Beruflich Dokumente
Kultur Dokumente
Partition Designs
Editorial
Content
8 Classical range
10 Cover-trims
11
Breasted wall
12
Lining insulation
12
Lining of door face
13
Workshop cabins
Harmony
The ELLERS partitions range has been designed with complementary elements to match. From an aesthetic point
of view, the eye naturally focuses on the width, height and door frame dimensions. Therefore, it forms a coherent,
harmonious and compatible set.
Creativity
Assembling partitions together is a decisive factor when it comes to assessing the final quality. For this reason,
the designers of ELLERS partitions have developed an innovative system that uses mechanized pressure when
assembling partitions. This system, subsidized by OSEO-Innovation, is applied to the entire ELLERS range
and ensures a fast and accurate fitting without equal.
Performance
Each partition installation has its own specification, that is why the ELLERS range has been designed to meet
a variety of needs. Thus, the same profile can be varied according to the unique height, acoustic insulation,
balustrade and removal expectations of your office space.
14 Transparent range
16
Edge to edge glazed simple glazing
17
Edge to edge glazed double glazing
18
Cover-trim glazed simple glazing
19
Cover-trim glazed double glazing
20
Recessed joint glazed simple glazing
21
Recessed joint glazed double glazing
22 Elegant range
24
24
25
26 Doors
28
28
29
29
30
31
32 Accessories
34
34
35
35
Selecting
your partitions
Questions you should ask yourself
Should my partitions have
good noise insulation
capability?
Do I need balustrade
partitions?
Classical
range
11
Cover-trims
classical
classical
10
Breasted wall
From the example of full height partitions, breasted wall
partitions represent another aspect of traditional partitions.
With identical design, they however enable light to
penetrate between the partitioned spaces while reducing
glass surfaces (cost reduction).
Used while adjusting the height of the walls, these
partitions can be used as an off-beat means of decoration.
13
Door-face double
classical
classical
12
Workshop cabins
insulation
profiles
When walls are to be decorated without adding additional
thermal insulation, the doubling of door-face profiles
is the appropriate technical solution to be used.
Removable modules
facilitate dismantling.
Transparent
range
17
transparent
transparent
16
19
Cover-trim glazed
Simple glazing
transparent
transparent
18
Cover-trim glazed
Double glazing
21
transparent
transparent
20
Elegant
range
25
elegant
elegant
24
Decoration panels
Fitted wooden panels provide partitions a high level
of aesthetics. Thanks to this technique, the aluminum
is practically invisible, in favour of wood which brings out
all the nobility of this material.
This finishing can be made on a surface or on both sides
using the same frame as in all the other ranges, thus bringing
all the necessary modular functions to the fittings.
Doors
Very often considered as a standard product, doors help
to increase the level of the desired finishing.
Many of the ranges on offer are suitable for the classical,
transparent or elegant ranges, and these help to propose
custom-made products.
The performance of door frames as well as
the mechanical parts both determine the quality
of doors and also the level of finishing of the unit.
All mechanical systems installed by the ELLERS team
were tested over approximately 60.000 opening/closing
cycles.
An adjustable patented system helps to ensure
the complete closing of the doors which is a proof
of quality.
doors
29
doors
28
full height
simple glazing
double glazing
with transom
Available in opening
or sliding versions.
Exists in opening or sliding versions.
31
Clarit doors
doors
doors
30
Sliding doors
Available in glazed, wooden or aluminum versions,
sliding doors are sometimes used to separate
two working spaces while providing a dynamic side
to the opening/closing aspect.
doors
The use of locks without advancement
of the sliding bolt thus guarantees a perfect plating
of the door against the door frame.
Accessories
ELLERS development teams have established
simple accessories which help to complete
or customize partitions.
In line with traditional assembly and creativity,
accessories have many advantages which
enable office development and a favourable
office environment.
34
35
Shelf support
It is possible to install a shelf by using a bracket system
integrated into the frame. The two installed angle brackets
help to support a loaded shelf, as the weight is thus supported
by the frame of the partition.
These angle brackets are fitted without boring and can easily
be removed or moved.
Picture hooks
On the high wall rails, we can see a hook which enables
pictures to be hung easily.
These hooks can be fixed or removed by the user, moved at will
and used for pictures or any other uses (coat hangers, etc.).
This accessory can additionally be installed on decoration
panels (Elegant range).
In all instances, no drilling or screws are required.
36
37
Our design department analyzes your needs and helps you make the most
of your space to get the best results. Thanks to our teams' high level
of experience, their skills and reliability, we can guarantee you the best
service (custom-made study, quotation, assembly) and propose you
custom-made solutions if necessary.
39
The environment
ELLERS is committed
Aluminum is a recyclable product. Designers
of the ELLERS range have optimized
the recyclability of profiles all along the
production chain.
Overall environmental impact also concerns
material transportation. Logistics networks
have thus been adapted in order to reduce
energy balance and their consequences to
the barest minimum.
Recycling
Logistics
Aluminum spinners of the ELLERS range were given to extruders located in the Euro
zone and mainly in Portugal and Switzerland. These choices meet quality requirements
but also aims at reducing transportation when supplying the main stocks of Lyon.
The Lyon-based factory has installed an aluminum chipping recovery system when
cutting profiles before sending them to the construction site.
During the supply of uncut bars, the factory departure supply procedure is favoured
thereby reducing transport to the barest minimum.
Supplying in 6m, 3m or custom-made bars is also possible. It avoids unnecessary
transportation and excessive use of tools during refurbishment of office work.
Technical specifications
81
81
81
81
81
81
81
35
35
35
35
35
35
35
35
35
35
35
35
35
From 100
to 121
35
35
35
35
35
35
35
35
Deco
ration
pane
l
Rece
ss
to ed ed joint c
lippe
ge
d
35
joint
Rece
ssed
edge
finish
ing la
bels
doub
le gla
zing
81
joint
Rece
ssed
simp
le gla
zing
Rece
ssed
20
joint
Cove
r-trim
doub
le gla
zing
Cove
r-trim
ple g
lazin
g
56
Edge
to ed
ge si
m
Doub
ling o
f the
81
Work
shop
cabin
Doub
le ins
81
Framing
ulatio
n
Glaze
d bre
asted
wall
Cove
r-trim
door
face
Technical
specifications
simp
le gla
zing
43
Edge
to ed
ge do
uble
glazi
ng
42
Fillings
Accessories
Finishing band
Double and simple technical plinth
Picture hook
Shelf support
Coating
White RAL 9010
Sandblasted bronze
RAL colourings
All profile ranges can be supplied within 7 working days in RAL colours.
Special colourings
All profile ranges can be supplied within 11 working days in special colours.
Balustrades
Option
Option
Option
44
45
Acoustic specifications
E80 Partition range with joint covers
Fillings
2xBF 13 plasterboards with 45mm glass wool 1x6mm + 1x8mm glazed panels
41 (-2;-6)
39
42 (-2;-4)
40
46 (-2;-6)
44
2 fermacel BF 13 plasterboards
with 45mm glass wool
46 (-3;-5)
43
42 (-3;-10)
39
2 BF 13 phonic plasterboards
with 45mm glass wool
2 reinforced BF 13 phonic plasterboards
with 45mm glass wool
2 rey solution BF 13 plasterboards
with 45mm glass wool
2 BF 13 plasterboards
with 45mm polyester insulation
48 (-5;-13)
43
50 (-5;-13)
45
39 (-3;-10)
36
39 (-3;-10)
36
40 (-3;-9)
37
38 (-1;-2)
37
42 (-5;-12)
37
42 (-5;-7)
37
44 (-4;-11)
40
32 (-2;-3)
30
45 (-2;-7)
43
47 (-3;-8)
44
44 (-4;-10)
40
32 (-1;-4)
31
34 (-0;-4)
34
Doors
Reminder: Acoustic insulation is aimed at diminishing sound energy. It is rated with RW.
*Rw (C;Ctr)
This index is not often used because it is considered as irrelevant. C and Ctr indexes were implemented when the new European norm was created. This measure is expressed with DB and
rates the ability to soundproof a product or a material. The higher RW is., the more insulating the material is. We make a difference between white noise (road traffic, trains) rated with Ctr
and pink noise (conversation, music, TV) rated with C.
**Ra= Rw+C
DB, which used to be Rrose (dB(A)), is the new European standard to rate acoustic insulation.
47
CERFF Certified
CERFF is an association that helps to check the quality of partitions and
mobile walls. It guarantees approved products with a reorganized referential
and laboratory test.
www.cerffassociation.org
4 - Endurance
5 Acoustic fading
Option:
Stability with vertical loads
Vertical pressure
contact@ellers.fr
www.ellers.fr
ELLERS, a range of INSEO Groupe - Parc dactivits de Sermenaz - 2871, avenue de lEurope - 69140 Rillieux-la-Pape - 04 37 45 13 40
Communiquez photo credits : Simon Logeais - Gilles Desmier - Bruynzeel - Fotolia - October 2010