Beruflich Dokumente
Kultur Dokumente
After getting this image click close now element types is succesfully added.
Show type 2 link 180 in the dialog box, and click ok and enter cross sectional area as 113.09 for
Set No 2
Show type 2 link 180 in the dialog box, and click ok and enter cross sectional area as 50.27 for Set
No 3
Non linear > inelastic > rate independent > isortopic hardening plastic > mises plasticity >
multilinear.
Non linear > inelastic > rate independent > isortopic hardening plastic > mises plasticity >
bilinear.
Enter the yield stress value and tangent modulus value and click ok.
STEP 5: Go to Main menu > Preprocessor > Modelling > Create > Nodes > In Active CS
Click In Active CS
Modelling > create > elements > auto numbered > thru nodes
8.05E-02
0.160957
0.241436
0.321914
0.402393
0.496155
0.600648
0.746845
0.953992
1.26962
1.9658
2.34515
4.32449
5.56057
8.99727
12.9194
18.1421
24.2029
31.4394
42.0542
2000
4000
6000
8000
10000
12000
14000
16000
18000
20000
22000
24000
26000
28000
30000
32000
34000
36000
38000
40000
load vs deflection
45000
40000
35000
30000
25000
20000
15000
10000
5000
0
0.00E+00
1.00E+01
2.00E+01
3.00E+01
4.00E+01
5.00E+01