Beruflich Dokumente
Kultur Dokumente
applications like:
ATS - Automatic Transfer Switch
AMF - Automatic Mains Failure
GC315
New AMF&ATS and SPM Genset controller which includes the main engine
and alternator protections with True RMS readings.
Just one product for analogue (with sensors) and CANBUS J1939 engines.
GC310
AMF&ATS and SPM Genset controller which includes the main engine and
alternator protections with True RMS readings.
Just one product for analogue (with sensors) and CANBUS J1939 engines.
GC350 - GC350R
AMF&ATS and SPM Genset controller which includes the main engine and
alternator protections with True RMS readings. Just one product for analogue
(with sensors) and CANBUS J1939 engines.
ATS100
ATS controller able to manage the switch between two sources (Mains or
Gensets).
DST4602
The most advanced Genset controller for synchro/parallel applications.
Controller particularly suggested for complex plants like CHP plants where PLC
functions are required.
DST4602 is available in two versions: compact or split (one box to be mounted
into the control panel and one display to be mounted on the door of the panel).
GC500Plus - GC500R
Genset controller for synchro/parallel applications (Island mode either Mains
parallel). Just one controller able to cover a wide range of applications.
Synchronizer and Load sharing included.
MC100
Supervisor controller for multiple mains parallel applications with several
gensets working in emergency mode
GC315
GC310
GC350
ATS Functions
ATS100
GC500Plus
DST4602
Load shedding
MC100
Load management
MODEM GSM/PSTN
X Standard
O Option
(insulated)
(external device)
O
(external device)
X
(insulated)
GC315
RJ45 Ethernet port
SMS Management
GPRS/GSM/GPS communications
USB Port
DIGITAL INPUT
GC310
GC350
ATS100
GC500Plus
DST4602
MC100
(on board)
(external device)
(external device)
(external device)
(external device)
(on board)
(external device)
(external device)
(external device)
(external device)
(external device)
(external device)
(external device)
(external device)
8+3
8+3
18+3
8+3
20
18
16
16
14
(6 programmable)
(6 programmable)
16/16
16/16
16/16
16
128
10+10/4 (1)
10+10/4 (1)
10+10/4 (1)
10+10/4 (1)
64/32
Periodical test
Fuel management
DIGITAL OUTPUT
16
18+3
(6 programmable)
Display (pixel)
247x187x70
247x187x70
247x187x70
247x187x70
247x187x70
260x205x76mm
247x187x70
128 x 64
128 x 64
128 x 64
128 x 64
128 x 64
240 x 128
128 x 64
UK, ITA, RU
Display languages
X (GC350R)
UK, FR, ITA, RU,
PT
X (GC500R)
UK, FR, ITA, RU,
PT
(1) 10 Programmable analogical Input + 10 Analogical input listed in J1939 list + 4 Programmable and analogical output
X Standard
O Option
DITEL
Expansion module for additional, digital and programmable I/O.
Model with CPU including 16 INPUTS
Model without CPU including 8 OUTPUTS.
Compatibility with: GC315, GC310, GC350, GC500Plus, DST4602.
REWIND, DANCE
Communication modules for GPRS/GSM/GPS interface (Rewind) and
for Ethernet interface (Dance) using the monitoring system
SI.MO.NE.
MODEM GSM GL865 - Traditional modem GSM
Compatibility with: ATS100, GC315, GC310, GC350, GC500Plus,
DST4602.
ROUTER GSM
Extensive device which allow to use one GSM modem for several
controllers. The same for Gateway moduleCompatibility with: GC315, GC310, GC350, GC500Plus, DST4602,
MC100
SICES SUPERVISOR
Its a software by means its possible to monitor, reset, and even program the controller from any remote place.
It is a configurable tool able to display the single line of the diagram. In addition, by means different password levels
its possible to start and stop the genset.
SI.MO.NE
Web based software for remote control of gensets using GPRS/GPS technology.
Its particularly useful for rental gensets due to its possible to know and to be advised in case of events (alarm,
shut-down, change of status) or in case of the genset is moved from the set position.
That software allows to contemporary control many gensets displayed in one screen shot.
SI.MO.NE has to be supported by two hardware:
REWIND Modem GSM/GPRS and GPS (if a special antenna is connected)
DANCE Device for an Ethernet connection