
288
0.3
0.8
1
1.6
448
0.3
0.8
1.2
2.1
644
0.3
0.8
1.4
2.5
-

196
0.5
1.2
0.8
1.7
21
346
0.5
1.2
1.2
2
21
23
538
0.5
1.2
1.4
2.5
23
25
773
0.5
1.2
1.6
3
24
27

228
0.7
1.6
0.9
2
26
26
403
0.7
1.6
1.3
2.3
27
29
628
0.7
1.6
1.5
3
29
30
902
0.7
1.6
1.8
3.6
29
32

261
0.9
2
1
2.3
30
30
461
0.9
2
1.4
2.7
31
33
718
0.9
2
1.7
3.4
33
34
1031
0.9
2
2
4.1
33
36

294
1.1
2.6
1.1
2.7
34
34
519
1.1
2.6
1.5
3
35
36
807
1.1
2.6
1.8
3.8
36
38
1159
1.1
2.6
2.1
4.6
37
39

326
1.4
3.2
1.2
3
36
36
576
1.4
3.2
1.7
3.4
38
40
897
1.4
3.2
2
4.3
39
40
1288
1.4
3.2
2.3
5.2
39
42

392
2.1
4.6
1.3
3.6
40
42
692
2.1
4.6
1.9
4.1
43
45
1076
2.1
4.6
2.2
5.1
43
46
1546
2.1
4.6
2.6
6.2
44
47

Radius of diffusion based on terminal velocities of 0.5 m/s-0.25 m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CA-A-C page 2 of 2

CEILING DIFFUSERS
CAC Ceiling Diffuser
Materials

CAC-T: 0.6mm SPGC galvanized steel, mould pressed.


CAC-P: injection moulded ABS Plastic.

Surface Finish

Baked white powder coat as standard.


CAC-P: white colour.

Features

Face size is 603mm X 603mm designed for T-bar ceiling mounting.


Round diffuser: each diffusing cone is mould pressed, no welding joint.

Accessories

C1 Radial fan blade damper.


C2 Crown damper.

Patent No
574406

Standard Sizes

200, 250, 300, 350(mm)

CAC Construction Illustrations

CAC Physical Dimension Unit:mm


C - Neck Size
200
250
300
350

A - Duct Size
210
260
310
360

B - Diffusing Size
400

D - Face Size

H - Height

603 x 603

79

455

CAC Product Specification Unit:mm


Model

Materials

Surface Finish

CAC-T

0.6 SPGC Steel

Baked White Powder Coat

CAC-P

ABS Plastic

White

Standard Sizes
200
250
300
350

Accessories
C1 Radial Fan
Blade Damper
C2 Crown Damper

Order Key
CAC - T + C1 - 200
Materials
Neck Size
Model
Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CAC page 1 of 2

CEILING DIFFUSERS
CAC Ceiling Diffuser
CAC Round Neck

The CAC round neck diffuser is fixed to 2x2 ceiling to provice easy installation
to round outlet.

CAC + C1 Radial Fan Blade Damper

The C1 radial fan blade damper is a volume control adjustable from below by
means of key or screw driver.
Mould pressed, 0.6mm thick galvanized steel with matt blade as standard finish.
Height for CAC + C1 = 79mm.

CAC Performance Data


Neck Size mm
Neck Area m2
200
(0.0324)

250
(0.0507)

300
(0.0731)

350
(0.979)

Neck Vel. (m/s)

2.5

3.5

4.5

CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC

233
1.0
0.6 - 1.0
365
1.0
0.6 - -1.3
526
1.1
0.8 - 1.8
705
1.1
1.2 - 2.0
-

292
1.5
0.7 - 1.6
456
1.6
0.9 - 1.8
658
1.7
1.3 - 2.4
881
1.7
1.6 - 2.6
-

350
1.9
0.8 - 1.8
548
2.0
1.3 - 2.2
22
790
2.1
1.6 - 2.8
23
1057
2.1
1.8 - 3.1
23

408
2.2
1.0 - 2.2
22
640
2.2
1.6 - 2.6
26
920
2.3
1.9 - 3.3
28
1234
2.3
2.1 - 3.6
26

467
2.4
1.2 - 2.5
26
730
2.4
2.2 - 3.0
28
1052
2.6
2.3 - 3.6
29
1410
2.5
2.5 - 4.2
27

525
3.1
1.5 - 2.8
28
820
3.3
2.3 - 3.5
30
1158
3.5
2.5 - 4.1
32
1585
3.4
2.8 - 4.8
31

583
3.7
1.8 - 3.0
32
913
4.0
2.4 - 4.0
35
1315
4.2
2.8 - 4.7
36
1762
4.1
3.4 - 5.4
36

Throw is based on terminal velocities of 0.5 m/s - 0.25 m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CAC page 2 of 2

CEILING DIFFUSERS
CP Plate Type Round Diffuser
Materials

CP-T: 0.8mm galvanized steel.

Surface Finish

CP-T: white powder coat, oven baked as standard.

Accessories

C3 Deflector guide vane.


C3 Deflector guide vane can be connected to the round neck of CP-A.

Standard Sizes

150, 200, 250, 300(mm)

CP Construction Illustrations
B
C

H
E
D

CP Physical Dimension Unit:mm


Model

150
200
250
300

150
200
250
300

310
410
410
410

335
460
460
460

200
310
310
310

H
min
21
28
28
28

max
37
44
44
44

CP Product Specification Unit:mm


Model

CP-T

Materials

Surface Finish

Standard Sizes

Accessories

0.8 Galvanized Steel

White Powder Coat,


Oven Baked

150
200
250
300

C3 Deflector
Guide Vane

Order Key
CP - A + C1 - 250
Materials
Model

Neck Size

Accessories

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CP page 1 of 2

CEILING DIFFUSERS
CP Plate Type Round Diffuser
CP + C3 Deflector Guide Vane

C3 deflector guide vane consists of a splitter damper & equalizing deflector &
thus serve as even air distribution & volume control.
Constructed of 0.6mm galvanized steel & matt black as standard finish.

CP Performance Data
Neck Size mm
Neck Area m2
150
(0.0182)

200
(0.0324)

250
(0.0507)

300
(0.0731)

Neck Vel. (m/s)

CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC
CMH
Tot. Press(mmAq)
Throw(M)
NC

130
1.3
2.4 - 3.1
233
1.2
3.6 - 5.0
365
1.2
4.8 - 6.8
526
1.1
6.0 - 8.2
-

196
1.8
3.7 - 5.1
350
1.5
4.7 - 6.8
548
1.5
6.0 - 8.5
790
1.4
7.2 - 10.2
-

262
3.1
4.8 - 6.8
22
467
2.6
6.5 - 9.1
21
730
2.5
8.0 - 11.4
1052
2.3
9.7 - 13.5
-

328
4.5
6.0 - 8.5
29
583
3.9
8.0 - 11.2
27
913
3.6
10.2 - 14.1
25
1315
3.4
12.2 - 17.1
24

393
6.8
7.0 - 10.0
32
700
5.5
9.5 - 13.5
32
1095
5.2
12.2 - 17.2
31
1580
5.1
14.5 - 20.1
30

460
9.1
8.6 - 11.8
36
816
7.8
11.2 - 15.9
36
1280
7.2
14.2 - 19.1
35
1842
6.8
17.0 - 24.0
34

525
11.5
9.9 - 13.5
41
933
10.2
13.0 - 18.2
40
1460
9.4
16.1 - 22.0
39
2105
9.0
19.2 - 26.8
38

Throw is based on terminal velocities of 0.5 m/s-0.25 m/s respectively.


NC value is based on a room absorption of 8 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CP page 2 of 2

CEILING DIFFUSERS
PD & PDC Perforated Face Diffuser
Materials

PDC-A: 1.0mm extruded aluminum and 1.0mm aluminum perforated face.


PDC-T: 0.8mm galvanized steel and 0.8mm galvanized steel perforated face.

Surface Finish

Baked white powder coat.


Square to round adapter - matt black or E.G finished.
Diffuser face is perforated with round openings. For uniformity, this diffuser
series has both supply air & return air.
The perforated face is removable by unlocking the spring hatch for easy
adjustment of pattern deflectors.
The 4 pieces of pattern deflector can adjust the flow pattern
to 1, 2, 3 or 4 way. (optional)
Model PDC, face size is 603mm X 603mm suitable for T-Bar mounting.

Standard Sizes

200, 250, 300, 350, 400(mm)

PD & PDC Construction Illustrations

Enlargement of Removable Mechanism

Removable Type (Optional)

PD Physical Dimension Unit:mm


C - Neck Size
200
250
300
350

A - Duct Size
380 x 380
380 x 380
480 x 480
480 x 480

B - Ceiling Size
400 x 400
400 x 400
500 x 500
500 x 500

D - Face Size
460 x 460
460 x 460
560 x 560
560 x 560

H - Height
80
80
80
80

A - Duct Size

B - Ceiling Size

D - Face Size

H - Height

540 x 540

545

603 x 603

80

PDC Product Specification Unit:mm


C - Neck Size
200
250
300
350

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
PD & PDC page 1 of 3

CEILING DIFFUSERS
PD & PDC Perforated Face Diffuser
For model PD & PDC, the four pieces of deflector can adjust the flow pattern to 1, 2, 3 or 4 way.(Optional)
The perforated face is removable by unlocking the spring for easy adjustment of flow pattern.

PDC Performance Data


Neck Size mm
Neck Area m2

200
(0.0324)

250
(0.0507)

300
(0.0731)

350
(0.0979)

400
(0.1297)

Neck Vel. (m/s)


Vel. Press (mmAq)
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way

2
0.25
233
0.7
1.1 - 3.2
0.8 - 2.6
0.5 - 1.6
0.3 - 1.0
365
0.9
21
2.0 - 4.4
1.4 - 3.5
0.8 - 0.6
0.3 - 1.4
526
1.1
24
2.6 - 5.6
2.0 - 4.6
1.4 - 3.5
5.0 - 2.0
705
1.3
26
3.5 - 7.1
2.9 - 5.8
2.0 - 4.1
0.8 - 2.6
934
1.5
26
5.0 - 7.1
2.3 - 3.8
2.0 - 3.8
1.4 - 2.9

NC value is based on a room absorption of 10 dB, re 10-12 watts.


Dash (-) in space indicates NC value less than 20.

2.5
0.4
292
1.2
22
1.6 - 4.1
1.1 - 3.2
0.8 - 2.3
0.3 - 1.4
456
1.4
26
2.5 - 5.6
2.0 - 4.4
1.4 - 3.2
0.5 - 2.0
658
1.7
28
3.5 - 7.1
2.9 - 5.8
2.0 - 4.4
0.8 - 2.6
881
2.0
31
4.4 - 8.9
3.5 - 5.7
2.6 - 5.3
1.4 - 3.2
1167
2.4
32
5.6 - 8.1
2.9 - 4.4
2.3 - 4.4
2.3 - 3.2

3
0.55
350
1.6
26
2.2 - 4.6
1.6 - 3.7
1.1 - 2.9
0.5 - 1.6
548
2.0
30
3.2 - 6.8
2.6 - 5.6
2.0 - 4.1
0.8 - 2.2
790
2.4
33
4.1 - 8.6
3.5 - 7.1
2.6 - 5.2
1.4 - 3.2
1057
2.7
35
5.3 - 11.0
4.4 - 8.9
3.2 - 6.5
1.7 - 3.7
1400
3.4
35
6.2 - 9.0
3.2 - 4.7
2.9 - 4.7
2.6 - 3.5

3.5
0.75
408
2.2
28
2.6 - 5.6
2.2 - 4.6
1.4 - 3.2
0.5 - 2.0
640
2.7
34
3.7 - 8.1
3.2 - 6.5
2.3 - 4.7
1.1 - 2.8
920
3.3
38
5.0 - 9.9
4.1 - 8.3
2.8 - 6.1
1.7 - 3.7
1234
3.8
39
6.2 - 12.8
5.0 - 10.4
3.7 - 7.7
2.3 - 4.6
1635
4.6
40
6.8 - 9.5
3.5 - 5.0
3.4 - 7.0
2.6 - 3.7

4
1.0
467
2.8
34
3.2 - 6.5
2.6 - 5.3
1.6 - 3.7
0.8 - 2.3
730
3.5
38
4.4 - 8.9
3.5 - 7.5
2.6 - 5.3
1.4 - 3.2
1052
4.3
42
5.6 - 11.5
4.6 - 9.5
3.5 - 7.1
2.0 - 4.1
1410
4.9
45
7.1 - 14.7
5.8 - 11.8
4.1 - 8.6
2.6 - 5.3
1868
6.0
46
7.1 - 10.5
3.7 - 5.3
3.6 - 5.3
2.8 - 4.1

4.5
1.25
525
3.5
39
3.6 - 7.0
2.9 - 6.0
2.0 - 4.4
1.1 - 2.6
820
4.4
42
5.0 - 9.7
3.9 - 8.4
2.9 - 6.0
1.7 - 3.7
1185
5.4
46
6.3 - 12.6
5.3 - 10.7
3.9 - 8.1
2.3 - 4.6
1585
6.3
50
8.1 - 16.0
6.6 - 13.6
4.7 - 10.0
2.9 - 6.0
2100
7.6
50
7.6 - 11.0
4.0 - 5.6
3.9 - 5.6
3.0 - 4.4

5
1.55
583
4.4
42
4.1 - 7.5
3.2 - 6.5
2.3 - 5.0
1.4 - 3.0
913
5.5
47
5.6 - 10.4
4.4 - 9.2
4.4 - 9.2
2.0 - 4.1
1315
6.6
49
7.1 - 13.5
5.8 - 11.9
4.4 - 8.9
2.6 - 5.2
1762
7.6
53
9.0 - 16.8
7.5 - 14.7
5.3 - 11.0
3.2 - 6.8
2335
9.4
54
8.1 - 11.6
4.2 - 5.8
4.2 - 5.8
3.2 - 4.7

Ducted return data for PDC: Negative SP = Total Press. NC = Above Plus 2dB

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
PD & PDC page 2 of 3

CEILING DIFFUSERS
PD & PDC Perforated Face Diffuser
Performance Data for PDC
Neck Size mm
Neck Area m2
240 x 240
(0.0576)
340 x 340
(0.1156)
440 x 440
(0.1936)
540 x 540
(0.2916)

Neck Vel. (m/s)


Vel. Press (mmAq)
Neg. SP. (mmAq)
CMH
NC
CMH
NC
CMH
NC
CMH
NC

2
0.25
1.3
414
832
1394
2100
-

2.5
0.4
1.9
518
1040
1742
2625
21

3
0.55
2.8
622
1250
21
2090
22
3150
23

3.5
0.75
3.9
725
21
1456
24
2440
26
3675
27

4
1.0
5.0
830
25
1665
28
2788
29
4200
31

4.5
1.25
6.6
933
29
1873
31
3136
34
4724
35

5
1.66
7.6
1037
32
2080
35
3485
37
5250
39

2.5
0.4
292
1.1
1.6 - 4.1
1.1 - 3.2
0.8 - 2.3
0.3 - 1.4
456
1.4
2.5 - 5.6
2.0 - 4.4
1.4 - 3.2
0.5 - 2.0

3
0.55
350
1.6
2.2 - 4.6
1.6 - 3.7
1.1 - 2.9
0.5 - 1.6
548
2.0
30
3.2 - 6.8
2.6 - 5.6
2.0 - 4.1
0.8 - 2.2

3.5
0.75
408
2.2
23
2.6 - 5.6
2.2 - 4.6
1.4 - 3.2
0.5 - 2.0
640
2.7
25
3.7 - 8.1
3.2 - 6.5
2.3 - 4.7
1.1 - 2.8

4
1.0
467
2.8
26
3.2 - 6.5
2.6 - 5.3
1.6 - 3.7
0.8 - 2.3
730
3.5
29
4.4 - 8.9
3.5 - 7.5
2.6 - 5.3
1.4 - 3.2

4.5
1.25
525
3.5
29
3.6 - 7.0
2.9 - 6.0
2.0 - 4.4
1.1 - 2.6
820
4.4
30
5.0 - 9.7
3.9 - 8.4
2.9 - 6.0
1.7 - 3.7

5
1.55
583
4.3
33
4.1 - 7.5
3.2 - 6.5
2.3 - 5.0
1.4 - 3.0
913
5.5
35
5.6 - 10.4
4.4 - 9.2
3.2 - 6.8
2.0 - 4.1

2.5
0.4
658
1.7
26
3.5 - 7.1
2.9 - 5.8
2.0 - 4.4
0.8 - 2.6
881
2.0
28
4.4 - 8.9
3.5 - 7.5
2.6 - 5.3
1.4 - 3.2

3
0.55
790
2.4
30
4.1 - 8.6
3.5 - 7.1
2.6 - 5.2
1.4 - 3.2
1057
2.7
33
5.3 - 11.0
4.4 - 8.9
3.2 - 6.5
1.7 - 3.7

3.5
0.75
920
3.3
34
5.0 - 9.9
4.1 - 8.3
2.8 - 6.1
1.7 - 3.7
1234
3.8
36
6.2 - 12.8
5.0 - 10.4
3.7 - 7.7
2.3 - 4.6

4
1.0
1052
4.3
38
5.6 - 11.5
4.6 - 9.5
3.5 - 7.1
2.0 - 4.1
1410
4.9
40
7.1 - 14.7
5.8 - 11.8
4.1 - 8.6
2.6 - 5.3

4.5
1.25
1185
5.4
42
6.3 - 12.6
5.3 - 10.7
3.9 - 8.1
2.3 - 4.6
1585
6.3
46
8.1 - 16.0
6.6 - 13.6
4.7 - 10.0
2.9 - 6.0

5
1.55
1315
6.6
46
7.1 - 13.5
5.8 - 11.9
4.4 - 8.9
2.6 - 5.2
1762
7.6
49
9.0 - 16.8
7.5 - 14.7
5.3 - 11.0
3.2 - 6.8

NC value is based on a room absorption of 10 dB, re 10-12 watts.


Dash (-) in space indicates NC value less than 20.

Performance Data for PD 460 X 460


Neck Size mm
Neck Area m2

200
(0.0324)

250
(0.0507)

Neck Vel. (m/s)


Vel. Press (mmAq)
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way

2
0.25
233
0.7
1.1 - 3.2
0.8 - 2.6
0.5 - 1.6
0.3 - 1.0
365
0.9
2.0 - 4.4
1.4 - 3.5
0.8 - 2.6
0.3 - 1.4

Performance Data for PD 560 X 560


Neck Size mm
Neck Area m2

300
(0.0731)

350
(0.0979)

Neck Vel. (m/s)


Vel. Press (mmAq)
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way
CMH
Tot. Press (mmAq)
NC
1 Way
Throw
2 Way
(m)
3 Way
4 Way

2
0.25
526
1.1
21
2.6 - 5.6
2.0 - 4.6
1.4 - 3.5
0.5 - 2.0
705
1.3
22
3.5 - 7.1
2.9 - 5.8
2.0 - 4.1
0.8 - 2.6

Throw is based on terminal velocities of 0.5 m/s-0.25 m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.

Ducted return data for PDC: Negative SP = Total Press. NC = Above Plus 2dB

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
PD & PDC page 3 of 3

CEILING DIFFUSERS
SW-2T Swirl Diffuser
Description

ASLI SW-2T series is a type of diffuser with fixed radially arranged air control
blades. This unique type of slots provide high induction vortex air flow
projecting horizontally from the face of diffuser. This swirling air flow produce a
diffuse air distribution, with no stationary air jet resulting excellent uniformity of
temperature in air conditioned space. SW-2T is suitable in area of high heat load
where large quantities of cool air must be rapidly mixed with room air; areas which
require high air change in a short time. The SW-2T series can also be use as a
return and exhaust type device.

Materials

Diffuser Face: 1.0mm thickness galvanized steel.


Outer Frame: 1.0mm thickness galvanized steel.

Surface Finish

Baked white powder coated as standard.

Features

Diffuser face can be open without using any tools.


Volume control damper is adjustable without removing ceiling panel.
Swirl air pattern provides high induction ratio.
High coanda effect reduces direct-throw of air on occupants.
Standard sizes available for T-bar ceiling on metric or imperial size.

Standard Sizes

SW-2T: 595mm X 595mm, 603mmX603mm (face size).


SWR-2T: 565mm outer diameter.

Accessories

Plenum box, radial blade damper (C1) , perforated sheet (PS),


round inlet adapter (D2), crown damper (C2).

SW-2T Models
Model Code
SW-2T
SW-2T + PB-S
SW-2T + PB-T
SW-2T + D2 + C1
SWR-2T
SWR-2T+ D2
SWR-2T+D2+C1

Description
Square swirl diffuser
SW-2T with plenum box side entry
SW-2T with plenum box top entry
SW-2T with round inlet adapter and radial blade damper
Round swirl diffuser
SWR-2T with round inlet adapter
SWR-2T with round inlet adapter and radial blade damper

Other models are available upon request


All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SW-2T page 1 of 4

CEILING DIFFUSERS
SW-2T Swirl Diffuser
SW-2T Construction Illustrations

No.of blades=29

Top View

SW-2T

Side View

Top View

SWR-2T

Side View

Top Round Inlet ID


Ovel Inlet
Nominal Inlet
Diameter, ID

SW-2T+PB (Side View)

SW-2T+D2 (Side View)

SW-2T Physical Dimension Unit:mm


D

OC

IC

RH

PH

PL

IL

AH

CH

603
595

535

515

190

565

49

40

153
178*

541

75

100

60

C
150
200
250
300

ID
150
200
250
300

PH = 178 when ID = 300


All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SW-2T page 2 of 4

CEILING DIFFUSERS
SW-2T Swirl Diffuser
SW-2T Construction Illustrations
Blades

Perforated Sheet
(Optional)

Outer Frame

Collar
Diffuser Face

Locking
Mechanism
Outer Frame

SW-2T

Isometric Top View

Isometric Back View

Perforated Sheet (Optional)

Diffuser Face
Blade

Collar

SWR-2T

Isometric Top View

Isometric Back View

Radial Blade Damper (C1)

Plenum Box (PB)

Round Inlet Adapter (D2)


Inlet Collar

Butterfly Damper

SW-2T+PB-S (Isometric Back View)

SW-2T+D2+C1 (Isometric Back View)

SW-2T+PB-S in open position

SW-2T+D2+C1 in open position

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SW-2T page 3 of 4

CEILING DIFFUSERS
SW-2T Swirl Diffuser
SW-2T Air Flow Performance Data
Inlet Diameter Collar Neck Vel. (m/s)
(mm)
Vel. Press (mmAq)
CMH
Tot. Press (mmAq)
150
NC
Throw (m)
CMH
Tot.
Press
(mmAq)
200
NC
Throw (m)
CMH
Tot.
Press
(mmAq)
250
NC
Throw (m)
CMH
Tot. Press (mmAq)
300
NC
Throw (m)

1.5
0.2
97
0.3
0.6 ~ 1.2
172
0.4
0.6 ~ 1.2
269
0.6
0.9 ~ 1.8
388
1.3
1.2 ~ 2.4

2.0
0.3
129
0.6
0.9 ~ 1.5
230
0.7
0.9 ~ 1.5
359
1.1
1.2 ~ 2.4
517
2.3
24
1.5 ~ 3.0

2.5
0.4
161
0.9
0.9 ~ 1.8
287
1.2
0.9 ~ 2.1
449
1.7
21
1.5 ~ 2.7
646
3.5
30
1.8 ~ 3.4

3.0
0.6
194
1.2
1.2 ~ 1.8
344
1.7
21
1.2 ~ 2.1
538
2.9
28
1.8 ~ 3.0
775
5.1
38
2.4 ~ 4.0

3.5
0.8
223
1.7
1.5 ~ 2.1
396
2.3
27
1.5 ~ 2.4
619
3.9
34
2.1 ~ 3.4
891
6.8
41
2.7 ~ 4.3

4.0
1.0
254
2.2
1.5 ~ 2.1
452
3.0
31
1.5 ~ 2.7
707
4.9
36
2.4 ~ 3.7
1018
9.0
44
3.0 ~ 4.6

4.5
1.3
286
2.7
23
1.5 ~ 2.4
509
3.7
35
1.8 ~ 2.7
795
6.1
40
2.7 ~ 4.0
1145
11.3
47
3.4 ~ 4.6

5.0
1.6
318
3.2
26
1.8 ~ 2.4
565
4.8
38
2.1 ~ 3.0
884
7.6
42
2.7 ~ 4.0
1272
14.1
49
3.7 ~ 4.9

5.5
1.9
350
3.9
30
1.8 ~ 2.7
622
5.5
40
2.1 ~ 3.0
972
9.1
44
3.0 ~ 4.3
1400
17.0
51
3.7 ~ 5.2

6.0
2.3
382
4.8
33
1.8 ~ 2.7
679
6.5
41
2.1 ~ 3.4
1060
10.8
46
3.0 ~ 4.3
1527
21.4
54
3.9 ~ 5.5

Throw is based on terminal velocities of 0.5m/s and 0.25m/s respectively.


Throw is based on isothermal condition.
NC value is based on room absorption of 10dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
The above performance data is applicable for SW-2T + D2 and SWR-2T + D2.
Apply the following factor for C1 and PB.

Tot. Press
NC
Throw

C1
X 1.2
+2
X 0.9

PB
X 1.2
+2
X 0.85

SW-2T Suggested Specification

SW-2T Swirl Diffuser shall have a removable one piece stamped face of 1.0mm thickness galvanized steel containing a circular round pattern of blades. The
diffuser face shall contain 29 pieces of blades. The interior of the face shall contain a steel collar bordering the ends of the blades. The steel collar shall be
securely welded to the rear of the diffuser face. The diffuser face shall be removable without using any tools from the diffuser face. The diffuser face shall contain
two steel rods at the corner to be slotted into the round rubber sleeve at the frame when the diffuser face is closed. The diffuser face shall rotate in one axis and
remain attached to the frame when the diffuser face is fully open. The diffuser shall come with round perforated sheet at the steel collar. The diffuser shall be
epoxy coated and furnished to architectural requirement.

SW-2T Order Code


Model
SW-2T
SWR-2T

Casing
Plenum Box (PB)
Adapter (D2)

Accessories
Radial Blade Damper (C1)
Perforated Sheet (PS)

Example: SW-2T + D2 + C1 + PS

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SW-2T page 4 of 4

CEILING DIFFUSERS
SW-3T Curve-Blade Swirl Diffuser
Description

SW-3T series of curve-blade swirl diffuser is a diffuser with fixed radially arranged
curved air control blades. The curve profile of the blades and opening allow the air
to be delivered horizontally with cyclone characteristic, which provide better
induction "vortex" air flow than normal straight profile swirl diffuser. Room
temperature and air velocity will be reduced effectively to achieve excellent
uniformity of temperature in a comfort air-conditioned space. It can be used as
supply or return air device.

Materials

1.0 mm galvanized steel.

Surface Finish

Baked white powder coated as standard.

Features

Air delivered horizontally with cyclone characteristic.


Low sound level at high air volume.
The blades and the opening area are in curved profile.
The diffuser face plate is removable.

SW-3T Construction Illustrations

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SW-3T page 1 of 2

CEILING DIFFUSERS
SW-3T Curve-Blade Swirl Diffuser
SW-3T Air Flow Performance Data
Inlet Diameter Collar Neck Vel. (m/s)
(mm)
Vel. Press (mmAq)
CMH
Tot. Press (mmAq)
150
NC
Throw (m)
CMH
Tot.
Press
(mmAq)
200
NC
Throw (m)
CMH
Tot.
Press
(mmAq)
250
NC
Throw (m)
CMH
Tot. Press (mmAq)
300
NC
Throw (m)

1.5
1.5
97
0.3
0.7 - 1.3
172
0.4
0.7 - 1.3
269
0.7
1.0 - 2.0
388
1.5
1.3 - 2.6

2.0
2.5
129
0.6
1.0 - 1.7
230
0.8
1.0 - 1.7
359
1.2
1.3 - 2.6
517
2.6
25
1.7 - 3.3

2.5
4.0
161
1.0
1.0 - 2.0
287
1.3
1.0 - 2.3
449
1.9
22
1.7 - 3.0
646
3.8
31
2.0 - 3.7

3.0
5.5
194
1.4
1.3 - 2.0
344
1.9
22
1.3 - 2.3
538
3.1
29
2.0 -3.3
775
5.6
39
2.6 - 4.4

3.5
7.7
223
1.9
1.7 - 2.3
396
2.6
28
1.7 - 2.6
619
4.3
35
2.3 - 3.7
891
7.5
42
3.0 - 4.7

4.0
10.0
254
2.4
1.7 - 2.3
452
3.3
32
1.7 - 3.0
707
5.4
37
2.6 - 4.1
1018
9.9
45
3.3 - 5.1

4.5
12.7
286
3.0
24
1.7 - 2.6
509
4.0
36
2.0 - 3.0
795
6.7
41
3.0 - 4.4
1145
12.5
48
3.7 - 5.1

5.0
15.4
318
3.5
27
2.0 - 2.6
565
5.3
39
2.3 - 3.3
884
8.3
43
3.0 - 4.4
1272
15.5
50
4.1 - 4.7

5.5
18.7
350
4.3
31
2.0 - 3.0
622
6.1
41
2.3 - 3.3
972
10.0
45
3.3 - 4.7
1400
18.7
52
4.1 - 5.7

6.0
22.4
382
5.3
34
2.0 - 3.0
679
7.2
42
2.3 - 3.7
1060
11.9
47
3.3 - 4.7
1527
23.6
55
4.3 - 6.1

Throw is based on terminal velocities of 0.5m/s and 0.25m/s respectively.


Throw is based on isothermal condition.
NC value is based on room absorption of 10dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
The above performance data is applicable for SW-3T + D2.
Apply the following factor for C1 and PB.

C1
X 1.2
+2
X 0.9

Tot. Press
NC
Throw

PB
X 1.2
+2
X 0.85

SW-3T Order Code


Model
SW-3T

Face Size,
Q (mm)
598 / 603

Plenum Box,
Height (mm)
PB 200

Vertical Inlet (V)


Horizontal Inlet (H)
V

Inlet Size
(mm)
250

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SW-3T page 2 of 2

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
Materials

SLLS extruded aluminium A6063.

Surface Finish

Baked white powder coat as standard.


Pattern controller vane is black anodised.

Features

SLLS linear ceiling diffuser can be used in T-bar ceiling suspension system &
other ceiling types as well.
The diffuser incorporates curved blade pattern controller for adjustable of air
distribution.
Available in 1 slot to 6 slots.
Linear diffusers that come with plenum boxes are known as SLLSB.
Model SLLS-1 has a 90 mitred corner connection & model SLLS-2 is 45.
Approximately 38% free area when blades are fully open.

Standard Sizes
600(2'), 1200(4').

SLLS Construction Illustrations

SLLS Physical Dimension Unit:mm


Model
1 Slot
2 Slot
3 Slot
4 Slot
5 Slot
6 Slot

Materials

Extruded Aluminium A6063

Thickness
Frame Blade

1.0

0.8

W
Neck Size
48
93
138
183
228
273

A
Duct Size

B
Ceiling Size

D
Face Size

Order Key
SLLS - 1 - 2 - 100

L+10
W+10

L+15
W+15

L+37
W+37

Length
90
Model

No. of Slot

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 1 of 8

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
SLLS Frame Details

SLLS Air Distribution Adjustment

Model SLLSB: SLLS Linear Diffuser c/w Plenum Box


Plenum box is constructed of 0.5mm SPGC galvanized steel.
Two types of insulation are available.
External insulation: 25mm X 24kg/m2 fiberglass wrapped with fiber-reinforced
aluminium foil.(Optional)
Internal insulation: 5mm thick PE foam.

s
H

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 2 of 8

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
SLLS Physical Dimension Unit:mm
L
Length of Plenum Box

W
Width of Plenum Box

H
Height of Plenum Box

S
Inlet Size

Face length of slot diffuser

Neck width of slot diffuser W + 20

230

100 ~ 300 oval shape

Model SLL & Plenum Box Installation

SLL linear supply air diffusers have a U-type fastening hook & an adjustable screws for installing the diffuser onto the plenum box.
For installation, one can install the diffuser together with the plenum box. However for some application, one can fix the box onto the ceiling, then use the
U-type fastening hook to fasten the diffuser to the plenum box. Use the screw to adjust the face flush with the ceiling.

SLLS (Supply) Performance Data


No. of Slot

1 Slot

2 Slot

3 Slot

4 Slot

5 Slot

6 Slot

Neck Vel. (m/s)


St. Press. (mmAq)
CMH
NC
H
Throw (M)
V
CMH
NC
H
Throw (M)
V
CMH
NC
H
Throw (M)
V
CMH
NC
H
Throw (M)
V
CMH
NC
H
Throw (M)
V
CMH
NC
H
Throw (M)
V

0.4
0.1
48
0.6 - 1.8
0.6
88
0.9 - 3.7
1.5
136
1.5 - 4.3
2.1
177
1.8 - 4.9
2.4
224
2.4 - 5.5
2.7
272
3.0 - 6.1
2.7

0.8
0.4
88
1.8 - 4.9
2.4
177
3.7 - 7.0
3.4
272
4.3 - 8.5
4
360
4.9 - 10.1
4.6
449
5.5 - 11.0
5.2
537
12
6.1 - 12.2
5.8

1.3
0.8
136
13
3.7 - 6.4
3.7
272
16
5.2 - 8.8
4.9
401
18
6.4 - 11.0
6.1
537
19
7.3 - 12.8
7
673
20
8.2 - 14.0
7.6
809
22
9.1 - 15.5
8.5

1.6
1.4
177
20
4.9 - 7.3
4.3
360
23
7.0 - 12.8
5.8
537
25
8.5 - 12.8
7.3
721
26
10.1 - 14.6
8.5
898
27
11.0 - 16.5
9.4
1074
29
12.2 - 18.0
10.4

2.1
2.3
224
26
5.8 - 8.2
4.6
449
29
8.2 - 11.6
6.7
673
30
10.1 - 14.0
8.2
898
32
11.6 - 16.5
9.4
1122
33
12.8 - 18.3
10.4
1346
34
14.0 - 20.1
11.6

2.5
3.3
272
30
6.4 - 8.8
5.2
537
33
8.8 - 12.8
7.3
809
35
11.0 - 15.5
8.8
1074
36
12.8 - 18.0
10.4
1346
37
14.0 - 20.1
11.6
1618
38
15.5 - 21.9
12.5

2.9
4.4
313
34
6.7 - 9.8
5.5
626
37
9.8 - 13.7
7.9
945
39
11.9 - 16.8
9.8
1258
40
13.7 - 19.2
11
1571
41
15.2 - 21.6
12.5
1884
42
16.8 - 23.8
13.7

3.3
5.8
360
37
7.3 - 10.4
5.8
721
40
10.4 - 14.6
8.5
1074
42
12.8 - 18.0
10.4
1435
43
14.6 - 20.7
11.9
1795
44
16.5 - 23.2
13.1
2156
45
18.0 - 25.3
14.6

3.7
7.3
401
40
7.6 - 11.0
6.1
809
43
11.0 - 15.5
9.1
1210
45
13.4 - 18.9
11
1618
46
15.5 - 21.9
12.8
2020
47
17.4 - 24.4
13.7
2421
48
18.9 - 26.8
15.5

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 3 of 8

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
SLLS (Return) Performance Data
No. of Slots
1 Slot
2 Slot
3 Slot
4 Slot
5 Slot
6 Slot

Neg. SP (mmAq)
CMH
NC
CMH
NC
CMH
NC
CMH
NC
CMH
NC
CMH
NC

0.5
135
270
405
545
680
1224
-

1.0
200
405
610
815
1020
1224
-

1.8
270
545
22
815
24
1085
24
1360
22
1632
23

2.8
340
24
680
27
1020
29
1360
30
1700
28
2040
29

4.1
405
29
815
31
1225
34
1630
35
2040
33
2448
34

5.5
475
33
950
36
1425
38
1905
39
2380
37
2856
38

7.2
545
37
1085
40
1630
42
2175
43
2720
41
3264
42

11.5
680
43
1360
46
2040
48
2720
49
3400
47
4080
48

Throw values are based on an entire section 1.2 meter long.


Vertical throw is based on terminal velocity of 0.25m/s.
Horizontal throw is based on terminal velocities of 0.5m/s 0.25m/s respectively.
NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance data are obtain based on isothermal condition.

NC correction for various diffuser lengths


Length (m)
Supply NC
Return NC

0.6
-3
-3

1.2
0
0

2.4
+3
+5

0.6
0.7

1.2
1.0

2.4
1.5

Throw correction multiplier for length


Length
Throw Correction

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 4 of 8

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
SLLSB Performance Data
No. of
Slot

Round
Inlet (mm)

Length
(mm)
600

150
1200

600
1

200
1200

600
1

250
1200

300

1200

CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)

51
0.4
1.8 - 3.4
77
0.3
0.6 - 2.7
51
0.4
1.5 - 4.0
85
0.3
1.5 - 3.0
68
1.1
2.4 - 5.2
102
0.4
1.8 - 3.7
119
0.6
2.1- 4.0

77
0.8
2.7 - 4.0
116
0.8
2.1 - 4.0
82
1.0
3.0 - 6.4
128
0.6
2.4 - 4.0
94
2.1
3.7 - 7.3
153
0.8
2.7 - 4.6
179
1.4
3.4 - 4.9

102
1.4
26
3.4 - 4.6
153
1.4
25
2.7 - 4.6
111
1.9
24
4.3 - 8.2
170
1.1
23
3.0 - 4.9
119
3.4
23
4.6 - 8.5
204
1.4
25
3.7 - 5.2
238
2.5
25
4.0 - 5.5

128
2.3
31
3.7 - 5.2
192
2.1
30
3.7 - 5.2
141
3.1
29
5.5 - 9.4
213
1.7
29
3.7 - 5.2
145
5.1
27
5.8 - 9.4
255
2.2
30
4.0 - 5.8
298
3.9
30
4.6 - 6.4

153
3.3
35
4.0 - 5.5
230
3.1
35
4.0 - 5.5
170
4.5
34
6.7 - 10.4
255
2.5
33
4.0 - 5.8
170
7.0
31
6.7 - 10.4
306
3.2
35
4.6 - 6.4
357
5.7
34
4.9 - 7.0

179
4.5
38
4.3 - 6.1
269
4.2
38
4.3 - 6.1
201
6.3
38
7.9 - 11.3
298
3.4
37
4.6 - 6.4
196
9.2
35
7.6 - 11.0
357
4.4
38
4.9 - 7.0
417
7.7
38
5.2 - 7.3

204
5.8
42
4.6 - 6.4
306
5.5
41
4.6 - 6.4
230
8.3
41
8.5 - 11.9
340
4.4
40
4.9 - 6.7
221
11.8
37
8.2 - 11.9
408
5.7
41
5.2 - 7.3
476
10.1
41
5.5 - 7.9

Throw is based on terminal velocities of 0.5m/s 0.25m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance data are obtain based on isothermal condition.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 5 of 8

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
SLLSB Performance Data
No. of
Slot

Round
Inlet (mm)

Length
(mm)
600

150
1200

600
2
200
1200

600
2
250
1200

300

1200

CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)

68
0.3
0.9 - 3.7
119
0.5
0.9 - 3.0
85
0.3
1.5 - 4.6
153
0.5
1.5 - 4.0
102
0.4
2.1 - 5.5
170
0.4
2.1 - 4.6
204
0.4
2.7 - 5.2

107
0.7
2.1 - 5.8
175
1.1
2.1 - 4.6
128
0.6
3.0 - 7.0
213
0.9
2.7 - 5.2
153
0.8
4.3 - 8.5
247
0.8
3.4 - 5.8
289
0.8
3.7 - 6.1

145
1.2
24
4.0 - 7.9
230
2.0
24
3.0 - 5.5
170
1.1
23
4.6 - 9.4
272
1.4
24
3.7 - 6.1
204
1.4
25
5.5 - 11.3
323
1.4
25
4.3 - 6.4
374
1.3
25
4.9 - 7.0

184
2.0
29
5.2 - 10.1
286
3.0
29
3.7 - 6.1
213
1.7
29
5. 8 - 11.6
332
2.1
29
4.3 - 6.7
255
2.2
30
7.0 - 12.8
400
2.1
30
5.2 - 6.4
459
1.9
29
5.5 - 7.9

221
2.8
34
6.1 - 11.9
340
4.3
33
4.6 - 6.7
255
2.5
33
7.0 - 12.8
391
2.9
33
5.2 - 7.3
306
3.2
35
8.5 - 14.0
476
2.9
34
5.5 - 7.9
544
2.7
33
6.1 - 8.5

260
3.9
37
7.0 - 12.8
396
5.9
37
5.2 - 7.3
298
3.4
37
8.2 - 13.7
451
3.9
36
8.5 - 7.6
357
4.4
38
9.8 - 14.9
553
4.0
38
6.1 - 8.5
459
3.6
37
6.4 - 9.1

298
5.2
41
8.2 - 13.7
451
7.6
40
5.5 - 7.6
340
4.4
40
9.4 - 14.6
510
4.9
39
5.8 - 8.2
408
5.7
41
11.3 - 16.2
629
5.2
41
6.4 - 9.1
714
4.6
40
7.0 - 9.8

Throw is based on terminal velocities of 0.5m/s 0.25m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance data are obtain based on isothermal condition.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 6 of 8

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
SLLSB Performance Data
No. of
Slot

Round
Inlet (mm)

Length
(mm)
600

150
1200

600
3
200
1200

600
3
250
1200

300

1200

CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)

102
0.5
1.2 - 4.6
162
0.8
0.9 - 3.4
85
0.2
0.9 - 3.0
170
0.4
1.2 - 3.7
136
0.3
1.8 - 6.1
204
0.4
1.5 - 4.3
255
0.4
2.4 - 5.5

145
0.9
2.1 - 6.4
221
1.6
1.8 - 4.6
153
0.6
2.4 - 7.0
264
1.0
2.7 - 5.5
196
0.7
4.0 - 8.8
303
0.9
3.4 - 6.4
366
0.7
4.0 - 7.0

187
1.5
23
3.7 - 8.5
281
2.6
22
3.0 - 6.1
221
1.2
23
4.9 - 10.1
357
1.9
24
3.7 - 7.0
255
1.2
24
5.8 - 11.6
400
1.5
24
4.3 - 7.3
476
1.2
24
5.2 - 7.9

230
2.3
28
5.2 - 10.4
340
3.8
27
3.7 - 6.7
289
2.0
30
6.4 - 13.1
451
3.0
30
4.9 - 7.6
315
1.8
29
7.0 - 14.0
498
2.3
29
5.2 - 8.2
587
1.8
29
6.1 - 8.8

272
3.2
32
6.1 - 12.2
400
5.2
31
4.3 - 7.3
357
3.1
35
7.9 - 14.9
544
4.4
34
5.8 - 8.5
374
2.5
33
8.5 - 15.2
595
3.4
34
6.4 - 8.8
697
2.6
33
6.7 - 9.4

315
4.3
36
7.0 - 14.0
459
6.9
34
4.9 - 7.9
425
4.3
39
9.4 - 16.5
638
6.1
38
6.4 - 9.1
434
3.4
37
9.8 - 16.5
694
4.5
37
6.7 - 9.4
808
3.5
37
7.3 - 10.4

357
5.6
39
7.9 - 14.9
519
8.8
37
5.5 - 8.2
493
5.8
42
11.0 - 17.7
731
8.0
41
7.0 - 9.8
493
4.4
40
11.0 - 17.1
791
5.9
40
7.3 - 10.4
918
4.5
40
7.9 - 11.0

Throw is based on terminal velocities of 0.5m/s 0.25m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance data are obtain based on isothermal condition.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 7 of 8

CEILING DIFFUSERS
SLLS Linear Ceiling Diffuser
SLLSB Performance Data
No. of
Slot

Round
Inlet (mm)

Length
(mm)
600

150
1200

600
4

200
1200

600
4

250
1200

300

1200

CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)
CMH
Tot. Press (mmAq)
NC
Throw (m)

119
0.5
0.9 ~ 4.0
196
1.1
0.9 ~ 3.7
102
0.2
0.6 ~ 2.8
238
0.7
1.5 ~ 4.3
170
0.4
1.9 ~ 4.9
272
0.6
1.9 ~ 4.9
323
0.4
2.5 ~ 6.2

175
1.1
2.2 ~ 6.8
277
2.3
1.9 ~ 5.2
179
0.6
2.2 ~ 7.1
340
1.5
2.8 ~ 6.5
243
0.7
3.7 ~ 7.1
383
1.1
3.7 ~ 7.1
451
0.8
4.3 ~ 7.7

230
1.9
24
3.7 ~ 8.9
357
3.9
24
3.1 ~ 6.8
255
1.2
22
4.6 ~ 10.2
442
2.7
25
4.0 ~ 7.7
315
1.3
25
4.6 ~ 8.0
493
1.9
25
4.6 ~ 8.0
578
1.3
24
5.2 ~ 8.9

286
3.1
29
5.6 ~ 11.1
439
5.8
29
4.0 ~ 7.7
332
2.0
29
6.5 ~ 13.0
544
4.0
30
4.9 ~ 8.6
388
1.9
30
5.6 ~ 8.9
604
3.0
30
5.6 ~ 8.9
706
2.0
29
6.5 ~ 9.9

340
4.4
33
6.8 ~ 13.6
519
8.2
33
4.9 ~ 8.3
408
3.2
34
8.0 ~ 16.0
646
5.5
34
6.2 ~ 9.3
459
2.8
34
6.8 ~ 9.9
714
4.1
34
6.8 ~ 9.9
833
2.9
33
7.4 ~ 10.5

396
5.9
37
7.7 ~ 15.7
600
10.9
36
5.6 ~ 8.9
485
4.5
38
9.6 ~ 17.6
748
7.4
37
7.1 ~ 10.2
532
3.7
37
7.4 ~ 10.5
825
5.5
37
7.4 ~ 10.5
961
3.8
36
8.0 ~ 11.4

451
7.7
40
8.9 ~ 17.0
680
14.0
39
6.5 ~ 9.6
561
5.9
41
11.1 ~ 19.1
850
9.7
40
7.7 ~ 10.8
604
4.8
40
8.0 ~ 11.1
935
7.0
40
8.0 ~ 11.1
1088
4.8
39
8.6 ~ 12.0

Throw is based on terminal velocities of 0.5m/s 0.25m/s respectively.


NC value is based on a room absorption of 10 dB, re 10-12 watts.
Dash (-) in space indicates NC value less than 20.
Performance data are obtain based on isothermal condition.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
SLLS page 8 of 8

CEILING DIFFUSERS
LTD Light Troffer
Description

ASLI Light Troffer Diffusers (LTD) are designed to fit virtually any available light
fixture with air diffuser capabilities. The coordination of air distribution and
lighting into a single, efficient ceiling unit, giving a pleasing appearance. The LTD
deflectors direct the supply air away from the light fitting as to prevent
condensation. LTD are excellent for VAV system as they have high induction ratio
and strong horizontal air pattern. Standard features include volume damper and
locking tabs to hold the diffuser to the light fixture.

Materials
Part
Casing
Blade
Insulation

Standard
0.7mm Galvanized Steel
0.5mm Galvanized Steel
PE foam

Optional
1.0mm Galvanized Steel
Extruded Aluminum
Fiberglass

Surface Finish

Mill galvanized on body.


Matt black on the slot diffuser face.

Features

Custom manufactured to fit all air handling light fixtures.


Volume control damper at the inlet to control air volume.
Air pattern adjustable from horizontal to vertical through deflectors.
Oval and round inlet available.
Supply or return air application.
Internal insulation.

Butterfly
Damper

Standard Models

Single sided/side inlet (LTD-S-S)


Double sided/side inlet (LTD-D-S)
Double sided/top inlet (LTD-D-T)

Standard Nominal Inlet Diameter

Top round/oval inlet nominal diameter: 100, 125, 150, 200 (mm)
Side oval inlet nominal diameter: 100, 125, 150, 200 (mm)

LTD Construction Illustrations


Oval Inlet,
Nominal Diameter, ID

Adjustable Blade

Internal Insulation

SECTION A-A
SCALE 1:10

DETAIL B
SCALE 1:3

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
LTD page 1 of 4

CEILING DIFFUSERS
LTD Light Troffer Diffuser
Performance Data for LTD
LTD-S-S (600mm)

Inlet Size (mm)

100

Throw (m)
Tot. Press.
(mmAq)
NC

125

Tot. Press.
(mmAq)
NC

150

Tot. Press.
(mmAq)
NC

CMH
H
V
H
V
H
V
H
V
H
V
H
V
H
V

50
2.4-3.0
1.2-1.8
1.8
1.5
1.2
1.1
0.9
0.7
-

60
2.7-3.3
1.5-2.1
2.5
2.0
1.7
1.4
1.2
1.0
-

65
2.7-3.9
1.5-2.1
3.2
2.7
20
2.3
1.9
1.6
1.3
-

75
3.0-4.2
1.5-2.4
4.1
3.4
23
22
2.9
2.4
2.0
1.7
-

85
3.3-4.5
1.8-2.4
5.1
4.3
27
26
3.6
3.0
22
22
2.5
2.1
-

100
3.6-4.8
1.8-2.7
7.3
6.0
32
31
5.1
4.2
26
26
3.6
3.0
22
22

120
3.9-5.4
2.1-2.7
9.9
8.2
35
34
7.0
5.8
31
30
4.9
4.0
26
26

135
3.9-5.7
2.1-3.0
12.9
10.7
39
38
9.0
7.5
34
34
6.3
5.2
30
30

CMH
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V

85
1.2-2.0
1.2-1.5
1.5
1.3
1.1
0.9
0.9
0.9
0.8
0.7
-

100
1.5-2.4
1.2-1.8
2.1
1.8
22
21
1.5
1.4
1.3
1.1
1.0
0.9
-

120
1.8-2.4
1.2-1.8
2.9
2.6
25
24
2.1
1.8
21
20
1.8
1.5
1.5
1.3
-

135
1.8-2.7
1.5-2.0
3.8
3.3
29
28
3.1
2.4
24
24
2.3
2.0
22
22
1.8
1.7
-

150
2.1-2.8
1.5-2.4
4.8
4.3
32
31
3.4
3.0
28
27
3.0
2.6
26
25
2.6
2.0
24
23

170
2.1-3.0
1.5-2.4
6.0
5.1
35
34
4.3
3.7
31
30
3.7
3.2
29
28
3.1
2.7
27
26

205
2.4-3.3
1.8-2.4
8.7
7.3
39
38
6.1
5.4
36
36
5.4
4.6
34
33
4.6
3.6
32
31

235
2.4-3.6
2.1-2.6
11.2
10.2
45
43
8.3
7.3
41
40
7.3
6.3
39
38
6.4
5.3
38
37

LTD-S-S (1200mm)

Inlet Size (mm)

100

Throw (m)
Tot. Press.
(mmAq)
NC

125

Tot. Press.
(mmAq)
NC

150

Tot. Press.
(mmAq)
NC

200

Tot. Press.
(mmAq)
NC

Throw is based on terminal velocities of 0.5m/s and 0.25m/s respectively.


NC value is based on room absorption of 10dB, re 10 -12 watts.
Dash (-) indicates NC less than 20.
H indicates horizontal throw, V indicates vertical throw.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
LTD page 2 of 4

CEILING DIFFUSERS
LTD Light Troffer Diffuser
Performance Data for LTD
LTD-D-S (600mm)

Inlet Size (mm)

100

Throw (m)
Tot. Press.
(mmAq)
NC

125

Tot. Press.
(mmAq)
NC

150

Tot. Press.
(mmAq)
NC

CMH
H
V
H
V
H
V
H
V
H
V
H
V
H
V

85
1.2-2.1
1.2-1.5
1.6
1.4
1.1
0.9
0.8
0.7
-

100
1.5-2.4
1.2-1.8
2.4
2.2
21
20
1.8
1.5
1.2
1.0
-

120
1.8-2.7
1.5-2.1
3.5
3.4
26
25
2.5
2.2
21
20
1.8
1.5
21
20

135
2.1-3.0
1.5-2.1
4.8
4.6
30
29
3.5
2.9
25
24
2.4
2.0
25
24

150
2.1-3.3
1.5-2.4
7.9
6.0
34
33
4.5
3.8
29
28
3.1
2.7
29
28

170
2.4-3.6
1.8-2.4
9.7
9.3
40
39
7.0
6.0
35
34
4.9
4.2
35
34

190
2.7-3.9
1.8-2.7
11.9
11.1
43
42
8.4
7.2
38
37
5.9
5.0
38
37

205
2.7-3.9
2.1-2.7
14.0
13.7
45
44
10.1
8.5
41
39
7.1
6.0
41
39

CMH
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V

135
0.6-1.2
0.6-0.9
4.1
2.2
27
21
2.2
1.3
1.8
1.0
1.1
0.7
-

170
0.9-1.5
0.6-0.9
6.5
3.4
33
27
3.5
2.1
23

205
0.9-1.5
0.9-1.2
9.4
5.0
38
32
5.0
3.0
29
24
3.9
2.4
24
22
3.1
1.8
-

235
1.2-1.8
0.9-1.2
12.6
6.7
42
37
8.8
4.1
33
29
5.3
3.3
29
26
3.4
1.9
23
-

270
1.2-1.8
0.9-1.2
16.5
8.8
46
40
9.0
5.4
37
32
6.9
4.3
32
29
4.3
2.4
29
24

305
1.5-2.1
0.9-1.5
21.4
11.4
49
44
11.4
6.9
40
36
9.0
5.4
36
33
5.6
3.2
32
28

340
1.5-2.1
0.9-1.5
25.9
13.6
53
47
14.1
8.5
43
39
11.0
6.7
39
36
6.9
3.9
35
31

370
1.5-2.1
1.2-1.5
30.4
16.1
55
49
17.1
10.5
46
42
13.7
8.3
42
39
8.6
5.0
38
33

LTD-D-S (1200mm)

Inlet Size (mm)

100

Throw (m)
Tot. Press.
(mmAq)
NC

125

Tot. Press.
(mmAq)
NC

150

Tot. Press.
(mmAq)
NC

200

Tot. Press.
(mmAq)
NC

2.7
1.7
1.7
0.9
-

Throw is based on terminal velocities of 0.5m/s and 0.25m/s respectively.


NC value is based on room absorption of 10dB, re 10 -12 watts.
Dash (-) indicates NC less than 20.
H indicates horizontal throw, V indicates vertical throw.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
LTD page 3 of 4

CEILING DIFFUSERS
LTD Light Troffer Diffuser
Performance Data for LTD
LTD-D-T (600mm)

Inlet Size (mm)

100

Throw (m)
Tot. Press.
(mmAq)
NC

125

Tot. Press.
(mmAq)
NC

150

Tot. Press.
(mmAq)
NC

CMH
H
V
H
V
H
V
H
V
H
V
H
V
H
V

85
1.2-2.1
1.2-1.5
1.4
1.3
1.0
0.9
0.7
0.6
-

100
1.5-2.4
1.2-1.8
2.2
2.0
23
22
1.6
1.4
1.1
1.0
-

120
1.8-2.7
1.5-2.1
3.1
3.1
28
27
2.3
2.0
23
22
1.6
1.4
23
22

135
2.1-3.0
1.5-2.1
4.3
4.2
32
31
3.1
2.6
27
26
2.2
1.8
27
26

150
2.1-3.3
1.5-2.4
7.1
5.4
36
35
4.1
3.5
31
30
2.9
2.4
31
30

170
2.4-3.6
1.8-2.4
8.8
8.4
42
41
6.4
5.4
37
36
4.5
3.8
37
36

190
2.7-3.9
1.8-2.7
10.8
10.1
45
44
7.7
6.5
40
39
5.4
4.6
40
39

205
2.7-3.9
2.1-2.7
12.8
12.4
47
46
9.2
7.7
43
41
6.4
5.4
43
41

CMH
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V
H
V

135
0.6-1.2
0.6-0.9
3.7
2.0
28
22
2.0
1.2
1.6
0.9
1.0
0.6
-

170
0.9-1.5
0.6-0.9
5.9
3.1
34
28
3.1
1.9
24
2.5
1.5
1.5
0.9
-

205
0.9-1.5
0.9-1.2
8.5
4.5
39
33
4.6
2.7
30
25
3.6
2.2
25
23
2.8
1.6
-

235
1.2-1.8
0.9-1.2
11.5
6.1
43
38
8.0
3.7
34
30
4.8
3.0
30
27
3.1
1.7
24
-

270
1.2-1.8
0.9-1.2
15.0
8.0
47
41
8.2
4.9
38
33
6.3
3.9
33
30
3.9
2.2
30
25

305
1.5-2.1
0.9-1.5
19.5
10.4
50
45
10.4
6.3
41
37
8.2
4.9
37
34
5.1
2.9
33
29

340
1.5-2.1
0.9-1.5
23.5
12.4
54
48
12.8
7.7
44
40
10.0
6.1
40
37
6.3
3.6
36
32

370
1.5-2.1
1.2-1.5
27.6
14.6
56
50
15.6
9.5
47
43
12.5
7.6
43
40
7.8
4.5
39
34

LTD-D-T (1200mm)

Inlet Size (mm)

100

Throw (m)
Tot. Press.
(Pa)
NC

125

Tot. Press.
(Pa)
NC

150

Tot. Press.
(Pa)
NC

200

Tot. Press.
(Pa)
NC

Throw is based on terminal velocities of 0.5m/s and 0.25m/s respectively.


NC value is based on room absorption of 10dB, re 10 -12 watts.
Dash (-) indicates NC less than 20.
H indicates horizontal throw, V indicates vertical throw.

LTD Order Code Unit:mm


Model
LTD

No. Sided
S-Single
D-Double

Inlet Location
S-Side
T-Top

Nominal Inlet Diameter


100mm, 125mm,
150mm, 200mm

Round/Oval Inlet
O-Oval
R-Round

Width W

Length L

Varies

Varies

Example: LTD-D-S-200mm-O-600mmX1200mm

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
LTD page 4 of 4

CEILING DIFFUSERS ACCESSORIES


C1 Radial Fan Blade Damper
Materials

0.6mm SPGC galvanized steel.

Surface Finish

Matt black.
The products consists of a fan type radial
opposed blade damper.

Standard Sizes

150, 200, 250, 300, 350 (mm).

C3 Deflector Guide Vane


Materials

0.6mm SPGC galvanized steel.

Surface Finish

Matt black.
For volume control & air equalizing.

Standard Sizes

200, 250, 300, 350 (mm).

G1 Opposed Blade Damper


Materials

G1-T: frame 0.6mm SPGC galvanized steel.


Blade 0.5mm SPGC galvanized steel.

Surface Finish

G1-T Matt black as standard.


Maximum dimension is 500mm x 500mm damper
size bigger than this will come in sections.
Gear operated, can be set at fully open,
half open & fully close.

D2 Square to Round Adapter


Materials

D2-T: 0.6mm SPGC galvanized steel.

Surface Finish
Matt black.

Standard Sizes
D2-T: Made to suit.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CEILING DIFFUDER ACCESSORIES page 1 of 3

CEILING DIFFUSERS ACCESSORIES


C2 Crown Damper
Materials

0.6mm thickness galvanized steel.

Surface Finish
Matt black.

Features

Six blades can be adjusted to control the damper opening without


using any tools.
Maximum effective (free) area percentage.
Low noise level.
Uniform air flow pattern.
Standard C2 installation has blades bending upwards, installation of
C2 can be inverted upon request.

Standard Sizes

150, 200, 250, 300 (mm)

Construction Illustrations

60

Top View

Side View

Fully Close

Fully Open

Comparison Of Radial Blade Damper And Crown Damper

Ceiling diffuser adapter with radial blade damper, which air


flow is concentrated in the center of the diffuser.

Ceiling diffuser adapter with crown damper (C2), which air


flow has been distributed to every corner of the diffuser.

Crown damper has more free area and distributes air more uniformly compare to radial blade damper. This is to ensure that the supplied air is
distributed uniformly to the occupant zone and reduces noise level at the same time. Please refer to the diagrams above.

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CEILING DIFFUDER ACCESSORIES page 2 of 3

CEILING DIFFUSERS ACCESSORIES


Recommended Noise Criteria for Rooms (3)
Type of Area

Range of NC
Criteria Curves

RESIDENCES
Private homes (rural and suburban)
Private homes (urban )
Apartment houses, 2-and 3-family units

20-30
25-35
30-40

HOTELS
Individual rooms or suites
Ballrooms, banquet rooms
Halls and corridors, lobbies
Garages
Kitchens and laundries

30-40
30-40
35-45
40-50
40-50

HOSPITALS AND CLINICS


Private rooms
Operating rooms, wards
Laboratories, halls and corridors
Lobbies and waiting rooms
Washrooms and toilets
OFFICES
Board room
Conference rooms
Executive office
Supervisor office, reception room
General open offices, drafting rooms
Halls and corridors
Tabulation and computation
AUDITORIUMS AND MUSIC HALLS
Concert and opera halls
Studios for sound reproduction
Legitimate theaters, multi-purpose halls
Movie theaters, TV audience studios
Semi-outdoor amphitheaters
Lecture halls, planetarium
Lobbies

25-35
30-40
35-45
40-50
20-30
25-35
30-40
30-45
35-45
35-50
40-60
40-50
15-25
25-30
30-35
35-45

Range of NC
Criteria Curves

Type of Area
CHURCHES AND SCHOOLS
Sanctuaries
Libraries
Schools and classrooms
Laboratories
Recreation halls
Corridors and halls
Kitchens

20-30
30-40
30-40
35-45
35-50
35-50
40-50

PUBLIC BUILDINGS
Public libraries, museums, court rooms
Post office, general banking areas, lobbies
Washrooms and toilets

30-40
35-45
40-50

RESTAURANTS, CAFETERIAS, LOUNGES


Restaurants
Cocktail lounges
Night clubs
Cafeterias

35-45
35-50
35-45
40-50

STORES, RETAIL
Clothing stores
Department stores (upper floors)
Department stores (main floor)
Small retail stores
Supermarkets

35-45
40-50
40-50

SPORTS ACTIVITIES, INDOOR


Coliseums
Bowling alleys, gymnasiums
Swimming pools

30-40
35-45
35-45

TRANSPORTATION (RAIL, BUS, PLANE)


Ticket sales offices
Lounges and waiting rooms

30-40
35-50

All stated specifications are updated at the printing date and subject to change without notice or obligation. The actual product might differ from pictures shown.
CEILING DIFFUDER ACCESSORIES page 3 of 3

Das könnte Ihnen auch gefallen