Beruflich Dokumente
Kultur Dokumente
ON
PROTECTED CULTIVATION IN HARYANA
BY
NATIONAL BANK FOR AGRICULTURE DEPARTMENT OF HORTICULTURE
AND RURAL DEVELOPMENT
GOVERNMENT OF HARYANA
HARYANA REGIONAL OFFICE
PANCHKULA
CHANDIGARH
DEPARTMENT OF HORTICULTURE
Government of Haryana
2012
CONTENTS
______________________________________________________________________________________
Description
Page No.
______________________________________________________________________________________
1.
2.
3.
I.
II.
III.
IV.
V.
VI.
16-25
26-35
36-44
45-52
53-58
59-65
1. PROTECTED CULTIVATION
1.1 BACKGROUND
Protected cultivation practices can be defined as a cropping technique wherein the micro climate
surrounding the plant body is controlled partially or fully as per the requirement of crops grown
during their period of growth. With the advancement in horticulture various types of protected
cultivation practices suitable for a specific type of agro-climatic zone have emerged. Among
these protective cultivation practices, poly green house, net house, shade house, plastic tunnel
& mulching etc. are very useful for Haryana State. Protected cultivation under different types of
structures save plants from winter and extends the cultivation session for off-season crop
production. In Haryana state, commercially protected cultivation started after the launching of
National Horticulture Mission and has taken a boost after the setting up of Centre of Excellence
for Vegetables at Gharaunda in District Karnal under Indo-Israel Project during last year. In view
of climate of Haryana State, naturally ventilated poly houses are very suitable and have good
economics as compared to High-tech poly houses. Walk-in-Tunnels, a type of poly house with
less height also proved effective technology particularly for the cultivation of capsicum crops.
Low-tunnels have gained its popularity for the crops grown in winter season. The farmers have
started adoption of mulching to eradicate the problem of weeds and to maintain the moisture of
soil for prolonged period through minimization of evaporation losses.
1.2 Why Green house & Poly house Cultivation?
After the advent of green revolution, more emphasis is laid on the quality of the agricultural
product along with the quantity of production to meet the ever-growing food and nutritional
requirements. Both these demands can be met when the environment for the plant growth is
suitably controlled. The need to protect the crops against unfavourable environmental
conditions led to the development of protected agriculture. Greenhouse is the most practical
method of achieving the objectives of protected agriculture, where natural environment is
modified by using sound engineering principles to achieve optimum plant growth and yield. Poly
house cultivation has become an important policy of Indian Agriculture. Our country is self
dependent on food grain production but to fulfill the nutritional security, the gap between
increasing demand of horticultural produce has to be filled. This gap cannot be filled by the
traditional horticulture which required large area under horticulture to increase the production
for the ever growing population. Green house technology has potential to produce more
produce per unit area with increased input use efficiency. Therefore, this problem can be coped
up by adopting green /poly house technology for the horticultural production. For example if
one lakh hectare area under vegetable cultivation is brought out under poly house cultivation
the annual availability of vegetable will be increased by at least 100 lakh tons. Besides this it will
also increase the significant jobs opportunity for the skilled rural men, youths and rural women.
Total production of vegetables in India is next to China, but per capita availability of vegetables is
much lower than required. The productions of vegetable crops are to be increased to meet the
demand of the ever growing population otherwise per capita availability of vegetables will
further go down. There is lot of pressure on cultivable land caused due to industrialization,
urbanization and expansion of the rural villages. Therefore, it is utmost necessary to improve the
productivity of crops including vegetables by adopting intensive cultivation, hydroponics and
poly house cultivation. Adopting poly house cultivation the productivity of vegetable crops can
be increased by 3-5 times as compared to open environment. Besides productivity, the better
quality of produce is also obtained under poly house cultivation. This technology can be adopted
by the rural youth for more income per unit of land. The improvement in economy of farmers
1
with the decreasing land holding is also possible through the protected cultivation by increasing
production per unit area. The glut of vegetable during a short period of harvesting is also the
problem in the country which can be minimized with the protected cultivation as harvesting
period of crops under protected structures is longer.
2. ASPECTS OF GREENHOUSE CULTIVATION
The design and specification for poly house are based on the following aspects I.
Classification of greenhouse
II. Design and Orientation of Greenhouse / Polyhouse
III. Components of green house
IV. Plant growing structures/containers in green house production
V. Environmental factors influencing greenhouse cultivation
VI. Fan and Pad system
VII. Media preparation and fumigation
VIII. Drip irrigation and fertigation systems
IX. Problem management in greenhouse cultivation
X. Linkages Backward and Forward
I. CLASSIFICATION OF GREENHOUSE/POLYHOUSE
Greenhouses are frames of inflated structure covered with a transparent material in which crops
are grown under controlled environment conditions. Greenhouse cultivation as well as other
modes of controlled environment cultivation has been evolved to create favourable microclimates, which favours the crop production could be possible all through the year or part of the
year as required. Greenhouses and other technologies for controlled environment plant
production are associated with the offseason production of ornamentals and foods of high value
in cold climate areas where outdoor production is not possible. The primary environmental
parameter traditionally controlled is temperature, usually providing heat to overcome extreme
cold conditions. However, environmental control can also include cooling to mitigate excessive
temperatures, light control either shading or adding supplemental light, carbon dioxide levels,
relative humidity, water, plant nutrients and pest control.
A.
disturbance against wind. Exhaust fans with thermostat are provided to control the
temperature. Evaporative cooling pads and misting arrangements are also made to
maintain a favourable humidity inside the greenhouse. As these systems are semiautomatic, hence, require a lot of attention and care, and it is very difficult and
cumbersome to maintain uniform environment throughout the cropping period. These
greenhouses are suitable for dry and composite climatic zones.
c. Hi-tech greenhouse: To overcome some of the difficulties in medium-tech greenhouse, a
hi-tech greenhouse where the entire device controlling environment parameters are
supported to function automatically.
B. Classification based on Cost of polyhouses
a. Less expensive greenhouse without fan and pad Rs.300 to 600/m2
b. Medium cost greenhouse with natural ventilation without fan and pad system
Rs.800.00 to Rs.1100.00/m2
c. Expensive greenhouses with fully automatic Rs.1465 to Rs.4000/m2 control system
C. Other classifications
The greenhouse can also be classified based on type of structures, type of glazing, number of
spans, environmental control etc. The various types are as follows.
I.
II.
III.
IV.
V.
Classification based on types Poly house:
The crops grown in open field are exposed to vivid environmental conditions, attack of insects
and pests, whereas the polyhouse provides a more stable environment. Polyhouse can be
divided in to three types a. Naturally ventilated polyhouse- These polyhouse do not have any environmental control
system except for the provision of adequate ventilation and fogger system to prevent
basically the damage from weather aberrations and other natural agents.
3
b. Environmental controlled polyhouse This type of polyhouse helps to extend the growing
season or permits off-season production by way of controlling light, temperature,
humidity, carbon-dioxide level and nature of root medium.
c. Shade house- Shadehouses are used for the production of plants in warm climates or during
summer months. Nurserymen use these structures for the growth of hydrangeas and
azaleas during the summer months. Apart from nursery, flowers and foliages which require
shade can also be grown in shadehouses. E.g. Orchids, These shade structures make
excellent holding areas for field-grown stock while it is being prepared for shipping to retail
outlets. Shadehouses are most often constructed as a pole-supported structure and
covered with either lath (lathhouses) or polypropylene shade fabric. Polypropylene
shadenets with various percentages of ventilations are used. Black, green, and white
coloured nets are used, while black colours are the most preferred as it retains heat
outside.
II. DESIGN AND ORIENTATION OF GREENHOUSE/POLYHOUSE
The design of greenhouse should be based upon sound scientific principles which facilitates
controlled environment for the plant growth. Controlled environment plant production systems
are used widely throughout the world to produce plant materials and products at a time or
place, or of a quality that cannot be obtained outdoors.
Controlled environment agriculture requires far more capital investment per unit area than field
agriculture and thus must essentially be correspondingly more intensive to justify investment
costs. The greenhouse is a structure covered with a transparent material for admitting natural
light for plant growth. The main components of greenhouse like structure, covering/glazing and
temperature control systems need proper design for healthy growth of plants. Under Indian
conditions, Quonset type, multispan greenhouse is most suitable, because of its low cost and
eases of fabrication. Ultra violet resistant low density polyethylene (UVLDPE) single film cladding
of 200 micron thickness is sufficient for Naturally Ventilated ( NV) greenhouse and fan and pad
(FP) greenhouses. This should be fully tightened by stretching on the structure to avoid fluter
and tearing. It should not be nailed or screwed to the structure as it gives the chance for tearing.
The T-Lock and L-Lock should be used for fastening the sheet at structure, as this does not tear
the sheet and sheet replacement is easy.
A. Design
The structure has to carry the following loads and is to be designed accordingly.
a) Dead load: weight of all permanent construction, cladding, heating and cooling equipment,
water pipes and all fixed service equipments to the frame.
b) Live load: weights superimposed by use (include hanging baskets, shelves and persons
working on roof). The greenhouse has to be designed for a maximum of 15 kg per square
meter live load. Each member of roof should be capable of supporting 45 kg of
concentrated load when applied at its centre.
c) Wind load: The structure should be able to withstand winds of 110 Km/hr and at least 50
kg/m2 of wind pressure.
d) Snow load: These are to be taken as per the average snowfall of the location. The
greenhouse should be able to take dead load plus live load or dead load plus wind load
plus half the live load.
4
The greenhouses are to be fabricated out of Galvanized Iron Pipes. The foundation can be
60cmx60cmx60cm or 30 cm diameter and one meter depth in PCC of 1:4:8 ratio. The vertical
poles should also be covered to the height of 60 cm by PCC with a thickness of 5cm. This avoids
the rusting of the poles
B. Orientation
Orientation of the greenhouse is a compromise for wind direction, latitude of location and type
of temperature control. Single greenhouses with latitude above 40N should have ridge running
east to west to allow low angle light to enter from side rather than ends. Below 40N the ridge of
single greenhouses should be oriented from north to south, since the angle of sun is much
higher. This orientation permits the movement of shadow of the gutter across the green house.
The location and orientation of the greenhouse should avoid falling of shadow on the adjacent
greenhouses. To avoid the shading effect from one green house to another greenhouse these
should be oriented East to West. However, the wind direction and latitude are also to be
considered.
a.
Wind effects:If the greenhouse is naturally ventilated, the advantage of natural wind
direction has to be taken to the maximum possible. The maximum dimension (length) of
greenhouse should be perpendicular to the wind direction especially in summer. For fan
and pad greenhouse the natural wind direction should be same as the air blown by fan.
b.
Size of the greenhouse:The dimension of NAV GH should not be more than 50m x 50m.
Bigger the greenhouse more will be the temperature build up due to poor ventilation.
The length of evaporative cooled greenhouse should not be more than 60m.
c.
Spacing between greenhouses:The spacing between naturally ventilated green houses
should be 10 to 15 m so that the exhaust from one greenhouse should not enter the
adjacent greenhouse.
d.
Height of greenhouse:The maximum height can be up to 5m for 50m x 50m green house
and this can be reduced as per the reduced size of the green house. Higher is the
greenhouse more is the wind load for structure and glazing. The side ventilation can be of
2 m width and roof ventilation is 1m in width.
e.
Structural design:The greenhouses are to be designed for necessary safety, serviceability,
general structural integrity and suitability. The structure should be able to take all the
necessary dead, live, wind and snow loads. The foundation, columns and trusses are to
be designed accordingly. The greenhouse structures are to be designed to take up the
loads as per design loads prescribed by the National Greenhouse Manufactures
Association (NGMA of USA) standards 1994.
III. COMPONENTS OF GREENHOUSE
Roof: transparent cover of a green house.
Gable: transparent wall of a green house
Cladding material: transparent material mounted on the walls and roof of a green house.
Rigid cladding material: cladding material with such a degree of rigidity that any
deformation of the structure may result in damage to it. Ex. Glass
v.
Flexible cladding material: cladding material with such a degree of flexibility that any
deformation of the structure will not result in damage to it. Ex. Plastic film
vi.
Gutter: collects and drains rain water and snow which is place at an elevated level
between two spans.
vii.
Column: vertical structure member carrying the green house structure
viii. Purlin: a member who connects cladding supporting bars to the columns
ix.
Ridge: highest horizontal section in top of the roof
x.
Girder: horizontal structure member, connecting columns on gutter height
i.
ii.
iii.
iv.
xi.
xii.
xiii.
xiv.
xv.
xvi.
Cladding material: Polythene proves to be an economical cladding material. Now long lasting,
unbreakable and light roofing panels-UV stabilized clear fiber glass and polycarbonate panels are
available. Plastics are used in tropical and sub-tropical areas compared to glass/fiberglass owing
to their economical feasibility. Plastics create enclosed ecosystems for plant growth. LDPE (low
density polyethylene) / LLDPE (linear low density polyethylene) will last for 3-4 years compared
to polythene without UV stabilizers.
Comparison of different kinds of covering materials:
Sr
No.
1
2
3
4
5
6
Type
Polyethylene
Polyethylene UV resistant
Fiber glass
Tedlar coated Fiber Glass
Double strength glass
Poly carbonate
Durability
(year)
01
02
07
15
50
50
Transmission
Light (%)
Heat (%)
90
70
90
70
90
05
90
05
90
05
90
05
Maintenance
Very high
High
Low
Low
Low
Very Low
V.
Plants need an optimum temperature for maximum yield and quality. The greenhouse in plain
and coastal region of India needs cooling. The greenhouses in mild climates and coastal region
can be naturally ventilated. The greenhouses for hot summer climates of northern plains have to
evaporative cooled or with fan and pad (FP). The greenhouses for northern plains may require
both cooling and heating depending on the crop.
A. Natural ventilation: The greenhouse has to be thoroughly ventilated for control of
temperature. It should be noticed that the temperature built up in the greenhouse is not
exceeding 2C throughout the year. Further during hot months the temperature in the
greenhouse was same as the ambient temperature.
B. Unconventional method of heating and cooling
a) Hot and cold water can be sprinkled on the greenhouse covered externally with
shadenet
b) Use of earth tunnel for cooling in summer and heating in winter
c) Construction of greenhouse in a trench for heating in winter cooling in summer
d) Circulating the borewell water in pipes laid on the floor of the greenhouse
the
C. Heating of greenhouse: The heating of greenhouses in cold climates like winter in North India
or Himalayan Region at high altitudes is advisable for getting better produce. Double covering
of glazing with an air cushion of 2 cm to 10 cm reduces the heating load considerably.
D. Heating systems: These can be of the following types
a. Boiler: This system is used for very big greenhouses and is a centralized system of
heating. The boiler of necessary capacity is provided in the greenhouse. The fuel for
boiler can be coal or fuel oil. The heating of the greenhouse is generally done through hot
water at 85C or steam at 102C. Water or steam pipes are installed above the beds of
crop and along the side wall. The steam system is cheaper than hot water system. To
reduce the length of pipe to be used a number of hot water or steam pipe coils can be
used and green house air circulated over them by blower for heating.
b. Unit heaters: These are localized system of heating and a number of unit heaters are to
be provided in the greenhouse at a height of about 3 meter to distribute heat evenly in
the greenhouse. In a unit heater the fuel is combusted in the chamber at bottom. Hot
fumes rise inside the heat exchanger tubes, giving heat to the walls of the tubes. Smoke
exists at the top. A fan forces cool air of the greenhouse over the outside of heat
exchange tubes, where it picks up heat.
c. Infra-red heaters: The fuel gas (LPG) is burnt and the fumes at a temperature of about
480C are passed in 10 cm diameter pipes kept overhead at a height of 1.5m above
plants. Reflectors are provided over the full length of pipe to radiate the infra red rays
over the plants. The plants and soil only get heated without much heating of air. The infra
red heating pipes can be provided at 6 to 10 meters interval all along the length of
greenhouse. The temperature of fume gases at exist is about 65C and exhaust fan is
provided for maintaining the flow of fumes.
d. Solar heating: Flat plate solar heaters are used to heat the water during day time. The hot
water is stored in the insulated tanks. The hot water is circulated in pipes provided along
the length of the greenhouse during night. Supplementary or emergency heating systems
are provided for heating the greenhouse during cloudy or rainy days.
7
E. Environmental control:
a. Temperature control: The thermostat can be coupled to water circulating pump or
exhaust fan for controlling the temperature inside the greenhouse. However, the lowest
achievable temperature in fan and pad greenhouse is not below the wet bulb
temperature in any case.
b. Relative humidity control: The humidistat coupled to water circulating pump or exhaust
fan to control the relative humidity inside the fan and pad greenhouse. The maximum
achievable relative humidity is 90% only in fan regulated (FR) greenhouse. The RH in Non
ventilated (NV) GH can be increased by providing foggers.
c. Light intensity control: In certain areas where natural illumination is absent or very low,
illumination for plants may be provided by artificial sources. Incandescent bulbs generate
excessive heat and are unsatisfactory in most instances. Fluorescent tubes are useful as
the sole source of light for African violets, gloxinias and many foliage plants which grow
satisfactorily at low light intensities. Excessive light intensity destroys chlorophyll even
though the synthesis of this green pigment in many plants is dependent upon light.
Chrysanthemum is a classic example for a short-day plant; however, flower buds will not
form unless the night temperature is high enough. Chrysanthemum is flowered on a yearround basis as a cut flower or potted plant simply by controlling the length of day and
temperature.
d. Quality of light: Quality of light refers to its wave-length composition. Light in the orangered portion of the visible spectrum from either sunlight or artificial illumination is most
effective in causing the long-day response in plants. Far-red radiation appears to have the
opposite effect. It is probable that the wave lengths activate some hormonal mechanism
within the plant which brings about the specific effect of light on growth or flowering.
VI. FAN AND PAD SYSTEM
Selection of fan: The fans should deliver the required air at 15mm static pressure. The
maximum center to center spacing between the two fans should be of 7.5m. The height
of the fans is to be determined based on the plant height which is proposed to be grown
in the greenhouse. The fan blades and frame are to be made of non-corrosive materials
like aluminium/stainless steel.
B.
Design: The cross fluted cellulose pad is preferred. These are available mostly in 100mm
thickness. One meter of pad height is given for every 20m of pad to fan distance.
However, the fan to pad distance should not exceed 60m. The air flow rate should be of
75 cubic meter/minute/sq.m of pad. The water flow rate should be of 9 litres per
minute/linear meter pad. The uniform distribution of water on pad is to be maintained.
C.
Maintenance of pad: The algae will grow and salts will deposit on pads if these are not
maintained properly. Good control of algae can be obtained without using chemicals by
the following methods.
i. By shading the pads and sumps
ii. By drying the pads daily
iii. By avoiding nutrient contamination
iv. By draining and disinfecting the sump regularly
v. By replenishing 20% of circulating water each time to avoid scaling of minerals.
D. Maintenance of fan
i. The lubrication of bearings should be done regularly
ii. The v belt should be tightened as per requirement
iii. The levers should be properly lubricated.
A.
Gravel culture: Gravel culture is a general term which applies to the growing of plants
without soil in an inert medium into which nutrient solutions are usually pumped
automatically at regular intervals. Haydite (shale and clay fused at high temperatures), softor hard-coal cinders, limestone chips, calcareous gravel, silica gravel, crushed granite and
other inert and slowly decomposing materials are included in the term gravel. The more
important greenhouse flowering crops include roses, carnations, chrysanthemums,
gardenias, snapdragons, lilies, asters, pansies, annual chrysanthemums, dahlias, bachelor
buttons and others.
Category
Transplants
Young
plants
foliage plants
Plants in bed
Concentration (mg/l)
N
P
125
10-15
NO3
75
&
K
250-300
50
90
6-10
150-200
125
225
10-15
200-300
Media ingredients and Mix: Commercially available materials like peat, sphagnum moss,
vermiculite, perlite and locally available materials like sand, red soil, common manure/
compost and rice husk can be used in different proportions to grow greenhouse crops.
These ingredients should be of high quality to prepare a good mix. They should be free
from undesirable toxic elements like nickel, chromium, cadmium, lead etc. Pasteurization
of greenhouse plant growing media Greenhouse growing medium may contain harmful
disease causing organisms, nematodes, insects and weed seeds, so it should be
decontaminated by heat treatment or by treating with volatile chemicals like methyl
bromide, chloropicrin etc.
E. Pasteurization of greenhouse plant growing media: Greenhouse growing medium may
contain harmful disease causing organisms, nematodes, insects and weed seeds, so it
should be decontaminated by heat treatment or by treating with volatile chemicals like
methyl bromide, chloropicrin etc.
Sr. No.
1
2
Agent
Heat
Methyl bromide
Chloropicrin
(Tear gas)
Basamid
Formalin
Method
Recommendations
Steam
30 min at 180 F
10 ml/cu. ft. of Cover with gas proof cover for 24-48 hr.
medium
Aerate for 24-28 hr before use.
3-5 ml/cu. ft. of Cover for 1-3 days with gas proof cover
medium
after sprinkling with water. Aerate for 14
days or until no odour is detected before
using.
8.0 g/cu. ft. of Cover for 7 days with gas proof cover and
medium
aerate for atleast a week before use.
20 ml/l of water Apply 2 l/cu.ft. cover for 14 to 36 hr and
(37%)
aerate for at least 14 days.
Rate of application
Effect against
2 g/l of water
10
and quickly becomes chlorotic. The rose flowers are usually very malformed. The stem tip
dies, giving rise to growth of shoots immediately below, which in turn die at the tip, and a
witches broom effect is observed. Because deficiency symptoms can sometimes be
confused with the effects of some other environmental factor of cultural practice, a
thorough review of fertilizer application, soil testing, soil type, watering practices, and
other procedures is warranted before hasty conclusions are reached.
viii. Fertilizer excesses - An unfortunate belief among many growers is that when a plant
does not grow under apparently favorable conditions, the trouble can be overcome by
applications of fertilizer. This practice has resulted in untold damage or loss of crops, as
more often than not the original trouble could have been too much fertilizer in the soil. If
additional fertilizer is applied when no more is needed, the results can be very injurious.
Sometimes the difference between a high but safe nutrient level and an injurious nutrient
level is not very great and the margin of safety may be extremely small. The plants exhibit
heavy, rank growth, with large, dark green leaves that are often crisp and break easily.
Additional nitrogen may inhibit root action, causing typical symptoms of iron chlorosis. If
the root system is killed, the plants wilt excessively and never recover. This yellowing of
the top foliage is very common in chrysanthemums a reduced
X.
A. Procurement of Planting Material: The planting material (seedlings) can be procured from
Centre of Excellence for Vegetables, Gharonda, Panipat, Center for Protected Cultivation,
IARI, New Delhi and HAU, Hisar. The seedlings can also be procured from the private
nursery farms viz. Sabir Biotech, Noida, Agri Nouvas, Kharad, Punjab etc.
B. Transport: Normally, vegetables and flowers immediately after harvest is graded, packed,
and send to market. In context of Haryana, the distance from farm to market is maximum
250-275 Kms from any part of the Haryana which takes around 5-6 hrs to reach the market.
Thus, as such there is no need of precooling or refrigerated van to transport the produce.
C. Marketing:
Haryana being proximity to NCR have ample scope of marketing of fresh
vegetables as the requirement of fresh vegetables has increased manifold. Azadpur Mandi
Market, Delhi a largest vegetable market in Asia which is in vicinity to Haryana. Further, as
per information given by The Haryana State Agricultural Marketing Board (HSAMB), the
specialised fruit and vegetable market having high-tech and ultra-modern infrastructure for
longer preservation of perishable crops is being established at Ganaur in Sonepat distict of
Haryana. Besides, the above Reliance Fresh, Mother Dairy and recently Wall Mart
companies are directly purchase the fresh vegetables from the farmers.
The cut flowers like Rose, Gerbera, Carnation and others are used in preparation of
bouquets, floral arrangements and social occasions. Hence there is huge demand for cut
flowers in domestic as well as in international market.
Financing Aspects
a. Subsidy: The Dept of Horticulture, Govt of Haryana is providing subsidy of 65%, 90% and
50% on cost of polyhouse, irrigation system and planting material respectively. The back
ended subsidy will be provided to financing bank in respect to the beneficiaries
immediately after the release of first instalment of loan. The subsidy admissible to the
borrower under the scheme will be kept in the Subsidy Reserve Fund A/c borrower-wise
in the books of the financing banks.
14
b. Refinance to Banks:The 90% of the amount financed to the borrower under the scheme
by banks will be eligible for the refinance from NABARD.
c. Bank Finance
i. Term Loan: The banks may finance 90% of the project cost as term loan. The eligible
amount of subsidy would also be allowed as term loan.
ii. Margin Money: The entrepreneurs should normally meet 10% of the project cost
out of their own resources.
iii. Interest Rate: Interest rate will be decided by financing banks from time to time.
However, the repayment programme has been worked out at 14% rate of interest.
iv. Security: Banks may obtain security as per RBI norms.
v. Repayment: The principal and interest will be repayable in seven years, with
moratorium of 01 year.
15
16
G. PLANTING MATERIAL
The seedlings of 05-06 weeks old are used for transplanting, depending on temperature and light
conditions during propagation. Ideal seedling size is about 16 cm.
H. VARIETIES/CULTIVARS
The varieties which are preferred for cultivation under polyhouse are
a. Tomato
- By Syngenta - Him Sona, Him Shekha, Insona, 34774 etc.
b. Cherry tomato By Monsento -Olleh, Raisy etc.
Besides the varieties developed by HAU and IARI are also available for protected cultivation
I. MANURES AND FERTILIZERS
Application of nutrients should be based on analysis of soil and plant. However, for the better
crop yield 4 to 5 tonnes of well rotten FYM per unit (1008 m2) should be mixed during soil
preparation. The fertilizer doses of Nitrogen 40-45 kg, Phosphorus (P2O5) and 40-45 kg Potash
(K2O5) may be applied per unit. The half of the dose of Nitrogen and potash and full dose of
phosphorus are incorporated during soil preparation.
J. CULTURAL PRACTICES
Different cultural practices followed in tomatoes are as follows
1. Suckering
Side shoots (suckers) will develop between each compound leaf and the stem. These suckers are
removed as they develop, leaving only the main stem as a growing point. For this reason, side
shoots are usually not pruned until they are a few cm long, and at which time they are easier to
distinguish form the main stem.
2. Crop Support
After transplanting as soon as possible, plant stems should be secured to nylon/plastic (high
density) twine, quality of twine should be ensured. Twines are hung from horizontal wires at
least 3m about the ground. Horizontal wires must be sturdy enough to support the weight of all
plants in the row.
3. Training (Tying):
Plants should be trained as single (main) stem. The plants can be supported with the help of
plastic twine loosely anchored around the base of the plants (non slip loop) at one end. The
same plastic twine is tied to overhead support wires (12 to 16 gauge) running along the length of
the row. Overhead wires should be at least 3m above the surface of beds and should be firmly
anchored to support structures. Tie the plant with the help of plastic twine in inclined position
to the overhead support wires.
Twine should be wrapped clockwise around the plant as it develops, with complete swirl every
three leaves. Plastic twine should not be wrapped around fruit clusters.
When plants reach the overhead supporting wires, unite the twine and lower the vines and
twines at least three feet (once in two weeks). After lowering, vines should lean in one direction
in one row, vines in adjacent row should lean in opposite direction. Be sure to leave at least 4-5
meters of extra twine for this purpose when initially tying wines.
17
4. Mulching
Straw mulch is most common, if Straw mulches are used, apply to the soil when tomatoes are
about two feet high. The mulch reduces evaporation of water from the soil and prevents
compaction of the surface. White (reflective) plastic mulches are recommended to control
weeds, conserve moisture, reduce humidity and improve light conditions also to avoid contact to
soil and prevent diseases.
5. Topping
Six weeks before the anticipated crop termination date, the growing point and small fruit
clusters at the top of the plant are removed this operation is called Topping. Topping is carried
out for fast fruit development and increase size of already-set fruit in the lower part of the plant.
Some shoots at the top are left to grow as it helps to avoid risk of sunburn.
6. Pollination
Tomatoes are self-pollinating under open field conditions. Pollen sheds and fertilization occur as
a function of normal air movement leading to agitation of the plants and flowers. Under green
house conditions, flowers need to be agitated mechanically.
For pollination hand pollination method is used, in this method gently brush your hand on flower
clusters. Timing is important in hand pollination for set fruit i.e. when humidity conditions are
most favorable (50-70%). Pollination is done at least twice a week, inadequate pollination will
lead to misshapen and lower yields.
7. De-leafing
When vines are lowered, leaves touching the ground are removed to prevent disease
development. The amount of de-leafing that occurs higher up the plant varies between growers.
The purpose of de-leafing higher up the plant stem is to increase light penetration and air
circulation. Typically, all leaves are removed below the lowest fruit cluster which has not been
harvested Deleafing also helps to make more carbohydrates available to the fruit trusses,
thereby increasing yield. This operation is carried out in all types of tomatoes.
8. Fruit Pruning
Small, undersized fruit at the end of a cluster (distal fruit) are always removed, as these will
generally not grow to marketable size and are thought to reduce the size of the other fruit on
the cluster.
K. IRRIGATION
Tomato needs to be irrigated at right time. In spring summer, the crop should be irrigated at the
interval of 4-6 days depending upon the growth of plants. Under drip irrigation system measured
quantity of water can be applied. It is best method to optimise plant nutrition without large
fluctuation in the nutrient level in root zone. It minimises losses by fixation or leaching in the soil
thus economically using fertilizers to result in higher yields and improved quality.
L. PLANT PROTECTION
Major insect pest
Tomato fruit worm
Leaf miner
Aphid
18
Major diseases
Bacterial diseases
Fungal diseases
Viral diseases
Physiological disorders
Successful crop production requires that crop pests and diseases be managed so that their
effects on the plants are minimized. The management of crop diseases is directed at preventing
the establishment of diseases and minimizing the development and spread of any diseases that
become established in the crop. Managing pest problems is directed at preventing pest
populations from becoming too large and uncontrollable. The presence of pests and diseases are
a fact of crop production and growers must use all available options and strategies to avoid
serious pest and disease problems.
Integrated pest management (IPM) where cultural, biological, and chemical controls are included
in a holistic approach of pest and disease control may be adopted. Key components of effective
pest and disease control programs include:
sanitation,
crop monitoring,
cultural control,
resistant cultivars,
biological control and chemical control
M. HARVESTING
The harvesting of tomato fruits start from 90 days after transplanting. The total crop period for
tomatoes is 8-9 month after planting. The harvesting is done daily or alternate day depending on
market distance and customer choice. For long distance marketing, the fruits are picked at
matured green or breaker stage. For processing the fully matured red ripe fruits are harvested in
order to optimize the quality parameters. The optimum storage condition of 12oC temperature
and 86 to 90 per cent relative humidity is required for tomatoes.
N. YIELD
Under polyhouse condition from well maintained tomato crop average 30 kg/m 2 or 10 kg/plant
of marketable fruits are obtained.
O. GRADING
Tomatoes should be graded to different classes according to their size and qualities. Grading is
done manually by hand grading method.
P. PACKAGING
After grading fruits are packed in crates/CFB which is best suited for tomato packing. Depending
on the market, the box is either filled with one variety, one grade, or mixed colour one grade.
Q. ESTIMATED COST, MEANS OF FINANCE AND FINANCIAL ANALYSIS
The details of estimated cost, means of finance, economics and financial viability is worked out
for Naturally Ventilated Polyhouse and Walk in Tunnel Polyhouse separately as follows.
19
20
21
22
23
24
25
3. (ii) CAPSICUM
A. INTRODUCTION
Capsicum (Capsicum annum) belongs to the family Solanaceae and is an important member of
chilli group. Green pepper is reported to be the native of tropical America. In India its
introduction is believed to be through the Portuguese. In India it is cultivated commercially in
Tamil Nadu, Karnataka, Himachal Pradesh and in some parts of Uttar Pradesh. In North India, it is
known as "Simla Mirch" and is an important summer crop grown extensively in the mild hills of
Himachal Pradesh to supply to the plains. It is variously called as capsicum, green pepper, sweet
pepper, bell pepper, etc. In shape and pungency it is different from chilli. It is fleshy, blocky, of
various shapes, more like a bell and hence named bell pepper. Almost all the varieties of green
pepper are very mild in pungency and some of them are non-pungent, and as such they can be
used as stuffed vegetable.
B. CLIMATE
Capsicum grown under plolyhouse require following climatic conditions to get good quality and
better yield round the year.
Name of crop
Day (0C)
Night (0C)
Humidity (%)
Capsicum
21-28
18-20
60-65
Light intensity
(Lux)
50000-60000
Higher temperature is detrimental to fruit set. High temperature and low relative humidity at the
time of flowering increases the transpiration pull resulting in abscission of buds, flowers and
small fruits. Moreover, higher night temperatures are found to be responsible for the higher
capsaicin (pungency) content in green pepper.
C. SOIL
Although sweet pepper can be grown in almost all types of soils, well drained clay loam soil is
considered ideal for its cultivation. It can withstand acidity to a certain extent. Levelled and
raised beds have been found more suitable than sunken beds for its cultivation. On sandy loam
soils, the crop can be successfully grown provided the manuring is done heavily and the crop is
irrigated properly and timely. The most suitable pH range of soil for green pepper is 6 to 6.5.
D. BED PREPARATION
A raised bed is always preferred for plantation of capsicum. Bed should be highly porous, well
drained, providing adequate aeration for root development. The raised bed for capsicum
plantation should have following dimensions.
Top width - 100 cm
Path width 90 cm
Height 40 cm
E. PLANTING DISTANCE
Plant to Plant distance: 40 cm
Row to Row distance : 50 cm
F. PLANTING MATERIAL
Other characteristics like fruit shape, fruit colour, production, fruit quality and vigour should also
be considered while selecting plant material of good variety of capsicum.
G. VARIETIES/CULTIVARS
There are a number of varieties of green pepper cultivated in India. The important ones are as
under
California Wonder
Chinese Giant
World Beater
Yolo Wonder
Bharat
There are some other varieties of capsicum such as Early Giant. Bullnose, King of North. Ruby
King, Indra, Bombay, Orobelle etc. which are grown in India under polyhouse.
H. MANURES AND FERTILIZERS
About 4 to 5 tonnes of farmyard manure, 30 to 55 kg of nitrogen in the form of ammonium
sulphate or urea, 50 to 110 kg of phosphorus in the form of super phosphate and 75 to 100 kg of
potash per hectare should be given depending upon the fertility status of the soil. The complete
dose of farmyard manure should be applied in the soil at the time of soil preparation. Potassium
and phosphate fertilizers should be mixed in the plant rows just before transplanting. The
nitrogenous fertilizer is given two and half a month after transplanting.
I. CULTURAL PRACTICES
Some varieties are very vigorous & plant can become as tall as 3.5 m and they produce about 4-5 kgs
fruits on one plant in their life cycle. As stems are weak, they need support system. Plant stem after
transplantation is tied by a high density plastic or nylon string. Twines are vertical ropes that are tied to
horizontal wires on the ceiling at one end and to the crop at another end. Twines of good quality are
used to hang from horizontal wires at least 3 m above the ground. Horizontal wire used should not have
thickness less than 12 gauge, as it supports the weight of all plants in the row. If the wire is weak it will
break and lead to losses. Three rows of over head horizontal wires are required for one bed and for each
single plant four numbers of twines are required.
J. Topping
The growing point at the top of the plant is removed. This operation is called topping. This
technique is adopted for producing more branches. This is practiced after one month period
from transplantation. After topping two or four main leaders are kept where as the lateral
shoots is pinched first leaf (internodes) or second leaf (internodes). One or two fruits per side
shoot are maintained.
K. Training
Generally two system of training are practiced in capsicum cultivation.
i. Two-leader system of training: In this system of training two main shoots are maintained as
two leaders after topping. Side shoots are pinched after one or two pairs of leaves; generally
one fruit is kept per side shoot.
27
ii. Four -leader system: In this system of training four main shoots are maintained as four
leaders after topping. Side shoots are pinched after one or two pairs of leaves; generally one
fruit is kept per side shoot.
L. Fruit thinning
When there are too many fruits on the plant, it is necessary to remove some fruits, to promote
the development of remaining fruits. This operation is called as fruit thinning. Fruit thinning is
done when the fruit is of pea size. This practice is normally followed to increase the size of fruit
thus by increasing the quality of production.
M. Pollination:
Capsicum is self pollinating but there is high degree of cross pollination because of honey bees,
thrips and other insects who transfer pollen from blossom to blossom. Pollination is not
improved by using an "electric bees" or by spraying plant hormones but pollination is clearly
better when honey bees or bumble bees fly in the green house. Bees increase the number of
seeds in capsicum fruits.
N. IRRIGATION
Capsicum needs to be irrigated at right time depending upon the growth of plants. Under drip
irrigation system measured quantity of water can be applied. It is best method to optimise plant
nutrition without large fluctuation in the nutrient level in root zone. It minimises losses by
fixation or leaching in the soil thus economically using fertilizers to result in higher yields and
improved quality.
O. INSECT and DISEASES
a). The important insect pests attacking capsicum
i. Thrips
ii. Aphids
iii. Mites
b). Major Diseases of the capsicum
i. Damping Off
ii. Anthracnose
iii. Powdery Mildew
iv. Bacterial wilt
v.
P. HARVESTING
Harvesting of capsicum is done at green, breaker and coloured (red/yellow etc.) stage. It
depends upon the purpose for which it is grown and distance for the ultimate market. In India
fruits are harvested at break stage for long distant markets. For local market, it is better to
harvest coloured stage. Breaker stage is the one when 10% of the fruit surface is coloured and
when more than 90% of the fruit surface is coloured it is considered as coloured stage.
Harvesting starts after 60 to 75 days after transplanting & should be done with the help of sharp
knife. Harvesting at the proper stage of maturity, careful and minimal handling of the produce
will help in maintaining better fruit quality and reduce storage losses. Harvesting is generally
done during morning and evening hours. Avoid harvesting immediately after fogging to check
the disease and pest under control and to maintain better keeping quality of fruit. Generally,
28
Harvesting of capsicum is done by skilled worker in green house and kept in plastic containers an
send to the packing hall.
Q. YIELD
Average yield of capsicum is 6 to 8 kg/ plant.
R. POST HARVEST MANAGEMENT
i. Cleaning Grading: All damaged, malformed and bruised capsicums should be removed.
Those with dirt adhering to their surface can be cleaned by wiping the surface with a
moist soft cloth. The capsicum should be graded into same size and colour lots according
to market requirements. Sorting is done on the basis of shape and weight of capsicum
ii. Packing: Capsicum is packed in cartons and should hold about 10 kg or 12 kg of capsicum.
Mostly farmers use apple boxes (used ones) for packing capsicum for local market.
An ideal corrugated box carries following information.
iii. Storage
Capsicum can be stored in a cool room at a temperature of 7-10 oC for up to 3 weeks if required.
S. ESTIMATED COST, MEANS OF FINANCE AND FINANCIAL ANALYSIS
The details of estimated cost, means of finance, economics and financial viability is worked out
for Naturally Ventilated Polyhouse and Walk in Tunnel Polyhouse separately as follows.
29
30
31
32
33
34
35
3. (iii) CUCUMBER
A. INTRODUCTION
Cucumber (Cucumis sativus L.) known as Kihra in Hindi is an important summer vegetable
commonly grown throughout India. The cucumber is used as salad, as pickle and also cooked
vegetable. It has a cooling effect, prevents constipation, useful in jaundice and seed have
number of ayurvedic uses.
B. CLIMATE
The cucumber is a warm season crop and grows best at a temperature between 18 0C and 240C.
It does not withstand even light frost.
C. SOIL
Cucumber can be grown in all types of soil from sandy to heavy soils. Loam, silt loam and clay
loam soils are considered best for getting higher yield. Soil pH between 5.5 and 6.7 is favorable
for its cultivation.
D. BED PREPARATION
A raised bed is always preferred for plantation of Cucumber cultivation. After fumigation, the
beds of following dimensions are prepared.
1. Top width- 90cm.
2. Path width- 50cm.
3. Height40cm.
E. PLANTING DISTANCE
Plant to Plant distance: 45 cm
Row to Row distance : 75 cm
F. PLANTING MATERIAL
Seeds can be sown directly in the bed as cucumber has good germination % of seedling of five to
six weeks age can be used for transplanting, depending on temperature and light conditions
during propagation.
G. VARIETIES/CULTIVARS
There are a number of varieties of cucumber cultivated in India. The important ones are Japnese Lon Green
Poinsette
Khira poona
Balam Khira
H. MANURES AND FERTILIZERS
About 4 to 5 tonnes of farmyard manure, nitrogen in the form of ammonium sulphate or urea,
phosphorus in the form of super phosphate and potash in form of K2So4 should be given
depending upon the fertility status of the soil. The complete dose of farmyard manure should be
applied in the soil at the time of soil preparation. Potassium and phosphate fertilizers should be
mixed in the plant rows just before transplanting. The nitrogenous fertilizer is given two and half
a month after transplanting.
36
I. CULTURAL PRACTICES
a. Training: The basic principle in developing a training system is to uniformly maximize the
leaf interception of sunlight throughout the green house. The selection of a system will
largely depend on the greenhouse facility, the production system, and grower preference. A
vertical cordon system trains plants vertically to an overhead wire. Once the plants reach
the wire they are topped and then pruned using an umbrella system. A second popular
training system is the V-cordon. Single rows are evenly spaced approximately 1.5m apart
and plants are distanced approximately 30 cm apart within each row, and the 2 over head
wires are spaced approximately 75cm apart from each other. Plants can be trained on plastic
twine supported from horizontal support wires running along the length of the bed (3mt
above top of the bed). The base of the string can be anchored loosely to the base of the
plant with non-slip noose.
b. Pruning: The most common pruning system for either vertical cordon or V-cordon trained
plants is known as the umbrella system. The growing point of the main stem is removed
when one or two leaves have developed above the wire. Two lateral branches near the top
of the plant are allowed to grow and are trained over the overhead wire, in downward
direction. The growing point of each lateral is removed when they are approaching to the
ground.
c. Fruit thinning: Fruit pruning each plant is based on plant vigour and fruit load. Extensive
leaf growth is prevented to allow proper colouring of the fruits. The development of the
fruit is dependent on the continuing production of leaf axils. If too many fruits are set at
once, fruit thinning is necessary to avoid malformed and non-marketable small fruit. Such
fruit, as they appear, should be removed.
J. IRRIGATION
Cucumber needs to be irrigated at right time depending upon the growth of plants. Under drip
irrigation system measured quantity of water can be applied. It is best method to optimise plant
nutrition without large fluctuation in the nutrient level in root zone. It minimises losses by
fixation or leaching in the soil thus economically using fertilizers to result in higher yields and
improved quality.
K. INSECT and DISEASES
Cucumber is attacked by number of diseases and pests. The most important diseases are
i.
ii.
iii.
iv.
v.
Bacterial wilt
Anthracnose
Downy and Powdery Mildew
Angular Leaf Spot
Cucumber Mosaic
37
L. HARVESTING
Harvest may begin 50 to 65 days after planting. Cucumber is harvested both for fresh market and
for processing. They should be picked at frequent intervals in order to avoid losses due to over
sized or over mature fruits. Once harvesting starts the fruits are generally picked at 2-4 days
intervals depending upon market information. For commercial purpose, cucumber is harvested
at immature stage 5-7 days after pollination depending upon the cultivars.
M. YIELD
Average yield of capsicum is 6 to 8 kg/ plant.
N. PACKAGING
The harvested fruits are cleaned and packed in Corrugated Fibre Box or Bamboo Box or Gunny
Bags according to the availability of market and transport facility.
O. ESTIMATED COST, MEANS OF FINANCE AND FINANCIAL ANALYSIS
The details of estimated cost, means of finance, economics and financial viability is worked out
for Naturally Ventilated Polyhouse and Walk in Tunnel Polyhouse separately as follows.
38
39
40
41
42
43
44
3. (iv) ROSE
A. INTRODUCTION
Depending on the species and varieties, roses have various uses. They may be used as cut
flowers, and garden plants. They may also be used in making rose oil, rose water and gulkhand.
Model project is on production of roses for use as cut flowers, which have an important place in
preparation of bouquets, floral arrangements, worship, social occasions and presentation of
gifts. Measured in terms of volume of trade in the international market cut roses rank first in
popularity. Further, with the advancement in production and marketing of cut roses and also on
account of recent economic liberalisation there has been an upsurge of interest in production of
cut roses in plastic green houses in India.
B. CLIMATE
Plenty of light, humid and moderate temperature ranging from 15 0C to 280C may be considered
as ideal conditions for roses in the tropical and subtropical climate of India. At temperature
below 150C roses can be grown, but the interval between flushes become longer. At higher
temperature, say above 300C, roses can be grown provided high humidity is maintained and
evaporation is slowed down.
C. SOIL
Well drained soil rich in organic matter and oxygen is good for roses. Organic matter as high as
30 per cent in the top 30 cm of the growing beds is preferred by many growers. The pH of the
soil should be around 6 to 6.5.
D. BED PREPARATION
Top width
90 cm
Bottom width 100 cm
Height
45 cm
Path way
50 cm
E. PLANTING DISTANCE
Plant to Plant distance: 17 cm
Row to Row distance : 45 cm
F. PLANTING MATERIAL
Rose plant used for plantation should be 2-3 month old and have minimum two dark green
colour leaves. Bud union of rose plant should not be covered with soil. It should be 2-3 cm above
the ground level. The sprout coming out of the union should face towards the path at the time of
plantation. Rose plants are planted in a zigzag method on the bed.
G. TYPES OF ROSES AND VARIETIES
The major types of roses which are commercially important are as under:
Hybrid Tea Roses : These have large flowers (4 cm.) long stems (125 cm). Yield varies
from 100-200 stems/sqm. Hybrid Teas fetch higher price than other types. A few wellknown varieties of this group are SONIA, VIVALDI, TINEKE, MELODY, DARLING and ONLY
LOVE.
45
Floribunda Roses : These have small flowers (2.5 cm) and shorter stems (less than 60
cm), but yield much higher than other types. Examples of this type are FRISCO,
MERCEDES, JAGUAR, KISS and FLORENCE.
Spray Roses : A single stem of this type may carry 5-6 flowers, but stem yield per sqm is
low. Important varieties belonging to the type are EVELIEN, JOY and NIKITA.
can take place. When bud attain pea-size and shows slight colour then it is right time to do
disbudding.For most spray varieties, the center crown bud is to be removed. Disbudding is
generally done on weak stem so that it can convert itself to thick stem and in future cuts can be
taken. Thick stem produce strong sprouts whereas then stem gives out weak sprouts
v). Pinching: Removal of unwanted vegetative growth from the axil of leaf below the terminal
bud is called pinching. This helps to get good quality flowers and buds and avoids wastage of
energy in the development of auxiliary bud if done at right stage and right time. It leads to apical
dominance.
vi). Wild shoot (root stock) removal: Wild shoots are the unwanted growth that takes place at
the union on the root stock. They should be removed at the earliest as these will deplete
nutrients and checks growth and development of plant. They should not be cut but removed
from its union by pressing it with thumb in order to check its further sprouting.
vii). Support of the plants
The support system consists of bamboo / GI pipes / 'L' angles inserted on both sides of bed at the
start and end of the bed. Post are placed at intervals of 3m on both sides of the bed, along the
sides of bed, fastened at the posts at 30 cm 40 cm intervals are 14 gauge GI wires or plastic
string to support the plant. Between the wires across the bed, thin strings can be tied to keep
the width of the bed constant. Support system makes intercultural operation easy and protects
the buds from being damaged by not allowing the stems bend into the path.
viii). Pruning: Stems are cut back leaving 4-5 nodes on the basic stock frame, removing all weak
shoots and redirecting the wayward ones. This may be practised in a phased manner so that
flowering takes place from September to March. Generally, flowering takes place 45 days after
pruning.
J. IRRIGATION
Rose plant require a lot of water, at least 6mm/day i.e. 60cum/ha/day. A drainage line may be
laid below the beds for disposal of excess water.
K. PEST and DISEASES
The principal diseases of rose are
i.
ii.
iii.
iv.
v.
Downy Mildew
Powdery Mildew
Botrytis
Pruning Dieback
Black leaf Spot
Control
The preventive spray programme with a volume of 1500 litres/spray at an average interval of
once in a week is suggested. The chemicals could be as under.
Dithane M-45 0.6 gm/litre
Metasystox 1.25 ml/litre
Karathane 1.00 ml/litre
47
L. HARVESTING
Roses should attain the right stage for harvesting. If cut too early, flowers miss reserve food and
therefore, may not develop into full flowers. If cut too late, longevity diminishes. As such, roses
should be cut just as the buds are opening, after the sepals have almost fully curled up and the
colour is fully visible. In small flowered varieties and Floribundas, the flowers are cut just when
they begin to open the cluster. The cutting may be done in the evening or early morning with
long stem. The lower end of cut stems are immediately placed in clean plastic buckets containing
a clean solution of 500 ppm citric acid or in chrysal - RVB. Thereafter, the buckets containing cut
roses are brought to the grading and packing Shed/Hall.
Harvesting Stages
S.No
Particulars
Place of cutting
3 to 3.5
First harvesting
4.5 to 5
Second / Regular
harvesting
The rose should be cut with the help of sharp cut and hold secateurs. Ground shoot cutting
should be done on 5th five pair of leaf then one or two eye buds sprout from lower leaves below
the cut. These sprouts will grow into flowers in the period of 35 to 50 days. This varies from
variety to variety. Later on the first harvest should be taken on 2nd or 3rd five pair of the leaves
above the first cut. During summer season or when there is less leaf area on plant it is always
advisable to take cut on 3rd five pair of leaves above the first cut. Always bend thin stems and
take cut on 3rd five pair of leaves above the first cut. Always bend thin stems and take cut on
thick stems to get strong shoots.
The regular harvesting is done on 2nd five pair of leaves. Sometimes under cutting is also
practiced as it is an important technique to keep rose plants at reasonable height. Harvesting cut
should be sharp and inclined direction for avoiding the deposition of water or spray solution.
When the temperature is low in the green house harvesting is done only once i.e. during early
morning hours. When there is high day temperature it is necessary to take second harvesting in
later afternoon.
Cut stages of roses play an important role in harvesting. Cut stages of roses for export is stage 0
and 1 whereas cut stage is 2 and 3 for domestic market.
M. YIELD
Average yield of roses is 30 to 35 stem/ plant per year.
N. GRADING
Flowers should be graded into different classes according to their qualities. Grading is done on a
mechanical grader or by hand grading tables or work stations.
48
O. PACKAGING
Packing comprises three steps: bunching, wrapping and packing.
The heads of roses are evened up and their stem tied with a rubber band into bunches in 10s,
20s, 25s, or 50s depending on the ultimate market. They are cut so that all the stems are of the
same length. The bunches are placed in preservative solution and may be shifted to the cold
store.
They are brought back to the packing hall and the buds are wrapped and bunches are sleeved in
transport polyethylene. The wrap is a 15-20 cm. wide plastic strip which acts as a cushion for the
buds.
Many different cardboard boxes are used for packing. For long term transport it is best to use
telescopic style boxes made of corrugated fibreboard. The size could be 100 cm x 45 cm x 22 cm.
There may be 400 to 1000 stems per box and weight may vary from 14 to 18 kg/box. Depending
on the market, the box is either filled with one variety, one grade, or mixed colour one grade.
P. ESTIMATED COST, MEANS OF FINANCE AND FINANCIAL ANALYSIS
The details of estimated cost, means of finance, economics and financial viability is worked out
for Naturally Ventilated Polyhouse as follows.
49
50
51
52
3. (v) GERBERA
A. INTRODUCTION
Gerbera is a very attractive, commercial cut flower successfully grown under different conditions
in several areas of the world as well as in India and meeting the requirements of various
markets. This flower is originated in Asia and South Africa. Gerbera jamesonii has been
developed through cross breeding program.
B. CLIMATE
Bright sunshine accelerates the growth and quality of the flowers, however, in summer this
flower needs diffused sunlight. Gerbera plants grown in locations with insufficient light will not
bloom well.
C. SOIL
Red lateritic soils are good for Gerbera cultivation as it is having all the essential qualities that an
ideal soil should have. After fumigation with formaldehyde, the raised beds are prepared on
which Gerbera plants are planted.
D. BED PREPARATION
Top width 60 cm
Bottom width 70 cm
Height 45 cm
Path way - 40 cm
E. PLANTING DISTANCE
Plant to Plant distance: 30 cm
Row to Row distance : 40 cm
F. PLANTING MATERIAL
Plant should not be less than three months old. At the time of planting the tissue culture, plant
should have atleast 4 to 5 leaves. Gerberas are planted on raised bed in two rows formation.
Zigzag plantation system is mostly preferred. While planting 65% portion of root ball should be
kept below ground and rest of the portion i.e. 35% should be kept above the ground for better
air circulation in the root zones.
G. VARIETIES
There are many multi coloured varieties of Gerbera developed through tissue culture.
H. MANURES AND FERTILIZERS
Organic manures are required to be added so that top 30 cm of the soil has 30% organic matter
content. Application of nutrients should be based on analysis of soil and plant. In the present
model the cost has been estimated based on 250 fertigation days and 1.2g dose of fertilizers per
day per sq. meter.
I. CULTURAL PRACTICES
i). Weeding & raking of soil: Weeds take the nutrients of the plants and affect the production.
Hence, they should be removed from the bed. Due to daily irrigation, the surface of the gerbera
bed becomes hard hence raking of soil is done with the help of a raker. It increases soil aeration
in the root zone of the plant. this operation should be done regularly, may be twice in a month.
53
ii). Disbudding: Removal of inferior quality flowers at the initial stage after plantation is called
disbudding. The normal production of gerbera plants starts after 75-90 days from the date of
plantation. Production of flowers starts 45 days after plantation but initial production is of
inferior quality, hence these flowers should be removed from the base of the flowers stalk. this
helps in making the plant strong and healthy.
iii). Removal of old leaves: Sanitation helps in keeping the disease and pest infestation below
the economic threshold level. The old, dry, infested leaves should be removed from the plant
and burnt outside the green house or dumped in to a compost pit. This practice allows producing
good, healthy new leaves and better aeration in the crop.
J. IRRIGATION
Gerbera plant require a lot of water, at least 6mm/day i.e. 60cum/ha/day. A drainage line may
be laid below the beds for disposal of excess water.
K. PEST and DISEASES
The principal diseases of rose are
i.
ii.
iii.
iv.
v.
Pythium
Sclerotinia
White rust
Rhizoctonia
Fusarium
Control:
The preventive spray programme with a volume of 1500 litres/spray at an average interval of
once in a week is suggested.
The chemicals could be as under.
Dithane M-45 0.6 gm/litre
Metasystox 1.25 ml/litre
Karathane 1.00 ml/litre
M. HARVESTING
The first flowers may be harvested after 75-90 days after planting. Flowers of most of the
varieties (single types) are ready to be picked when 2-3 whirls of stamens have entirely been
developed. Some varieties are picked little riper, especially the double types. Skilled labours are
required for harvesting of gerbera cut flowers. After harvesting the flowers should be kept in
bucket containing clean water. Flowers are very delicate hence they should be carefully handled
otherwise can be damaged and their quality gets deteriorated. For harvesting gerbera no
secateurs are required and are done by naked hands.
54
N. YIELD
Average yield of roses is 30 to 35 stem/ plant per year.
O. GRADING
Flowers should be graded into different classes according to their qualities. Grading is done on a
mechanical grader or by hand grading tables or work stations.
P. PACKAGING
Packing comprises three steps: bunching, wrapping and packing.
Many different cardboard boxes are used for packing. For long term transport it is best to use
telescopic style boxes made of corrugated fibreboard. The size could be 100 cm x 45 cm x 22 cm.
There may be 400 to 1000 stems per box and weight may vary from 14 to 18 kg/box.
Depending on the market, the box is either filled with one variety, one grade, or mixed colour
one grade.
Q.
The details of estimated cost, means of finance, economics and financial viability is worked out
for Naturally Ventilated Polyhouse and Walk in Tunnel Polyhouse separately as follows.
55
56
57
58
3. (vi) CARNATION
A. INTRODUCTION
Carnation is an important flower crop having great commercial value as a cut flower due to its
excellent keeping quality, wide array of colour and forms. Carnation, apart from producing cut
flowers can also become useful in gardening for bedding, edging, borders, pots, and rock gardens
There are two basic groups of Carnations traded within the international markets.
S.No
Types of Carnation
Standard carnation
Spray carnation
However, Standard carnation fetch better returns and hence most of the farmers prefer
standard type carnation varieties in India.
B. CLIMATE
Most of the varieties of carnation are photo-period insensitive. Ideal temperature requirement is
about 10o C in the night and 23o C in the day. High light intensity with a 12 hour day length may
produce top quality flowers.
C. SOIL
Carnation thrives best in well drained soil with soil reaction from neutral to slightly alkaline.
D. BED PREPARATION
Carnation may be grown in raised bed of soil. This would allow 72% utilisation of land.
Top width
Bottom width
Height
Path way
90 cm
100 cm
45 cm
50 cm
E. PLANTING DISTANCE
Plant to Plant distance: 15 cm
Row to Row distance : 15 cm
F. PLANTING MATERIAL
Carnations are multiplied vegetatively through cuttings. 10 to 15 cm with 3 to 4 nodes weighing
around 10 gms. terminal cuttings give rise to good plants. Rooting hormone i.e. IBA 500 ppm is
used for root initiation. Cuttings normally develop good root system within 3 weeks. Carnation
plant used for plantation should be 1 to 1.5 month old.
G. VARIETIES
Carnation is loved for its exquisite form, beauty and clove like fragrance and good vase life.
Accordingly, there are number of varieties of Carnation are available for cultivation.
59
S.No
Dimension of Net
Layering from
bottom to top
* Height
(ft)
7.5 cm x 7.5 cm
1st layer
0 0.5
12.5 cm x 12.5 cm
2nd layer
1 1.5
15 cm x 15 cm
3rd layer
2 2.5
15 cm x 15 cm
4th
3 3.5
15 cm x 15 cm
5th layer
4 4,5
*Height of the nets are raised time to time with the growth of the crop.
II). Pinching: Removal of unwanted vegetative growth from the axil of leaf below the terminal
bud is called pinching. this helps to get good quality flowers and buds and avoids wastage of
energy in the development of auxillary bud if done at right stage and right time. It leads to apical
dominance.
There are generally two methods of pinching as follows:
1. Single pinch method
2. Pinch and half method
First the unpinched shoot will grow and produce flowers. Later on pinched shoots will grow and
produce flowers.
iii). Disbudding: Standard varieties are those with one flower on each stem. But as nearly all
varieties produce some side buds below the center bud, those need to be removed. The removal
of these buds is known as disbudding. It should not be done too early or too late. For most spray
carnation varieties, the centre crown bud in many cases is also to be removed.
iv). Weeding and loosening of the soil: This operation is done with the help of long handed
weeding hook (khurpi). It is helpful for removal of weeds, breaking the top layer of algae and to
facilitate better air circulation in soil. this is to be done very carefully to avoid damage of active
roots.
J. IRRIGATION
Rose plant require a lot of water, at least 6mm/day i.e. 60cum/ha/day. A drainage line may be
laid below the beds for disposal of excess water.
K. PEST and DISEASES
The principal diseases of rose are
i.
ii.
iii.
iv.
v.
Pythium
Pythopthora rot
Fusarium wilt
Fusarium stem rot
Alternaria blight, Grey mold
Meanlybug
Spidermite
Thrips
White fly
Aphid
Control:
1.
2.
3.
4.
L. HARVESTING
The regular harvesting cuts are given at 2nd and 3rd nodes. Paint brush stage is the cut stage for
standard carnation. Harvesting starts from 120 to 160 days from the date of plantation. It varies
from variety to variety. Spray carnations are cut when two flowers are open and the remaining
buds are showing colours.
Cut stages of carnation plan an important role in harvesting. Harvesting of carnation is a skilled
job hence requires skilled worker. The yield of flowers not only depends on the variety and
61
pinching operation but also on the period, the crop is harvested. In general 70-80 carnation cut
flowers should be kept in bucket (50 litres capacity) containing 5 to 7 litres of clean chlorinated
water or clean water is containing preservatives like RVB chrysal or Florissant.
M. YIELD
In tropical climate the standard carnation produces 200 cut stems (approx.) per square meter
annually. Whereas spray carnation produce 250 cut stems (approx.) per square meter annually.
N. GRADING
Flowers should be graded into different classes according to their qualities. Grading is done on a
mechanical grader or by hand grading tables or work stations.
O. PACKAGING
Packing comprises three steps : bunching, wrapping and packing. Depending on the market, the
box is either filled with one variety, one grade, or mixed colour one grade.
P. ESTIMATED COST, MEANS OF FINANCE AND FINANCIAL ANALYSIS
The details of estimated cost, means of finance, economics and financial viability is worked out
for Naturally Ventilated Polyhouse and Walk in Tunnel Polyhouse separately as follows.
62
63
64
65