Beruflich Dokumente
Kultur Dokumente
GREATER MUMBAI
TRAFFIC DEPARTMENT
VOLUME-I
UNIFIED SCHEDULE OF RATES FOR
TRAFFIC AND SIGNALLING WORKS
2013
FOREWORD
Ever since it's establishment in 1888 by the erstwhile British rulers in India, in the last
125 years of the history of its existence Mumbai Municipal Corporation has catered
to every aspect of the citizen of Mumbai that can be conceived of. Think of Engineer
Victor Tulloch, who through his unparalleled immense efforts conceived the water
supply scheme fetching running over from distance of more than 100 km by
constructing a dam across river Tansa, to feed the population of Mumbai, then only a
few thousands in number. The items have changed with technological advancement
and the works like Roller Compacted Concrete Dam at Middle Vaitarna or numerous
underground tunnels for water supply and sewerage disposal, for example, have
become hallmark of MCGM's dedication to the citizen of Mumbai. The challenges
have always been daunting, nevertheless, always met with.
Every civilization be it 5000 years old Harrappan civilization on the bank of
Sindhu River, or Mumbai on the west coast of the Indian Ocean, require
infrastructure like water supply and sewerage system, storm water drainage system,
road, bridges, etc. and hospitals, markets, recreation centers etc. The exponentially
growing population of Mumbai and the technological explosion in the field of
engineering has made every aspect of contracting of works highly challenging.
M.C.G.M. is one of the largest local self government in the Asian Continent.
In observance of historic traditions of strong civic activism, with the change in time
and living conditions to match with the urbanization, M.C.G.M. has mainly focused in
providing variety of engineering services viz, storm water drain, sewerage, water
supply projects, roads, bridges, solid waste management, environmental services.
Beside this, the Corporation is also providing dedicated services in the Health sector
by establishing numbers of Major and Peripheral hospitals.
To update and modernize the mechanism being used for working on projects
from the stage of conceptualization upto execution, the need was realized to revise
prevailing Schedule of Rates along with specifications which were in operations
with various departments and being prepared individually as per their need and
used to revised at different span of time, resulting into various anomalies. Therefore,
to overcome all these, it was essential to revise the schedule of rates, not only with
simple mechanized revision, major changes to keep up with the pace of urbanization,
civilization, construction techniques / mechanization and voluminous developments
by restructuring items in the schedule as per requirements. This exercise would
provide comfort with field requirements and designs and will assist in effective
checks on creation of extra items during execution.
A conscious decision has been taken to keep pace with the changing time
and preparation of Unified Schedule of Rates is the first step forward in this direction.
Since long time, there have been demands made by the stake holders like Municipal
Engineers and Contractors about non-uniformity, anomalies and discrepancies in
various schedules of rates for work contracts of various departments of MCGM.
Every department had its own expertise and way of functioning which got reflected in
its independent schedule of rates, which, however, had no linkage with the fair
market schedules of other departments and resulting into extra items and fair rates.
In place of earlier 9 Schedule of Rates, the Unified Schedule of Rates is an effort &
seeks to rectify the defects, discrepancies and non uniformities which will provide,
not to mention about the ease and accuracy of estimation to the Engineers.
In view of the enormous and voluminous nature of work, keeping time
frame in perspective and above all, to ensure professionalism, the work of
preparation of Unified Schedule of Rates was awarded to the eminent consultants
M/s.Tata Consulting Engineers Ltd. M/s.Tata Consulting Engineers Ltd were directed
to conduct a thorough factual market research for major materials from
stockists/manufacturers/dealers and to study schedules of rates of Govt bodies like
C.P.W.D. and P.W.D. The new Rate Analysis are based on Factual Market research
done by M/s.Tata Consulting Engineers Ltd.
The anomalies in rate are minimized after extensive market research and
collection of quotations from reputed large scaled stockists/dealers, and also after
comparison with rates of CPWD, PWD etc.
The SOR is linked with its comprehensive specifications of basic important
activities so as to have clarity in execution. These specifications follow a chronology
of general scope of the item, material required, processing of material, construction
operation, finishing and mode of measurement.
All the rates are now linked to their detailed specifications and wherever
required, with drawings. Though there are about 12500 items, every item is now
given a Unique Code No. which will eliminate the repetition.
It has been our endeavour to include all the necessary modern materials and
technologies in SOR, for example, the concept of green building, which will go a long
way to have control on creation of extra items and fair rates. A salient feature of this
USR is 'Starring of items' specified, categorically which can be used only at certain
works or locations.
Another salient features is 'Dynamic Rate System' which will be based on
study of data base of quantities and bidding prices of awarded contracts on the basis
of which necessary corrections can be applied to the Unified Schedule of Rates at
specified intervals. The MCGM will be now in position to revise the Unified Schedule
of Rates every year after incumbency period of M/s.Tata Consulting Engineers Ltd of
one year, to work with and correct the system as and when necessary.
I hope this 'Unified Schedule of Rates' will be a milestone in civic governance
by MCGM. This self-contained publication shall be of great help and guidance to the
officers engaged in the project work of MCGM.
A.M.C. (Project)
Municipal Commissioner
A. GENERAL NOTES
1. The schedule of rates will be operative from 16-09-2013
2. The unified schedule of rates includes following department:
i.
Buildings
3. Volume-I contains USR, basic rate list and approved makes and Volume-II
contains specification along with drawings wherever necessary and
mandatory tests.
4. The specification of the items shall be as per latest Indian Standard Codes
unless otherwise specified.
5. The rates of the items in this schedule of rates are worked out assuming
average lead for Greater Mumbai area for all sorts of materials.
6. The rates are inclusive of transportation, duties, taxes and charges of all
Government, Municipal or any other statutory body, applicable from time to
time but exclusive of Works Contract Tax and Labour Cess levied by
Government of Maharashtra.
7. The rates also includes Overheads @ 5% and Contractors Profit @10%
which is inclusive of labour supervision charges, tools and plants.
8. Rates of common material and labour is attached in the Annexure-A in
Volume-I.
9. The building Schedule of Rates 2013 includes the existing items of FMA,
FMB 2009, SIC and Fair items, with deletion of obsolete items, merger of
similar items and value addition of new items in line with modern
technology and trends in accordance with latest rules, regulation, byelaws
etc.
10. As per the Government policy the use fly ash is done for framing the items
of work in accordance with the latest provisions of IS Codes. Also green
building items have been introduced in new schedule to minimize the
consumption of energy during construction and occupancy of building and
also maintaining ecological balance.
11. From safety, health and environment point of view two legged steel tubular
scaffolding shall be used, without making any holes in the outer face of the
building or any structure. And no extra payment shall be made for works
like scaffolding, centering for any height unless otherwise specified.
12. All materials shall be as per approved list of MCGM or equivalent material
having quality standards as per relevant IS codes and shall be of first
quality unless otherwise specified.
13. Following basic rates are considered in the USR:
i.
Followed by Abbreviation code for each schedule of rate for eg H.E. for
Building works, SP for Sewerage, WSP for water supply and so on and
so forth.
The first item category in the list will be numbered as 1
The last part of the code will be a number starting with a to indicate
the item number in the master list.
The alpha numerics will be separated by (dash).
The code will look like: MA-GN-01
Department
works/Common
Abbreviation
Building
Schedule
CS
Roads
RW
RT
Bridges
BW
WSP
Hydraulic Engg.
HE
Sewerage Projects
SP
SWD
ME
10
Garden Works
GW
Sr.
No.
Content
ITEM CODE
VOLUME-I
PAGE NO.
Controller
RT-1
1-2
PCBs
RT-2
2-2
Piping
RT-3
RT-4
RT-5
Signal heads
RT-6
Cables
RT-7
Flashers
RT-8
RT-9
10
RT-10
11
CCTV camera
RT-11
12
RT-12
13
RT-13
14
Civil works
RT-14
15
Dividers
RT-15
16
RT-16
2-3
3-4
4-4
4-5
5-6
6-6
6-7
7-9
9-10
10-10
10-11
12-14
15-17
17-32
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-ATC 1.1
Nos.
620724
RT-ATC 1.2
Nos.
681626
RT-ATC 1.3
Nos.
675481
RT-ATC 1.4
Nos.
730239
RT-NATC 1.5
Nos.
96259
Nos.
43440
Nos.
26352
RT-ATC 1.6
RT-NATC 1.7
CONTROLLER
RT-ATC 1.8
Nos.
15158
RT-ATC 1.9
Nos.
4539
RT-ATC 1.10
Nos.
5674
RT-NATC 1.11
Nos.
3631
RT-NATC 1.12
Nos.
1515
RT-NATC 1.13
Nos.
1769
RT-NATC 1.14
Supply of digital count down timer for non-ATC Signal Junctions ( EN 12966
) Graphic Type
Nos.
21243
RT-NATC 1.15
Nos.
607
RT-NATC 1.16
Supply of count down timer (2 1/2 digit 8" digit height dual colour) for nonATC Signal Junctions as per latest IS, BS or equivalent standards
Nos.
14007
RT-NATC 1.17
Nos.
153
ITEM CODE
RT-ATC 1.18
RT-2
ITEM DESCRIPTION
Earthing Pit with 50 mm dia. G.I. pipe, 3000mm long GI pipe (Class B or
better) earth pit as per IS 3043. The earth pit shall be provided with watering
pipe (Class B) with wire messed funnel, 25x6 GI strip / 8 SWG GI wire up to
chamber (wire or strip size as per fault level), disconnecting links with 450 x
450 mm (clear) RCC chamber & heavy duty 3mm thick CI chequered plate
cover with hinge & stainless steel bolts. Bentonite/ Charcol & Salt shall be
provided for earth pits. Excavation, backfilling, removal of excess soil is
UNIT
RATE
Nos
6525
PCBs
RT-ATC 2.1
Nos.
33761
RT-ATC 2.2
Nos.
41227
RT-ATC 2.3
Nos.
37655
RT-ATC 2.4
Nos.
35940
RT-ATC 2.5
Nos.
41328
RT-ATC 2.6
Nos.
25431
RT-ATC 2.7
Nos.
35193
RT-ATC 2.8
Nos.
63848
RT-ATC 2.9
Nos.
38694
Nos.
11261
Nos.
8113
Nos.
38121
RT-NATC 2.13
Nos
2369
RT-NATC 2.14
Nos
300
RT-NATC 2.15
Nos
131
Nos
9586
Nos
567
RT-ATC 2.10
RT-ATC 2.11
RT-ATC 2.12
RT-ATC 2.16
RT-NATC 2.17
RT-3
PIPING
RT-NATC 3.1
Mtr
174
RT-NATC 3.2
Laying of single 120mm (OD)/ 100 mm (ID) double walled corrugated High
Density Poly Ethylene (HDPE) Pipes including pull wire along with
necessary sockets, couplings etc. and as per drawing no. RT-NATC-3.2A &
RT-NATC-3.2B
Mtr
11
RT-NATC 3.3
Mtr
71
RT-NATC 3.4
Mtr
RT-NATC 3.5
Mtr
55
RT-NATC 3.6
Laying 50 mm (OD)/ 37mm (ID) double walled corrugated High Density Poly
Ethylene (HDPE) Pipes including pull wire along with necessary sockets,
couplings etc. as per drawing no. RT-NATC-3.2A & RT-NATC-3.2B
Mtr
RT-NATC 3.7
Supply of 100 mm Dia. Class 'A' G.I. pipe including Supply of necessary
accessories suct as G.I. couplers etc.
Mtr
833
ITEM CODE
RT-NATC 3.8
RT-NATC 3.9
RT-NATC 3.10
RT-NATC 3.11
RT-NATC 3.12
RT-NATC 3.13
ITEM DESCRIPTION
Laying of 100 mm Dia. Class 'A' G.I. pipe with provision of Pull Boxes etc. as
per drawing no. RT-NATC-3.2A & RT-NATC-3.2B
Supply of 65 mm Dia. Class 'A' G.I. pipe including Supply of necessary
accessories suct as G.I. couplers etc.
Laying of 65 mm Dia. Class 'A' G.I. pipe, with provision of Pull Boxes etc. as
per drawing no. RT-NATC-3.2A & RT-NATC-3.2B
Supply of 50 mm Dia. Class 'A' G.I. pipe including Supply of necessary
accessories suct as G.I. couplers etc.
Laying of 50 mm Dia. Class 'A' G.I. pipe, with provision of Pull Boxes etc.as
per drawing no. RT-NATC-3.2A & RT-NATC-3.2B
Removal of existing all types of Class 'A' G.I. pipe G.I. Pipe excluding
excavation.
UNIT
RATE
Mtr
113
Mtr
506
Mtr
68
Mtr
375
Mtr
57
Mtr
51
RT-NATC 3.14
Mtr
27
RT-NATC 3.15
Mtr
27
Nos
11449
Nos
32372
Nos
31227
Nos
31661
Nos
16202
Nos
49979
RT-4
Nos
37386
Nos
12554
Nos
Nos
20015
12554
Supply of Traffic signal Straight pole of 6 mtr, inner dia 100 mm from
resistant to peeling with base plate size of ( LXWXT) 200mm
RT- NATC 4.11
X200mmX6mm painted with redoxide and double coat with synthetic enamel
paint of yellow colour assembly G.I., class B, as per technical specification
Nos
11449
Nos
32372
Nos
4737
Nos
7896
Nos
27027
Nos
42005
Nos
12822
Nos
332
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
Nos
1010
Supply of Cast Iron Brackets for mounting signal light aspect on pole as per
drawing
Nos
521
Supply of standard neoprene rubber gasket suitable for cantilever pole door
and at cable entry portion of straight pole and cantilever pole
Nos
134
Nos
1362
Fixing of Traffic Signal fix type and swing type Cantilever pole extension arm
Nos
2270
RT-5
3972
7376
2270
2270
Nos
908
Nos
148
Nos
113
Nos
10770
Nos
1838
Nos
221
Nos.
202
Nos.
553
Nos
51
Nos
6788
Nos
6788
Nos
8559
Nos
6788
Nos
8559
Nos
6788
RT-6
Signal Heads
Supply of 300 mm dia single source LED retrofit - Red (blow) as per
Specification
Supply of 300 mm dia single source LED retrofit - Amber (blow) as per
Specification
Supply of 300 mm dia single source LED retrofit - Green (arrow/U- Turn)
EN-12368 as per Specification
Supply of 300 mm dia single source LED retrofit - Red (ped. standing)
EN-12368 as per Specification
Supply of 300 mm dia single source LED retrofit - Green (ped.walking)
EN-12368 as per Specification
Supply of 300 mm dia single source LED retrofit - Amber (arrow) EN12368 as per Specification
Nos
3795
Supply of Polycarbonate LED Signal head housing 300 mm dia. as per ATC
technical specification and drawing alongwith brackets & accessories etc.
(For all type of LED Retrofit)
Nos
4427
ITEM CODE
UNIT
RATE
Nos
3089
Nos
3089
Nos
3461
Nos
2541
Nos
3598
Nos
2762
Nos
312
Nos
624
Nos
312
Nos
567
Mtrs
62
Mtrs
105
Mtrs
318
Mtrs
407
Mtrs
578
Mtrs
748
Mtrs
480
Mtrs
237
Mtrs
24
Mtrs
47
Nos
284
Nos
284
Mtrs
17
Laying of signal cables (all types including communication cables with multi
pairs as described above) in trenches, existing ducts / G.I. Pipes including
ferruling, testing etc. but excluding any cable joint, excavation etc.
Mtrs
30
Mtrs
23
Mtrs
20
Nos
1784
Nos
1863
RT-7
ITEM DESCRIPTION
Supply of 300 mm dia signal LED retrofit - Red (blow) with minimum light
output 260Cd and maximum power consumption 10W 10%, with IP-65
protection
Supply of 300 mm dia signal aspect LED retrofit - Amber (blow) with
minimum light output 260Cd and maximum power consumption 10W10%,
with IP-65 protection
Supply of 300 mm dia signal aspect LED retrofit - Green (arrow/U- Turn)
with minimum light output 100Cd and maximum power consumption
4W10%, with IP-65 protection
Supply of 300 mm dia signal aspect LED retrofit - Red (ped. standing)
with minimum light output 65Cd and maximum power consumption
4W10%,with IP-65 protection
Supply of 300 mm dia single aspect LED retrofit - Green (ped.walking)
with minimum light output 45Cd and maximum power consumption
4W10%,with IP-65 protection
Supply of 300 mm dia signal aspect LED retrofit - Amber (arrow) with
minimum light output 100Cd and maximum power consumption
4W10%,with IP-65 protection
Installation of Polycarbonate LED Signal aspect of 300 mm dia. on standard
traffic signal straight pole
Installation of Polycarbonate LED Signal aspect of 300 mm dia. On standard
traffic signal cantilever pole
Removal of Polycarbonate LED Signal aspect of 300 mm dia. on standard
traffic signal straight pole
Removal of Polycarbonate LED Signal aspect of 300 mm dia. On standard
traffic signal cantilever pole
Cables
Supply of cable jointing Kit and joining of 1.5 sq.mm copper conductor
control cable
Supply of cable jointing Kit and joining of 2.5 Sq.mm. 3 Core copper
RT- NATC 7.18
conductor control cable
RT- NATC 7.17
ITEM CODE
ITEM DESCRIPTION
RT-8
core copper
core copper
core copper
Pair copper
UNIT
RATE
Nos
2423
Nos
1152
Nos
3770
Nos
1310
Nos
1705
Nos
2140
Flashers
Nos
5211
Nos
653
Nos
5685
Nos
7959
Nos
14212
Nos
17055
Nos
7185
Nos
7185
Nos
9256
Nos
16700
RT- NATC 8.11 Supply of solar battery cabinet suitable for 50 AH Battery.
Nos
4634
RT- NATC 8.12 Supply of solar battery cabinet suitable for 65 AH Battery.
Nos
4634
RT- NATC 8.13 Supply of solar battery cabinet suitable for 100 AH Battery.
Nos
4634
RT- NATC 8.14 Supply of solar battery cabinet suitable for 150 AH Battery.
Nos
7283
Nos
1362
Nos
613
RT- NATC 8.17 Installation, testing and commissioning of batteries as described above.
Nos
511
Nos
511
Nos
511
Nos
511
Nos
102068
Nos
102068
Nos
158636
Nos
158636
Nos
158636
RT-9
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
Traficam X-Stream BPL with HTTP streaming video (Ref No. 10-7001)
Narrow Angle, Presence & Data collection
Nos
158636
Nos
18446
Nos
30129
Nos
7378
Nos
61487
Nos
24595
Nos
3689
FLUX , 1 server license of the Traficon Management Software (Ref. No- 100076)
Nos
614869
IMUX , 1 server license of the Traficon streaming server (Ref. No- 10-0086)
Nos
614869
RT-10
45248
596
Nos
63938
Nos
156879
Nos
225429
Nos
225429
Nos
459926
Nos
32919
Nos
113
NOS
42088
Nos
355499
Nos
7424
NOS
6708
NOS
7925
NOS
13415
NOS
6884
Supply of Keyboard
NOS
1973
NOS
947
Antivirus Renewal/updates
NOS
2367
Server for ITACA - Supply of HP Proliant DL580G5 Server, Product ID:438087-421 or any HP/ IBM higher configuration (or compatible with the
said server) for 3 Years 24x7 Onsite Warranty
NOS
685393
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
Server for CCTV HP ProLiant DL380p Gen8 (1) Intel Xeon E5-2643
(3.3GHz/
4-core/10MB/8 GT-s QPI/130 W) Processor/ 10MB (1x10MB) Level 3/ 16
GB RAM PC3L-10600R (DDR3-1333) Registered DIMMS/HP Smart Array
P420i/ZM (RAID 0/1/1+0)/ 8 SFF SAS/SATA HDD Bays; includes 6 SFF
hard drive blanks/(1) HP 460W Common Slot Gold Hot Plug Power Supply
(92% Efficient)/ 3 Years 24x7 Onsite Warranty
NOS
685393
NOS
37579
NOS
55144
NOS
21133
NOS
90189
NOS
112736
NOS
42088
NOS
130079
HOUR
26648
Month
244275
Month
20726
Month
1480
Month
1851
Month
2813
Month
39972
Month
74023
Month
5922
Month
1628
Month
3849
Month
1480
Month
2221
Month
252
Month
1628
Per Day
2665
Month
2517
Month
310895
Providing and fixing cement sheets complete with wooden framework for
Control Room
sft
286
sft
271
SET
90189
NOS
9770
NOS
4810
NOS
187894
NOS
12025
sft
33
Providing and fixing copper refrigerant pipework and AC units of max 2TR
capacity, complete with clamping upto max length of 20 ft per set with
insulation for Control Room
Providing and fixing glass windows (Aluminium sliding windows 3, x 4, size)
for Control Room
Providing and fixing roller blinds (size : 4' x 5') for Control Room
Providing and installing 2TR capacity cassette Air conditioner, complete with
80' pipework for Control Room
Providing and fixing supporting stand for conference main table for Control
Room
Internal plastic paint
ITEM CODE
RT- ATC 10.53
RT- ATC 10.54
RT- ATC 10.55
RT- ATC 10.56
ITEM DESCRIPTION
Strengthening of existing of false ceiling grid with new support and fastner
for Control Room
Providing and fixing Alternative with water Resistant ceiling tiles of 2X2 size
made of PVC for Control Room
Replacement of uphoistry including required foam of 32 D (high density) for
chair
Replacement of pair of handle (SS finish with PU pad) (per pair - 2 Nos) for
chair
UNIT
RATE
sft
23
sft
90
Nos.
1901
Nos.
1253
Nos.
1426
Nos.
86
Nos.
778
Nos.
778
Nos.
5712
Nos
2856
Sft
210
Quarterly
1345845
Rent for 12 Mtr Maclifton for CCTV and Video Detection Cameras ( 8 hrs
Shift)
Per Shift
8809
Nos
1169373
Nos
1244332
Nos
1754059
Nos
1829019
Nos
1604139
Nos
1679099
Nos
1799035
Nos
1873994
Nos
1244332
Nos
1319292
Nos
1679099
Nos
1754059
Nos
1903978
Nos
1978938
Nos
1739067
Nos
1814027
Nos
1993930
Nos
2053898
RT-11
Size 50 Inch (Equivalent to Planar make model no Size 50 Inch (Equivalent to Planar make model no Size 50 Inch (Equivalent to Planar make model no Size 50 Inch (Equivalent to Planar make model no Size 50 Inch (Equivalent to Planar make model no Size 50 Inch (Equivalent to Planar make model no Size 60 Inch (Equivalent to Planar make model no Size 60 Inch (Equivalent to Planar make model no Size 67 Inch (Equivalent to Planar make model no Size 67 Inch (Equivalent to Planar make model no Size 67 Inch (Equivalent to Planar make model no Size 67 Inch (Equivalent to Planar make model no Size 70 Inch (Equivalent to Planar make model no Size 70 Inch (Equivalent to Planar make model no Size 80 Inch (Equivalent to Planar make model no Size 80 Inch (Equivalent to Planar make model no Size 84 Inch (Equivalent to Planar make model no Size 84 Inch (Equivalent to Planar make model no -
CCTV Camera
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
Supply of Outdoor, Colour IP minimum 28x Optical and 10 X Digital Pan Tilt
Zoom Integrated Dome Network Camera. Multiple, individually configurable
MPEG4 and Motion JPEG streams; High Resolution 4 CIF/30 fps. Operation
in -34C to +50C including master recorder software , camera review
licence and per camera licence required
Nos
165097
Nos
8511
6242
1574
1102
2526192
Nos
229521
Quarterly
248
Month
2610
Per Year
143557
NOS
11619
Verint Encoder
NOS
30172
NOS
11244
MTR
157
Month
163133
Month
66558
Nos
1241597
Nos
1314632
Technical Suport for CCTV in TPHQ/ Disaster Control Room per shift
Variable Messaging Signboards
As per EN 12966 of size 2.88 mtrs x 1.44 mtrs display area ( outer cabinet
size of 3.18 x 1.74 mtrs) 20mm pitch , Red Amber dual color full graphic
display with 2 years warranty & 15 years life
As per EN 12966of size 2.88 mtrs x 1.44 mtrs display area ( outer cabinet
size of 3.18 x 1.74 mtrs) 20mm pitch , full color full graphic display with
2years warranty & 15 years life
Basis VMS control remote web based control center software for 50 Users
Nos
607755
Graphical user Interface ( GUI ) map based VMS control center web based
software for 50 Users with ITS connectivity features ( optional )
Nos
2604664
Nos
254892
Nos
269479
Supply of VMS pole assembly as pec ATC Tech specifications as per &
drawing
Supply of VMS gantry assembly as pec ATC Tech specifications as per &
drawing
Nos
31775
Nos
39719
RT-13
Maintenance,
SITC
of
Junctions
&
10
7944
567
709
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
1940239
1455179
970120
105831
Per Junction
5107
Nos
2837
Lump sum charges per signal for Preventive & Corrective Maintenance of
Per month
Road Traffic Signals (ATC)
158747
7376
156607
NOTE: 1)Installation & removal of all items include transportation cost of items from store to site, Breaker cost, Maclifton cost,
Crane cost as applicable and transportation of removed item from site to store.
2) Traficam (the product of M/s. Traficon N.V, Belgium) was the make specific for vehicle detection cameras that has
now been acquired by FLIR systems Inc.
3) M/s.Telvent has now been acquired by M/s. Schneider Electric Infrastructure Ltd.
11
ITEM CODE
RT-14
RT-14.1
ITEM DESCRIPTION
UNIT
RATE
Nos
151.00
Civil Works
RT-14.2
Nos
980.00
RT-14.3
Nos
217.00
RT-14.4
Nos
189.00
RT-14.5
Nos
508.00
RT-14.6
Nos
452.00
RT-14.7
Nos
86.00
RT-14.8
Nos
110.00
Nos
661.00
Nos
447.00
Nos
333.00
RT-14.9
RT-14.10
RT-14.11
12
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-14.12
Nos
954.00
RT-14.13
Cum
362.00
RT-14.14
Cum
873.00
Cum
220.00
RT-14.15
RT-14.16
Rmt
5290.00
RT-14.17
Nos
9375
RT-14.18
Nos
10875
RT-14.19
Nos
9875
RT-14.20
Nos
11250
RT-14.21
Nos
5053
13
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-14.22
Nos
5428
RT-14.23
Nos
821
RT-14.24
Nos
904
RT-14.25
Nos
6270
RT-14.26
Nos
9797
RT-14.27
Nos
60016
RT-14.28
Nos
72910
RT-14.29
Nos
5396
RT-14.30
Nos.
5980
NOTE: 1)Installation & removal of all items include transportation cost of items from store to site,
Breaker cost, Maclifton cost, Crane cost as applicable and transportation of removed item from site to
store.
14
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
No.
491.00
Rmt
68.00
Cum
4313.00
Rmt
332.00
Rmt
4957.00
RT-15-05
Rmt
864.00
RT-15-06
Casting & supplying (any where in city or suburban limit) precast type 1(both
side tapper) dividers in C.C.M 25 as per drg. No. EET&C/Gen/013/03/Ty dt.
11.12.03 (Revised on 15/06/06) etc. as directed by the engineer. The rate is
inclusive of all lift & leads, transportation required for the work.
Rmt
523.00
RT-15-07
Rmt
665.00
RT-15-08
Casting & supplying (any where in city or suburban limit) precast type 2
(Single side tapper) dividers in C.C.M 25 as per drg No.
EET&C/Gen/013/03/Ty dt 11.12.03 (Revised on 15/06/06) etc. as directed
by the engineer. The rate is inclusive of all lift & leads, transportation required
for the work.
Rmt
434.00
15
RT-15-01
RT-15-02
RT-15-03
RT-15-03
RT-15-04
DIVIDERS
Removing any type of c.c. tapered kerbs from the existing island etc.&
transporting the same any where in the city & suburbs & stacking the same
nearby as directed
Providing / Laying C.C M10 in traffic island etc. wherever necessary giving
the appearance of chequred tiles required with proper finish in order to have
a non slippery surface including curing & vibrating by mechanical means etc.
complete as directed
Removing RCC parabolic dividers from the road & transporting the same
anywhere in Gr, Mumbai limit, stacking the same as directed
Providing, casting and fixing (any where in city or suburban limit) precast
reinforced parabolic dividers in C.C.M 25, Type-5 as per drg. No. EET &
C/Gen/013/03/Ty dt. 11.12.03 (Revised on 15/06/06) including providing,
bending, fixing of reinforcement as per drawing, fixing the dividers on site in
C.M. 1:2 for cushioning and jointing, filling the gap between dividers with
C.C.M 15, curing, painting the exposed surface with road marking paint grade
I ( confirming to IS- 164) in two coatss of approved colour including
excavation in road portion and removing excavated material as per direction
any where in city or suburban limit, cleaning the site etc. as directed by the
engineer, The rate is inclusive of all lift and leads, transportation required for
the work.
15
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-15-09
Rmt
624.00
RT-15-10
Rmt
341.00
RT-15-11
Rmt
249.00
RT-15-12
Rmt
121.00
RT-15-13
Rmt
214.00
RT-15-14
Rmt
825.00
RT-15-15
Providing cast in situ tapering kerbs of C.C.M 25 type 1 on roads as per drg
No. EET&C/Gen/013/03Ty dt 11.12.03 (Revised on 15.06.2006) finished
neatly with C.M 1:2 painting the exposed surface with two coats of road
marking paint grade-I ( confirming to IS- 164) of approved colour and quality,
including excavation in road portion and removing excavated material as per
direction any where in city or suburban limit cleaning the site etc as directed
by engineer ,The rate is inclusive of all lift and leads, transportation required
for the work
Rmt
757.00
16
ITEM CODE
RT-15-16
RT-15-17
RT-15-18
RT-15-19
RT-15-20
RT-15-21
16
ITEM DESCRIPTION
Providing cast in situ tapering kerbs of C.C.M 25 type 2 on roads as per drg
No. EET&C/Gen/013/03Ty dt 11.12.03 (Revised on 15.06.2006) finished
neatly with C.M 1:2 painting the exposed surface with two coats of road
marking paint grade-I ( confirming to IS- 164) of approved colour and quality,
including excavation in road portion and removing excavated material as per
direction any where in city or suburban limit cleaning the site etc as directed
by engineer ,The rate is inclusive of all lift and leads, transportation required
for the work
Providing cast in situ tapering kerbs of C.C.M 25 type 3 on roads as per drg
No. EET&C/Gen/013/03Ty dt 11.12.03 (Revised on 15.06.2006) finished
neatly with C.M 1:2 painting the exposed surface with two coats of road
marking paint grade-I ( confirming to IS- 164) of approved colour and quality,
including excavation in road portion and removing excavated material as per
direction any where in city or suburban limit cleaning the site etc as directed
by engineer ,The rate is inclusive of all lift and leads, transportation required
for the work
Providing cast in situ tapering kerbs of C.C.M 25 type 4 on roads as per drg
No. EET&C/Gen/013/03Ty dt 11.12.03 (Revised on 15.06.2006) finished
neatly with C.M 1:2 painting the exposed surface with two coats of road
marking paint grade-I ( confirming to IS- 164) of approved colour and quality,
including excavation in road portion and removing excavated material as per
direction any where in city or suburban limit cleaning the site etc as directed
by engineer ,The rate is inclusive of all lift and leads, transportation required
for the work
Providing, casting, fixing (anywhere in city or suburban limit) type 3 ( C.C
Studs) dividers in C.C.M 25 as per drg. No. EET&C/Gen/013/03/ty dt.
11.12.03 (revised on 15-06-2006) including fixing the dividers on site in C.
C.M -10 for cushioning and jointing, curing, painting the exposed surface with
road marking paint grade I (Conforming to IS-164) in two coatss of approved
colour, including excavation in road portion and removing excavated material
as per direction any where in city or suburban limit, cleaning the site etc as
directed by engineer, The rate is inclusive of all lift and leads, transportation
required for the work
Casting & supplying (any where in city or suburban limit) precast type 3
dividers in C.C.M 25 as per drg No. EET&C/Gen/013/03/Ty dt 11.12.03
(Revised on 15/06/06) etc. as directed by the engineer. The rate is inclusive
of all lift & leads, transportation required for the work.
Casting & supplying (any where in city or suburban limit) precast type 4
dividers in C.C.M 25 as per drg No. EET&C/Gen/013/03/Ty dt 11.12.03
(Revised on 15/06/06) etc. as directed by the engineer. The rate is inclusive
of all lift & leads, transportation required for the work.
UNIT
RATE
Rmt
585.00
Rmt
269.00
Rmt
534.00
Rmt
308.00
Rmt
180.00
Rmt
399.00
Rmt
3618.00
Rmt
216.00
Rmt
431.00
RT-16-01
RT-16-01-a
RT-16-01-b
17
ITEM CODE
UNIT
RATE
Rmt
523.00
Rmt
201.00
Rmt
3153.00
Rmt
216.00
Rmt
431.00
Rmt
523.00
Rmt
201.00
RT-16-03
Rmt
11126.00
RT-16-04
Providing and fabrication and fixing Stainless Steel railing of 10 gauge of 304
grade stainless steel having minimum nickel content of 10% (laboratory
testing certificate shall be provided for used material), 40mmX40mm square
pope railing with 18mmX18mm square intermediate support,65mmX65mm
square main supports with Stainless Steel pedestal (base-I type) and
Stainless Steel cap- (type-I) including cutting, welding, riveting, polishing as
directed and fixing in cement concrete foundation as shown vide Sr.No.2F-A1
in catalogue of Street Furniture (Vol.I) published by M.C.G.M including
removal of surplus material/debris and restoring damaged portion. (footpath,
etc. directed (with advertisement panel)
Rmt
11327.00
RT-16-05
Providing and fabrication and fixing Stainless Steel railing of 10 gauge of 304
grade stainless steel having minimum nickel content 10% ( Laboratory testing
certificate shall be provided for used material), dia. 40mm circular pipe railing
with dia. 18mm circular intermediate support, dia. 65mm circular main
supports with Stainless Steel pedestal( base-I type) and Stainless Steel cap
(type-I) including cutting, welding, riveting, polishing as directed and fixing in
cement concrete foundation as shown vide Sr.No.2F-A1 in catalogue of
Street Furniture (Vol.I) published by M.C.G.M. including removal of surplus
material/debries and restoring damaged portion of footpath, etc. as directed.
Rmt
9306.00
RT-16-01-c
RT-16-01-d
ITEM DESCRIPTION
Add for application for Rusticide for removal of rust and providing rust
preventing treatment of electrometric Alkaline Polymerie, rust preventing
solution as per Manufacturers specification.
Add for providing advertisement panel for advertisement, If provided.
CIRCULAR PIPE RAILING
RT-16-02
RT-16-02-a
RT-16-02-b
RT-16-02-c
RT-16-02-d
Providing and fabricating and fixing M.S. railing of 10 Gauge, Dia. 40mm
circular railing with Dia. 18mm circular intermediate support, Dia. 65mm
circular main supports with M.S. pedestal (base-I-type) and M.S. cap-(typeI) including cutting, welding, riveting oil painting with navy blue colour or any
other approved colour shades as directed and fixing in cement concrete
foundation as shown vide Sr.No.2F-A1 in catalogue of street Furniture (Vol.I)
published by MCGM including removal of surplus material/debris material.
debries and restoring damaged portion of footpath etc. as directed (without
advertisement panel)
Add for providing Aluminium Pedestal and Aluminium Caps (in place of
M.S. Pedestal and M. S .Cap) if provided
Add for providing FRP Pedestal and FRP Caps (in place of M.S. Pedestal
and M.S.Cap) if provided
Add for application of Rusticide for removal of rust and providing rust
preventing treatment of elastomeric Alkaline Polymeric, rust preventing
solution as per Manufacturers specification, If provided
Add for providing advertisement panel for advertisement, If provided.
18
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-06
Providing and fabrication and fixing Stainless Steel railing of 10 gauge of 304
grade stainless steel having minimum nickel content 10% ( Laboratory testing
certificate shall be provided for used material) dia. 40mm circular pipe railing
with dia. 18mm circular intermediate support, dia. 65mm circular main
supports with Stainless Steel pedestal( base-I type) and Stainless Steel cap
(type-I) including cutting, welding, riveting, polishing as directed and fixing in
cement concert foundation as shown vide Sr.No.2F-A1 in catalogue of Street
Furniture (Vol.I) published by M.C.G.M. including removal of surplus
material/debries and restoring damaged portion of footpath, etc. as
directed(with advertisement)
Rmt
9507.00
RT-16-07
Arrow marking for Route direction straight or right or left or straight & right or
straight or left & lettering as per design in white or traffic yellow as specified
and directed for speed limit upto 50 km/hrs.
Each
933.00
NOS.
19945.00
RT-16-08
Street Name Board without sign board: Providing, fabricating and erecting on
site Street Name Board (of type 2S-A-1) as per the design incorporated in the
catalogue of street Furniture (Volume-II) Published by M.C.G.M. Vertical pole
shall be M.S. Square pipe of size 75mm x 75mm x 3.5mm thk. Signage
plaque (box) shall be of size 900mm x 600mm made of M.S. angle frame of
size 50mm x 50mm x 6mm thick covered with 3mm thk aluminum sheet /
F.R.P. Sheet on both sides. The signage plaque assembly shall be fixed to
the vertical pole with 40mm x 10mm thk size MS support plate. The traffic
signboard of size 600mm dia shall be supported on M.S. support pipe of size
50mm x50mm x 3mm. Traffic sign board shall be made of 25mm x 25mm x
3mm thick M.S. Sq. pipes covered with 3mm thk. Aluminum sheet / F.R.P.
sheet on both sides as shown in the figure. The top open end of the vertical
pole shall be closed with M.S. plate of size 75mm x 75mm x 3.5mm thick.
Both the boxes shall be pasted with HIGH INTENSITY GRADE retro reflective
base sheets on both sides conforming to I.R.C. 67 CODE. Letters or
signages to be pasted on these boxes shall also be of HIGH INTENSITY
GRADE (upto 50% of basic area) conforming to I.R.C. 67 CODE. The
reflectivity of sheet shall have guarantee of 7 years, the reflection count shall
not be less than 90% of its original reflection after 7 years. The base plate of
the vertical pole shall be MS of size 200mm x 200mm x 6mm thick anchored
with 16mm dia. J Bolts in 1:2:4 cement concrete with 2 nos. 6mm dia. MS
reinforcement placed both ways as shown in the figure The assemble shall be
treated with RustIcide solution of approved company and applied with
Polyurethane Primer and Paint to resist rusting of material (the treatment shall
be given as per Manufactures specification and certificate to than effect shall
be submitted along with guarantee certificate) The cost is inclusive of making
good the damage portion of footpath and lining work with pavers blocks and
removing debris etc. Complete as per specification.
19
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-09
Street Name Board without sign board: Providing, fabricating and erecting on
site Street Name Board (of type 2S-A-1 and 2S-F) As per the design
incorporated in the catalogue of street Furniture (Volume II). Published by
M.C.G.M., Vertical pole shall be M.S. Square pipe of size 75mm x 75mm x
3.5mm thick Signage plaque (box) shall be of size 900mm x 600mm made of
M.S. angle frame of size 50mm x 50mm x 6mm thick covered with 3mm thk
aluminum sheet / F.R.P. Sheet on both sides, the box assembly; shall be
fixed to the vertical pole with 40mm x 10mm thick size MS support plate. The
top open end of the vertical pole shall be closed with MS Plate of size 75mm
x 75mm x 3.5mm thick. The box shall be pasted with HIGH INTENSITY
GRADE retro reflective base sheets on both sides conforming to I.R.C. 67
CODE. Letters or signages to be pasted on this box shall also be of HIGH
INTENSITY GRADE (up to 50% of basic area) conforming to I.R.C. 67
CODE. The reflective of sheet shall have guarantee of 7 years. The reflection
count shall not be less than 90% of its original reflection after 7 years The
base plate of the vertical pole shall be of MS size 200mm x 200mm x 6mm
thick anchored with 16mm dia. J Bolts in 1:2:4 cement concrete with 2nos
6mm dia. MS reinforcement placed both ways as shown in the figure (2S-A1) The assembly shall be painted with matt finish enamel paint, street grey
colour (having 90% black content.) The cost is inclusive of making good the
damage portion of footpath and lining work with paver blocks and removing
debris etc. Complete as per specification and as directed by the Engineer.
NOS.
14237.00
RT-16-10
Board Street Name without sign board: Providing, fabricating and erecting on
site Street Name Board (of type 2S-A-1 and 2S-F) as per the design
incorporated in the catalogue of street Furniture (Volume-II). Published by
M.C.G.M. Vertical pole shall be M.S. Square pipe of size 75mm x 75mm x
3.5mm thick. Signage plaque (box) shall be of size 900mm x 600mm made
of M.S. angle frame of size 50mm x 50mm x 6mm thick covered with 3mm
thick aluminum sheet / F.R.P. Sheet on both sides, the box assembly; shall
be fixed to the vertical pole with 40mm x 10mm thick size MS support plate.
The top open end of the vertical pole shall be closed with MS plate of 75mm x
75mm x 3.5mm thick. The box shall be pasted with HIGH INTENSITY
GRADE retro reflective base sheets on both sides conforming to I.R.C. 67
CODE. Letters or signages to be pasted on this box shall also be of HIGH
INTENSITY GRADE (upto 50% of basic area) conforming to I.R.C. 67 CODE.
The reflectively of sheet shall have guarantee of 7 years, the reflection count
shall not be less than 90% of its original reflection after 7 years. The base
plate of the vertical pole shall be of MS of size 200mm x 200mm x 6mm thick
anchored with 16mm dia. J Bolts in 1:2:4 cement concrete with 2nos 6mm
dia. MS reinforcement placed both ways as shown in the figure (2S-A-1).
The assembly shall be treated with RustIcide solution of approved company
and applied with Polyurethane primer and Paint to resist rusting of material
(the treatment shall be given as per Manufactures specification and certificate
to than effect shall be submitted along with guarantee certificate). The cost is
inclusive of making good the damage portion of footpath and lining work with
paver blocks and removing debris etc. Complete as per specification and as
directed by the Engineer.
NOS.
14905.00
BOLLARDS
20
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-11
NOS.
5281.00
RT-16-12
NOS.
4921.00
RT-16-13
SQUARE PIPE Steel Bollards: Providing, fabricating and fixing .Square Steel
Bollards of, 100mm x 100mm, Square Steel Pipe (of type 3F-A-1) as per the
design incorporated in the Catalogue of Street Furniture (Vol-I) Published by
MCGM, made of 10 Guage, 304 quality material with minimum nickel content
not less than 10% (laboratory testing certificate shall be provided for used
material) with stell pedestal and steel cap as per designs (3F-A1), (3F-A1.1),
(3F-A1.2) and (3F-A1-3) suitable to match the design adopted for surrounding
railing including cutting, welding, riveting, polishing. The foundation shall
either be with base plate of 200 x 200 x 6mm thk, 16 mm dia J Bolts or
embedding pipe in foundation by providing 20mm Dia x 6 nos holdfasts
embedded in 1:2:4 concrete as shown in drawing (3F-A1.1). inclusive of
making good the damage portion of footpath with matching pavers blocks,
tiles, removing debris etc. Complete as per specifications and as directed by
the Engineer.
NOS.
8479.00
21
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-14
NOS.
7459.00
NOS.
27718.00
RT-16-15
Junction Name Board : Providing, fixing and erecting on site Junction Name
Board / Chowk (of type 2S-D), as per the design incorporated in the
catalogue of street Furniture published by M.C.G.M., Vertical pole shall be
M.S. Square pipe of size 100mm x 100mm x 3.5mm thick. Signage plaque
(box) shall be of size 900mm x 900mm made of M.S.L angle frame of size
75mm x 75mm x 6mm thick covered with 3mm thick aluminum sheet / F.R.P.
Sheet on both sides, the box assembly; shall be fixed to the vertical pole with
40mm x 10mm thick size MS support plate. The top open end of the vertical
pole shall be closed with MS Plate of size 100mm x 100mm x 3.5mm thick.
The box shall be pasted with HIGH INTENSITY GRADE retro reflective base
sheets on both sides conforming to I.R.C. 67 CODE. Letters or signages to
be pasted on this box shall also be of HIGH INTENSITY GRADE (up to 50%
of basic area) conforming to I.R.C. 67 CODE. The reflective of sheet shall
have guarantee of 7 years. The refection count shall not be less than 90% of
its original reflection after 7 years. The foundation shall either be with base
plate of 200 x 200 x 6mm thick 16 mm dia J Bolts or embedding pipe in
foundation by providing 20mm Dia x 6 nos hold fasts embedded in 1:2:4
concrete as shown in drawing (3F-A1.1). The assembly shall be treated with
RustIcide solution of approved company and applied with Polyurethane
primer and Paint to resist rusting of material (the treatment shall be given as
per Manufactures specification and certificate to than effect shall be
submitted along with guarantee certificate). Further, it shall be painted with
matt finish enamel enamel paint, street grey colour (having 90% black
content). The cost is inclusive of making good the damage portion of footpath
and lining work with pavers blocks and removing debris etc. Complete as per
specification and as directed by the Engineer.
22
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-16
Junction Name Board: Providing, fixing and erecting on site Junction Name
Board (of type 2S-E2) As per the design incorporated in the catalogue of
street Furniture published by M.C.G.M., Vertical pole shall be M.S. Square
pipe of size 100mm x 100mm x 3.5mm thick. Signage plaque (box) shall be
of size 900mm x 900mm made of M.S.L angle frame of size 75mm x 75mm x
6mm thick covered with 3mm thick aluminum sheet / F.R.P. Sheet on both
sides, the box assembly; shall be fixed to the vertical pole with 40mm x 10mm
thick size MS support plate. The top open end of the vertical pole shall be
closed with MS Plate of size 100mm x 100mm x 3.5mm thick. The box shall
be pasted with HIGH INTENSITY GRADE retro reflective base sheets on both
sides conforming to I.R.C. 67 CODE. Letters or signages to be pasted on this
box shall also be of HIGH INTENSITY GRADE (up to 50% of basic area)
conforming to I.R.C. 67 CODE. The reflective of sheet shall have guarantee
of 7 years. The refection count shall not be less than 90% of its original
reflection after 7 years. The foundation shall either be with base plate of 200 x
200 x 6mm thick 16 mm dia J Bolts or embedding pipe in foundation by
providing 20mm Dia x 6 nos hold fasts embedded in 1:2:4 concrete as shown
in drawing (3F-A1.1). The assembly shall be treated with RustIcide solution of
approved company and applied with Polyurethane primer and Paint to resist
rusting of material (the treatment shall be given as per Manufactures
specification and certificate to than effect shall be submitted along with
guarantee certificate). Further, it shall be painted with matt finish enamel
paint, street grey colour (having 90% black content). The cost is inclusive of
making good the damage portion of footpath and lining work with pavers
blocks and removing debris etc. Complete as per specification and as
directed by the Engineer.
NOS.
26112.00
NOS.
24492.00
RT-16-17
Junction Name Board : Providing, fixing and erecting on site Junction Name
Board (of type 2S-E1) as per the design incorporated in the catalogue of
street Furniture published by M.C.G.M. Vertical pole shall be M.S. Square
pipe of size 100mm x 100mm x 3.5mm thick. Signage plaque (box) shall be
of size 900mm x 900mm made of M.S.L angle frame of size 75mm x 75mm x
6mm thick covered with 3mm thick aluminum sheet / F.R.P. Sheet on both
sides, the box assembly; shall be fixed to the vertical pole with 40mm x 10mm
thick size MS support plate. The top open end of the vertical pole shall be
closed with MS Plate of size 100mm x 100mm x 3.5mm thick. The box shall
be pasted with HIGH INTENSITY GRADE retro reflective base sheets on both
sides conforming to I.R.C. 67 CODE. Letters or signages to be pasted on this
box shall also be of HIGH INTENSITY GRADE (up to 50% of basic area)
conforming to I.R.C. 67 CODE. The reflective of sheet shall have guarantee
of 7 years. The reflection count shall not be less than 90% of its original
reflection after 7 years. The foundation shall either be with base plate of 200 x
200 x 6mm thick 16 mm dia J Bolts or embedding pipe in foundation by
providing 20mm Dia x 6 nos hold fasts embedded in 1:2:4 concrete as shown
in drawing (3F-A1.1). The assembly shall be treated with RustIcide solution of
approved company and applied with Polyurethane primer and Paint to resist
rusting of material (the treatment shall be given as per Manufactures
specification and certificate to than effect shall be submitted along with
guarantee certificate). Further, it shall be painted with matt finish enamel
paint, street grey colour (having 90% black content.) The cost is inclusive of
making good the damage portion of footpath and lining work with pavers
DIRECTION BOARD
23
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-18
NOS.
50631.00
RT-16-19
NOS.
81794.00
24
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-20
NOS.
57149.00
RT-16-21
NOS.
76997.00
25
ITEM CODE
RT-16-22
RT-16-23
ITEM DESCRIPTION
Direction Board Providing, Fabricating, Erecting on site Direction Board
(of type 3S-A1) (LARGE-2), as per the design incorporated in the catalogue
of street Furniture published by M.C.G.M., Vertical pole shall be ISMC-350.
Signage plaque (box) shall be of size 1200mm x 1800mm made of ISMC
100mm and bracing of MS angle 50mm x 50mm x 6mm, covered with 3 mm
aluminum sheet / F.R.P. Sheet on both sides, the box assembly; shall be
fixed to the vertical pole. The box shall be pasted with HIGH INTENSITY
GRADE retro reflective base sheets on both sides conforming to I.R.C. 67
CODE. Letters or signages to be pasted on this box shall also be of HIGH
INTENSITY GRADE (up to 50% of basic area) conforming to I.R.C. 67
CODE. The reflectivity of sheet shall have guarantee of 7 years. The
refection count shall not be less than 90% of its original reflection after 7
years. The vertical poles shall be provided with 20 mm dia 6 nos. hold fasts
embedded in 1:2:4 CC foundation of size 1500 mm x 1500mm as shown in
drawing (3S-A1.1). The assembly shall be treated with RustIcide solution of
approved company and applied with Polyurethane primer and Paint to resist
rusting of material (the treatment shall be given as per Manufactures
specification and certificate to than effect shall be submitted along with
guarantee certificate). Further, it shall be painted with matt finish enamel
paint, street grey colour (having 90% black content.) The cost is inclusive of
making good the damage portion of footpath and lining work with pavers
blocks and removing debris etc. Complete as per specification and as
directed by the Engineer.
Direction Board Providing, Fabricating, Erecting on site Direction Board
(of type 3S-A2) (LARGE-1) as per the design incorporated in the catalogue
of street Furniture published by M.C.G.M., Vertical pole shall be ISMC-350.
Signage plaque (box) shall be of size 1200mm x 2400mm made of ISMC
100mm and bracing of MS angle 50mm x 50mm x 6mm, covered with 3 mm
aluminum sheet / F.R.P. Sheet on both sides, the box assembly; shall be
fixed to the vertical pole. The box shall be pasted with HIGH INTENSITY
GRADE retro reflective base sheets on both sides conforming to I.R.C. 67
CODE. Letters or signages to be pasted on this box shall also be of HIGH
INTENSITY GRADE (up to 50% of basic area) conforming to I.R.C. 67
CODE. The reflectivity of sheet shall have guarantee of 7 years. The
refection count shall not be less than 90% of its original reflection after 7
years. The vertical poles shall be provided with 20 mm dia 6 nos. hold fasts
embedded in 1:2:4 CC foundation of size 1500 mm x 1500mm as shown in
drawing (3S-A1.1). The assembly shall be treated with RustIcide solution of
approved company and applied with Polyurethane primer and Paint to resist
rusting of material (the treatment shall be given as per Manufactures
specification and certificate to than effect shall be submitted along with
guarantee certificate). Further, it shall be painted with matt finish enamel
paint, street grey colour (having 90% black content.) The cost is inclusive of
making good the damage portion of footpath and lining work with pavers
blocks and removing debris etc. Complete as per specification and as
directed by the Engineer.
MANDATORY & CAUTIONARY BOARD
26
UNIT
RATE
NOS.
64275.00
NOS.
75010.00
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-24
NOS.
8572.00
RT-16-25
NOS.
8820.00
27
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-26
NOS.
11758.00
RT-16-27
NOS.
11999.00
28
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-29
NOS.
5140.00
RT-16-30
NOS.
13400.00
29
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-31
NOS.
14255.00
RT-16-32
Supplying and fixing taxi stand post made of 3 mm thick aluminum composite
panel (ACP) of size 600mm x 600mm informatory sign (in required colour
combinations) as per IRC :67-2012 made of high intensity prismatic
encapsulated type heat activated retro- reflective sheeting of approved make
vide MORTH clause 801.3. The panel shall be fixed to M.S. angle frame size
25mm x 25mm x 3mm with necessary screws.The panel shall be bonded with
background blue and matter shall be white full digital printing on vinyl having
pressure sensitive adhesive conforming to Class - 2 of ASTM - D-4956-09
(Typr - IV) on one side of the board and taxi logo of size 350mm x 225mm
bonded with white background and matter in black vinyl having heat and
pressure sensitive adhesive on one side of the board along with 40mm x
40mm x 5mm on M.S. angle pole 10 feet single of wt 15-17kg with bands of
black and white colour synthetic enamel paint on primer for mounting the sign
board with fixing in concrete M20 foundation as per approved design. The
rate includes cost of ACP, vinyl, adhesive,angle back support, angle post,
fasteners, concrete and labour charges for excavation, concreting, erection
and fixing etc., all complete and as per the directions of the Engineer - in charge.
NOS.
5612.00
TREE GUARD
RT-16-33
Circular tree guard : Providing and fabrication and fixing M.S. Circular tree
guard with circular pipe of 10 gauge, 50mm Dia Circular vertical post, 40mm
Dia Horizontal support 18mm Dia. intermediate support with M.S. cap- (type-I)
logo panel etc. including cutting welding, riveting, oil painting with navy blue
colour or any other approved colour shade as directed and fixing in cement Per Unit
concrete foundation including cement concrete paver block lining including
removal of surplus material/debries and restoring damaged portion of
footpath etc. as directed.(Design details vide Drg.No.4F-AA, 4F-A1.2,A1.3 in
the catalogue of street Furniture (Vol.I) published by M.C.G.M.)
30
9713.00
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-34
Hexagonal tree guard No.4F-tgu-B : Providing and fabrication and fixing M.S.
Hexagonal tree guard with circular pipe of 10 gauge, 50mm Dia Circular
vertical post, 40mm Dia circular horizontal support, 18mm Dia circular
intermediate support with M.S. cap-(type-I) logo panel etc including cutting
welding, riveting, oil painting with navy blue colour any other approved colour
shade as directed and fixing in cement concrete foundation including cement
concrete paver block lining including removal of surplus material/debries and
restoring damaged portion of footpath etc. as directed. (Design details vide
Drg.No.4F-B1 in the catalogue of street Furniture (Vol.I) published by
M.C.G.M.)
Sqm
10996.00
RT-16-35
Square tree guard : Providing and fabrication and fixing M.S. Hexagonal tree
guard with circular pipe of 10 gauge, 50mm Dia Circular vertical post, 40mm
Dia circular horizontal support, 18mm Dia circular intermediate support with
M.S. cap-(type-I) logo panel etc including cutting welding, riveting, oil painting
with navy blue colour any other approved colour shade as directed and fixing Per. Unit
in cement concrete foundation including cement concrete paver block lining
including removal of surplus material/debries and restoring damaged portion
of footpath etc. as directed. (Design details vide Drg.No.4F-C1 in the
catalogue of street Furniture (Vol.I) published by M.C.G.M.)
10149.00
RT-16-36
8559.00
ROAD MARKING
RT-16-37
Providing and applying hot applied thermoplastic road marking material with
glass beads extremely high skid resistance 2.5mm thick with primer coat
(tack coat) for binding on cement concrete road/paver blocks surface. All
labour materials with special aggregates etc, as specified in B.S. part-I & II
1989 and carrying out the marking on any road on center line and other lane
marking continuous for intermittent 10cm or 15cm width and also pedestrian
crossings stripes as well as spraying further quality of glass beads of type II
uniformly into a mono layer on to the hot paint line in quick succession of the
paint spraying operation @ 250gms per sq.mt. area as directed and as per
B.S./M.O.S.T. specification in white /yellow colour
Sqm
681.00
RT-16-38
Providing and applying hot applied thermoplastic road marking material with
glass beads extremely high skid resistance 2.5mm thick without primer coat
( tack coat) on asphalt road surface. All labour materials with special
aggregates etc, as specified in B.S. part-I & II 1989 and carrying out the
marking on any road on center line and other lane marking continuous for
intermittent 10cm or 15cm width and also pedestrian crossings stripes as well
as spraying further quality of glass beads of type II uniformly into a mono
layer on to the hot paint line in quick succession of the paint spraying
operation @ 250gms per sq.mt. area as directed and as per B.S./M.O.S.T.
specification in White /Yellow colour.
Sqm
622.00
RT-16-39
Each
355.00
31
ITEM CODE
ITEM DESCRIPTION
UNIT
RATE
RT-16-40
Each
338.00
RT-16-41
Each
687.00
32