Beruflich Dokumente
Kultur Dokumente
November 2013
Analyzer Update
1 In this version
This release contains support for new and updated file formats. There are updates for most
technologies that Actix supports, with changes falling under the following categories:
Added support for Rohde & Schwarz UMTS scanner in Swissqual file
format.
Added support for Hisilicon chipset (LTE only) in TEMS file format.
Platform improvements:
An issue has been fixed that could cause Analyzer to hang when
loading Swissqual files in a Spotlight Project when multi-threading
functionality is enabled.
Added support for Double Byte Character Set (DBCS) in the search
for cell feature.
Documentation:
None.
Known issues:
None.
November 2013
In GSM, an issue has been fixed that caused Analyzer to set inconsistent
values decoded from the RR System Information Type 3 message.
In VoLTE, a problem has been resolved that prevented Analyzer from
setting correct values for the MOS attributes.
An issue has been fixed that prevented Analyzer from loading some
Cosmos Monitor log files.
In GSM, support was added for C/I in iPhone4S log files. Related
attributes are: ServC2I and C2I_by_ARFCN.
A problem has been resolved that prevented Analyzer form setting
several UMTS attributes (RSCP, EcN0, etc.) in Ding Li CQT log files.
November 2013
Issue: The Carrier Aggregation attributes are not set correctly when
LTFM is enabled.
November 2013
2.8 IP support
In VoLTE, a problem has been fixed that could cause the IP direction
attribute to be set incorrectly for SIP and RTP packets, causing
important attributes such as packet loss and jitter to be missing.
In VoLTE, we now set a new attribute, VoIP_Session_ID, in order to
uniquely identify a VoIP call (SIP and RTP messages). If both MT and
MO calls are logged, this attribute will be the same for both sides
(Calling and Called UEs).
In VoLTE, we added IPv6 support for the attributes listed below:
FTP_DataTransfer_MobilePort
TCP_Data_Packet
TCP_AcknowledgeNumberDL_Stalled_Event
TCP_InterPacketDelayDL_Data
TCP_Relative_AcknowledgeNumberDL_Data
TCP_Relative_AcknowledgeNumberUL_Data
TCP_Relative_SequenceNumberDL_Data
TCP_Relative_SequenceNumberUL_Data
2.9 Generic
A problem has been resolved that caused Analyzer to detect false LTE
call drops in case the UE is instructed to report the CGI information to
the eNodeB.
An issue has been fixed that could cause Analyzer to detect false LTE
drops when a CDMA Idle protocol message occurs.
None.
4 Platform improvements
An issue has been fixed that could cause Analyzer to hang when loading
Swissqual files in a Spotlight Project when multi-threading
functionality is enabled.
Added support for Double Byte Character Set (DBCS) in the search for
cell feature.
November 2013
5 Documentation
None.
The content of this manual is provided for information only, is subject to change without notice, and
should not be construed as a commitment by Actix. Actix assumes no responsibility or liability for any
errors or inaccuracies that appear in this documentation.
Copyright Actix 2013. All rights reserved. All trademarks are hereby acknowledged.
November 2013
US:
AE
AU
BR
CN:
DE:
HK:
JP:
SG:
UK:
Support
+44 (0)20 8735 6303