Sie sind auf Seite 1von 2

API 1104 : RT and Visual Inspection Acceptance Criteria |welding course online

Page 1 of 2

online welding courses | non destructive testing


Get free online welding courses,non destructive testing,welding schools,underwater
welding schools,laser welding and electron beam welding

HOME

NDTJOB

ENG.

POWERPLANT

API 1104 : RT and


Acceptance Criteria
Beauty &
Cosmetics
Fashion
Cosmetic Surgery
Designer
Computers

MECHANICAL

Visual

BUYINGGUIDE

SOCCERNEWS

Inspection

DOWNLOAD

Welding Popular Posts

Chitika | Select

API 1104 : RT and Visual Inspection Acceptance Criteria


API 1104 Section 9 acceptance standards presented apply to imperfections
located by radiographic, magnetic particle, liquid penetrant, and ultrasonic test
methods and also be applied to visual inspection. Nondestructive testing shall not
be used to select welds that are subjected to destructive testing .

Below Visual Inspection Acceptance Criteria as per API 1104 :


# The crack, of any size or location in the weld, is not a shallow crater crack or star
crack shall be rejected. The crack is a shallow crater crack or star crack with a
length that exceeds 5/32 in. (4 mm) also rejected.

# Undercutting adjacent to the cover or root bead shall not exceed the dimensions
given in Table 4(Maximum Dimension of Undercutting) and Section 9.3.11

MIG 100 Flux Wire Welder


MIG
Best Price $125.00
or Buy New $129.99

Privacy Information

# Inadequate Penetration (detail see Section 9.3.1 , 9.3.2, 9.3.3 and figure 13)
cant exceed 1 inch.
# Incomplete Fusion shall be considered a defect should any of the following
conditions exist:
a. The length of an individual indication of IF exceeds 1 in.(25 mm).
b. The aggregate length of indications of IF in any continuous 12-in. (300 mm)
length of weld exceeds 1 in. (25 mm).
c. The aggregate length of indications of IF exceeds 8% of the weld length in any
weld less than 12 in. (300 mm) in length.
And fore more Incomplete Fusion can see on Section 9.3.5 (figure 17)

PRIVACY POLICY

Lincoln Electric K2185-1


Handy MIG W...
Lincoln Electric
Best Price $396.83
or Buy New $396.83

# Internal Concavity (Any length of internal concavity is acceptable, provided the


density of the radiographic image of the internal concavity does not exceed that of
the thinnest adjacent parent material. For areas that exceed the density of
the thinnest adjacent parent material, the criteria for burn-through (see 9.3.7) are
applicable) more detailed see Figure 18.

Privacy Information

Free Download Welding


Procedure
API 1104 Welding of
Pipelines
Post-Weld Heat
Treatment/PWHT purpose
Welding defects,
Miscellaneous DEFECTS
Welding Procedure
Specification/WPS Variables
Iron-iron carbide phase
diagrams
Free Download Welding
Inspection Manual Guide
Tables AWS D1.1
Welded Steel Storage Tanks
as per API 650
Tensile Test on Welding
Inspection
Sony Cyber-shot DSC-HX9V
list welding inspector jobs in
singapore 2011
list industrial engineering
schools
industrial engineering
schools
online electrical engineering
schools
Welding inspector jobs in
singapore 2011
Engineering Schools
conveyor belts system
Thermal Coal Power Plant
Layout
rig welder
Electrical engineering
acer iconia 6120
Thermal Coal Power Plant
Layout

# Burn-Through (The maximum dimension exceeds 1/4 in. (6 mm) and the density
of the BTs image exceeds that of the thinnest adjacent parent material) more
detailed see Section 9.3.7.1, 9.3.7.2, 9.3.7.3 .
# Slag Inclusions (when the size of a radiographic indication of slag is measured,
the indications maximum dimension shall be considered its length) more detailed
see Section 9.3.8.1, 9.3.8.2, 9.3.8.3)
# Porosity (The size of an individual pore exceeds 1/8 in. (3 mm)) more detailed
conditions see Section 9.3.9.2 until 9.3.9.4 and Figure 19 or 20.
# Excluding incomplete penetration due to high-low and undercutting, any
accumulation of imperfections (AI) shall be
considered a defect should any of the following conditions exist:
a. The aggregate length of indications in any continuous 12-in. (300-mm) length of
weld exceeds 2 in. (50 mm).
b. The aggregate length of indications exceeds 8% of the weld length.

Related Posts

Free Download
Welding Procedure
Specification for MIG
Prequalified Joint
API 1104 Essential
Variables

http://www.weldingcourse.net/2010/04/api-1104-rt-and-visual-inspection.html

03/01/2012

API 1104 : RT and Visual Inspection Acceptance Criteria |welding course online

Page 2 of 2

by online welding courses non destructive testing


Beauty & Fashion
Cosmetics
Cosmetic Surgery
Designer Footwear
Perfume
Sunglasses
Women's Apparel

Computers
Computer Games
Domain Hosting
Domain Registration
Free Internet
Firewall
Printers

Electronics
DVDs

Chitika | Select

Posted by ahmad subahman

Labels: code
Tag Cloud

Welding Inspector

Electrical Jobs

Government Jobs
Newer Post

Home

Common question
welding storage
(part 2)
AWSD1.1 Visual
Inspection
Acceptance Criteria
AWSD1.1: RT
Acceptance Criteria
Welding Inspector
Reference Literature
TWI training European Welding
Standards Course
TWI training - ASME
IX Welding
Standards Course
Significant changes
in AWS D1.1 2010
Edition

Jobs

Ultrasonic Test
Older Post

Comments
name
enter your comment here

comment

by HTML Comment Box

(Oct 22, 2010) Anonymous said:


if

online welding courses | non destructive testing 2011 |NDT jobs|Mechanical|Eng|coal| Simple SEO | Themes By Viemonsta Networks

http://www.weldingcourse.net/2010/04/api-1104-rt-and-visual-inspection.html

03/01/2012

Das könnte Ihnen auch gefallen