Beruflich Dokumente
Kultur Dokumente
Nickel-Chromium Alloys
Electric resistance Nichrome Alloy 80/20: it has high mechanical strength at the elevated
temperatures about 1100oC, up to which it doesnt lose oxidation resistance properties. It hardly
losses metallic properties upon heating. It is used in resistance wire, electrical resistors, employed
for heating elements in domestic and industrial applications.
Electric resistance alloy Nichrome 60/15: It is an electrical resistance alloy with the highest
operating temperature about 1000oC. It is used in heating elements for home based and industrial
applications to get high oxidation resistance.
Inconel 600: It offers outstanding resistance to chloride ion stress corrosion cracking , high
resistance to corrosion to pure water and alkaline media. It is used in chemical and food treatment,
thermal processing, tooling and apparatus, nuclear reactors and electronic components.
Inconel 601: It has high oxidation resistance and corrosion resistance at the elevated temperatures
with high mechanical strength. It is used in industrial incinerators, furnaces, petrochemical units and
other processing plants, baskets, muffles and gas turbines.
Inconel 625: Nickel-chromium-molybdenum hard alloy matrix that provides high strength without
heat processing, useful in the variety of corrosive conditions. This alloy is used in chemical plants,
aerospace and seawater engineering, pollution control devices and nuclear reactors.
Inconel 718: Excellent corrosion resistance with high tensile and creeping strength up to 700oC. High
weldability and good resistance to postweld cracking. It is used in aero-engines , gas turbines,
aerospace engineering, nuclear reactors, nuclear fuel spacers and spring.
Inconel X-750: It provides intense resistance to oxidation and resistance with high tensile and
creeping strength at temperature limits about 700oC. It is used in gas turbines, rocket engines,
nuclear reactors, pressure vessels, apparatus, and aircraft architecture.
Incoloy 800: it has higher creeping resistance. The high strength outcomes from the nearest control
of magnitudes of elements such as carbon, aluminum and titanium in combination with the elevated
temperature annealing. It is used in process piping, heat exchanger, carburizing devices, heating
element shielding and nuclear steam producer pipes.
Incoloy 800H/800HT-It is used in chemical and petrochemical processing in the power production
units for heavy duty heater and reheating tubing in commercial furnaces and heat processing
devices.
Hastelloy X:it is used in industrial furnaces, heat processing equipment and nuclear plants.
Nimonic 80A: Nickel-Chromium (Ni-Cr) alloy precipitation hardenable through inclusion of aluminum
and titanium with high corrosion resistance and oxidation resistance and high tensile and creeping
strength up to 815oC. It is used in process piping, heat exchangers, carburization apparatus, heat
processing shielding, and nuclear steam producing tubing.
Monel K500: It is a precipitation hardenable nickel-copepr alloy that has corrosion resistance similar
to alloy 400 with higher strength and hardness. It has small magnetic permeability and non magnetic
at temperatures lower than -100oC. It is used in seawater engineering, chemical and hydrocarbon
treatment equipment, and heat exchangers.
Copper-Nickel alloy 70/30: It provides very high corrosion resistance and erosion resistance. It has
highs strength and ductility, employed in areas that need high temperatures and pressures. It has
wide use in marine service, seawater power plant, desalinization plants, oil refineries and in
chemical processing, marine water tubes.
Copper-Nickel alloy 90/10: It has higher resistance to corrosion, erosion and impingement corrosion
caused by turbulent flow of water in high velocity and static water. It has good weldability. It is used
in marine service, power plants, desalinization plants, oil refineries, chemical processing industry,
seawater ductile tube.
Constantan: It has moderate resistiviy of 49 micro-ohm-cm and low temperature coefficient of
resistance with a smooth resistance-temperature plot over the broad limits. It is used in
thermocouples wires compose of iron, copper of chromel strain gauge alloy.
Permalloy 45%: It has the maximum permeability among all soft magnetic metals. It can produce
more powerful magnetic fields with nominal electric current by utilizing an electromagnet core
constructed of permalloy. It is used in susceptible relays, and AC transformers, solenoid core,
stepping motor core and components of watch.
Permalloy 78%-Permalloy offers excellent magnetic permeability, small coercivity, approximate zero
magnetostrictive properties and high anisotropic magnetoresistance. The small magnetcstriction is
crucial for commercial applications. It is used for tape core recorder, heads, motor cases and CRT
shield covers.
Nilo Iron-Nickel 42%:Low and small constant coefficient of thermal expansion from room
temperature to 350oC. It is utilized for semiconductor industrial parts, core of copper clad wire for
sealing to glass covers of electric bulbs and radio. It is used in bimetallic thermostate strip, rods,
ceramic to metal seals with alumina ceramics and different glass to metal seals.
Kovar: It is vacuum melted, iron-nickel-cobalt, low expansion with chemical composition of
controlled within small limits to ensure precise thermal expansion characteristics. It is utilized for
hermetic seals with the tougher Pyrex glasses and ceramic materials. The power tubes, microwave
tubes, transistors, diodes, IC chips etc.
Invar: It is a nickel-iron nominal expansion alloy constituted of 36% nickel. It maintains almost
constant configuration over the broad temperature limit. It has a small coefficient of expansion from
cryogenic temperatures to 260oC. It is used in measuring equipments, laser parts, bimetallic
thermostatic strip, rods, tanks and piping for storage and transportation of liquefied gases.
SuperInvar: It is a nickel-iron low expansion alloy that contains 4% cobalt with nickel in invar. It
retains constant configuration across the different temperature ranges and has nominally higher
strength as compare to invar. It is utilized in bimetallic, thermostat rods and tube assemblies for
temperature maintainers.