Beruflich Dokumente
Kultur Dokumente
Properties
Appearance:
Specific gravity:
Chloride content:
Air entrainment:
Alkali content:
Brown liquid
o
Typically 1.17 at 20 C
Nil to BS 5075
Typically less than 2% additional air
is entrained at normal dosages.
Typically less than 5.0 g. Na2O
equivalent/liter of admixture. A fact
sheet on this subject available.
Compatibility
Conplast WP20 is compatible with other Fosroc admixtures in
the same concrete mix. All admixtures should be added to the
concrete separately and must not be mixed together prior to
addition. The performance of concrete containing more than
one admixture should be assessed by trial mixes.
Standard compliance
Conplast WP20 complies with ASTM C494 as Type A.
Description
Conplast WP20 is a chloride free waterproofing admixture
based on selected modified lignosulphonates It is supplied as
a brown solution which instantly disperses in water
ConpIast WP20 reduces the permeability of concrete by
acting as a water-reducing admixture allowing lower
water/cement ratios to be achieved.
Technical Support
Fosroc provides a technical advisory service for on-site
assistance and advice on mix design. admixture selection,
evaluation trials and dispensing equipment.
Dosage
The normal dosage of Conplast WP20 is 0.5 litre/100 kg of
cementitious material including PFA GGBFS and microsilica.
For added performance the dosage can be increased to 0.8
litres/100 kg of cementitious material
Use at other dosages
Dosages outside the normal ranges quoted above can be
used if necessary and suitable to meet particular mix
requirements. Compliance with requirements must be
assessed through trial mixes. Contact Fosroc for advice in
these cases.
Precautions
Health and safety
Conplast WP20 should not be swallowed or allowed to
come into contact with skin and eyes.
Suitable protective gloves and goggles should be worn
Splashes on the skin should be removed with water in
case of contact with eyes rinse immediately with plenty of
water and seek medical advice. It swallowed seek medical
attention immediately - do not induce vomiting.
For further information consult the Material Safety Data
Sheet available for this product.
Fire
Conplast WP20 is water based and non-flammable
Cleaning and disposal
Estimating - packaging
Conplast WP20 is available in drum or bulk supply.
For larger users storage tanks can be supplied.
Storage
Conplast WP20 has a minimum shelf life of 12
months provided the temperature is kept within the
range of 2oC to 50oC should the temperature of the
product fall outside this range then contact Fosroc
for advice.
Jeddah Showroom
Dammam
Yanbu
Medinah
Head Office & Factory
Important note: Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of
sale, copies of which may be obtained on request. Whist Fosroc endeavors to insure that any advice, recommendation, specification or information it may give
is accurate and correct, it cannot, because it has no direct or continuous control over where how its products are applied, accept any liability either directly or
indirectly arising from the use of its products, whether or not in accordance with any advice, specification, recommendation or information given by it
SAU/T1 CPWP20/95/A